the directory are executed.
grml config=path-name Unpack archive that path-name points to
grml noautoconfig Disable searching for device labeled GRMLCFG
+grml nobeep Disable welcome chime, sounded before grml-quickconfig starts.
Notice: Take a look at http://grml.org/config/ and 'man 1 grml-autoconfig'
for more information regarding the configuration framework of Grml.
grml nogpm Disable GPM daemon
grml noconsolefont Disable setting of console font (using consolechars)
grml noblank Disable console blanking
-grml tsplash Text based bootsplash
grml noquick Disable grml-quickconfig startup script
grml small Do not start that many consoles
grml wondershaper=eth0,1000,500 Set up basic traffic shaping
startup of X again. (This bootoption is relevant for grml based derivatives
which decide to enable startx by default only, plain grml does not use
automatic startup of X by default.)
+grml vnc=password Start VNC server with startup of X.org and sets the password to the specified
+ one. To automatically start the VNC server use the startx bootopion.
+grml vnc_connect=host[:port] Connect to a listening VNC client ("vncviewer -listen" reverse connection).
+ Can be used to connect from devices behind firewalls as connection is
+ initiated from the VNC server instead of the VNC client. Has to be
+ combined with the vnc bootoption.
+ [Note: only available since release 2011.12]
+
Hardware related settings:
--------------------------
grml xmodule=ati|fbdev|i810|mga Use specified X.org-Module (1)
grml xmodule=nv|radeon|savage|s3 Use specified X.org-Module (2)
grml xmodule=radeon|svga|i810 Use specified X.org-Module (3)
-grml no{acpi,agp,apm,cpu,dhcp} Skip parts of HW-detection (1)
+grml no{acpi,agp,cpu,dhcp} Skip parts of HW-detection (1)
grml no{dma,fstab,modem} Skip parts of HW-detection (2)
grml no{pcmcia,scsi,swap,usb} Skip parts of HW-detection (3)
-grml 915resolution=... Start resolution modify tool for Intel graphic chipset
- usage: $MODE,$XRESO,$YRESO
grml blacklist=modulename[,module2] Completely disable loading of specified module(s) via
blacklisting through udev's /etc/modprobe.d/grml
grml fwtimeout=50 Set firmware timeout via /sys/class/firmware/timeout to specified value
grml micvol=number Set mixer volume of microphone to level $number (default: 0)
grml pnpbios=off No PnP Bios initialization
grml acpi=off Disable ACPI Bios completely
-grml nousb2 Disable initialization of USB 2.x controller(s)
-grml nousb Disable initialization of USB in booting sequence
grml nofirewire Disable initialization of firewire devices in booting sequence
grml pci=irqmask=0x0e98 Try this, if PS/2 mouse doesn't work *)
grml pci=bios Workaround for bad PCI controllers
*) In case of a failing hardware autodetection, try booting with any of
the "no-" options as shown in the table above, like in
- grml noagp noapm noapic acpi=off nodma
+ grml noagp noapic acpi=off nodma
to skip some critical parts of the autodetection system.
*) Some boards (especially those with E-ISA slots) apparently don't pass