-.TH LIVE\-BOOT 7 2012\-06\-28 3.0~a35-1 "Debian Live Project"
+.TH LIVE\-BOOT 7 2013\-01\-02 4.0~a4-1 "Debian Live Project"
.SH NAME
\fBlive\-boot\fR \- System Boot Scripts
In addition, there are some more boot parameters to influence the behaviour, see below.
.SS Configuration Files
-\fBlive\-boot\fR can be configured (but not activated) through configuration files. Those files can be placed either in the root filesystem itself (/etc/live/boot.conf, /etc/live/boot.d/*.conf), or on the live media (live/boot.conf, live/boot.d/*.conf).
+\fBlive\-boot\fR can be configured (but not activated) through configuration files. Those files can be placed either in the root filesystem itself (/etc/live/boot.conf, /etc/live/boot/*), or on the live media (live/boot.conf, live/boot/*).
.SH OPTIONS
\fBlive\-boot\fR currently features the following parameters.
Do not check that any UUID embedded in the initramfs matches the discovered medium. live\-boot may be told to generate a UUID by setting LIVE_GENERATE_UUID=1 when building the initramfs.
.IP "\fBverify\-checksums\fR" 4
If specified, an MD5 sum is calculated on the live media during boot and compared to the value found in md5sum.txt found in the root directory of the live media.
-.IP "\fBip\fR=[\fIDEVICE\fR]:[\fICLIENT_IP\fR]:[\fISERVER_IP\fR]:[\fIGATEWAY_IP\fR]:[\fINETMASK\fR]:[\fIHOSTNAME\fR]:[\fIAUTOCONF\fR] [,[\fIDEVICE\fR]:[\fICLIENT_IP\fR]:[\fISERVER_IP\fR]:[\fIGATEWAY_IP\fR]:[\fINETMASK\fR]:[\fIHOSTNAME\fR]:[\fIAUTOCONF\fR]]" 4
+.IP "\fBip\fR=[\fIDEVICE\fR]:[\fICLIENT_IP\fR]:[\fINETMASK\fR]:[\fIGATEWAY_IP\fR]:[\fINAMESERVER\fR] [,[\fIDEVICE\fR]:[\fICLIENT_IP\fR]:[\fINETMASK\fR]:[\fIGATEWAY_IP\fR]:[\fINAMESERVER\fR]]" 4
Let you specify the name(s) and the options of the interface(s) that should be configured at boot time. Do not specify this if you want to use dhcp (default). It will be changed in a future release to mimick official kernel boot param specification (e.g. ip=10.0.0.1::10.0.0.254:255.255.255.0::eth0,:::::eth1:dhcp).
.IP "\fBip\fR=[\fIfrommedia\fR]" 4
If this variable is set, dhcp and static configuration are just skipped and the system will use the (must be) media\-preconfigured /etc/network/interfaces instead.
.IP "\fBswapon\fR" 4
This parameter enables usage of local swap partitions.
.IP "\fBpersistence\fR" 4
-live\-boot will probe devices for persistence media. These can be partitions (with the correct GPT name), filesystems (with the correct label) or image files (with the correct file name). Overlays are labeled/named "persistence" (see \fIlive-persistence.conf\fR(5)). Overlay image files have extensions which determines their filesystem, e.g. "persistence.ext4".
+live\-boot will probe devices for persistence media. These can be partitions (with the correct GPT name), filesystems (with the correct label) or image files (with the correct file name). Overlays are labeled/named "persistence" (see \fIpersistence.conf\fR(5)). Overlay image files have extensions which determines their filesystem, e.g. "persistence.ext4".
.IP "\fBpersistence\-encryption\fR=\fITYPE1\fR,\fITYPE2\fR ... \fITYPEn\fR" 4
This option determines which types of encryption that we allow to be used when probing devices for persistence media. If "none" is in the list, we allow unencrypted media; if "luks" is in the list, we allow LUKS\-encrypted media. Whenever a device containing encrypted media is probed the user will be prompted for the passphrase. The default value is "none".
.IP "\fBpersistence\-media\fR={\fIremovable\fR|\fIremovable\-usb\fR}" 4
.IP "\fBquickreboot\fR" 4
This option causes live\-boot to reboot without attempting to eject the media and without asking the user to remove the boot media.
.IP "\fBshowmounts\fR" 4
-This parameter will make live\-boot to show on "/" the ro filesystems (mostly compressed) on "/live". This is not enabled by default because could lead to problems by applications like "mono" which store binary paths on installation.
+This parameter will make live\-boot to show on "/" the ro filesystems (mostly compressed) on "/lib/live". This is not enabled by default because could lead to problems by applications like "mono" which store binary paths on installation.
.IP "\fBsilent\fR" 4
If you boot with the normal quiet parameter, live\-boot hides most messages of its own. When adding silent, it hides all.
.IP "\fBtodisk\fR=\fIDEVICE\fR" 4
.SH FILES
.IP "\fB/etc/live/boot.conf\fR" 4
-.IP "\fB/etc/live/boot.d/*.conf\fR" 4
+.IP "\fB/etc/live/boot/*\fR" 4
.IP "\fBlive/boot.conf\fR" 4
-.IP "\fBlive/boot.d/*.conf\fR" 4
-.IP "\fBlive-persistence.conf\fR" 4
+.IP "\fBlive/boot/*\fR" 4
+.IP "\fBpersistence.conf\fR" 4
.SH SEE ALSO
-\fIlive-persistence.conf\fR(5)
+\fIpersistence.conf\fR(5)
.PP
\fIlive\-build\fR(7)
.PP
projects / live-boot-grml.git / blobdiff