.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 7 04.12.2011 3.0~a24\-1 "Debian Live Projekt"
+.TH LIVE\-BOOT 7 2012\-04\-09 3.0~a27\-1 "Debian Live Project"
.SH NAME
-\fBlive\-boot\fP \- System Boot Skripte
+\fBlive\-boot\fP \- System Boot Scripts
-.SH BESCHREIBUNG
-\fBlive\-config\fP enthaelt die Skripte welche ein Debian Live System waehrend
-des Startvorganes (early userspace) konfigurieren.
+.SH DESCRIPTION
+\fBlive\-boot\fP contains the scripts that configure a Debian Live system during
+the boot process (early userspace).
.PP
.\" FIXME
live\-boot is a hook for the initramfs\-tools, used to generate a initramfs
squashfs) is stored. If found, it will create a writable environment, using
aufs, for Debian like systems to boot from.
-.SH KONFIGURATION
-\fBlive\-boot\fP kann durch Boot Parameter oder durch Konfigurationsdateien
-konfiguriert werden.
+.SH CONFIGURATION
+\fBlive\-boot\fP can be configured through a boot parameter or a configuration
+file.
.PP
To configure the live\-boot parameters used by default in a live image, see
the \-\-bootappend\-live option in the \fIlb_config\fP(1) manual page.
-.SS "Kernel Parameter"
-\fBlive\-boot\fP ist nur dann aktiv, wenn 'boot=live' als Kernel Parameter
-benutzt wird.
+.SS "Kernel Parameters"
+\fBlive\-boot\fP is only activated if 'boot=live' was used as a kernel
+parameter.
.PP
In addition, there are some more boot parameters to influence the behaviour,
see below.
-.SS Konfigurationsdateien
+.SS "Configuration Files"
\fBlive\-boot\fP can be configured (but not activated) through configuration
files. Those files can be placed either in the root filesystem itself
-(/etc/live/boot.conf, /etc/live/boot.d/), or on the live media
-(live/boot.conf, live/boot.d/).
+(/etc/live/boot.conf, /etc/live/boot.d/*.conf), or on the live media
+(live/boot.conf, live/boot.d/*.conf).
-.SH OPTIONEN
+.SH OPTIONS
.\" FIXME
\fBlive\-boot\fP currently features the following parameters.
.IP \fBaccess\fP=\fIACCESS\fP 4
Lun 0 Path=<path\-to\-your\-live\-image.iso>,Type=fileio,IOMode=ro
# If you want to boot multiple machines you might want to look at tuning some parameters like
# Wthreads or MaxConnections
+.IP \fBfindiso\fP=\fI/PATH/TO/IMAGE\fP 4
+Look for the specified ISO file on all disks where it usually looks for the
+\&.squashfs file (so you don't have to know the device name as in
+fromiso=....).
.IP \fBfromiso\fP=\fI/PATH/TO/IMAGE\fP 4
Allows to use a filesystem from within an iso image that's available on
live\-media.
/etc/fstab. If you have static filesystems on your harddisk and you want
them to be checked at boot time, use this parameter, otherwise they are
skipped.
-.IP \fBnopersistent\fP 4
-disables the "persistent" feature, useful if the bootloader (like syslinux)
-has been installed with persistent enabled.
+.IP \fBnopersistence\fP 4
+disables the "persistence" feature, useful if the bootloader (like syslinux)
+has been installed with persistence enabled.
.IP \fBnoprompt\fP 4
Do not prompt to eject the CD or remove the USB flash drive on reboot.
.IP \fBnoprompt\fP=\fITYPE\fP 4
option has no currently no effect when booting with toram.
.IP \fBswapon\fP 4
This parameter enables usage of local swap partitions.
-.IP \fBpersistent\fP 4
-live\-boot will probe filesystems for persistent media. These can either be
-the filesystems themselves, if labeled correctly, or image/archive files, if
-named correctly. Overlays are labeled/named either "live\-rw" or "home\-rw"
-and will be mounted on / or /home, respectively; snapshots are labeled/named
-either "live\-sn" or "home\-sn" and will be extracted into / or /home,
-respectively (see live\-snapshot(1) for more information). Overlays are
-mounted before snapshots are extracted, and for both overlays and snapshots,
-"live\-*" are handled before "home\-*". Overlay image files and snapshot
-archive files have extensions which determines their filesystem or archive
-type, e.g. "live\-rw.ext3" and "\home\-sn.squashfs".
-.IP "\fBpersistent\-encryption\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
+.IP \fBpersistence\fP 4
+live\-boot will probe devices for persistence media. These can be partitions
+(with the correct GPT name), filesystems (with the correct label) or
+image/archive files (with the correct file name). Overlays are labeled/named
+either "full\-ov", which will be mounted on /, or "custom\-ov", which can be
+completely customized (see \fIlive\-persistence.conf\fP(5)); snapshots are
+labeled/named either "live\-sn" or "home\-sn" and will be extracted into / or
+/home, respectively (see \fIlive\-snapshot\fP(1) for more information). The
+order these are handled are: full\-ov, custom\-ov, live\-sn, home\-sn. Overlay
+image files and snapshot archive files have extensions which determines
+their filesystem or archive type, e.g. "custom\-ov.ext4" and
+"\home\-sn.squashfs".
+.IP "\fBpersistence\-encryption\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
This option determines which types of encryption that we allow to be used
-when probing devices for persistent media. If "none" is in the list, we
+when probing devices for persistence media. If "none" is in the list, we
allow unencrypted media; if "luks" is in the list, we allow LUKS\-encrypted
media. Whenever a device containing encrypted media is probed the user will
be prompted for the passphrase. The default value is "none".
-.IP \fBpersistent\-media\fP={\fIremovable\fP|\fIremovable\-usb\fP} 4
+.IP \fBpersistence\-media\fP={\fIremovable\fP|\fIremovable\-usb\fP} 4
If you specify the keyword 'removable', live\-boot will try to find
-persistent and snapshot partitions on removable media only. Note that if you
-want to further restrict the media to usb mass storage only, you can use the
-\&'removable\-usb' keyword.
-.IP "\fBpersistent\-method\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
-This option determines which types of persistent media we allow. If
+persistence and snapshot partitions on removable media only. Note that if
+you want to further restrict the media to usb mass storage only, you can use
+the 'removable\-usb' keyword.
+.IP "\fBpersistence\-method\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
+This option determines which types of persistence media we allow. If
"overlay" is in the list, we consider overlays (i.e. "live\-rw" and
"home\-rw"); if "snapshot" is in the list, we consider snapshots
(i.e. "live\-sn" and "home\-sn"). The default is "overlay,snapshot".
-.IP \fBpersistent\-path\fP=\fIPATH\fP 4
+.IP \fBpersistence\-path\fP=\fIPATH\fP 4
live\-boot will look for persistency files in the root directory of a
partition, with this parameter, the path can be configured so that you can
have multiple directories on the same partition to store persistency files.
-.IP \fBpersistent\-read\-only\fP 4
-Filesystem changes are not saved back to persistent media. In particular,
+.IP \fBpersistence\-read\-only\fP 4
+Filesystem changes are not saved back to persistence media. In particular,
overlays and netboot NFS mounts are mounted read\-only, and snapshots are not
resynced on shutdown.
-.IP "\fBpersistent\-storage\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
-This option determines which types of persistent storage to consider when
-probing for persistent media. If "filesystem" is in the list, filesystems
+.IP "\fBpersistence\-storage\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
+This option determines which types of persistence storage to consider when
+probing for persistence media. If "filesystem" is in the list, filesystems
with matching labels will be used; if "file" is in the list, all filesystems
will be probed for archives and image files with matching filenames. The
default is "file,filesystem".
-.IP \fBpersistent\-subtext\fP=\fISUFFIX\fP 4
+.IP \fBpersistence\-subtext\fP=\fISUFFIX\fP 4
Add a suffix when searching for the image filenames or partition labels to
-use for the above mentioned persistent feature, the SUFFIX will be added
+use for the above mentioned persistence feature, the SUFFIX will be added
after a dash (e.g.: "live\-sn" would transform to "live\-sn\-SUFFIX"). This is
handy to test multiple live\-boot based live\-systems with different
-persistent storage choices.
-.IP {\fBpreseed/file\fP|\fBfile\fP}=\fIFILE\fP 4
-A path to a file present on the rootfs could be used to preseed debconf
-database.
-.IP \fBpackage/question\fP=\fIVALUE\fP 4
-All debian installed packages could be preseeded from command\-line that way,
-beware of blanks spaces, they will interfere with parsing, use a preseed
-file in this case.
+persistence storage choices.
.IP \fBquickreboot\fP 4
This option causes live\-boot to reboot without attempting to eject the media
and without asking the user to remove the boot media.
merged into the root aufs, and they will be loaded in the order listed
here. The first entry in this file will be the "lowest" point in the aufs,
and the last file in this list will be on the "top" of the aufs, directly
-below /cow. Without this file, any images in the "/live" directory are
+below /overlay. Without this file, any images in the "/live" directory are
loaded in alphanumeric order.
.IP \fB/etc/live\-persistence.binds\fP 4
This optional file (which resides in the rootfs system, not in the live
regenerated each time. This is achieved by bind mounting each listed
directory with a tmpfs on the original path.
-.SH DATEIEN
+.SH FILES
.IP \fB/etc/live/boot.conf\fP 4
-.IP \fB/etc/live/boot.d/\fP 4
+.IP \fB/etc/live/boot.d/*.conf\fP 4
.IP \fBlive/boot.conf\fP 4
-.IP \fBlive/boot.d/\fP 4
+.IP \fBlive/boot.d/*.conf\fP 4
+.IP \fBlive\-persistence.conf\fP 4
-.SH "SIEHE AUCH"
+.SH "SEE ALSO"
\fIlive\-snapshot\fP(1)
.PP
+\fIlive\-persistence.conf\fP(5)
+.PP
\fIlive\-build\fP(7)
.PP
\fIlive\-config\fP(7)
\fIlive\-tools\fP(7)
.SH HOMEPAGE
-Weitere Informationen ueber live\-boot und das Debian Live Projekt koennen
-auf der Homepage unter <\fIhttp://live.debian.net/\fP> und im Handbuch
-unter <\fIhttp://live.debian.net/manual/\fP> gefunden werden.
+More information about live\-boot and the Debian Live project can be found on
+the homepage at <\fIhttp://live.debian.net/\fP> and in the manual at
+<\fIhttp://live.debian.net/manual/\fP>.
-.SH FEHLER
-Fehler koennen durch Einreichen eines Fehlerberichtes fuer das live\-boot
-Paket im Debian Bug Tracking System unter
-<\fIhttp://bugs.debian.org/\fP> oder durch Senden einer E\-Mail an die
-Debian Live Mailing Liste unter <\fIdebian\-live@lists.debian.org\fP>
-(englischsprachig) mitgeteilt werden.
+.SH BUGS
+Bugs can be reported by submitting a bugreport for the live\-boot package in
+the Debian Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
+writing a mail to the Debian Live mailing list at
+<\fIdebian\-live@lists.debian.org\fP>.
-.SH AUTOR
-live\-boot wurde von Daniel Baumann <\fIdaniel@debian.org\fP> fuer das
-Debian Projekt geschrieben.
+.SH AUTHOR
+live\-boot was written by Daniel Baumann <\fIdaniel@debian.org\fP> for
+the Debian project.
projects / live-boot-grml.git / blobdiff