-# live-initramfs helper functions, used by live-initramfs on boot and by live-snapshot
+# live-boot helper functions, used by live-boot on boot and by live-snapshot
if [ ! -x "/bin/fstype" ]
then
sysblock=${1}
r=""
- for dev in "${sysblock}" "${sysblock}"/*
+ for dev in "${sysblock}"/* "${sysblock}"
do
if [ -e "${dev}/dev" ]
then
echo ${r}
}
+storage_devices()
+{
+ black_listed_devices="${1}"
+ white_listed_devices="${2}"
+
+ for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "loop|ram|fd")
+ do
+ fulldevname=$(sys2dev "${sysblock}")
+
+ if echo "${black_listed_devices}" | grep -qe "\<${fulldevname}\>" || \
+ [ -n "${white_listed_devices}" ] && \
+ echo "${white_listed_devices}" | grep -qve "\<${fulldevname}\>"
+ then
+ # skip this device entirely
+ continue
+ fi
+
+ for dev in $(subdevices "${sysblock}")
+ do
+ devname=$(sys2dev "${dev}")
+
+ if echo "${black_listed_devices}" | grep -qe "\<${devname}\>"
+ then
+ # skip this subdevice
+ continue
+ else
+ echo "${devname}"
+ fi
+ done
+ done
+}
+
is_supported_fs ()
{
fstype="${1}"
get_fstype ()
{
- local FSTYPE
- local FSSIZE
-
- # fstype misreports LUKS devices
- if is_luks "${1}"
- then
- /lib/udev/vol_id -t ${1} 2>/dev/null
- return
- fi
-
- eval $(fstype ${1} 2>/dev/null)
-
- if [ "${FSTYPE}" != "unknown" ]
- then
- echo ${FSTYPE}
- return 0
- fi
-
- /lib/udev/vol_id -t ${1} 2>/dev/null
+ /sbin/blkid -s TYPE -o value $1 2>/dev/null
}
where_is_mounted ()
local encryption=${5}
local readonly=${6}
- modprobe -q -b "${module}"
+ # the output of setup_loop is evaluated in other functions,
+ # modprobe leaks kernel options like "libata.dma=0"
+ # as "options libata dma=0" on stdout, causing serious
+ # problems therefor, so instead always avoid output to stdout
+ modprobe -q -b "${module}" 1>/dev/null
- if [ -x /sbin/udevadm ]
- then
- # lenny
- udevadm settle
- else
- # etch
- udevsettle
- fi
+ udevadm settle
for loopdev in ${pattern}
do
fi
fi
- if [ 0 -lt "${offset}" ]
+ if [ -n "${offset}" ] && [ 0 -lt "${offset}" ]
then
options="${options} -o ${offset}"
fi
then
fstype=$(get_fstype "${dev}")
fi
- mount -t "${fstype}" -o "${opts}" "${dev}" "${mountp}" || panic "Cannot mount ${dev} on ${mountp}, fstype=${fstype}, options=${opts}"
+ mount -t "${fstype}" -o "${opts}" "${dev}" "${mountp}" || \
+ ( echo "SKIPPING: Cannot mount ${dev} on ${mountp}, fstype=${fstype}, options=${opts}" > live-boot.log && return 0 )
fi
}
-find_cow_device ()
+open_luks_device ()
{
- # Returns a device containing a partition labeled "${pers_label}" or containing a file named the same way
- # in the latter case the partition containing the file is left mounted
- # if is not in black_listed_devices
- pers_label="${1}"
- cow_backing="/${pers_label}-backing"
- black_listed_devices="${2}"
-
- if [ -z "${PERSISTENT_PATH}" ]
+ dev="${1}"
+ name="$(basename ${dev})"
+ opts="--key-file=-"
+ if [ -n "${PERSISTENT_READONLY}" ]
then
- pers_fpath=${cow_backing}/${pers_label}
- else
- pers_fpath=${cow_backing}/${PERSISTENT_PATH}/${pers_label}
+ opts="${opts} --readonly"
fi
- for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -v loop | grep -v ram | grep -v fd)
- do
- for dev in $(subdevices "${sysblock}")
- do
- devname=$(sys2dev "${dev}")
-
- if echo "${black_listed_devices}" | grep -q "${devname}"
- then
- # skip this device enterely
- break
- fi
-
- # Checking for a luks device
- if [ -e /sbin/cryptsetup ] && /sbin/cryptsetup isLuks ${devname}
- then
- while true
- do
- load_keymap
-
- echo -n "Enter passphrase for ${pers_label} on ${devname}: " >&6
- read -s passphrase
- echo "${passphrase}" > /tmp/passphrase
- unset passphrase
- exec 9</tmp/passphrase
- /sbin/cryptsetup luksOpen ${devname} $(basename ${devname})
- error=${?}
- exec 9<&-
- rm -f /tmp/passphrase
-
- devname="/dev/mapper/$(basename ${devname})"
-
- if [ 0 -eq ${error} ]
- then
- unset error
- break
- fi
-
- echo
- echo -n "There was an error decrypting ${devname} ... Retry? [Y/n] " >&6
- read answer
-
- if [ "$(echo "${answer}" | cut -b1 | tr A-Z a-z)" = "n" ]
- then
- unset answer
- break
- fi
- done
- fi
+ load_keymap
- if [ "$(/lib/udev/vol_id -l ${devname} 2>/dev/null)" = "${pers_label}" ]
- then
- echo "${devname}"
- return 0
- fi
+ while true
+ do
+ /lib/cryptsetup/askpass "Enter passphrase for ${dev}: " | \
+ /sbin/cryptsetup -T 1 luksOpen ${dev} ${name} ${opts}
- if [ "${PERSISTENT}" = "nofiles" ]
- then
- # do not mount the device to find for image files
- # just skip this
- break
- fi
+ if [ 0 -eq ${?} ]
+ then
+ luks_device="/dev/mapper/${name}"
+ echo ${luks_device}
+ return 0
+ fi
- case "$(get_fstype ${devname})" in
- vfat|ext2|ext3|ext4|jffs2)
- mkdir -p "${cow_backing}"
- if ! try_mount "${devname}" "${cow_backing}" "rw"
- then
- break
- fi
+ echo >&6
+ echo -n "There was an error decrypting ${dev} ... Retry? [Y/n] " >&6
+ read answer
- if [ -f "${pers_fpath}" ]
- then
- echo $(setup_loop "${pers_fpath}" "loop" "/sys/block/loop*")
- return 0
- else
- umount ${cow_backing}
- fi
- ;;
- *)
- ;;
- esac
- done
+ if [ "$(echo "${answer}" | cut -b1 | tr A-Z a-z)" = "n" ]
+ then
+ return 2
+ fi
done
- return 1
}
-find_files ()
+find_persistent_media ()
{
- # return the a string composed by device name, mountpoint an the first of ${filenames} found on a supported partition
- # FIXME: merge with above function
-
- filenames="${1}"
- snap_backing="/snap-backing"
- black_listed_devices="${2}"
-
- for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -v loop | grep -v ram | grep -v fd)
+ # Scans devices for overlays and snapshots, and returns a whitespace
+ # separated list of how to use them. Only overlays with a partition
+ # label or file name in ${overlays} are returned, and ditto for
+ # snapshots with labels in ${snapshots}.
+ #
+ # When scanning a LUKS device, the user will be asked to enter the
+ # passphrase; on failure to enter it, or if no persistent partitions
+ # or files were found, the LUKS device is closed.
+ #
+ # For a snapshot file the return value is ${label}=${snapdata}", where
+ # ${snapdata} is the parameter used for try_snap().
+ #
+ # For all other cases (overlay/snapshot partition and overlay file) the
+ # return value is "${label}=${device}", where ${device} a device that
+ # can mount the content. In the case of an overlay file, the device
+ # containing the file will remain mounted as a side-effect.
+ #
+ # No devices in ${black_listed_devices} will be scanned, and if
+ # ${white_list_devices} is non-empty, only devices in it will be
+ # scanned.
+
+ overlays="${1}"
+ snapshots="${2}"
+ black_listed_devices="${3}"
+ white_listed_devices="${4}"
+
+ for dev in $(storage_devices "${black_listed_devices}" "${white_listed_devices}")
do
- for dev in $(subdevices "${sysblock}")
- do
- devname=$(sys2dev "${dev}")
- devfstype="$(get_fstype ${devname})"
+ luks_device=""
- if echo "${black_listed_devices}" | grep -q "${devname}"
+ # Checking for a luks device
+ if echo ${PERSISTENT_ENCRYPTION} | grep -qe "\<luks\>" && \
+ /sbin/cryptsetup isLuks ${dev}
+ then
+ if luks_device=$(open_luks_device "${dev}")
then
- # skip this device enterely
- break
+ dev="${luks_device}"
+ else
+ # skip $dev since we failed/chose not to open it
+ continue
fi
+ elif echo ${PERSISTENT_ENCRYPTION} | grep -qve "\<none\>"
+ then
+ # skip $dev since we don't allow unencrypted storage
+ continue
+ fi
+
+ if echo ${PERSISTENT_STORAGE} | grep -qe "\<filesystem\>"
+ then
+ for label in ${overlays} ${snapshots}
+ do
+ if [ "$(/sbin/blkid -s LABEL -o value $dev 2>/dev/null)" = "${label}" ]
+ then
+ overlays=$(echo ${overlays} | sed -e "s|\<${label}\>||")
+ snapshots=$(echo ${snapshots} | sed -e "s|\<${label}\>||")
+ echo "${label}=${dev}"
+ # skip to the next device
+ continue 2
+ fi
+ done
+ fi
- if is_supported_fs ${devfstype}
+ if echo ${PERSISTENT_STORAGE} | grep -qe "\<file\>"
+ then
+ devfstype="$(get_fstype ${dev})"
+ overlay_on_dev=""
+ snapshot_on_dev=""
+ backing="/$(basename ${dev})-backing"
+ mkdir -p "${backing}"
+ if is_supported_fs ${devfstype} && try_mount "${dev}" "${backing}" "rw" "${devfstype}"
then
- mkdir -p "${snap_backing}"
+ for label in ${overlays}
+ do
+ path=${backing}/${PERSISTENT_PATH}${label}
+ if [ -f "${path}" ]
+ then
+ overlays=$(echo ${overlays} | sed -e "s|\<${label}\>||")
+ overlay_on_dev="yes"
+ echo "${label}=$(setup_loop "${path}" "loop" "/sys/block/loop*")"
+ fi
+ done
- if try_mount "${devname}" "${snap_backing}" "ro" "${devfstype}"
- then
- for filename in ${filenames}
+ for label in ${snapshots}
+ do
+ for ext in squashfs cpio.gz ext2 ext3 ext4 jffs2
do
- if [ -f "${snap_backing}/${filename}" ]
+ path="${PERSISTENT_PATH}${label}.${ext}"
+ if [ -f "${backing}/${path}" ]
then
- echo "${devname} ${snap_backing} ${filename}"
- umount ${snap_backing}
- return 0
+ snapshots=$(echo ${snapshots} | sed -e "s|\<${label}\>||")
+ snapshot_on_dev="yes"
+ echo "${label}=${dev}:${backing}:${path}"
fi
done
+ done
+ fi
+ if [ -z "${overlay_on_dev}" ]
+ then
+ umount ${backing} > /dev/null 2>&1 || true
+ if [ -z "${snapshot_on_dev}" ] && [ -n "${luks_device}" ] && /sbin/cryptsetup status "${luks_device}" 1> /dev/null
+ then
+ /sbin/cryptsetup luksClose "${luks_device}"
fi
-
- umount ${snap_backing}
fi
- done
+ fi
done
}
fi
}
+
+removable_dev ()
+{
+ output_format="${1}"
+ want_usb="${2}"
+ ret=
+
+ for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)")
+ do
+ dev_ok=
+ if [ "$(cat ${sysblock}/removable)" = "1" ]
+ then
+ if [ -z "${want_usb}" ]
+ then
+ dev_ok="yes"
+ else
+ if readlink ${sysblock} | grep -q usb
+ then
+ dev_ok="yes"
+ fi
+ fi
+ fi
+
+ if [ "${dev_ok}" = "yes" ]
+ then
+ case "${output_format}" in
+ sys)
+ ret="${ret} ${sysblock}"
+ ;;
+ *)
+ devname=$(sys2dev "${sysblock}")
+ ret="${ret} ${devname}"
+ ;;
+ esac
+ fi
+ done
+
+ echo "${ret}"
+}
+
+removable_usb_dev ()
+{
+ output_format="${1}"
+
+ removable_dev "${output_format}" "want_usb"
+}
+
+non_removable_dev ()
+{
+ output_format="${1}"
+ ret=
+
+ for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)")
+ do
+ if [ "$(cat ${sysblock}/removable)" = "0" ]
+ then
+ case "${output_format}" in
+ sys)
+ ret="${ret} ${sysblock}"
+ ;;
+ *)
+ devname=$(sys2dev "${sysblock}")
+ ret="${ret} ${devname}"
+ ;;
+ esac
+ fi
+ done
+
+ echo "${ret}"
+}
projects / live-boot-grml.git / blobdiff