@DPATCH@
---- a/scripts/live
-+++ b/scripts/live
-@@ -110,9 +110,8 @@
- ;;
+Index: live-boot-grml/scripts/boot/9990-networking.sh
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-networking.sh 2012-12-03 07:59:14.790837135 +0100
++++ live-boot-grml/scripts/boot/9990-networking.sh 2012-12-03 07:59:19.665258773 +0100
+@@ -2,6 +2,24 @@
- ethdevice=*)
-- DEVICE="${ARGUMENT#ethdevice=}"
-- ETHDEVICE="${DEVICE}"
-- export DEVICE ETHDEVICE
-+ ETHDEVICE="${ARGUMENT#ethdevice=}"
-+ export ETHDEVICE
- ;;
-
- ethdevice-timeout=*)
-@@ -179,13 +178,9 @@
- ;;
-
- ip=*)
-- STATICIP="${ARGUMENT#ip=}"
--
-- if [ -z "${STATICIP}" ]
-- then
-- STATICIP="frommedia"
-- fi
--
-+ # copy complete ip=args into staticip, and
-+ # keep multiple uses.
-+ STATICIP="${STATICIP} ${ARGUMENT}"
- export STATICIP
- ;;
-
-@@ -667,6 +662,24 @@
- return 0
- }
+ #set -e
+get_ipconfig_para()
+{
do_netsetup ()
{
modprobe -q af_packet # For DHCP
-@@ -677,9 +690,19 @@
+@@ -12,8 +30,19 @@
[ -n "$ETHDEV_TIMEOUT" ] || ETHDEV_TIMEOUT=15
echo "Using timeout of $ETHDEV_TIMEOUT seconds for network configuration."
-- if [ -z "${NETBOOT}" ] && [ -z "${FETCH}" ] && \
-- [ -z "${HTTPFS}" ] && [ -z "${FTPFS}" ]
+- if [ -z "${NETBOOT}" ] && [ -z "${FETCH}" ] && [ -z "${HTTPFS}" ] && [ -z "${FTPFS}" ]
- then
+ # Our modus operandi for getting a working network setup is this:
+ # * If ip=* is set, pass that to ipconfig and be done
+ echo "Net: Turning on all device links..."
+ for device in ${ALLDEVICES}; do
+ ipconfig -c none -d $device -t 1 2>/dev/null >/dev/null
-+ done
++ done
+ # support for Syslinux IPAPPEND parameter
+ # it sets the BOOTIF variable on the kernel parameter
+@@ -54,7 +83,7 @@
- # support for Syslinux IPAPPEND parameter
-@@ -722,7 +745,7 @@
-
- if [ "$bootif_mac" = "$current_mac" ]
- then
-- DEVICE=${device##*/}
-+ ETHDEVICE="${device##*/},$ETHDEVICE" # use ethdevice
- break
+ if [ "$bootif_mac" = "$current_mac" ]
+ then
+- DEVICE=${device##*/}
++ ETHDEVICE="${device##*/},$ETHDEVICE" # use ethdevice
+ break
+ fi
fi
- fi
-@@ -734,12 +757,7 @@
- # for *every* present network device (except for loopback of course)
- if [ -z "$ETHDEVICE" ] ; then
- echo "If you want to boot from a specific device use bootoption ethdevice=..."
-- for device in /sys/class/net/*; do
-- dev=${device##*/} ;
-- if [ "$dev" != "lo" ] ; then
-- ETHDEVICE="$ETHDEVICE $dev"
-- fi
-- done
-+ ETHDEVICE="$ALLDEVICES"
- fi
-
- # split args of ethdevice=eth0,eth1 into "eth0 eth1"
-@@ -747,38 +765,27 @@
- devlist="$devlist $device"
- done
-
-- # this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
-- # an endless loop; iff execution fails give it two further tries, that's
-- # why we use '$devlist $devlist $devlist' for the other for loop
-- for dev in $devlist $devlist $devlist ; do
-- echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
-- ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
-- jobid=$!
-- sleep "$ETHDEV_TIMEOUT" ; sleep 1
-- if [ -r /proc/"$jobid"/status ] ; then
-- echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
-- kill -9 $jobid
-+ for dev in $devlist ; do
-+ param="$(get_ipconfig_para $dev)"
-+ if [ -n "$NODHCP" ] && [ "$param" = "$dev" ] ; then
-+ echo "Ignoring network device $dev due to nodhcp." | tee -a /live-boot.log
-+ continue
+@@ -67,14 +96,7 @@
+ if [ -z "$ETHDEVICE" ]
+ then
+ echo "If you want to boot from a specific device use bootoption ethdevice=..."
+- for device in /sys/class/net/*
+- do
+- dev=${device##*/}
+- if [ "$dev" != "lo" ]
+- then
+- ETHDEVICE="$ETHDEVICE $dev"
+- fi
+- done
++ ETHDEVICE="$ALLDEVICES"
fi
-+ echo "Executing ipconfig -t $ETHDEV_TIMEOUT $param"
-+ ipconfig -t "$ETHDEV_TIMEOUT" "$param" | tee -a /netboot.config
- # if configuration of device worked we should have an assigned
- # IP address, iff so let's use the according as $DEVICE for later usage
- # simple and primitive approach which seems to work fine
-- if ifconfig $dev | grep -q 'inet.*addr:' ; then
-- export DEVICE="$dev"
-- break
-+ IPV4ADDR="0.0.0.0"
-+ . /tmp/net-${device}.conf
-+ if [ "${IPV4ADDR}" != "0.0.0.0" ]; then
-+ export DEVICE="$dev $DEVICE"
-+ # break # exit loop as we just use the irst
- fi
-- done
+ # split args of ethdevice=eth0,eth1 into "eth0 eth1"
+@@ -83,46 +105,28 @@
+ devlist="$devlist $device"
+ done
+- # this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
+- # an endless loop; if execution fails give it two further tries, that's
+- # why we use '$devlist $devlist $devlist' for the other for loop
+- for dev in $devlist $devlist $devlist
+- do
+- echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
+- ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
+- jobid=$!
+- sleep "$ETHDEV_TIMEOUT" ; sleep 1
+- if [ -r /proc/"$jobid"/status ]
+- then
+- echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
+- kill -9 $jobid
++ for dev in $devlist ; do
++ param="$(get_ipconfig_para $dev)"
++ if [ -n "$NODHCP" ] && [ "$param" = "$dev" ] ; then
++ echo "Ignoring network device $dev due to nodhcp." | tee -a /live-boot.log
++ continue
+ fi
++ echo "Executing ipconfig -t $ETHDEV_TIMEOUT $param"
++ ipconfig -t "$ETHDEV_TIMEOUT" "$param" | tee -a /netboot.config
+
+ # if configuration of device worked we should have an assigned
+ # IP address, if so let's use the device as $DEVICE for later usage.
+ # simple and primitive approach which seems to work fine
+- if ifconfig $dev | grep -q 'inet.*addr:'
+- then
+- export DEVICE="$dev"
+- break
++ IPV4ADDR="0.0.0.0"
++ if [ -e "/run/net-${device}.conf" ]; then
++ . /run/net-${device}.conf
++ fi
++ if [ "${IPV4ADDR}" != "0.0.0.0" ]; then
++ export DEVICE="$dev $DEVICE"
++ # break # exit loop as we just use the irst
+ fi
+ done
- else
- for interface in ${DEVICE}; do
- ipconfig -t "$ETHDEV_TIMEOUT" ${interface} | tee /netboot-${interface}.config
+-
+- # squeeze
- [ -e /tmp/net-${interface}.conf ] && . /tmp/net-${interface}.conf
+-
+- # wheezy
+- [ -e /run/net-${interface}.conf ] && . /run/net-${interface}.conf
+-
- if [ "$IPV4ADDR" != "0.0.0.0" ]
- then
- break
- fi
- done
- fi
-+ done
-+ unset devlist
++ unset devlist
+
+ for interface in ${DEVICE}
+ do
+Index: live-boot-grml/scripts/boot/9990-cmdline-old
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-cmdline-old 2012-12-03 07:59:14.794839124 +0100
++++ live-boot-grml/scripts/boot/9990-cmdline-old 2012-12-03 07:59:19.665258773 +0100
+@@ -51,9 +51,8 @@
+ ;;
+
+ ethdevice=*)
+- DEVICE="${_PARAMETER#ethdevice=}"
+- ETHDEVICE="${DEVICE}"
+- export DEVICE ETHDEVICE
++ ETHDEVICE="${_PARAMETER#ethdevice=}"
++ export ETHDEVICE
+ ;;
+
+ ethdevice-timeout=*)
+@@ -110,13 +109,9 @@
+ ;;
+
+ ip=*)
+- STATICIP="${_PARAMETER#ip=}"
+-
+- if [ -z "${STATICIP}" ]
+- then
+- STATICIP="frommedia"
+- fi
+-
++ # copy complete ip=args into staticip, and
++ # keep multiple uses.
++ STATICIP="${STATICIP} ${_PARAMETER}"
+ export STATICIP
+ ;;
- for interface in ${DEVICE}; do
- # source relevant ipconfig output
projects / live-boot-grml.git / blobdiff