then \
for SCRIPT in $(SCRIPTS); \
do \
- checkbashisms $${SCRIPT} || true; \
+ checkbashisms -f -x $${SCRIPT} || true; \
echo -n "."; \
done; \
else \
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 7 30.05.2010 2.0~a3 "Debian Live Projekt"
+.TH LIVE\-BOOT 7 02.06.2010 2.0~a4 "Debian Live Projekt"
.SH NAME
\fBlive\-boot\fP \- System Boot Skripte
Also note that therefore it's currently not possible to fetch an image from
a namebased virtualhost of an httpd if it is sharing the ip with the main
httpd instance.
-.IP "\fBhostname\fP=\fIHOSTNAME\fP, \fBusername\fP=\fIUSER\fP, \fBuserfullname\fP=\fIUSERFULLNAME\fP" 4
-Those parameters lets you override values read from the config file.
.IP \fBignore_uuid\fP 4
Do not check that any UUID embedded in the initramfs matches the discovered
medium. live\-boot may be told to generate a UUID by setting
.IP \fBlive\-media\-timeout\fP=\fISECONDS\fP 4
Set the timeout in seconds for the device specified by "live\-media=" to
become ready before giving up.
-.IP {\fBlocale\fP|\fBdebian\-installer/locale\fP}=\fILOCALE\fP 4
-Configure the running locale as specified, if not present the live\-media
-rootfs configured locale will be used and if also this one misses live\-boot
-behave as "locale=en_US.UTF\-8" was specified. If only 2 lowercase letter are
-specified (like "it"), the "maybe wanted" locale is generated (like
-en:EN.UTF\-8), in this case if also "keyb=" is unspecified is set with those
-2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales are
-supported by live\-boot.
.IP \fBmodule\fP=\fINAME\fP 4
Instead of using the default optional file "filesystem.module" (see below)
another file could be specified without the extension ".module"; it should
filesystem. With no args, will try cifs first, and if it fails nfs.
.IP \fBnfsopts\fP= 4
This lets you specify custom nfs options.
-.IP \fBnoautologin\fP 4
-This parameter disables the automatic terminal login only, not touching
-gdk/kdm.
-.IP \fBnoxautologin\fP 4
-This parameter disables the automatic login of gdm/kdm only, not touching
-terminals.
.IP \fBnofastboot\fP 4
This parameter disables the default disabling of filesystem checks in
/etc/fstab. If you have static filesystems on your harddisk and you want
has been installed with persistent enabled.
.IP \fBnoprompt\fP 4
Do not prompt to eject the CD or remove the USB flash drive on reboot.
-.IP \fBnosudo\fP 4
-This parameter disables the automatic configuration of sudo.
.IP \fBswapon\fP 4
This parameter enables usage of local swap partitions.
-.IP \fBnouser\fP 4
-This parameter disables the creation of the default user completely.
.IP \fBnoxautoconfig\fP 4
This parameter disables Xorg auto\-reconfiguration at boot time. This is
valuable if you either do the detection on your own, or, if you want to ship
of its own. When adding silent, it hides all.
.IP \fBtextonly\fP 4
Start up to text\-mode shell prompts, disabling the graphical user interface.
-.IP \fBtimezone\fP=\fITIMEZONE\fP 4
-By default, timezone is set to UTC. Using the timezone parameter, you can
-set it to your local zone, e.g. Europe/Zurich.
.IP \fBtodisk\fP=\fIDEVICE\fP 4
Adding this parameter, live\-boot will try to copy the entire read\-only media
to the specified device before mounting the root filesystem. It probably
.IP \fBunion\fP=aufs|unionfs 4
By default, live\-boot uses aufs. With this parameter, you can switch to
unionfs.
-.IP \fButc\fP=yes|no 4
-By default, Debian systems do assume that the hardware clock is set to
-UTC. You can change or explicitly set it with this parameter.
.IP \fBxdebconf\fP 4
Uses xdebconfigurator, if present on the rootfs, to configure X instead of
the standard procedure (experimental).
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 1 30.05.2010 2.0~a3 "Debian Live Projekt"
+.TH LIVE\-BOOT 1 02.06.2010 2.0~a4 "Debian Live Projekt"
.SH NAME
\fBlive\-snapshot\fP \- simple script to ease persistence usage
-.TH LIVE\-BOOT 7 2010\-05\-30 2.0~a3 "Debian Live Project"
+.TH LIVE\-BOOT 7 2010\-06\-02 2.0~a4 "Debian Live Project"
.SH NAME
\fBlive\-boot\fR \- System Boot Scripts
Working: http://1.2.3.4/path/to/your_filesystem.squashfs
.br
Also note that therefore it's currently not possible to fetch an image from a namebased virtualhost of an httpd if it is sharing the ip with the main httpd instance.
-.IP "\fBhostname\fR=\fIHOSTNAME\fR, \fBusername\fR=\fIUSER\fR, \fBuserfullname\fR=\fIUSERFULLNAME\fR" 4
-Those parameters lets you override values read from the config file.
.IP "\fBignore_uuid\fR" 4
Do not check that any UUID embedded in the initramfs matches the discovered medium. live\-boot may be told to generate a UUID by setting LIVE_GENERATE_UUID=1 when building the initramfs.
.IP "\fBintegrity\-check\fR" 4
Sets the path to the live filesystem on the medium. By default, it is set to '/live' and you should not change that unless you have customized your media accordingly.
.IP "\fBlive\-media\-timeout\fR=\fISECONDS\fI" 4
Set the timeout in seconds for the device specified by "live\-media=" to become ready before giving up.
-.IP "{\fBlocale\fR|\fBdebian\-installer/locale\fR}=\fILOCALE\fR" 4
-Configure the running locale as specified, if not present the live\-media rootfs configured locale will be used and if also this one misses live\-boot behave as "locale=en_US.UTF\-8" was specified. If only 2 lowercase letter are specified (like "it"), the "maybe wanted" locale is generated (like en:EN.UTF\-8), in this case if also "keyb=" is unspecified is set with those 2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales are supported by live\-boot.
.IP "\fBmodule\fR=\fINAME\fR" 4
Instead of using the default optional file "filesystem.module" (see below) another file could be specified without the extension ".module"; it should be placed on "/live" directory of the live medium.
.IP "\fBnetboot\fR[=nfs|cifs]" 4
This tells live\-boot to perform a network mount. The parameter "nfsroot=" (with optional "nfsopts="), should specify where is the location of the root filesystem. With no args, will try cifs first, and if it fails nfs.
.IP "\fBnfsopts\fR=" 4
This lets you specify custom nfs options.
-.IP "\fBnoautologin\fR" 4
-This parameter disables the automatic terminal login only, not touching gdk/kdm.
-.IP "\fBnoxautologin\fR" 4
-This parameter disables the automatic login of gdm/kdm only, not touching terminals.
.IP "\fBnofastboot\fR" 4
This parameter disables the default disabling of filesystem checks in /etc/fstab. If you have static filesystems on your harddisk and you want them to be checked at boot time, use this parameter, otherwise they are skipped.
.IP "\fBnopersistent\fR" 4
disables the "persistent" feature, useful if the bootloader (like syslinux) has been installed with persistent enabled.
.IP "\fBnoprompt\fR" 4
Do not prompt to eject the CD or remove the USB flash drive on reboot.
-.IP "\fBnosudo\fR" 4
-This parameter disables the automatic configuration of sudo.
.IP "\fBswapon\fR" 4
This parameter enables usage of local swap partitions.
-.IP "\fBnouser\fR" 4
-This parameter disables the creation of the default user completely.
.IP "\fBnoxautoconfig\fR" 4
This parameter disables Xorg auto\-reconfiguration at boot time. This is valuable if you either do the detection on your own, or, if you want to ship a custom, premade xorg.conf in your live system.
.IP "\fBpersistent\fR[=nofiles]" 4
If you boot with the normal quiet parameter, live\-boot hides most messages of its own. When adding silent, it hides all.
.IP "\fBtextonly\fR" 4
Start up to text\-mode shell prompts, disabling the graphical user interface.
-.IP "\fBtimezone\fR=\fITIMEZONE\fR" 4
-By default, timezone is set to UTC. Using the timezone parameter, you can set it to your local zone, e.g. Europe/Zurich.
.IP "\fBtodisk\fR=\fIDEVICE\fR" 4
Adding this parameter, live\-boot will try to copy the entire read\-only media to the specified device before mounting the root filesystem. It probably needs a lot of free space. Subsequent boots should then skip this step and just specify the "live\-media=DEVICE" boot parameter with the same DEVICE used this time.
.IP "\fBtoram\fR" 4
Adding this parameter, live\-boot will try to copy the whole read\-only media to the computer's RAM before mounting the root filesystem. This could need a lot of ram, according to the space used by the read\-only media.
.IP "\fBunion\fR=aufs|unionfs\fR" 4
By default, live\-boot uses aufs. With this parameter, you can switch to unionfs.
-.IP "\fButc\fR=yes|no" 4
-By default, Debian systems do assume that the hardware clock is set to UTC. You can change or explicitly set it with this parameter.
.IP "\fBxdebconf\fR" 4
Uses xdebconfigurator, if present on the rootfs, to configure X instead of the standard procedure (experimental).
.IP "\fBxvideomode\fR=\fIRESOLUTION\fR" 4
-.TH LIVE\-BOOT 1 2010\-05\-30 2.0~a3 "Debian Live Project"
+.TH LIVE\-BOOT 1 2010\-06\-02 2.0~a4 "Debian Live Project"
.SH NAME
\fBlive\-snapshot\fR \- simple script to ease persistence usage
#
msgid ""
msgstr ""
-"Project-Id-Version: live-boot 2.0~a3\n"
-"POT-Creation-Date: 2010-05-30 09:26+0300\n"
+"Project-Id-Version: live-boot 2.0~a4\n"
+"POT-Creation-Date: 2010-06-02 22:46+0300\n"
"PO-Revision-Date: 2010-05-24 12:34+0300\n"
"Last-Translator: Daniel Baumann <daniel@debian.org>\n"
"Language-Team: none\n"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2010-05-30"
-msgstr "30.05.2010"
+msgid "2010-06-02"
+msgstr "02.06.2010"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2.0~a3"
-msgstr "2.0~a3"
+msgid "2.0~a4"
+msgstr "2.0~a4"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#. type: IP
#: en/live-boot.7:43
#, no-wrap
-msgid "B<hostname>=I<HOSTNAME>, B<username>=I<USER>, B<userfullname>=I<USERFULLNAME>"
-msgstr "B<hostname>=I<HOSTNAME>, B<username>=I<USER>, B<userfullname>=I<USERFULLNAME>"
-
-#. type: Plain text
-#: en/live-boot.7:45
-msgid "Those parameters lets you override values read from the config file."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:45
-#, no-wrap
msgid "B<ignore_uuid>"
msgstr "B<ignore_uuid>"
#. type: Plain text
-#: en/live-boot.7:47
+#: en/live-boot.7:45
msgid ""
"Do not check that any UUID embedded in the initramfs matches the discovered "
"medium. live-boot may be told to generate a UUID by setting "
msgstr ""
#. type: IP
-#: en/live-boot.7:47
+#: en/live-boot.7:45
#, no-wrap
msgid "B<integrity-check>"
msgstr "B<integrity-check>"
#. type: Plain text
-#: en/live-boot.7:49
+#: en/live-boot.7:47
msgid ""
"If specified, an MD5 sum is calculated on the live media during boot and "
"compared to the value found in md5sum.txt found in the root directory of the "
msgstr ""
#. type: IP
-#: en/live-boot.7:49
+#: en/live-boot.7:47
#, no-wrap
msgid "B<ip>=[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>] [,[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>]]"
msgstr "B<ip>=[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>] [,[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>]]"
#. type: Plain text
-#: en/live-boot.7:51
+#: en/live-boot.7:49
msgid ""
"Let you specify the name(s) and the options of the interface(s) that should "
"be configured at boot time. Do not specify this if you want to use dhcp "
msgstr ""
#. type: IP
-#: en/live-boot.7:51
+#: en/live-boot.7:49
#, no-wrap
msgid "B<ip>=[I<frommedia>]"
msgstr "B<ip>=[I<frommedia>]"
#. type: Plain text
-#: en/live-boot.7:53
+#: en/live-boot.7:51
msgid ""
"If this variable is set, dhcp and static configuration are just skipped and "
"the system will use the (must be) media-preconfigured /etc/network/"
msgstr ""
#. type: IP
-#: en/live-boot.7:53
+#: en/live-boot.7:51
#, no-wrap
msgid "{B<keyb>|B<kbd-chooser/method>}=I<KEYBOARD>, {B<klayout>|B<console-setup/layoutcode>}=I<LAYOUT>, {B<kvariant>|B<console-setup/variantcode>}=I<VARIANT>, {B<kmodel>I<|>B<console-setup/modelcode>}=I<CODE>, B<koptions>=I<OPTIONS>"
msgstr "{B<keyb>|B<kbd-chooser/method>}=I<KEYBOARD>, {B<klayout>|B<console-setup/layoutcode>}=I<LAYOUT>, {B<kvariant>|B<console-setup/variantcode>}=I<VARIANT>, {B<kmodel>I<|>B<console-setup/modelcode>}=I<CODE>, B<koptions>=I<OPTIONS>"
#. type: Plain text
-#: en/live-boot.7:55
+#: en/live-boot.7:53
msgid ""
"Configure the running keyboard as specified, if this one misses live-boot "
"behaves as if \"keyb=us\" was specified. It will be interfered from \"locale="
msgstr ""
#. type: IP
-#: en/live-boot.7:55
+#: en/live-boot.7:53
#, no-wrap
msgid "B<live-getty>"
msgstr "B<live-getty>"
#. type: Plain text
-#: en/live-boot.7:57
+#: en/live-boot.7:55
msgid ""
"This changes the auto-login on virtual terminals to use the (experimental) "
"live-getty code. With this option set the standard kernel argument \"console="
msgstr ""
#. type: IP
-#: en/live-boot.7:57
+#: en/live-boot.7:55
#, no-wrap
msgid "{B<live-media>|B<bootfrom>}=I<DEVICE>"
msgstr "{B<live-media>|B<bootfrom>}=I<DEVICE>"
#. type: Plain text
-#: en/live-boot.7:59
+#: en/live-boot.7:57
msgid ""
"If you specify one of this two equivalent forms, live-boot will first try to "
"find this device for the \"/live\" directory where the read-only root "
msgstr ""
#. type: Plain text
-#: en/live-boot.7:61
+#: en/live-boot.7:59
msgid ""
"Instead of specifing an actual device name, the keyword 'removable' can be "
"used to limit the search of acceptable live media to removable type only. "
msgstr ""
#. type: IP
-#: en/live-boot.7:61
+#: en/live-boot.7:59
#, no-wrap
msgid "{B<live-media-encryption>|B<encryption>}=I<TYPE>"
msgstr "{B<live-media-encryption>|B<encryption>}=I<TYPE>"
#. type: Plain text
-#: en/live-boot.7:63
+#: en/live-boot.7:61
msgid ""
"live-boot will mount the encrypted rootfs TYPE, asking the passphrase, "
"useful to build paranoid live systems :-). TYPE supported so far are \"aes\" "
msgstr ""
#. type: IP
-#: en/live-boot.7:63
+#: en/live-boot.7:61
#, no-wrap
msgid "B<live-media-offset>=I<BYTES>"
msgstr "B<live-media-offset>=I<BYTES>"
#. type: Plain text
-#: en/live-boot.7:65
+#: en/live-boot.7:63
msgid ""
"This way you could tell live-boot that your image starts at offset BYTES in "
"the above specified or autodiscovered device, this could be useful to hide "
msgstr ""
#. type: IP
-#: en/live-boot.7:65
+#: en/live-boot.7:63
#, no-wrap
msgid "B<live-media-path>=I<PATH>"
msgstr "B<live-media-path>=I<PATH>"
#. type: Plain text
-#: en/live-boot.7:67
+#: en/live-boot.7:65
msgid ""
"Sets the path to the live filesystem on the medium. By default, it is set to "
"'/live' and you should not change that unless you have customized your media "
msgstr ""
#. type: IP
-#: en/live-boot.7:67
+#: en/live-boot.7:65
#, no-wrap
msgid "B<live-media-timeout>=I<SECONDS>"
msgstr "B<live-media-timeout>=I<SECONDS>"
#. type: Plain text
-#: en/live-boot.7:69
+#: en/live-boot.7:67
msgid ""
"Set the timeout in seconds for the device specified by \"live-media=\" to "
"become ready before giving up."
msgstr ""
#. type: IP
-#: en/live-boot.7:69
-#, no-wrap
-msgid "{B<locale>|B<debian-installer/locale>}=I<LOCALE>"
-msgstr "{B<locale>|B<debian-installer/locale>}=I<LOCALE>"
-
-#. type: Plain text
-#: en/live-boot.7:71
-msgid ""
-"Configure the running locale as specified, if not present the live-media "
-"rootfs configured locale will be used and if also this one misses live-boot "
-"behave as \"locale=en_US.UTF-8\" was specified. If only 2 lowercase letter "
-"are specified (like \"it\"), the \"maybe wanted\" locale is generated (like "
-"en:EN.UTF-8), in this case if also \"keyb=\" is unspecified is set with "
-"those 2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales "
-"are supported by live-boot."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:71
+#: en/live-boot.7:67
#, no-wrap
msgid "B<module>=I<NAME>"
msgstr "B<module>=I<NAME>"
#. type: Plain text
-#: en/live-boot.7:73
+#: en/live-boot.7:69
msgid ""
"Instead of using the default optional file \"filesystem.module\" (see below) "
"another file could be specified without the extension \".module\"; it should "
msgstr ""
#. type: IP
-#: en/live-boot.7:73
+#: en/live-boot.7:69
#, no-wrap
msgid "B<netboot>[=nfs|cifs]"
msgstr "B<netboot>[=nfs|cifs]"
#. type: Plain text
-#: en/live-boot.7:75
+#: en/live-boot.7:71
msgid ""
"This tells live-boot to perform a network mount. The parameter \"nfsroot="
"\" (with optional \"nfsopts=\"), should specify where is the location of the "
msgstr ""
#. type: IP
-#: en/live-boot.7:75
+#: en/live-boot.7:71
#, no-wrap
msgid "B<nfsopts>="
msgstr "B<nfsopts>="
#. type: Plain text
-#: en/live-boot.7:77
+#: en/live-boot.7:73
msgid "This lets you specify custom nfs options."
msgstr ""
#. type: IP
-#: en/live-boot.7:77
-#, no-wrap
-msgid "B<noautologin>"
-msgstr "B<noautologin>"
-
-#. type: Plain text
-#: en/live-boot.7:79
-msgid ""
-"This parameter disables the automatic terminal login only, not touching gdk/"
-"kdm."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:79
-#, no-wrap
-msgid "B<noxautologin>"
-msgstr "B<noxautologin>"
-
-#. type: Plain text
-#: en/live-boot.7:81
-msgid ""
-"This parameter disables the automatic login of gdm/kdm only, not touching "
-"terminals."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:81
+#: en/live-boot.7:73
#, no-wrap
msgid "B<nofastboot>"
msgstr "B<nofastboot>"
#. type: Plain text
-#: en/live-boot.7:83
+#: en/live-boot.7:75
msgid ""
"This parameter disables the default disabling of filesystem checks in /etc/"
"fstab. If you have static filesystems on your harddisk and you want them to "
msgstr ""
#. type: IP
-#: en/live-boot.7:83
+#: en/live-boot.7:75
#, no-wrap
msgid "B<nopersistent>"
msgstr "B<nopersistent>"
#. type: Plain text
-#: en/live-boot.7:85
+#: en/live-boot.7:77
msgid ""
"disables the \"persistent\" feature, useful if the bootloader (like "
"syslinux) has been installed with persistent enabled."
msgstr ""
#. type: IP
-#: en/live-boot.7:85
+#: en/live-boot.7:77
#, no-wrap
msgid "B<noprompt>"
msgstr "B<noprompt>"
#. type: Plain text
-#: en/live-boot.7:87
+#: en/live-boot.7:79
msgid "Do not prompt to eject the CD or remove the USB flash drive on reboot."
msgstr ""
#. type: IP
-#: en/live-boot.7:87
-#, no-wrap
-msgid "B<nosudo>"
-msgstr "B<nosudo>"
-
-#. type: Plain text
-#: en/live-boot.7:89
-msgid "This parameter disables the automatic configuration of sudo."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:89
+#: en/live-boot.7:79
#, no-wrap
msgid "B<swapon>"
msgstr "B<swapon>"
#. type: Plain text
-#: en/live-boot.7:91
+#: en/live-boot.7:81
msgid "This parameter enables usage of local swap partitions."
msgstr ""
#. type: IP
-#: en/live-boot.7:91
-#, no-wrap
-msgid "B<nouser>"
-msgstr "B<nouser>"
-
-#. type: Plain text
-#: en/live-boot.7:93
-msgid "This parameter disables the creation of the default user completely."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:93
+#: en/live-boot.7:81
#, no-wrap
msgid "B<noxautoconfig>"
msgstr "B<noxautoconfig>"
#. type: Plain text
-#: en/live-boot.7:95
+#: en/live-boot.7:83
msgid ""
"This parameter disables Xorg auto-reconfiguration at boot time. This is "
"valuable if you either do the detection on your own, or, if you want to ship "
msgstr ""
#. type: IP
-#: en/live-boot.7:95
+#: en/live-boot.7:83
#, no-wrap
msgid "B<persistent>[=nofiles]"
msgstr "B<persistent>[=nofiles]"
#. type: Plain text
-#: en/live-boot.7:97
+#: en/live-boot.7:85
msgid ""
"live-boot will look for persistent and snapshot partitions or files labeled "
"\"live-rw\", \"home-rw\", and files called \"live-sn*\", \"home-sn*\" and "
msgstr ""
#. type: IP
-#: en/live-boot.7:97
+#: en/live-boot.7:85
#, no-wrap
msgid "B<persistent-path>=I<PATH>"
msgstr "B<persistent-path>=I<PATH>"
#. type: Plain text
-#: en/live-boot.7:99
+#: en/live-boot.7:87
msgid ""
"live-boot will look for persistency files in the root directory of a "
"partition, with this parameter, the path can be configured so that you can "
msgstr ""
#. type: IP
-#: en/live-boot.7:99
+#: en/live-boot.7:87
#, no-wrap
msgid "{B<preseed/file>|B<file>}=I<FILE>"
msgstr "{B<preseed/file>|B<file>}=I<FILE>"
#. type: Plain text
-#: en/live-boot.7:101
+#: en/live-boot.7:89
msgid ""
"A path to a file present on the rootfs could be used to preseed debconf "
"database."
msgstr ""
#. type: IP
-#: en/live-boot.7:101
+#: en/live-boot.7:89
#, no-wrap
msgid "B<package/question>=I<VALUE>"
msgstr "B<package/question>=I<VALUE>"
#. type: Plain text
-#: en/live-boot.7:103
+#: en/live-boot.7:91
msgid ""
"All debian installed packages could be preseeded from command-line that way, "
"beware of blanks spaces, they will interfere with parsing, use a preseed "
msgstr ""
#. type: IP
-#: en/live-boot.7:103
+#: en/live-boot.7:91
#, no-wrap
msgid "B<quickreboot>"
msgstr "B<quickreboot>"
#. type: Plain text
-#: en/live-boot.7:105
+#: en/live-boot.7:93
msgid ""
"This option causes live-boot to reboot without attempting to eject the media "
"and without asking the user to remove the boot media."
msgstr ""
#. type: IP
-#: en/live-boot.7:105
+#: en/live-boot.7:93
#, no-wrap
msgid "B<showmounts>"
msgstr "B<showmounts>"
#. type: Plain text
-#: en/live-boot.7:107
+#: en/live-boot.7:95
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
"(mostly compressed) on \"/live\". This is not enabled by default because "
msgstr ""
#. type: IP
-#: en/live-boot.7:107
+#: en/live-boot.7:95
#, no-wrap
msgid "B<silent>"
msgstr "B<silent>"
#. type: Plain text
-#: en/live-boot.7:109
+#: en/live-boot.7:97
msgid ""
"If you boot with the normal quiet parameter, live-boot hides most messages "
"of its own. When adding silent, it hides all."
msgstr ""
#. type: IP
-#: en/live-boot.7:109
+#: en/live-boot.7:97
#, no-wrap
msgid "B<textonly>"
msgstr "B<textonly>"
#. type: Plain text
-#: en/live-boot.7:111
+#: en/live-boot.7:99
msgid ""
"Start up to text-mode shell prompts, disabling the graphical user interface."
msgstr ""
#. type: IP
-#: en/live-boot.7:111
-#, no-wrap
-msgid "B<timezone>=I<TIMEZONE>"
-msgstr "B<timezone>=I<TIMEZONE>"
-
-#. type: Plain text
-#: en/live-boot.7:113
-msgid ""
-"By default, timezone is set to UTC. Using the timezone parameter, you can "
-"set it to your local zone, e.g. Europe/Zurich."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:113
+#: en/live-boot.7:99
#, no-wrap
msgid "B<todisk>=I<DEVICE>"
msgstr "B<todisk>=I<DEVICE>"
#. type: Plain text
-#: en/live-boot.7:115
+#: en/live-boot.7:101
msgid ""
"Adding this parameter, live-boot will try to copy the entire read-only media "
"to the specified device before mounting the root filesystem. It probably "
msgstr ""
#. type: IP
-#: en/live-boot.7:115
+#: en/live-boot.7:101
#, no-wrap
msgid "B<toram>"
msgstr "B<toram>"
#. type: Plain text
-#: en/live-boot.7:117
+#: en/live-boot.7:103
msgid ""
"Adding this parameter, live-boot will try to copy the whole read-only media "
"to the computer's RAM before mounting the root filesystem. This could need a "
msgstr ""
#. type: IP
-#: en/live-boot.7:117
+#: en/live-boot.7:103
#, no-wrap
msgid "B<union>=aufs|unionfs"
msgstr "B<union>=aufs|unionfs"
#. type: Plain text
-#: en/live-boot.7:119
+#: en/live-boot.7:105
msgid ""
"By default, live-boot uses aufs. With this parameter, you can switch to "
"unionfs."
msgstr ""
#. type: IP
-#: en/live-boot.7:119
-#, no-wrap
-msgid "B<utc>=yes|no"
-msgstr "B<utc>=yes|no"
-
-#. type: Plain text
-#: en/live-boot.7:121
-msgid ""
-"By default, Debian systems do assume that the hardware clock is set to UTC. "
-"You can change or explicitly set it with this parameter."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:121
+#: en/live-boot.7:105
#, no-wrap
msgid "B<xdebconf>"
msgstr "B<xdebconf>"
#. type: Plain text
-#: en/live-boot.7:123
+#: en/live-boot.7:107
msgid ""
"Uses xdebconfigurator, if present on the rootfs, to configure X instead of "
"the standard procedure (experimental)."
msgstr ""
#. type: IP
-#: en/live-boot.7:123
+#: en/live-boot.7:107
#, no-wrap
msgid "B<xvideomode>=I<RESOLUTION>"
msgstr "B<xvideomode>=I<RESOLUTION>"
#. FIXME
#. type: Plain text
-#: en/live-boot.7:126
+#: en/live-boot.7:110
msgid "Doesn't do xorg autodetection, but enforces a given resolution."
msgstr ""
#. FIXME
#. type: SH
-#: en/live-boot.7:128
+#: en/live-boot.7:112
#, no-wrap
msgid "FILES (old)"
msgstr ""
#. type: IP
-#: en/live-boot.7:129 en/live-snapshot.1:43
+#: en/live-boot.7:113 en/live-snapshot.1:43
#, no-wrap
msgid "B</etc/live.conf>"
msgstr "B</etc/live.conf>"
#. type: Plain text
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
msgid ""
"Some variables can be configured via this config file (inside the live "
"system)."
msgstr ""
#. type: IP
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
#, no-wrap
msgid "B<live/filesystem.module>"
msgstr "B<live/filesystem.module>"
#. type: Plain text
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
msgid ""
"This optional file (inside the live media) contains a list of white-space or "
"carriage-return-separated file names corresponding to disk images in the \"/"
msgstr ""
#. type: IP
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
#, no-wrap
msgid "B</etc/live-persistence.binds>"
msgstr "B</etc/live-persistence.binds>"
#. type: Plain text
-#: en/live-boot.7:135 en/live-snapshot.1:49
+#: en/live-boot.7:119 en/live-snapshot.1:49
msgid ""
"This optional file (which resides in the rootfs system, not in the live "
"media) is used as a list of directories which not need be persistent: ie. "
msgstr ""
#. type: Plain text
-#: en/live-boot.7:138 en/live-snapshot.1:51
+#: en/live-boot.7:122 en/live-snapshot.1:51
msgid ""
"This saves expensive writes and speeds up operations on volatile data such "
"as web caches and temporary files (like e.g. /tmp and .mozilla) which are "
msgstr ""
#. type: SH
-#: en/live-boot.7:139 en/live-snapshot.1:42
+#: en/live-boot.7:123 en/live-snapshot.1:42
#, no-wrap
msgid "FILES"
msgstr "DATEIEN"
#. type: IP
-#: en/live-boot.7:140
+#: en/live-boot.7:124
#, no-wrap
msgid "B</etc/live/boot.conf>"
msgstr "B</etc/live/boot.conf>"
#. type: IP
-#: en/live-boot.7:141
+#: en/live-boot.7:125
#, no-wrap
msgid "B</etc/live/boot.conf.d/>"
msgstr "B</etc/live/boot.conf.d/>"
#. type: IP
-#: en/live-boot.7:142
+#: en/live-boot.7:126
#, no-wrap
msgid "B<live/boot.conf>"
msgstr "B<live/boot.conf>"
#. type: IP
-#: en/live-boot.7:143
+#: en/live-boot.7:127
#, no-wrap
msgid "B<live/boot.conf.d/>"
msgstr "B<live/boot.conf.d/>"
#. type: SH
-#: en/live-boot.7:145 en/live-snapshot.1:52
+#: en/live-boot.7:129 en/live-snapshot.1:52
#, no-wrap
msgid "SEE ALSO"
msgstr "SIEHE AUCH"
#. type: Plain text
-#: en/live-boot.7:147
+#: en/live-boot.7:131
msgid "I<live-snapshot>(1)"
msgstr "I<live-snapshot>(1)"
#. type: Plain text
-#: en/live-boot.7:149 en/live-snapshot.1:56
+#: en/live-boot.7:133 en/live-snapshot.1:56
msgid "I<live-config>(7)"
msgstr "I<live-config>(7)"
#. type: Plain text
-#: en/live-boot.7:151 en/live-snapshot.1:58
+#: en/live-boot.7:135 en/live-snapshot.1:58
msgid "I<live-helper>(7)"
msgstr "I<live-helper>(7)"
#. type: SH
-#: en/live-boot.7:152 en/live-snapshot.1:59
+#: en/live-boot.7:136 en/live-snapshot.1:59
#, no-wrap
msgid "HOMEPAGE"
msgstr "HOMEPAGE"
#. type: Plain text
-#: en/live-boot.7:154 en/live-snapshot.1:61
+#: en/live-boot.7:138 en/live-snapshot.1:61
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
"unter E<lt>I<http://live.debian.net/manual/>E<gt> gefunden werden."
#. type: SH
-#: en/live-boot.7:155 en/live-snapshot.1:62
+#: en/live-boot.7:139 en/live-snapshot.1:62
#, no-wrap
msgid "BUGS"
msgstr "FEHLER"
#. type: Plain text
-#: en/live-boot.7:157 en/live-snapshot.1:64
+#: en/live-boot.7:141 en/live-snapshot.1:64
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
"werden."
#. type: SH
-#: en/live-boot.7:158 en/live-snapshot.1:65
+#: en/live-boot.7:142 en/live-snapshot.1:65
#, no-wrap
msgid "AUTHOR"
msgstr "AUTOR"
#. type: Plain text
-#: en/live-boot.7:159 en/live-snapshot.1:66
+#: en/live-boot.7:143 en/live-snapshot.1:66
msgid ""
"live-boot was written by Daniel Baumann E<lt>I<daniel@debian.org>E<gt> for "
"the Debian project."
#
msgid ""
msgstr ""
-"Project-Id-Version: live-boot 2.0~a3\n"
-"POT-Creation-Date: 2010-05-30 09:26+0300\n"
+"Project-Id-Version: live-boot 2.0~a4\n"
+"POT-Creation-Date: 2010-06-02 22:46+0300\n"
"PO-Revision-Date: 2010-05-24 12:34+0300\n"
"Last-Translator: Daniel Baumann <daniel@debian.org>\n"
"Language-Team: none\n"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2010-05-30"
-msgstr "30.05.2010"
+msgid "2010-06-02"
+msgstr "02.06.2010"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2.0~a3"
-msgstr "2.0~a3"
+msgid "2.0~a4"
+msgstr "2.0~a4"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
msgstr "OPTIONEN"
#. type: IP
-#: en/live-boot.7:129 en/live-snapshot.1:43
+#: en/live-boot.7:113 en/live-snapshot.1:43
#, no-wrap
msgid "B</etc/live.conf>"
msgstr "B</etc/live.conf>"
#. type: Plain text
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
msgid ""
"Some variables can be configured via this config file (inside the live "
"system)."
msgstr ""
#. type: IP
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
#, no-wrap
msgid "B<live/filesystem.module>"
msgstr "B<live/filesystem.module>"
#. type: Plain text
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
msgid ""
"This optional file (inside the live media) contains a list of white-space or "
"carriage-return-separated file names corresponding to disk images in the \"/"
msgstr ""
#. type: IP
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
#, no-wrap
msgid "B</etc/live-persistence.binds>"
msgstr "B</etc/live-persistence.binds>"
#. type: Plain text
-#: en/live-boot.7:135 en/live-snapshot.1:49
+#: en/live-boot.7:119 en/live-snapshot.1:49
msgid ""
"This optional file (which resides in the rootfs system, not in the live "
"media) is used as a list of directories which not need be persistent: ie. "
msgstr ""
#. type: Plain text
-#: en/live-boot.7:138 en/live-snapshot.1:51
+#: en/live-boot.7:122 en/live-snapshot.1:51
msgid ""
"This saves expensive writes and speeds up operations on volatile data such "
"as web caches and temporary files (like e.g. /tmp and .mozilla) which are "
msgstr ""
#. type: SH
-#: en/live-boot.7:139 en/live-snapshot.1:42
+#: en/live-boot.7:123 en/live-snapshot.1:42
#, no-wrap
msgid "FILES"
msgstr "DATEIEN"
#. type: SH
-#: en/live-boot.7:145 en/live-snapshot.1:52
+#: en/live-boot.7:129 en/live-snapshot.1:52
#, no-wrap
msgid "SEE ALSO"
msgstr "SIEHE AUCH"
#. type: Plain text
-#: en/live-boot.7:149 en/live-snapshot.1:56
+#: en/live-boot.7:133 en/live-snapshot.1:56
msgid "I<live-config>(7)"
msgstr "I<live-config>(7)"
#. type: Plain text
-#: en/live-boot.7:151 en/live-snapshot.1:58
+#: en/live-boot.7:135 en/live-snapshot.1:58
msgid "I<live-helper>(7)"
msgstr "I<live-helper>(7)"
#. type: SH
-#: en/live-boot.7:152 en/live-snapshot.1:59
+#: en/live-boot.7:136 en/live-snapshot.1:59
#, no-wrap
msgid "HOMEPAGE"
msgstr "HOMEPAGE"
#. type: Plain text
-#: en/live-boot.7:154 en/live-snapshot.1:61
+#: en/live-boot.7:138 en/live-snapshot.1:61
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
"unter E<lt>I<http://live.debian.net/manual/>E<gt> gefunden werden."
#. type: SH
-#: en/live-boot.7:155 en/live-snapshot.1:62
+#: en/live-boot.7:139 en/live-snapshot.1:62
#, no-wrap
msgid "BUGS"
msgstr "FEHLER"
#. type: Plain text
-#: en/live-boot.7:157 en/live-snapshot.1:64
+#: en/live-boot.7:141 en/live-snapshot.1:64
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
"werden."
#. type: SH
-#: en/live-boot.7:158 en/live-snapshot.1:65
+#: en/live-boot.7:142 en/live-snapshot.1:65
#, no-wrap
msgid "AUTHOR"
msgstr "AUTOR"
#. type: Plain text
-#: en/live-boot.7:159 en/live-snapshot.1:66
+#: en/live-boot.7:143 en/live-snapshot.1:66
msgid ""
"live-boot was written by Daniel Baumann E<lt>I<daniel@debian.org>E<gt> for "
"the Debian project."
msgid ""
msgstr ""
"Project-Id-Version: live-boot VERSION\n"
-"POT-Creation-Date: 2010-05-30 09:26+0300\n"
+"POT-Creation-Date: 2010-06-02 22:46+0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2010-05-30"
+msgid "2010-06-02"
msgstr ""
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2.0~a3"
+msgid "2.0~a4"
msgstr ""
#. type: TH
#. type: IP
#: en/live-boot.7:43
#, no-wrap
-msgid "B<hostname>=I<HOSTNAME>, B<username>=I<USER>, B<userfullname>=I<USERFULLNAME>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:45
-msgid "Those parameters lets you override values read from the config file."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:45
-#, no-wrap
msgid "B<ignore_uuid>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:47
+#: en/live-boot.7:45
msgid ""
"Do not check that any UUID embedded in the initramfs matches the discovered "
"medium. live-boot may be told to generate a UUID by setting "
msgstr ""
#. type: IP
-#: en/live-boot.7:47
+#: en/live-boot.7:45
#, no-wrap
msgid "B<integrity-check>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:49
+#: en/live-boot.7:47
msgid ""
"If specified, an MD5 sum is calculated on the live media during boot and "
"compared to the value found in md5sum.txt found in the root directory of the "
msgstr ""
#. type: IP
-#: en/live-boot.7:49
+#: en/live-boot.7:47
#, no-wrap
msgid "B<ip>=[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>] [,[I<CLIENT_IP>]:[I<SERVER_IP>]:[I<GATEWAY_IP>]:[I<NETMASK>]:[I<HOSTNAME>]:[I<DEVICE>]:[I<AUTOCONF>]]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:51
+#: en/live-boot.7:49
msgid ""
"Let you specify the name(s) and the options of the interface(s) that should "
"be configured at boot time. Do not specify this if you want to use dhcp "
msgstr ""
#. type: IP
-#: en/live-boot.7:51
+#: en/live-boot.7:49
#, no-wrap
msgid "B<ip>=[I<frommedia>]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:53
+#: en/live-boot.7:51
msgid ""
"If this variable is set, dhcp and static configuration are just skipped and "
"the system will use the (must be) media-preconfigured /etc/network/"
msgstr ""
#. type: IP
-#: en/live-boot.7:53
+#: en/live-boot.7:51
#, no-wrap
msgid "{B<keyb>|B<kbd-chooser/method>}=I<KEYBOARD>, {B<klayout>|B<console-setup/layoutcode>}=I<LAYOUT>, {B<kvariant>|B<console-setup/variantcode>}=I<VARIANT>, {B<kmodel>I<|>B<console-setup/modelcode>}=I<CODE>, B<koptions>=I<OPTIONS>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:55
+#: en/live-boot.7:53
msgid ""
"Configure the running keyboard as specified, if this one misses live-boot "
"behaves as if \"keyb=us\" was specified. It will be interfered from \"locale="
msgstr ""
#. type: IP
-#: en/live-boot.7:55
+#: en/live-boot.7:53
#, no-wrap
msgid "B<live-getty>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:57
+#: en/live-boot.7:55
msgid ""
"This changes the auto-login on virtual terminals to use the (experimental) "
"live-getty code. With this option set the standard kernel argument \"console="
msgstr ""
#. type: IP
-#: en/live-boot.7:57
+#: en/live-boot.7:55
#, no-wrap
msgid "{B<live-media>|B<bootfrom>}=I<DEVICE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:59
+#: en/live-boot.7:57
msgid ""
"If you specify one of this two equivalent forms, live-boot will first try to "
"find this device for the \"/live\" directory where the read-only root "
msgstr ""
#. type: Plain text
-#: en/live-boot.7:61
+#: en/live-boot.7:59
msgid ""
"Instead of specifing an actual device name, the keyword 'removable' can be "
"used to limit the search of acceptable live media to removable type only. "
msgstr ""
#. type: IP
-#: en/live-boot.7:61
+#: en/live-boot.7:59
#, no-wrap
msgid "{B<live-media-encryption>|B<encryption>}=I<TYPE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:63
+#: en/live-boot.7:61
msgid ""
"live-boot will mount the encrypted rootfs TYPE, asking the passphrase, "
"useful to build paranoid live systems :-). TYPE supported so far are \"aes\" "
msgstr ""
#. type: IP
-#: en/live-boot.7:63
+#: en/live-boot.7:61
#, no-wrap
msgid "B<live-media-offset>=I<BYTES>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:65
+#: en/live-boot.7:63
msgid ""
"This way you could tell live-boot that your image starts at offset BYTES in "
"the above specified or autodiscovered device, this could be useful to hide "
msgstr ""
#. type: IP
-#: en/live-boot.7:65
+#: en/live-boot.7:63
#, no-wrap
msgid "B<live-media-path>=I<PATH>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:67
+#: en/live-boot.7:65
msgid ""
"Sets the path to the live filesystem on the medium. By default, it is set to "
"'/live' and you should not change that unless you have customized your media "
msgstr ""
#. type: IP
-#: en/live-boot.7:67
+#: en/live-boot.7:65
#, no-wrap
msgid "B<live-media-timeout>=I<SECONDS>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:69
+#: en/live-boot.7:67
msgid ""
"Set the timeout in seconds for the device specified by \"live-media=\" to "
"become ready before giving up."
msgstr ""
#. type: IP
-#: en/live-boot.7:69
-#, no-wrap
-msgid "{B<locale>|B<debian-installer/locale>}=I<LOCALE>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:71
-msgid ""
-"Configure the running locale as specified, if not present the live-media "
-"rootfs configured locale will be used and if also this one misses live-boot "
-"behave as \"locale=en_US.UTF-8\" was specified. If only 2 lowercase letter "
-"are specified (like \"it\"), the \"maybe wanted\" locale is generated (like "
-"en:EN.UTF-8), in this case if also \"keyb=\" is unspecified is set with "
-"those 2 lowercase letters (keyb=us). Beside that facility, only UTF8 locales "
-"are supported by live-boot."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:71
+#: en/live-boot.7:67
#, no-wrap
msgid "B<module>=I<NAME>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:73
+#: en/live-boot.7:69
msgid ""
"Instead of using the default optional file \"filesystem.module\" (see below) "
"another file could be specified without the extension \".module\"; it should "
msgstr ""
#. type: IP
-#: en/live-boot.7:73
+#: en/live-boot.7:69
#, no-wrap
msgid "B<netboot>[=nfs|cifs]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:75
+#: en/live-boot.7:71
msgid ""
"This tells live-boot to perform a network mount. The parameter \"nfsroot="
"\" (with optional \"nfsopts=\"), should specify where is the location of the "
msgstr ""
#. type: IP
-#: en/live-boot.7:75
+#: en/live-boot.7:71
#, no-wrap
msgid "B<nfsopts>="
msgstr ""
#. type: Plain text
-#: en/live-boot.7:77
+#: en/live-boot.7:73
msgid "This lets you specify custom nfs options."
msgstr ""
#. type: IP
-#: en/live-boot.7:77
-#, no-wrap
-msgid "B<noautologin>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:79
-msgid ""
-"This parameter disables the automatic terminal login only, not touching gdk/"
-"kdm."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:79
-#, no-wrap
-msgid "B<noxautologin>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:81
-msgid ""
-"This parameter disables the automatic login of gdm/kdm only, not touching "
-"terminals."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:81
+#: en/live-boot.7:73
#, no-wrap
msgid "B<nofastboot>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:83
+#: en/live-boot.7:75
msgid ""
"This parameter disables the default disabling of filesystem checks in /etc/"
"fstab. If you have static filesystems on your harddisk and you want them to "
msgstr ""
#. type: IP
-#: en/live-boot.7:83
+#: en/live-boot.7:75
#, no-wrap
msgid "B<nopersistent>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:85
+#: en/live-boot.7:77
msgid ""
"disables the \"persistent\" feature, useful if the bootloader (like "
"syslinux) has been installed with persistent enabled."
msgstr ""
#. type: IP
-#: en/live-boot.7:85
+#: en/live-boot.7:77
#, no-wrap
msgid "B<noprompt>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:87
+#: en/live-boot.7:79
msgid "Do not prompt to eject the CD or remove the USB flash drive on reboot."
msgstr ""
#. type: IP
-#: en/live-boot.7:87
-#, no-wrap
-msgid "B<nosudo>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:89
-msgid "This parameter disables the automatic configuration of sudo."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:89
+#: en/live-boot.7:79
#, no-wrap
msgid "B<swapon>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:91
+#: en/live-boot.7:81
msgid "This parameter enables usage of local swap partitions."
msgstr ""
#. type: IP
-#: en/live-boot.7:91
-#, no-wrap
-msgid "B<nouser>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:93
-msgid "This parameter disables the creation of the default user completely."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:93
+#: en/live-boot.7:81
#, no-wrap
msgid "B<noxautoconfig>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:95
+#: en/live-boot.7:83
msgid ""
"This parameter disables Xorg auto-reconfiguration at boot time. This is "
"valuable if you either do the detection on your own, or, if you want to ship "
msgstr ""
#. type: IP
-#: en/live-boot.7:95
+#: en/live-boot.7:83
#, no-wrap
msgid "B<persistent>[=nofiles]"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:97
+#: en/live-boot.7:85
msgid ""
"live-boot will look for persistent and snapshot partitions or files labeled "
"\"live-rw\", \"home-rw\", and files called \"live-sn*\", \"home-sn*\" and "
msgstr ""
#. type: IP
-#: en/live-boot.7:97
+#: en/live-boot.7:85
#, no-wrap
msgid "B<persistent-path>=I<PATH>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:99
+#: en/live-boot.7:87
msgid ""
"live-boot will look for persistency files in the root directory of a "
"partition, with this parameter, the path can be configured so that you can "
msgstr ""
#. type: IP
-#: en/live-boot.7:99
+#: en/live-boot.7:87
#, no-wrap
msgid "{B<preseed/file>|B<file>}=I<FILE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:101
+#: en/live-boot.7:89
msgid ""
"A path to a file present on the rootfs could be used to preseed debconf "
"database."
msgstr ""
#. type: IP
-#: en/live-boot.7:101
+#: en/live-boot.7:89
#, no-wrap
msgid "B<package/question>=I<VALUE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:103
+#: en/live-boot.7:91
msgid ""
"All debian installed packages could be preseeded from command-line that way, "
"beware of blanks spaces, they will interfere with parsing, use a preseed "
msgstr ""
#. type: IP
-#: en/live-boot.7:103
+#: en/live-boot.7:91
#, no-wrap
msgid "B<quickreboot>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:105
+#: en/live-boot.7:93
msgid ""
"This option causes live-boot to reboot without attempting to eject the media "
"and without asking the user to remove the boot media."
msgstr ""
#. type: IP
-#: en/live-boot.7:105
+#: en/live-boot.7:93
#, no-wrap
msgid "B<showmounts>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:107
+#: en/live-boot.7:95
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
"(mostly compressed) on \"/live\". This is not enabled by default because "
msgstr ""
#. type: IP
-#: en/live-boot.7:107
+#: en/live-boot.7:95
#, no-wrap
msgid "B<silent>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:109
+#: en/live-boot.7:97
msgid ""
"If you boot with the normal quiet parameter, live-boot hides most messages "
"of its own. When adding silent, it hides all."
msgstr ""
#. type: IP
-#: en/live-boot.7:109
+#: en/live-boot.7:97
#, no-wrap
msgid "B<textonly>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:111
+#: en/live-boot.7:99
msgid ""
"Start up to text-mode shell prompts, disabling the graphical user interface."
msgstr ""
#. type: IP
-#: en/live-boot.7:111
-#, no-wrap
-msgid "B<timezone>=I<TIMEZONE>"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:113
-msgid ""
-"By default, timezone is set to UTC. Using the timezone parameter, you can "
-"set it to your local zone, e.g. Europe/Zurich."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:113
+#: en/live-boot.7:99
#, no-wrap
msgid "B<todisk>=I<DEVICE>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:115
+#: en/live-boot.7:101
msgid ""
"Adding this parameter, live-boot will try to copy the entire read-only media "
"to the specified device before mounting the root filesystem. It probably "
msgstr ""
#. type: IP
-#: en/live-boot.7:115
+#: en/live-boot.7:101
#, no-wrap
msgid "B<toram>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:117
+#: en/live-boot.7:103
msgid ""
"Adding this parameter, live-boot will try to copy the whole read-only media "
"to the computer's RAM before mounting the root filesystem. This could need a "
msgstr ""
#. type: IP
-#: en/live-boot.7:117
+#: en/live-boot.7:103
#, no-wrap
msgid "B<union>=aufs|unionfs"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:119
+#: en/live-boot.7:105
msgid ""
"By default, live-boot uses aufs. With this parameter, you can switch to "
"unionfs."
msgstr ""
#. type: IP
-#: en/live-boot.7:119
-#, no-wrap
-msgid "B<utc>=yes|no"
-msgstr ""
-
-#. type: Plain text
-#: en/live-boot.7:121
-msgid ""
-"By default, Debian systems do assume that the hardware clock is set to UTC. "
-"You can change or explicitly set it with this parameter."
-msgstr ""
-
-#. type: IP
-#: en/live-boot.7:121
+#: en/live-boot.7:105
#, no-wrap
msgid "B<xdebconf>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:123
+#: en/live-boot.7:107
msgid ""
"Uses xdebconfigurator, if present on the rootfs, to configure X instead of "
"the standard procedure (experimental)."
msgstr ""
#. type: IP
-#: en/live-boot.7:123
+#: en/live-boot.7:107
#, no-wrap
msgid "B<xvideomode>=I<RESOLUTION>"
msgstr ""
#. FIXME
#. type: Plain text
-#: en/live-boot.7:126
+#: en/live-boot.7:110
msgid "Doesn't do xorg autodetection, but enforces a given resolution."
msgstr ""
#. FIXME
#. type: SH
-#: en/live-boot.7:128
+#: en/live-boot.7:112
#, no-wrap
msgid "FILES (old)"
msgstr ""
#. type: IP
-#: en/live-boot.7:129 en/live-snapshot.1:43
+#: en/live-boot.7:113 en/live-snapshot.1:43
#, no-wrap
msgid "B</etc/live.conf>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
msgid ""
"Some variables can be configured via this config file (inside the live "
"system)."
msgstr ""
#. type: IP
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
#, no-wrap
msgid "B<live/filesystem.module>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
msgid ""
"This optional file (inside the live media) contains a list of white-space or "
"carriage-return-separated file names corresponding to disk images in the \"/"
msgstr ""
#. type: IP
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
#, no-wrap
msgid "B</etc/live-persistence.binds>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:135 en/live-snapshot.1:49
+#: en/live-boot.7:119 en/live-snapshot.1:49
msgid ""
"This optional file (which resides in the rootfs system, not in the live "
"media) is used as a list of directories which not need be persistent: ie. "
msgstr ""
#. type: Plain text
-#: en/live-boot.7:138 en/live-snapshot.1:51
+#: en/live-boot.7:122 en/live-snapshot.1:51
msgid ""
"This saves expensive writes and speeds up operations on volatile data such "
"as web caches and temporary files (like e.g. /tmp and .mozilla) which are "
msgstr ""
#. type: SH
-#: en/live-boot.7:139 en/live-snapshot.1:42
+#: en/live-boot.7:123 en/live-snapshot.1:42
#, no-wrap
msgid "FILES"
msgstr ""
#. type: IP
-#: en/live-boot.7:140
+#: en/live-boot.7:124
#, no-wrap
msgid "B</etc/live/boot.conf>"
msgstr ""
#. type: IP
-#: en/live-boot.7:141
+#: en/live-boot.7:125
#, no-wrap
msgid "B</etc/live/boot.conf.d/>"
msgstr ""
#. type: IP
-#: en/live-boot.7:142
+#: en/live-boot.7:126
#, no-wrap
msgid "B<live/boot.conf>"
msgstr ""
#. type: IP
-#: en/live-boot.7:143
+#: en/live-boot.7:127
#, no-wrap
msgid "B<live/boot.conf.d/>"
msgstr ""
#. type: SH
-#: en/live-boot.7:145 en/live-snapshot.1:52
+#: en/live-boot.7:129 en/live-snapshot.1:52
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:147
+#: en/live-boot.7:131
msgid "I<live-snapshot>(1)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:149 en/live-snapshot.1:56
+#: en/live-boot.7:133 en/live-snapshot.1:56
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:151 en/live-snapshot.1:58
+#: en/live-boot.7:135 en/live-snapshot.1:58
msgid "I<live-helper>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:152 en/live-snapshot.1:59
+#: en/live-boot.7:136 en/live-snapshot.1:59
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:154 en/live-snapshot.1:61
+#: en/live-boot.7:138 en/live-snapshot.1:61
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
msgstr ""
#. type: SH
-#: en/live-boot.7:155 en/live-snapshot.1:62
+#: en/live-boot.7:139 en/live-snapshot.1:62
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:157 en/live-snapshot.1:64
+#: en/live-boot.7:141 en/live-snapshot.1:64
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
msgstr ""
#. type: SH
-#: en/live-boot.7:158 en/live-snapshot.1:65
+#: en/live-boot.7:142 en/live-snapshot.1:65
#, no-wrap
msgid "AUTHOR"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:159 en/live-snapshot.1:66
+#: en/live-boot.7:143 en/live-snapshot.1:66
msgid ""
"live-boot was written by Daniel Baumann E<lt>I<daniel@debian.org>E<gt> for "
"the Debian project."
msgid ""
msgstr ""
"Project-Id-Version: live-boot VERSION\n"
-"POT-Creation-Date: 2010-05-30 09:26+0300\n"
+"POT-Creation-Date: 2010-06-02 22:46+0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2010-05-30"
+msgid "2010-06-02"
msgstr ""
#. type: TH
#: en/live-boot.7:1 en/live-snapshot.1:1
#, no-wrap
-msgid "2.0~a3"
+msgid "2.0~a4"
msgstr ""
#. type: TH
msgstr ""
#. type: IP
-#: en/live-boot.7:129 en/live-snapshot.1:43
+#: en/live-boot.7:113 en/live-snapshot.1:43
#, no-wrap
msgid "B</etc/live.conf>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
msgid ""
"Some variables can be configured via this config file (inside the live "
"system)."
msgstr ""
#. type: IP
-#: en/live-boot.7:131 en/live-snapshot.1:45
+#: en/live-boot.7:115 en/live-snapshot.1:45
#, no-wrap
msgid "B<live/filesystem.module>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
msgid ""
"This optional file (inside the live media) contains a list of white-space or "
"carriage-return-separated file names corresponding to disk images in the \"/"
msgstr ""
#. type: IP
-#: en/live-boot.7:133 en/live-snapshot.1:47
+#: en/live-boot.7:117 en/live-snapshot.1:47
#, no-wrap
msgid "B</etc/live-persistence.binds>"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:135 en/live-snapshot.1:49
+#: en/live-boot.7:119 en/live-snapshot.1:49
msgid ""
"This optional file (which resides in the rootfs system, not in the live "
"media) is used as a list of directories which not need be persistent: ie. "
msgstr ""
#. type: Plain text
-#: en/live-boot.7:138 en/live-snapshot.1:51
+#: en/live-boot.7:122 en/live-snapshot.1:51
msgid ""
"This saves expensive writes and speeds up operations on volatile data such "
"as web caches and temporary files (like e.g. /tmp and .mozilla) which are "
msgstr ""
#. type: SH
-#: en/live-boot.7:139 en/live-snapshot.1:42
+#: en/live-boot.7:123 en/live-snapshot.1:42
#, no-wrap
msgid "FILES"
msgstr ""
#. type: SH
-#: en/live-boot.7:145 en/live-snapshot.1:52
+#: en/live-boot.7:129 en/live-snapshot.1:52
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:149 en/live-snapshot.1:56
+#: en/live-boot.7:133 en/live-snapshot.1:56
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:151 en/live-snapshot.1:58
+#: en/live-boot.7:135 en/live-snapshot.1:58
msgid "I<live-helper>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:152 en/live-snapshot.1:59
+#: en/live-boot.7:136 en/live-snapshot.1:59
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:154 en/live-snapshot.1:61
+#: en/live-boot.7:138 en/live-snapshot.1:61
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
msgstr ""
#. type: SH
-#: en/live-boot.7:155 en/live-snapshot.1:62
+#: en/live-boot.7:139 en/live-snapshot.1:62
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:157 en/live-snapshot.1:64
+#: en/live-boot.7:141 en/live-snapshot.1:64
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
msgstr ""
#. type: SH
-#: en/live-boot.7:158 en/live-snapshot.1:65
+#: en/live-boot.7:142 en/live-snapshot.1:65
#, no-wrap
msgid "AUTHOR"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:159 en/live-snapshot.1:66
+#: en/live-boot.7:143 en/live-snapshot.1:66
msgid ""
"live-boot was written by Daniel Baumann E<lt>I<daniel@debian.org>E<gt> for "
"the Debian project."