isgrmlsmall() { return 1 }
fi
+GRML_OSTYPE=$(uname -s)
+
+islinux(){
+ [[ $GRML_OSTYPE == "Linux" ]]
+}
+
isdarwin(){
- [[ $OSTYPE == darwin* ]] && return 0
- return 1
+ [[ $GRML_OSTYPE == "Darwin" ]]
}
isfreebsd(){
- [[ $OSTYPE == freebsd* ]] && return 0
- return 1
+ [[ $GRML_OSTYPE == "FreeBSD" ]]
+}
+
+isopenbsd(){
+ [[ $GRML_OSTYPE == "OpenBSD" ]]
+}
+
+issolaris(){
+ [[ $GRML_OSTYPE == "SunOS" ]]
}
#f1# are we running within an utf environment?
return 0
}
+# The following is the ‘add-zsh-hook’ function from zsh upstream. It is
+# included here to make the setup work with older versions of zsh (prior to
+# 4.3.7) in which this function had a bug that triggers annoying errors during
+# shell startup. This is exactly upstreams code from f0068edb4888a4d8fe94def,
+# with just a few adjustments in coding style to make the function look more
+# compact. This definition can be removed as soon as we raise the minimum
+# version requirement to 4.3.7 or newer.
+function add-zsh-hook() {
+ # Add to HOOK the given FUNCTION.
+ # HOOK is one of chpwd, precmd, preexec, periodic, zshaddhistory,
+ # zshexit, zsh_directory_name (the _functions subscript is not required).
+ #
+ # With -d, remove the function from the hook instead; delete the hook
+ # variable if it is empty.
+ #
+ # -D behaves like -d, but pattern characters are active in the function
+ # name, so any matching function will be deleted from the hook.
+ #
+ # Without -d, the FUNCTION is marked for autoload; -U is passed down to
+ # autoload if that is given, as are -z and -k. (This is harmless if the
+ # function is actually defined inline.)
+ emulate -L zsh
+ local -a hooktypes
+ hooktypes=(
+ chpwd precmd preexec periodic zshaddhistory zshexit
+ zsh_directory_name
+ )
+ local usage="Usage: $0 hook function\nValid hooks are:\n $hooktypes"
+ local opt
+ local -a autoopts
+ integer del list help
+ while getopts "dDhLUzk" opt; do
+ case $opt in
+ (d) del=1 ;;
+ (D) del=2 ;;
+ (h) help=1 ;;
+ (L) list=1 ;;
+ ([Uzk]) autoopts+=(-$opt) ;;
+ (*) return 1 ;;
+ esac
+ done
+ shift $(( OPTIND - 1 ))
+ if (( list )); then
+ typeset -mp "(${1:-${(@j:|:)hooktypes}})_functions"
+ return $?
+ elif (( help || $# != 2 || ${hooktypes[(I)$1]} == 0 )); then
+ print -u$(( 2 - help )) $usage
+ return $(( 1 - help ))
+ fi
+ local hook="${1}_functions"
+ local fn="$2"
+ if (( del )); then
+ # delete, if hook is set
+ if (( ${(P)+hook} )); then
+ if (( del == 2 )); then
+ set -A $hook ${(P)hook:#${~fn}}
+ else
+ set -A $hook ${(P)hook:#$fn}
+ fi
+ # unset if no remaining entries --- this can give better
+ # performance in some cases
+ if (( ! ${(P)#hook} )); then
+ unset $hook
+ fi
+ fi
+ else
+ if (( ${(P)+hook} )); then
+ if (( ${${(P)hook}[(I)$fn]} == 0 )); then
+ set -A $hook ${(P)hook} $fn
+ fi
+ else
+ set -A $hook $fn
+ fi
+ autoload $autoopts -- $fn
+ fi
+}
+
# Load is-at-least() for more precise version checks Note that this test will
# *always* fail, if the is-at-least function could not be marked for
# autoloading.
# display PID when suspending processes as well
setopt longlistjobs
-# try to avoid the 'zsh: no matches found...'
-setopt nonomatch
-
# report the status of backgrounds jobs immediately
setopt notify
NOPRECMD=${NOPRECMD:-0}
COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
-BATTERY=${BATTERY:-0}
+GRML_DISPLAY_BATTERY=${GRML_DISPLAY_BATTERY:-${BATTERY:-0}}
GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
typeset -ga ls_options
typeset -ga grep_options
-if ls --help 2> /dev/null | grep -q GNU; then
- ls_options=( --color=auto )
-elif [[ $OSTYPE == freebsd* ]]; then
- ls_options=( -G )
+
+# Colors on GNU ls(1)
+if ls --color=auto / >/dev/null 2>&1; then
+ ls_options+=( --color=auto )
+# Colors on FreeBSD and OSX ls(1)
+elif ls -G / >/dev/null 2>&1; then
+ ls_options+=( -G )
fi
-if grep --help 2> /dev/null | grep -q GNU || \
- [[ $OSTYPE == freebsd* ]]; then
- grep_options=( --color=auto )
+
+# Natural sorting order on GNU ls(1)
+if ls -v / >/dev/null 2>&1; then
+ ls_options+=( -v )
+fi
+
+# Color on GNU and FreeBSD grep(1)
+if grep --color=auto -q "a" <<< "a" >/dev/null 2>&1; then
+ grep_options+=( --color=auto )
fi
# utility functions
salias() {
emulate -L zsh
local only=0 ; local multi=0
- while [[ $1 == -* ]] ; do
- case $1 in
- (-o) only=1 ;;
- (-a) multi=1 ;;
- (--) shift ; break ;;
- (-h)
- printf 'usage: salias [-h
|-o|-a] <alias-expression>\n'
+ local key val
+ while getopts ":hao" opt; do
+ case $opt in
+ o) only=1 ;;
+ a) multi=1 ;;
+ h)
+ printf 'usage: salias [-h
oa] <alias-expression>\n'
printf ' -h shows this help text.\n'
printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
printf ' be careful using this option.\n'
printf ' -o only sets an alias if a preceding sudo would be needed.\n'
return 0
;;
- (*) printf "unkown option: '%s'\n" "$1" ; return 1 ;;
+ *) salias -h >&2; return 1 ;;
esac
- shift
done
+ shift "$((OPTIND-1))"
if (( ${#argv} > 1 )) ; then
printf 'Too many arguments %s\n' "${#argv}"
return 0
}
-# a "print -l ${(u)foo}"-workaround for pre-4.2.0 shells
-# usage: uprint foo
-# Where foo is the *name* of the parameter you want printed.
-# Note that foo is no typo; $foo would be wrong here!
-if ! is42 ; then
- uprint () {
- emulate -L zsh
- local -a u
- local w
- local parameter=$1
-
- if [[ -z ${parameter} ]] ; then
- printf 'usage: uprint <parameter>\n'
- return 1
- fi
-
- for w in ${(P)parameter} ; do
- [[ -z ${(M)u:#$w} ]] && u=( $u $w )
- done
-
- builtin print -l $u
- }
-fi
-
# Check if we can read given files and source those we can.
xsource() {
if (( ${#argv} < 1 )) ; then
xunfunction() {
emulate -L zsh
local -a funcs
- funcs=(salias xcat xsource xunfunction zrcautoload
- zrcautozle
- zrcbindkey
- zrcgotkeymap
- zrcgotwidget)
+ local func
+ funcs=(salias xcat xsource xunfunction zrcautoload zrcautozle)
for func in $funcs ; do
[[ -n ${functions[$func]} ]] \
&& unfunction $func
for var in LANG LC_ALL LC_MESSAGES ; do
[[ -n ${(P)var} ]] && export $var
done
-
-xsource "/etc/sysconfig/keyboard"
-
-TZ=$(xcat /etc/timezone)
+builtin unset -v var
# set some variables
if check_com -c vim ; then
#v#
export MAIL=${MAIL:-/var/mail/$USER}
-# if we don't set $SHELL then aterm, rxvt,.. will use /bin/sh or /bin/bash :-/
-export SHELL='/bin/zsh'
-
# color setup for ls:
check_com -c dircolors && eval $(dircolors -b)
# color setup for ls on OS X / FreeBSD:
is4 && \
for mod in parameter complist deltochar mathfunc ; do
zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
-done
+done && builtin unset -v mod
# autoload zsh modules when they are referenced
if is4 ; then
fi
# completion system
+COMPDUMPFILE=${COMPDUMPFILE:-${ZDOTDIR:-${HOME}}/.zcompdump}
if zrcautoload compinit ; then
- compinit || print 'Notice: no compinit available :('
+ compinit -d ${COMPDUMPFILE} || print 'Notice: no compinit available :('
else
print 'Notice: no compinit available :('
function compdef { }
# command for process lists, the local web server details and host completion
zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
- # caching
- [[ -d $ZSHDIR/cache ]] && zstyle ':completion:*' use-cache yes && \
- zstyle ':completion::complete:*' cache-path $ZSHDIR/cache/
+ # Some functions, like _apt and _dpkg, are very slow. We can use a cache in
+ # order to speed things up
+ if [[ ${GRML_COMP_CACHING:-yes} == yes ]]; then
+ GRML_COMP_CACHE_DIR=${GRML_COMP_CACHE_DIR:-${ZDOTDIR:-$HOME}/.cache}
+ if [[ ! -d ${GRML_COMP_CACHE_DIR} ]]; then
+ command mkdir -p "${GRML_COMP_CACHE_DIR}"
+ fi
+ zstyle ':completion:*' use-cache yes
+ zstyle ':completion:*:complete:*' cache-path "${GRML_COMP_CACHE_DIR}"
+ fi
# host completion
if is42 ; then
+ [[ -r ~/.ssh/config ]] && _ssh_config_hosts=(${${(s: :)${(ps:\t:)${${(@M)${(f)"$(<$HOME/.ssh/config)"}:#Host *}#Host }}}:#*[*?]*}) || _ssh_config_hosts=()
[[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
[[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
else
+ _ssh_config_hosts=()
_ssh_hosts=()
_etc_hosts=()
fi
hosts=(
$(hostname)
+ "$_ssh_config_hosts[@]"
"$_ssh_hosts[@]"
"$_etc_hosts[@]"
localhost
# use generic completion system for programs not yet defined; (_gnu_generic works
# with commands that provide a --help option with "standard" gnu-like output.)
- for compcom in cp deborphan df feh fetchipac head hnb ipacsum mv \
- pal stow tail uname ; do
+ for compcom in cp deborphan df feh fetchipac gpasswd head hnb ipacsum mv \
+ pal stow uname ; do
[[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
done; unset compcom
compdef _hosts upgrade
}
-# Keyboard setup: The following is the same code, we wrote for debian's setup.
-# It ensures the terminal is in the right mode, when zle is active, so the
-# values from $terminfo are valid. Therefore, this setup should work on all
-# systems, that have support for `terminfo'. It also requires the zsh in use to
-# have the `zsh/terminfo' module built.
+# Keyboard setup: The following is based on the same code, we wrote for
+# debian's setup. It ensures the terminal is in the right mode, when zle is
+# active, so the values from $terminfo are valid. Therefore, this setup should
+# work on all systems, that have support for `terminfo'. It also requires the
+# zsh in use to have the `zsh/terminfo' module built.
#
# If you are customising your `zle-line-init()' or `zle-line-finish()'
# functions, make sure you call the following utility functions in there:
zle -N beginning-of-somewhere beginning-or-end-of-somewhere
zle -N end-of-somewhere beginning-or-end-of-somewhere
-## toggle the ,. abbreviation feature on/off
-# NOABBREVIATION: default abbreviation-state
-# 0 - enabled (default)
-# 1 - disabled
-NOABBREVIATION=${NOABBREVIATION:-0}
-
-grml_toggle_abbrev() {
- if (( ${NOABBREVIATION} > 0 )) ; then
- NOABBREVIATION=0
- else
- NOABBREVIATION=1
- fi
-}
-zle -N grml_toggle_abbrev
-
# add a command line to the shells history without executing it
commit-to-history() {
print -s ${(z)BUFFER}
function accept-line() {
setopt localoptions noksharrays
- local -ax cmdline
+ local -a cmdline
local -x alcontext
local buf com fname format msg default_action
zle -N Accept-Line
zle -N Accept-Line-HandleContext
-# power completion - abbreviation expansion
# power completion / abbreviation expansion / buffer expansion
# see http://zshwiki.org/home/examples/zleiab for details
# less risky than the global aliases but powerful as well
-# just type the abbreviation key and afterwards ',.' to expand it
+# just type the abbreviation key and afterwards 'ctrl-x .' to expand it
declare -A abk
setopt extendedglob
setopt interactivecomments
setopt extendedglob
local MATCH
- if (( NOABBREVIATION > 0 )) ; then
- LBUFFER="${LBUFFER},."
- return 0
- fi
-
LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#}
LBUFFER+=${abk[$MATCH]:-$MATCH}
}
help-show-abk()
{
- zle -M "$(print "Type ,. after these abbreviations to expand them:"; print -a -C 2 ${(kv)abk})"
+ zle -M "$(print "Available abbreviations for expansion:"; print -a -C 2 ${(kv)abk})"
}
zle -N help-show-abk
fi
}
-#k# mkdir -p <dir> from string under cursor or marked area
zle -N inplaceMkDirs
#v1# set number of lines to display per page
if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
local load_cache=0
+ local f
for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
[[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
fi
typeset -g -a help_zle_lines
typeset -g help_zle_sln=1
- local k v
+ local k v f cline
local lastkeybind_desc contents #last description starting with #k# that we found
local num_lines_elapsed=0 #number of lines between last description and keybinding
#search config files in the order they a called (and thus the order in which they overwrite keybindings)
if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
lastkeybind_desc="$match[*]"
num_lines_elapsed=0
- #zsh pattern: matches lines that set a keybinding using bindkey or compdef -k
+ #zsh pattern: matches lines that set a keybinding using bind2map, bindkey or compdef -k
# ignores lines that are commentend out
# grabs first in '' or "" enclosed string with length between 1 and 6 characters
- elif [[ "$cline" == [^#]#(bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
+ elif [[ "$cline" == [^#]#(bind2maps[[:space:]](*)-s|bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
#description prevously found ? description not more than 2 lines away ? keybinding not empty ?
if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
#substitute keybinding string with something readable
done
shift
- sequence="${key[$1]}"
+ if [[ "$1" == "-s" ]]; then
+ shift
+ sequence="$1"
+ else
+ sequence="${key[$1]}"
+ fi
widget="$2"
[[ -z "$sequence" ]] && return 1
if (( ${+terminfo[smkx]} )) && (( ${+terminfo[rmkx]} )); then
function zle-smkx () {
+ emulate -L zsh
printf '%s' ${terminfo[smkx]}
}
function zle-rmkx () {
+ emulate -L zsh
printf '%s' ${terminfo[rmkx]}
}
function zle-line-init () {
BackTab "${terminfo[kcbt]}"
)
+# Guidelines for adding key bindings:
+#
+# - Do not add hardcoded escape sequences, to enable non standard key
+# combinations such as Ctrl-Meta-Left-Cursor. They are not easily portable.
+#
+# - Adding Ctrl characters, such as '^b' is okay; note that '^b' and '^B' are
+# the same key.
+#
+# - All keys from the $key[] mapping are obviously okay.
+#
+# - Most terminals send "ESC x" when Meta-x is pressed. Thus, sequences like
+# '\ex' are allowed in here as well.
+
bind2maps emacs -- Home beginning-of-somewhere
bind2maps viins vicmd -- Home vi-beginning-of-line
bind2maps emacs -- End end-of-somewhere
bind2maps viins vicmd -- Left vi-backward-char
bind2maps emacs -- Right forward-char
bind2maps viins vicmd -- Right vi-forward-char
-bind2maps viins vicmd -- Right vi-forward-char
-
-if zrcgotkeymap menuselect; then
- #m# k Shift-tab Perform backwards menu completion
- bind2maps menuselect -- BackTab reverse-menu-complete
-
- #k# menu selection: pick item but stay in the menu
- zrcbindkey -M menuselect '\e^M' accept-and-menu-complete
- # also use + and INSERT since it's easier to press repeatedly
- zrcbindkey -M menuselect "+" accept-and-menu-complete
- zrcbindkey -M menuselect "^[[2~" accept-and-menu-complete
-
- # accept a completion and try to complete again by using menu
- # completion; very useful with completing directories
- # by using 'undo' one's got a simple file browser
- zrcbindkey -M menuselect '^o' accept-and-infer-next-history
-fi
-
-#k# Display list of abbreviations that expand when followed by ,.
-zrcbindkey ",." zleiab
-zrcbindkey '^xb' help-show-abk
-zrcbindkey '^xM' inplaceMkDirs
+#k# Perform abbreviation expansion
+bind2maps emacs viins -- -s '^x.' zleiab
+#k# Display list of abbreviations that would expand
+bind2maps emacs viins -- -s '^xb' help-show-abk
+#k# mkdir -p <dir> from string under cursor or marked area
+bind2maps emacs viins -- -s '^xM' inplaceMkDirs
#k# display help for keybindings and ZLE
-zrcbindkey '^xz' help-zle
-
+bind2maps emacs viins -- -s '^xz' help-zle
#k# Insert files and test globbing
-zrcbindkey "^xf" insert-files # C-x-f
-
+bind2maps emacs viins -- -s "^xf" insert-files
#k# Edit the current line in \kbd{\$EDITOR}
-zrcbindkey '\ee' edit-command-line
-
-## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on the CL
-zrcbindkey "\e[5C" forward-word
-zrcbindkey "\e[5D" backward-word
-zrcbindkey "\e[1;5C" forward-word
-zrcbindkey "\e[1;5D" backward-word
-## the same for alt-left-arrow and alt-right-arrow
-zrcbindkey '^[[1;3C' forward-word
-zrcbindkey '^[[1;3D' backward-word
-
+bind2maps emacs viins -- -s '\ee' edit-command-line
#k# search history backward for entry beginning with typed text
-zrcbindkey '^xp' history-beginning-search-backward-end
+bind2maps emacs viins -- -s '^xp' history-beginning-search-backward-end
#k# search history forward for entry beginning with typed text
-zrcbindkey '^xP' history-beginning-search-forward-end
+bind2maps emacs viins -- -s '^xP' history-beginning-search-forward-end
#k# search history backward for entry beginning with typed text
-zrcbindkey "\e[5~" history-beginning-search-backward-end # PageUp
+bind2maps emacs viins -- PageUp history-beginning-search-backward-end
#k# search history forward for entry beginning with typed text
-zrcbindkey "\e[6~" history-beginning-search-forward-end # PageDown
-
-# insert unicode character
-# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
-# See for example http://unicode.org/charts/ for unicode characters code
-#k# Insert Unicode character
-zrcbindkey '^xi' insert-unicode-char
-
-#k# Toggle abbreviation expansion on/off
-zrcbindkey '^xA' grml_toggle_abbrev
-zrcbindkey "^x^h" commit-to-history
-
+bind2maps emacs viins -- PageDown history-beginning-search-forward-end
+bind2maps emacs viins -- -s "^x^h" commit-to-history
#k# Kill left-side word or everything up to next slash
-zrcbindkey '\ev' slash-backward-kill-word
+bind2maps emacs viins -- -s '\ev' slash-backward-kill-word
#k# Kill left-side word or everything up to next slash
-zrcbindkey '\e^h' slash-backward-kill-word
+bind2maps emacs viins -- -s '\e^h' slash-backward-kill-word
#k# Kill left-side word or everything up to next slash
-zrcbindkey '\e^?' slash-backward-kill-word
-
-# use the new *-pattern-* widgets for incremental history search
-if zrcgotwidget history-incremental-pattern-search-backward; then
- zrcbindkey '^r' history-incremental-pattern-search-backward
- zrcbindkey '^s' history-incremental-pattern-search-forward
-fi
-
+bind2maps emacs viins -- -s '\e^?' slash-backward-kill-word
# Do history expansion on space:
-zrcbindkey ' ' magic-space
+bind2maps emacs viins -- -s ' ' magic-space
#k# Trigger menu-complete
-zrcbindkey '\ei' menu-complete # menu completion via esc-i
+bind2maps emacs viins -- -s '\ei' menu-complete # menu completion via esc-i
#k# Insert a timestamp on the command line (yyyy-mm-dd)
-zrcbindkey '^ed' insert-datestamp
+bind2maps emacs viins -- -s '^ed' insert-datestamp
#k# Insert last typed word
-zrcbindkey "\em" insert-last-typed-word
+bind2maps emacs viins -- -s "\em" insert-last-typed-word
#k# A smart shortcut for \kbd{fg<enter>}
-zrcbindkey '^z' grml-zsh-fg
+bind2maps emacs viins -- -s '^z' grml-zsh-fg
#k# prepend the current command with "sudo"
-zrcbindkey "^os" sudo-command-line
+bind2maps emacs viins -- -s "^os" sudo-command-line
#k# jump to after first word (for adding options)
-zrcbindkey '^x1' jump_after_first_word
+bind2maps emacs viins -- -s '^x1' jump_after_first_word
#k# complete word from history with menu
-zrcbindkey "^x^x" hist-complete
+bind2maps emacs viins -- -s "^x^x" hist-complete
+
+# insert unicode character
+# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
+# See for example http://unicode.org/charts/ for unicode characters code
+#k# Insert Unicode character
+bind2maps emacs viins -- -s '^xi' insert-unicode-char
+
+# use the new *-pattern-* widgets for incremental history search
+if zrcgotwidget history-incremental-pattern-search-backward; then
+ for seq wid in '^r' history-incremental-pattern-search-backward \
+ '^s' history-incremental-pattern-search-forward
+ do
+ bind2maps emacs viins vicmd -- -s $seq $wid
+ done
+ builtin unset -v seq wid
+fi
+
+if zrcgotkeymap menuselect; then
+ #m# k Shift-tab Perform backwards menu completion
+ bind2maps menuselect -- BackTab reverse-menu-complete
+
+ #k# menu selection: pick item but stay in the menu
+ bind2maps menuselect -- -s '\e^M' accept-and-menu-complete
+ # also use + and INSERT since it's easier to press repeatedly
+ bind2maps menuselect -- -s '+' accept-and-menu-complete
+ bind2maps menuselect -- Insert accept-and-menu-complete
+
+ # accept a completion and try to complete again by using menu
+ # completion; very useful with completing directories
+ # by using 'undo' one's got a simple file browser
+ bind2maps menuselect -- -s '^o' accept-and-infer-next-history
+fi
+
+# Finally, here are still a few hardcoded escape sequences; Special sequences
+# like Ctrl-<Cursor-key> etc do suck a fair bit, because they are not
+# standardised and most of the time are not available in a terminals terminfo
+# entry.
+#
+# While we do not encourage adding bindings like these, we will keep these for
+# backward compatibility.
+
+## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on
+## the command line.
+# URxvt sequences:
+bind2maps emacs viins vicmd -- -s '\eOc' forward-word
+bind2maps emacs viins vicmd -- -s '\eOd' backward-word
+# These are for xterm:
+bind2maps emacs viins vicmd -- -s '\e[1;5C' forward-word
+bind2maps emacs viins vicmd -- -s '\e[1;5D' backward-word
+## the same for alt-left-arrow and alt-right-arrow
+# URxvt again:
+bind2maps emacs viins vicmd -- -s '\e\e[C' forward-word
+bind2maps emacs viins vicmd -- -s '\e\e[D' backward-word
+# Xterm again:
+bind2maps emacs viins vicmd -- -s '^[[1;3C' forward-word
+bind2maps emacs viins vicmd -- -s '^[[1;3D' backward-word
+# Also try ESC Left/Right:
+bind2maps emacs viins vicmd -- -s '\e'${key[Right]} forward-word
+bind2maps emacs viins vicmd -- -s '\e'${key[Left]} backward-word
# autoloading
# history
-ZSHDIR=${ZDOTDIR:-${HOME}/.zsh}
-
#v#
HISTFILE=${ZDOTDIR:-${HOME}}/.zsh_history
isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
DIRSTACKSIZE=${DIRSTACKSIZE:-20}
DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs}
-if [[ -f ${DIRSTACKFILE} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
- dirstack=( ${(f)"$(< $DIRSTACKFILE)"} )
- # "cd -" won't work after login by just setting $OLDPWD, so
- [[ -d $dirstack[1] ]] && cd $dirstack[1] && cd $OLDPWD
-fi
+typeset -gaU GRML_PERSISTENT_DIRSTACK
+function grml_dirstack_filter() {
+ local -a exclude
+ local filter entry
+ if zstyle -s ':grml:chpwd:dirstack' filter filter; then
+ $filter $1 && return 0
+ fi
+ if zstyle -a ':grml:chpwd:dirstack' exclude exclude; then
+ for entry in "${exclude[@]}"; do
+ [[ $1 == ${~entry} ]] && return 0
+ done
+ fi
+ return 1
+}
chpwd() {
- local -ax my_stack
- my_stack=( ${PWD} ${dirstack} )
- if is42 ; then
- builtin print -l ${(u)my_stack} >! ${DIRSTACKFILE}
- else
- uprint my_stack >! ${DIRSTACKFILE}
- fi
+ (( $DIRSTACKSIZE <= 0 )) && return
+ [[ -z $DIRSTACKFILE ]] && return
+ grml_dirstack_filter $PWD && return
+ GRML_PERSISTENT_DIRSTACK=(
+ $PWD "${(@)GRML_PERSISTENT_DIRSTACK[1,$DIRSTACKSIZE]}"
+ )
+ builtin print -l ${GRML_PERSISTENT_DIRSTACK} >! ${DIRSTACKFILE}
}
+if [[ -f ${DIRSTACKFILE} ]]; then
+ # Enabling NULL_GLOB via (N) weeds out any non-existing
+ # directories from the saved dir-stack file.
+ dirstack=( ${(f)"$(< $DIRSTACKFILE)"}(N) )
+ # "cd -" won't work after login by just setting $OLDPWD, so
+ [[ -d $dirstack[1] ]] && cd -q $dirstack[1] && cd -q $OLDPWD
+fi
+
+if zstyle -T ':grml:chpwd:dirstack' filter-on-load; then
+ for i in "${dirstack[@]}"; do
+ if ! grml_dirstack_filter "$i"; then
+ GRML_PERSISTENT_DIRSTACK=(
+ "${GRML_PERSISTENT_DIRSTACK[@]}"
+ $i
+ )
+ fi
+ done
+else
+ GRML_PERSISTENT_DIRSTACK=( "${dirstack[@]}" )
+fi
+
# directory based profiles
if is433 ; then
# set colors for use in prompts (modern zshs allow for the use of %F{red}foo%f
# in prompts to get a red "foo" embedded, but it's good to keep these for
# backwards compatibility).
-if zrcautoload colors && colors 2>/dev/null ; then
+if is437; then
+ BLUE="%F{blue}"
+ RED="%F{red}"
+ GREEN="%F{green}"
+ CYAN="%F{cyan}"
+ MAGENTA="%F{magenta}"
+ YELLOW="%F{yellow}"
+ WHITE="%F{white}"
+ NO_COLOR="%f"
+elif zrcautoload colors && colors 2>/dev/null ; then
BLUE="%{${fg[blue]}%}"
RED="%{${fg_bold[red]}%}"
GREEN="%{${fg[green]}%}"
# - debian_chroot
# - vcs_info setup and version specific fixes
-# display battery status on right side of prompt via running 'BATTERY=1 zsh'
-if [[ $BATTERY -gt 0 ]] ; then
- if ! check_com -c acpi ; then
- BATTERY=0
- fi
-fi
+# display battery status on right side of prompt using 'GRML_DISPLAY_BATTERY=1' in .zshrc.pre
battery() {
-if [[ $BATTERY -gt 0 ]] ; then
- PERCENT="${${"$(acpi 2>/dev/null)"}/(#b)[[:space:]]#Battery <->: [^0-9]##, (<->)%*/${match[1]}}"
- if [[ -z "$PERCENT" ]] ; then
- PERCENT='acpi not present'
+if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then
+ if islinux ; then
+ batterylinux
+ elif isopenbsd ; then
+ batteryopenbsd
+ elif isfreebsd ; then
+ batteryfreebsd
+ elif isdarwin ; then
+ batterydarwin
else
- if [[ "$PERCENT" -lt 20 ]] ; then
- PERCENT="warning: ${PERCENT}%%"
- else
- PERCENT="${PERCENT}%%"
- fi
+ #not yet supported
+ GRML_DISPLAY_BATTERY=0
+ fi
+fi
+}
+
+batterylinux(){
+GRML_BATTERY_LEVEL=''
+local batteries bat capacity
+batteries=( /sys/class/power_supply/BAT*(N) )
+if (( $#batteries > 0 )) ; then
+ for bat in $batteries ; do
+ capacity=$(< $bat/capacity)
+ case $(< $bat/status) in
+ Charging)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ Discharging)
+ if (( capacity < 20 )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *) # Full, Unknown
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="${capacity}%%"
+ done
+fi
+}
+
+batteryopenbsd(){
+GRML_BATTERY_LEVEL=''
+local bat batfull batwarn batnow num
+for num in 0 1 ; do
+ bat=$(sysctl -n hw.sensors.acpibat${num} 2>/dev/null)
+ if [[ -n $bat ]]; then
+ batfull=${"$(sysctl -n hw.sensors.acpibat${num}.amphour0)"%% *}
+ batwarn=${"$(sysctl -n hw.sensors.acpibat${num}.amphour1)"%% *}
+ batnow=${"$(sysctl -n hw.sensors.acpibat${num}.amphour3)"%% *}
+ case "$(sysctl -n hw.sensors.acpibat${num}.raw0)" in
+ *" discharging"*)
+ if (( batnow < batwarn )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *" charging"*)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ *)
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="${$(( 100 * batnow / batfull ))%%.*}%%"
+ fi
+done
+}
+
+batteryfreebsd(){
+GRML_BATTERY_LEVEL=''
+local num
+local -A table
+for num in 0 1 ; do
+ table=( ${=${${${${${(M)${(f)"$(acpiconf -i $num 2>&1)"}:#(State|Remaining capacity):*}%%( ##|%)}//:[ $'\t']##/@}// /-}//@/ }} )
+ if [[ -n $table ]] && [[ $table[State] != "not-present" ]] ; then
+ case $table[State] in
+ *discharging*)
+ if (( $table[Remaining-capacity] < 20 )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *charging*)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ *)
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="$table[Remaining-capacity]%%"
fi
+done
+}
+
+batterydarwin(){
+GRML_BATTERY_LEVEL=''
+local -a table
+table=( ${$(pmset -g ps)[(w)7,8]%%(\%|);} )
+if [[ -n $table[2] ]] ; then
+ case $table[2] in
+ charging)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ discharging)
+ if (( $table[1] < 20 )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *)
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="$table[1]%%"
fi
}
fi
fi
+typeset -A grml_vcs_coloured_formats
+typeset -A grml_vcs_plain_formats
+
+grml_vcs_plain_formats=(
+ format "(%s%)-[%b] " "zsh: %r"
+ actionformat "(%s%)-[%b|%a] " "zsh: %r"
+ rev-branchformat "%b:%r"
+)
+
+grml_vcs_coloured_formats=(
+ format "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR} "
+ actionformat "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} "
+ rev-branchformat "%b${RED}:${YELLOW}%r"
+)
+
+typeset GRML_VCS_COLOUR_MODE=xxx
+
+grml_vcs_info_toggle_colour () {
+ emulate -L zsh
+ if [[ $GRML_VCS_COLOUR_MODE == plain ]]; then
+ grml_vcs_info_set_formats coloured
+ else
+ grml_vcs_info_set_formats plain
+ fi
+ return 0
+}
+
+grml_vcs_info_set_formats () {
+ emulate -L zsh
+ #setopt localoptions xtrace
+ local mode=$1 AF F BF
+ if [[ $mode == coloured ]]; then
+ AF=${grml_vcs_coloured_formats[actionformat]}
+ F=${grml_vcs_coloured_formats[format]}
+ BF=${grml_vcs_coloured_formats[rev-branchformat]}
+ GRML_VCS_COLOUR_MODE=coloured
+ else
+ AF=${grml_vcs_plain_formats[actionformat]}
+ F=${grml_vcs_plain_formats[format]}
+ BF=${grml_vcs_plain_formats[rev-branchformat]}
+ GRML_VCS_COLOUR_MODE=plain
+ fi
+
+ zstyle ':vcs_info:*' actionformats "$AF" "zsh: %r"
+ zstyle ':vcs_info:*' formats "$F" "zsh: %r"
+ zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "$BF"
+ return 0
+}
+
# Change vcs_info formats for the grml prompt. The 2nd format sets up
# $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
-# TODO: The included vcs_info() version still uses $VCS_INFO_message_N_.
-# That needs to be the use of $VCS_INFO_message_N_ needs to be changed
-# to $vcs_info_msg_N_ as soon as we use the included version.
if [[ "$TERM" == dumb ]] ; then
- zstyle ':vcs_info:*' actionformats "(%s%)-[%b|%a] " "zsh: %r"
- zstyle ':vcs_info:*' formats "(%s%)-[%b] " "zsh: %r"
+ grml_vcs_info_set_formats plain
else
- # these are the same, just with a lot of colors:
- zstyle ':vcs_info:*' actionformats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} " \
- "zsh: %r"
- zstyle ':vcs_info:*' formats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR}%} " \
- "zsh: %r"
- zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "%b${RED}:${YELLOW}%r"
+ grml_vcs_info_set_formats coloured
fi
# Now for the fun part: The grml prompt themes in `promptsys' mode of operation
# below, which gets called when the user does this: prompt -h grml
function prompt_grml_help () {
- cat <<__EOF0__
+ <<__EOF0__
prompt grml
This is the prompt as used by the grml-live system <http://grml.org>. It is
}
function prompt_grml-chroot_help () {
- cat <<__EOF0__
+ <<__EOF0__
prompt grml-chroot
This is a variation of the grml prompt, see: prompt -h grml
}
function prompt_grml-large_help () {
- cat <<__EOF0__
+ <<__EOF0__
prompt grml-large
This is a variation of the grml prompt, see: prompt -h grml
function grml_prompt_setup () {
emulate -L zsh
autoload -Uz vcs_info
- autoload -Uz add-zsh-hook
+ # The following autoload is disabled for now, since this setup includes a
+ # static version of the ‘add-zsh-hook’ function above. It needs to be
+ # reenabled as soon as that static definition is removed again.
+ #autoload -Uz add-zsh-hook
add-zsh-hook precmd prompt_$1_precmd
}
newline ''
path '%B'
percent ''
- rc '%F{red}'
+ rc '%B%F{red}'
rc-always ''
sad-smiley ''
shell-level '%F{red}'
newline ''
path '%b'
percent ''
- rc '%f'
+ rc '%f%b'
rc-always ''
sad-smiley ''
shell-level '%f'
grml_prompt_token_default=(
at '@'
- battery 'PERCENT'
+ battery 'GRML_BATTERY_LEVEL'
change-root 'debian_chroot'
date '%D{%Y-%m-%d}'
grml-chroot 'GRML_CHROOT'
vcs '0'
)
+function grml_theme_has_token () {
+ if (( ARGC != 1 )); then
+ printf 'usage: grml_theme_has_token <name>\n'
+ return 1
+ fi
+ (( ${+grml_prompt_token_default[$1]} ))
+}
+
function GRML_theme_add_token_usage () {
- cat <<__EOF__
+ <<__EOF0__
Usage: grml_theme_add_token <name> [-f|-i] <token/function> [<pre> <post>]
<name> is the name for the newly added token. If the \`-f' or \`-i' options
return value is expected in the \$REPLY parameter. The use of these
options is mutually exclusive.
+ There is a utility function \`grml_theme_has_token', which you can use
+ to test if a token exists before trying to add it. This can be a guard
+ for situations in which a \`grml_theme_add_token' call may happen more
+ than once.
+
Example:
To add a new token \`day' that expands to the current weekday in the
After that, you will be able to use a changed \`items' style to
assemble your prompt.
-__EOF__
+__EOF0__
}
function grml_theme_add_token () {
shift 2
fi
- if (( ${+grml_prompt_token_default[$name]} )); then
+ if grml_theme_has_token $name; then
printf '
grml_theme_add_token: Token `%s'\'' exists! Giving up!\n\n' $name
GRML_theme_add_token_usage
for it in "${items[@]}"; do
zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \
|| apre=${grml_prompt_pre_default[$it]}
- zstyle -s ":prompt:grml:${grmltheme}:${lr}:$it" post apost \
+ zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" post apost \
|| apost=${grml_prompt_post_default[$it]}
zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \
|| new=${grml_prompt_token_default[$it]}
if is437; then
# The prompt themes use modern features of zsh, that require at least
# version 4.3.7 of the shell. Use the fallback otherwise.
- if [[ $BATTERY -gt 0 ]]; then
+ if [[ $GRML_DISPLAY_BATTERY -gt 0 ]]; then
zstyle ':prompt:grml:right:setup' items sad-smiley battery
add-zsh-hook precmd battery
fi
unset i
zstyle ':prompt:grml(|-large|-chroot):right:setup' use-rprompt false
elif (( EUID == 0 )); then
- zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%F{red}'
+ zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%B%F{red}'
fi
# Finally enable one of the prompts.
esac
}
-zrcautoload add-zsh-hook || add-zsh-hook () { :; }
+# The following autoload is disabled for now, since this setup includes a
+# static version of the ‘add-zsh-hook’ function above. It needs to be
+# reenabled as soon as that static definition is removed again.
+#zrcautoload add-zsh-hook || add-zsh-hook () { :; }
if [[ $NOPRECMD -eq 0 ]]; then
add-zsh-hook precmd grml_reset_screen_title
add-zsh-hook precmd grml_vcs_to_screen_title
hash -d log=/var/log
hash -d slog=/var/log/syslog
hash -d src=/usr/src
-hash -d templ=/usr/share/doc/grml-templates
-hash -d tt=/usr/share/doc/texttools-doc
hash -d www=/var/www
#d# end
if check_com -c screen ; then
if [[ $UID -eq 0 ]] ; then
if [[ -r /etc/grml/screenrc ]]; then
- alias screen="${commands[screen]} -c /etc/grml/screenrc"
+ alias screen='screen -c /etc/grml/screenrc'
fi
- elif [[ -r $HOME/.screenrc ]] ; then
- alias screen="${commands[screen]} -c $HOME/.screenrc"
- else
+ elif [[ ! -r $HOME/.screenrc ]] ; then
if [[ -r /etc/grml/screenrc_grml ]]; then
- alias screen="${commands[screen]} -c /etc/grml/screenrc_grml"
+ alias screen='screen -c /etc/grml/screenrc_grml'
else
if [[ -r /etc/grml/screenrc ]]; then
- alias screen="${commands[screen]} -c /etc/grml/screenrc"
+ alias screen='screen -c /etc/grml/screenrc'
fi
fi
fi
# do we have GNU ls with color-support?
if [[ "$TERM" != dumb ]]; then
- #a1# List files with colors (\kbd{ls -b -CF \ldots})
- alias ls='ls -b -CF '${ls_options:+"${ls_options[*]}"}
+ #a1# List files with colors (\kbd{ls \ldots})
+ alias ls="command ls ${ls_options:+${ls_options[*]}}"
#a1# List all files, with colors (\kbd{ls -la \ldots})
- alias la='ls -la '${ls_options:+"${ls_options[*]}"}
+ alias la="command ls -la ${ls_options:+${ls_options[*]}}"
#a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots})
- alias ll='ls -l '${ls_options:+"${ls_options[*]}"}
+ alias ll="command ls -l ${ls_options:+${ls_options[*]}}"
#a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots})
- alias lh='ls -hAl '${ls_options:+"${ls_options[*]}"}
- #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -lF \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
- alias l='ls -lF '${ls_options:+"${ls_options[*]}"}
+ alias lh="command ls -hAl ${ls_options:+${ls_options[*]}}"
+ #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -l \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
+ alias l="command ls -l ${ls_options:+${ls_options[*]}}"
else
- alias ls='ls -b -CF'
- alias la='ls -la'
- alias ll='ls -l'
- alias lh='ls -hAl'
- alias l='ls -lF'
+ alias la='command ls -la'
+ alias ll='command ls -l'
+ alias lh='command ls -hAl'
+ alias l='command ls -l'
fi
alias mdstat='cat /proc/mdstat'
[[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
utf2iso() {
if isutfenv ; then
+ local ENV
for ENV in $(env | command grep -i '.utf') ; do
eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
done
[[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
iso2utf() {
if ! isutfenv ; then
+ local ENV
for ENV in $(env | command grep -i '\.iso') ; do
eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
done
"NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
"NOTITLE=1 zsh" => disable setting the title of xterms without disabling
preexec() and precmd() completely
- "BATTERY=1 zsh" => activate battery status (via acpi) on right side of prompt
+ "GRML_DISPLAY_BATTERY=1 zsh"
+ => activate battery status on right side of prompt (WIP)
"COMMAND_NOT_FOUND=1 zsh"
=> Enable a handler if an external command was not found
The command called in the handler can be altered by setting
# get a root shell as normal user in live-cd mode:
if isgrmlcd && [[ $UID -ne 0 ]] ; then
alias su="sudo su"
- fi
+ fi
#a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog}
salias llog="$PAGER /var/log/syslog" # take a look at the syslog
if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
if check_com -c wodim; then
cdrecord() {
- cat <<EOMESS
+ <<__EOF0__
cdrecord is not provided under its original name by Debian anymore.
See #377109 in the BTS of Debian for more details.
Please use the wodim binary instead
-EOMESS
+__EOF0__
return 1
}
fi
fi
-# Use hard limits, except for a smaller stack and no core dumps
-unlimit
-is425 && limit stack 8192
-isgrmlcd && limit core 0 # important for a live-cd-system
-limit -s
+if isgrmlcd; then
+ # No core dumps: important for a live-cd-system
+ limit -s core 0
+fi
# grmlstuff
grmlstuff() {
freload() { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
compdef _functions freload
-#f1# List symlinks in detail (more detailed version of 'readlink -f' and 'whence -s')
+#
+# Usage:
+#
+# e.g.: a -> b -> c -> d ....
+#
+# sll a
+#
+#
+# if parameter is given with leading '=', lookup $PATH for parameter and resolve that
+#
+# sll =java
+#
+# Note: limit for recursive symlinks on linux:
+# http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/namei.c?id=refs/heads/master#l808
+# This limits recursive symlink follows to 8,
+# while limiting consecutive symlinks to 40.
+#
+# When resolving and displaying information about symlinks, no check is made
+# that the displayed information does make any sense on your OS.
+# We leave that decission to the user.
+#
+# The zstat module is used to detect symlink loops. zstat is available since zsh4.
+# With an older zsh you will need to abort with <C-c> in that case.
+# When a symlink loop is detected, a warning ist printed and further processing is stopped.
+#
+# Module zstat is loaded by default in grml zshrc, no extra action needed for that.
+#
+# Known bugs:
+# If you happen to come accross a symlink that points to a destination on an other partition
+# with the same inode number, that will be marked as symlink loop though it is not.
+# Two hints for this situation:
+# I) Play lottery the same day, as you seem to be rather lucky right now.
+# II) Send patches.
+#
+# return status:
+# 0 upon success
+# 1 file/dir not accesible
+# 2 symlink loop detected
+#
+#f1# List symlinks in detail (more detailed version of 'readlink -f', 'whence -s' and 'namei -l')
sll() {
- [[ -z "$1" ]] && printf 'Usage: %s <file(s)>\n' "$0" && return 1
- for file in "$@" ; do
+ if [[ -z ${1} ]] ; then
+ printf 'Usage: %s <symlink(s)>\n' "${0}"
+ return 1
+ fi
+
+ local file jumpd curdir
+ local -i RTN LINODE i
+ local -a SEENINODES
+ curdir="${PWD}"
+ RTN=0
+
+ for file in "${@}" ; do
+ SEENINODES=()
+ ls -l "${file:a}" || RTN=1
+
while [[ -h "$file" ]] ; do
- ls -l $file
+ if is4 ; then
+ LINODE=$(zstat -L +inode "${file}")
+ for i in ${SEENINODES} ; do
+ if (( ${i} == ${LINODE} )) ; then
+ builtin cd "${curdir}"
+ print "link loop detected, aborting!"
+ return 2
+ fi
+ done
+ SEENINODES+=${LINODE}
+ fi
+ jumpd="${file:h}"
+ file="${file:t}"
+
+ if [[ -d ${jumpd} ]] ; then
+ builtin cd "${jumpd}" || RTN=1
+ fi
file=$(readlink "$file")
+
+ jumpd="${file:h}"
+ file="${file:t}"
+
+ if [[ -d ${jumpd} ]] ; then
+ builtin cd "${jumpd}" || RTN=1
+ fi
+
+ ls -l "${PWD}/${file}" || RTN=1
done
+ shift 1
+ if (( ${#} >= 1 )) ; then
+ print ""
+ fi
+ builtin cd "${curdir}"
done
+ return ${RTN}
}
# TODO: Is it supported to use pager settings like this?
# PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
# with respect to wordsplitting. (ie. ${=PAGER})
if check_com -c $PAGER ; then
- #f3# View Debian's changelog of a given package
+ #f3# View Debian's changelog of given package(s)
dchange() {
emulate -L zsh
- if [[ -r /usr/share/doc/$1/changelog.Debian.gz ]] ; then
- $PAGER /usr/share/doc/$1/changelog.Debian.gz
- elif [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
- $PAGER /usr/share/doc/$1/changelog.gz
- else
- if check_com -c aptitude ; then
- echo "No changelog for package $1 found, using aptitude to retrieve it."
- if isgrml ; then
- aptitude -t unstable changelog $1
+ [[ -z "$1" ]] && printf 'Usage: %s <package_name(s)>\n' "$0" && return 1
+
+ local package
+ for package in "$@" ; do
+ if [[ -r /usr/share/doc/${package}/changelog.Debian.gz ]] ; then
+ $PAGER /usr/share/doc/${package}/changelog.Debian.gz
+ elif [[ -r /usr/share/doc/${package}/changelog.gz ]] ; then
+ $PAGER /usr/share/doc/${package}/changelog.gz
+ elif [[ -r /usr/share/doc/${package}/changelog ]] ; then
+ $PAGER /usr/share/doc/${package}/changelog
+ else
+ if check_com -c aptitude ; then
+ echo "No changelog for package $package found, using aptitude to retrieve it."
+ aptitude changelog "$package"
+ elif check_com -c apt-get ; then
+ echo "No changelog for package $package found, using apt-get to retrieve it."
+ apt-get changelog "$package"
else
- aptitude changelog $1
+ echo "No changelog for package $package found, sorry."
fi
- else
- echo "No changelog for package $1 found, sorry."
- return 1
fi
- fi
+ done
}
_dchange() { _files -W /usr/share/doc -/ }
compdef _dchange dchange
# zsh profiling
profile() {
- ZSH_PROFILE_RC=1 $SHELL "$@"
+ ZSH_PROFILE_RC=1 zsh "$@"
}
#f1# Edit an alias via zle
compdef _functions edfunc
# use it e.g. via 'Restart apache2'
-#m# f6 Start() \kbd{/etc/init.d/\em{process}}\quad\kbd{start}
-#m# f6 Restart() \kbd{/etc/init.d/\em{process}}\quad\kbd{restart}
-#m# f6 Stop() \kbd{/etc/init.d/\em{process}}\quad\kbd{stop}
-#m# f6 Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{reload}
-#m# f6 Force-Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{force-reload}
-#m# f6 Status() \kbd{/etc/init.d/\em{process}}\quad\kbd{status}
+#m# f6 Start() \kbd{service \em{process}}\quad\kbd{start}
+#m# f6 Restart() \kbd{service \em{process}}\quad\kbd{restart}
+#m# f6 Stop() \kbd{service \em{process}}\quad\kbd{stop}
+#m# f6 Reload() \kbd{service \em{process}}\quad\kbd{reload}
+#m# f6 Force-Reload() \kbd{service \em{process}}\quad\kbd{force-reload}
+#m# f6 Status() \kbd{service \em{process}}\quad\kbd{status}
if [[ -d /etc/init.d || -d /etc/service ]] ; then
__start_stop() {
local action_="${1:l}" # e.g Start/Stop/Restart
*) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
esac
else
- # sysvinit
- $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
+ # sysv/sysvinit-utils, upstart
+ if check_com -c service ; then
+ $SUDO service "$service_" "${action_}" "$param_"
+ else
+ $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
+ fi
fi
}
eval "$i() { __start_stop $i \"\$1\" \"\$2\" ; }"
compdef _grmlinitd $i
done
+ builtin unset -v i
fi
#f1# Provides useful information on globbing
}
fi
-# make a backup of a file
-bk() {
- cp -a "$1" "${1}_$(date --iso-8601=seconds)"
-}
-
ssl_hashes=( sha512 sha256 sha1 md5 )
for sh in ${ssl_hashes}; do
}
# make sure our environment is clean regarding colors
-for color in BLUE RED GREEN CYAN YELLOW MAGENTA WHITE ; unset $color
+for var in BLUE RED GREEN CYAN YELLOW MAGENTA WHITE ; unset $var
+builtin unset -v var
# "persistent history"
# just write important commands you always need to ~/.important_commands
# general
#a2# Execute \kbd{du -sch}
alias da='du -sch'
-#a2# Execute \kbd{jobs -l}
-alias j='jobs -l'
# listing stuff
#a2# Execute \kbd{ls -lSrah}
-alias dir="ls -lSrah"
+alias dir="command ls -lSrah"
#a2# Only show dot-directories
-alias lad='ls -d .*(/)'
+alias lad='command ls -d .*(/)'
#a2# Only show dot-files
-alias lsa='ls -a .*(.)'
+alias lsa='command ls -a .*(.)'
#a2# Only files with setgid/setuid/sticky flag
-alias lss='ls -l *(s,S,t)'
+alias lss='command ls -l *(s,S,t)'
#a2# Only show symlinks
-alias lsl='ls -l *(@)'
+alias lsl='command ls -l *(@)'
#a2# Display only executables
-alias lsx='ls -l *(*)'
+alias lsx='command ls -l *(*)'
#a2# Display world-{readable,writable,executable} files
-alias lsw='ls -ld *(R,W,X.^ND/)'
+alias lsw='command ls -ld *(R,W,X.^ND/)'
#a2# Display the ten biggest files
-alias lsbig="ls -flh *(.OL[1,10])"
+alias lsbig="command ls -flh *(.OL[1,10])"
#a2# Only show directories
-alias lsd='ls -d *(/)'
+alias lsd='command ls -d *(/)'
#a2# Only show empty directories
-alias lse='ls -d *(/^F)'
+alias lse='command ls -d *(/^F)'
#a2# Display the ten newest files
-alias lsnew="ls -rtlh *(D.om[1,10])"
+alias lsnew="command ls -rtlh *(D.om[1,10])"
#a2# Display the ten oldest files
-alias lsold="ls -rtlh *(D.Om[1,10])"
+alias lsold="command ls -rtlh *(D.Om[1,10])"
#a2# Display the ten smallest files
-alias lssmall="ls -Srl *(.oL[1,10])"
+alias lssmall="command ls -Srl *(.oL[1,10])"
#a2# Display the ten newest directories and ten newest .directories
-alias lsnewdir="ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
+alias lsnewdir="command ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
#a2# Display the ten oldest directories and ten oldest .directories
-alias lsolddir="ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
+alias lsolddir="command ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
# some useful aliases
#a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD}
# useful functions
-#f5# Backup \kbd{file {\rm to} file\_timestamp}
+#f5# Backup \kbd{file_or_folder {\rm to} file_or_folder\_timestamp}
bk() {
emulate -L zsh
- cp -b $1 $1_`date --iso-8601=m`
+ local current_date=$(date -u "+%Y-%m-%dT%H:%M:%SZ")
+ local clean keep move verbose result all to_bk
+ setopt extended_glob
+ keep=1
+ while getopts ":hacmrv" opt; do
+ case $opt in
+ a) (( all++ ));;
+ c) unset move clean && (( ++keep ));;
+ m) unset keep clean && (( ++move ));;
+ r) unset move keep && (( ++clean ));;
+ v) verbose="-v";;
+ h) <<__EOF0__
+bk [-hcmv] FILE [FILE ...]
+bk -r [-av] [FILE [FILE ...]]
+Backup a file or folder in place and append the timestamp
+Remove backups of a file or folder, or all backups in the current directory
+
+Usage:
+-h Display this help text
+-c Keep the file/folder as is, create a copy backup using cp(1) (default)
+-m Move the file/folder, using mv(1)
+-r Remove backups of the specified file or directory, using rm(1). If none
+ is provided, remove all backups in the current directory.
+-a Remove all (even hidden) backups.
+-v Verbose
+
+The -c, -r and -m options are mutually exclusive. If specified at the same time,
+the last one is used.
+
+The return code is the sum of all cp/mv/rm return codes.
+__EOF0__
+return 0;;
+ \?) bk -h >&2; return 1;;
+ esac
+ done
+ shift "$((OPTIND-1))"
+ if (( keep > 0 )); then
+ if islinux || isfreebsd; then
+ for to_bk in "$@"; do
+ cp $verbose -a "${to_bk%/}" "${to_bk%/}_$current_date"
+ (( result += $? ))
+ done
+ else
+ for to_bk in "$@"; do
+ cp $verbose -pR "${to_bk%/}" "${to_bk%/}_$current_date"
+ (( result += $? ))
+ done
+ fi
+ elif (( move > 0 )); then
+ while (( $# > 0 )); do
+ mv $verbose "${1%/}" "${1%/}_$current_date"
+ (( result += $? ))
+ shift
+ done
+ elif (( clean > 0 )); then
+ if (( $# > 0 )); then
+ for to_bk in "$@"; do
+ rm $verbose -rf "${to_bk%/}"_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z
+ (( result += $? ))
+ done
+ else
+ if (( all > 0 )); then
+ rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z(D)
+ else
+ rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z
+ fi
+ (( result += $? ))
+ fi
+ fi
+ return $result
}
#f5# cd to directoy and list files
#f5# Create temporary directory and \kbd{cd} to it
cdt() {
- local t
- t=$(mktemp -d)
- echo "$t"
- builtin cd "$t"
+ builtin cd "$(mktemp -d)"
+ builtin pwd
}
#f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
check_com new || alias new=modified
# use colors when GNU grep with color-support
-#a2# Execute \kbd{grep -{}-color=auto}
-(( $#grep_options > 0 )) && alias grep='grep '${grep_options:+"${grep_options[*]}"}
+if (( $#grep_options > 0 )); then
+ o=${grep_options:+"${grep_options[*]}"}
+ #a2# Execute \kbd{grep -{}-color=auto}
+ alias grep='grep '$o
+ alias egrep='egrep '$o
+ unset o
+fi
# Translate DE<=>EN
-# 'translate' looks up fot a word in a file with language-to-language
+# 'translate' looks up a word in a file with language-to-language
# translations (field separator should be " : "). A typical wordlist looks
-# like at follows:
-# | english-word : german-transmission
+# like the following:
+# | english-word : german-translation
# It's also only possible to translate english to german but not reciprocal.
-# Use the following oneliner to turn back the sort order:
+# Use the following oneliner to reverse the sort order:
# $ awk -F ':' '{ print $2" : "$1" "$3 }' \
# /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
#f5# Translates a word
simple-extract() {
emulate -L zsh
setopt extended_glob noclobber
- local DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
+ local ARCHIVE DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
local RC=0
zparseopts -D -E "d=DELETE_ORIGINAL"
for ARCHIVE in "${@}"; do
elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
if check_com curl; then
- WGET_CMD="curl -L -k -s -o -"
+ WGET_CMD="curl -L -s -o -"
elif check_com wget; then
- WGET_CMD="wget -q -O - --no-check-certificate"
+ WGET_CMD="wget -q -O -"
+ elif check_com fetch; then
+ WGET_CMD="fetch -q -o -"
else
- print "ERROR: neither wget nor curl is installed" >&2
+ print "ERROR: neither wget, curl nor fetch is installed" >&2
RC=$((RC+4))
continue
fi
compdef _simple_extract simple-extract
alias se=simple-extract
-#f5# Set all ulimit parameters to \kbd{unlimited}
-allulimit() {
- ulimit -c unlimited
- ulimit -d unlimited
- ulimit -f unlimited
- ulimit -l unlimited
- ulimit -n unlimited
- ulimit -s unlimited
- ulimit -t unlimited
-}
-
#f5# Change the xterm title from within GNU-screen
xtrename() {
emulate -L zsh
#f5# GNU like diff for mercurial
hgdi() {
emulate -L zsh
+ local i
for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
}
projects / grml-etc-core.git / blobdiff