NOMENU=${NOMENU:-0}
NOPRECMD=${NOPRECMD:-0}
BATTERY=${BATTERY:-0}
+GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
+GRML_ALWAYS_LOAD_ALL=${GRML_ALWAYS_LOAD_ALL:-0}
# }}}
# {{{ check for version/system
ZSHRC_GLOBAL_HAS_BEEN_READ=1
# }}}
+###
+### non-root (EUID == 0) code below
+###
+
+(( GRML_ALWAYS_LOAD_ALL == 0 )) && (( $EUID == 0 )) && return 0
+
+# source ~/.zshrc.global {{{
+
+# see /etc/zsh/zshrc for some general settings
+# If you don't have write permissions to /etc/zsh/zshrc on your own
+# copy the file to your $HOME as /.zshrc.global and we source it:
+
+# Note, that xsource() is defined in the global file, so here,
+# we will have to do the sourcing manually for once:
+
+[[ -z "$ZSHRC_GLOBAL_HAS_BEEN_READ" ]] \
+&& [[ -r "${HOME}/.zshrc.global" ]] \
+&& source "${HOME}/.zshrc.global"
+# }}}
+
+# check whether global file has been read {{{
+if [[ -z "$ZSHRC_GLOBAL_HAS_BEEN_READ" ]] ; then
+ print 'Warning: global zsh config has not been read.' >&2
+ print ' prepare for possible errors!' >&2
+ print '' >&2
+ print 'See our refcard for info on how to get the complete configuration:' >&2
+ print ' <http://grml.org/zsh/grml-zsh-refcard.pdf>' >&2
+fi
+# }}}
+
+# autoloading stuff {{{
+# associate types and extensions (be aware with perl scripts and anwanted behaviour!)
+# check_com zsh-mime-setup || { autoload zsh-mime-setup && zsh-mime-setup }
+# alias -s pl='perl -S'
+# }}}
+
+# completion system {{{
+# just make sure it is loaded in this file too
+# TODO: is this *really* needed? compsys should be run in the global zshrc already.
+check_com compinit || { autoload -U compinit && compinit }
+# }}}
+
+# make sure isgrmlsmall is defined {{{
+check_com isgrmlsmall || function isgrmlsmall () { return 1 }
+# }}}
+
+# variables {{{
+
+# set terminal property (used e.g. by msgid-chooser)
+export COLORTERM="yes"
+
+# set default browser
+if [[ -z "$BROWSER" ]] ; then
+ if [[ -n "$DISPLAY" ]] ; then
+ #v# If X11 is running
+ check_com -c firefox && export BROWSER=firefox
+ else
+ #v# If no X11 is running
+ check_com -c w3m && export BROWSER=w3m
+ fi
+fi
+
+#m# v QTDIR \kbd{/usr/share/qt[34]}\quad [for non-root only]
+[[ -d /usr/share/qt3 ]] && export QTDIR=/usr/share/qt3
+[[ -d /usr/share/qt4 ]] && export QTDIR=/usr/share/qt4
+
+# support running 'jikes *.java && jamvm HelloWorld' OOTB:
+#v# [for non-root only]
+[[ -f /usr/share/classpath/glibj.zip ]] && export JIKESPATH=/usr/share/classpath/glibj.zip
+# }}}
+
+# set options {{{
+
+# Allow comments even in interactive shells i. e.
+# $ uname # This command prints system informations
+# zsh: bad pattern: #
+# $ setopt interactivecomments
+# $ uname # This command prints system informations
+# Linux
+# setopt interactivecomments
+
+# ctrl-s will no longer freeze the terminal.
+# stty erase "^?"
+
+# }}}
+
+# {{{ global aliases
+# These do not have to be at the beginning of the command line.
+# Avoid typing cd ../../ for going two dirs down and so on
+# Usage, e.g.: "$ cd ...' or just '$ ...' with 'setopt auto_cd'
+# Notice: deactivated by 061112 by default, we use another approach
+# known as "power completion / abbreviation expansion"
+# alias -g '...'='../..'
+# alias -g '....'='../../..'
+# alias -g BG='& exit'
+# alias -g C='|wc -l'
+# alias -g G='|grep'
+# alias -g H='|head'
+# alias -g Hl=' --help |& less -r'
+# alias -g K='|keep'
+# alias -g L='|less'
+# alias -g LL='|& less -r'
+# alias -g M='|most'
+# alias -g N='&>/dev/null'
+# alias -g R='| tr A-z N-za-m'
+# alias -g SL='| sort | less'
+# alias -g S='| sort'
+# alias -g T='|tail'
+# alias -g V='| vim -'
+# }}}
+
+# aliases {{{
+
+# Xterm resizing-fu.
+# Based on http://svn.kitenet.net/trunk/home-full/.zshrc?rev=11710&view=log (by Joey Hess)
+alias hide='echo -en "\033]50;nil2\007"'
+alias tiny='echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15\007"'
+alias small='echo -en "\033]50;6x10\007"'
+alias medium='echo -en "\033]50;-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15\007"'
+alias default='echo -e "\033]50;-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15\007"'
+alias large='echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-150-*-*-c-*-iso8859-15\007"'
+alias huge='echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15\007"'
+alias smartfont='echo -en "\033]50;-artwiz-smoothansi-*-*-*-*-*-*-*-*-*-*-*-*\007"'
+alias semifont='echo -en "\033]50;-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15\007"'
+# if [[ "$TERM" == "xterm" ]] && [[ "$LINES" -ge 50 ]] && [[ "$COLUMNS" -ge 100 ]] && [[ -z "$SSH_CONNECTION" ]] ; then
+# large
+# fi
+
+# general
+#a2# Execute \kbd{du -sch}
+alias da='du -sch'
+#a2# Execute \kbd{jobs -l}
+alias j='jobs -l'
+# alias u='translate -i' # translate
+
+# compile stuff
+#a2# Execute \kbd{./configure}
+alias CO="./configure"
+#a2# Execute \kbd{./configure --help}
+alias CH="./configure --help"
+
+# http://conkeror.mozdev.org/
+#a2# Run a keyboard driven firefox
+alias conkeror='firefox -chrome chrome://conkeror/content'
+
+# arch/tla stuff
+if check_com -c tla ; then
+ #a2# Execute \kbd{tla what-changed --diffs | less}
+ alias tdi='tla what-changed --diffs | less'
+ #a2# Execute \kbd{tla-buildpackage}
+ alias tbp='tla-buildpackage'
+ #a2# Execute \kbd{tla archive-mirror}
+ alias tmi='tla archive-mirror'
+ #a2# Execute \kbd{tla commit}
+ alias tco='tla commit'
+ #a2# Execute \kbd{tla star-merge}
+ alias tme='tla star-merge'
+fi
+
+# listing stuff
+#a2# Execute \kbd{ls -lSrah}
+alias dir="ls -lSrah"
+#a2# Only show dot-directories
+alias lad='ls -d .*(/)' # only show dot-directories
+#a2# Only show dot-files
+alias lsa='ls -a .*(.)' # only show dot-files
+#a2# Only files with setgid/setuid/sticky flag
+alias lss='ls -l *(s,S,t)' # only files with setgid/setuid/sticky flag
+#a2# Only show 1st ten symlinks
+alias lsl='ls -l *(@[1,10])' # only symlinks
+#a2# Display only executables
+alias lsx='ls -l *(*[1,10])' # only executables
+#a2# Display world-{readable,writable,executable} files
+alias lsw='ls -ld *(R,W,X.^ND/)' # world-{readable,writable,executable} files
+#a2# Display the ten biggest files
+alias lsbig="ls -flh *(.OL[1,10])" # display the biggest files
+#a2# Only show directories
+alias lsd='ls -d *(/)' # only show directories
+#a2# Only show empty directories
+alias lse='ls -d *(/^F)' # only show empty directories
+#a2# Display the ten newest files
+alias lsnew="ls -rl *(D.om[1,10])" # display the newest files
+#a2# Display the ten oldest files
+alias lsold="ls -rtlh *(D.om[1,10])" # display the oldest files
+#a2# Display the ten smallest files
+alias lssmall="ls -Srl *(.oL[1,10])" # display the smallest files
+
+# chmod
+#a2# Execute \kbd{chmod 600}
+alias rw-='chmod 600'
+#a2# Execute \kbd{chmod 700}
+alias rwx='chmod 700'
+#m# a2 r-{}- Execute \kbd{chmod 644}
+alias r--='chmod 644'
+#a2# Execute \kbd{chmod 755}
+alias r-x='chmod 755'
+
+# some useful aliases
+#a2# Execute \kbd{mkdir -o}
+alias md='mkdir -p'
+
+check_com -c ipython && alias ips='ipython -p sh'
+
+# console stuff
+#a2# Execute \kbd{mplayer -vo fbdev}
+alias cmplayer='mplayer -vo fbdev'
+#a2# Execute \kbd{mplayer -vo fbdev -fs -zoom}
+alias fbmplayer='mplayer -vo fbdev -fs -zoom'
+#a2# Execute \kbd{links2 -driver fb}
+alias fblinks='links2 -driver fb'
+
+# ignore ~/.ssh/known_hosts entries
+# alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null" -o "PreferredAuthentications=keyboard-interactive"'
+#a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
+alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
+alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
+
+# simple webserver
+check_com -c python && alias http="python -m SimpleHTTPServer"
+
+# Use 'g' instead of 'git':
+check_com g || alias g='git'
+
+# use colors when browsing man pages, but only if not using LESS_TERMCAP_* from /etc/zsh/zshenv:
+if [[ -z "$LESS_TERMCAP_md" ]] ; then
+ [[ -d ~/.terminfo/ ]] && alias man='TERMINFO=~/.terminfo/ LESS=C TERM=mostlike PAGER=less man'
+fi
+
+# check whether Debian's package management (dpkg) is running
+if check_com salias ; then
+ #a2# Check whether a dpkg instance is currently running
+ salias check_dpkg_running="dpkg_running"
+fi
+
+# work around non utf8 capable software in utf environment via $LANG and luit
+if check_com isutfenv && check_com luit ; then
+ if check_com -c mrxvt ; then
+ isutfenv && [[ -n "$LANG" ]] && \
+ alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
+ fi
+
+ if check_com -c aterm ; then
+ isutfenv && [[ -n "$LANG" ]] && \
+ alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
+ fi
+
+ if check_com -c centericq ; then
+ isutfenv && [[ -n "$LANG" ]] && \
+ alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
+ fi
+fi
+# }}}
+
+# useful functions {{{
+
+# searching
+#f4# Search for newspostings from authors
+agoogle() { ${=BROWSER} "http://groups.google.com/groups?as_uauthors=$*" ; }
+#f4# Search Debian Bug Tracking System
+debbug() {
+ setopt localoptions extendedglob
+ if [[ $# -eq 1 ]]; then
+ case "$1" in
+ ([0-9]##)
+ ${=BROWSER} "http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=$1"
+ ;;
+ (*@*)
+ ${=BROWSER} "http://bugs.debian.org/cgi-bin/pkgreport.cgi?submitter=$1"
+ ;;
+ (*)
+ ${=BROWSER} "http://bugs.debian.org/$*"
+ ;;
+ esac
+ else
+ print "$0 needs one argument"
+ return 1
+ fi
+}
+#f4# Search Debian Bug Tracking System in mbox format
+debbugm() { bts show --mbox $1 } # provide bugnummer as "$1"
+#f4# Search DMOZ
+dmoz() { ${=BROWSER} http://search.dmoz.org/cgi-bin/search\?search=${1// /_} }
+#f4# Search German Wiktionary
+dwicti() { ${=BROWSER} http://de.wiktionary.org/wiki/${(C)1// /_} }
+#f4# Search English Wiktionary
+ewicti() { ${=BROWSER} http://en.wiktionary.org/wiki/${(C)1// /_} }
+#f4# Search Google Groups
+ggogle() { ${=BROWSER} "http://groups.google.com/groups?q=$*" }
+#f4# Search Google
+google() { ${=BROWSER} "http://www.google.com/search?&num=100&q=$*" }
+#f4# Search Google Groups for MsgID
+mggogle() { ${=BROWSER} "http://groups.google.com/groups?selm=$*" }
+#f4# Search Netcraft
+netcraft(){ ${=BROWSER} "http://toolbar.netcraft.com/site_report?url=$1" }
+#f4# Use German Wikipedia's full text search
+swiki() { ${=BROWSER} http://de.wikipedia.org/wiki/Spezial:Search/${(C)1} }
+#f4# search \kbd{dict.leo.org}
+oleo() { ${=BROWSER} "http://dict.leo.org/?search=$*" }
+#f4# Search German Wikipedia
+wikide() { ${=BROWSER} http://de.wikipedia.org/wiki/"${(C)*}" }
+#f4# Search English Wikipedia
+wikien() { ${=BROWSER} http://en.wikipedia.org/wiki/"${(C)*}" }
+#f4# Search official debs
+wodeb() { ${=BROWSER} "http://packages.debian.org/search?keywords=$1&searchon=contents&suite=${2:=unstable}§ion=all" }
+
+#m# f4 gex() Exact search via Google
+check_com google && gex () { google "\"[ $1]\" $*" } # exact search at google
+
+# misc
+#f5# Backup \kbd{file {\rm to} file\_timestamp}
+bk() { cp -b ${1} ${1}_`date --iso-8601=m` }
+#f5# Copied diff
+cdiff() { diff -crd "$*" | egrep -v "^Only in |^Binary files " }
+#f5# cd to directoy and list files
+cl() { cd $1 && ls -a } # cd && ls
+#f5# Cvs add
+cvsa() { cvs add $* && cvs com -m 'initial checkin' $* }
+#f5# Cvs diff
+cvsd() { cvs diff -N $* |& $PAGER }
+#f5# Cvs log
+cvsl() { cvs log $* |& $PAGER }
+#f5# Cvs update
+cvsq() { cvs -nq update }
+#f5# Rcs2log
+cvsr() { rcs2log $* | $PAGER }
+#f5# Cvs status
+cvss() { cvs status -v $* }
+#f5# Disassemble source files using gcc and as
+disassemble(){ gcc -pipe -S -o - -O -g $* | as -aldh -o /dev/null }
+#f5# Firefox remote control - open given URL
+fir() { firefox -a firefox -remote "openURL($1)" }
+#f5# Create Directoy and \kbd{cd} to it
+mcd() { mkdir -p "$@"; cd "$@" } # mkdir && cd
+#f5# Unified diff to timestamped outputfile
+mdiff() { diff -udrP "$1" "$2" > diff.`date "+%Y-%m-%d"`."$1" }
+#f5# Memory overview
+memusage(){ ps aux | awk '{if (NR > 1) print $5; if (NR > 2) print "+"} END { print "p" }' | dc }
+#f5# Show contents of tar file
+shtar() { gunzip -c $1 | tar -tf - -- | $PAGER }
+#f5# Show contents of tgz file
+shtgz() { tar -ztf $1 | $PAGER }
+#f5# Show contents of zip file
+shzip() { unzip -l $1 | $PAGER }
+#f5# Greps signature from file
+sig() { agrep -d '^-- $' "$*" ~/.Signature }
+#f5# Unified diff
+udiff() { diff -urd $* | egrep -v "^Only in |^Binary files " }
+#f5# (Mis)use \kbd{vim} as \kbd{less}
+viless() { vim --cmd 'let no_plugin_maps = 1' -c "so \$VIMRUNTIME/macros/less.vim" "${@:--}" }
+
+# download video from youtube
+ytdl() {
+ if ! [[ -n "$2" ]] ; then
+ print "Usage: ydtl http://youtube.com/watch?v=.... outputfile.flv">&2
+ return 1
+ else
+ wget -O${2} "http://youtube.com/get_video?"${${${"$(wget -o/dev/null -O- "${1}" | grep -e watch_fullscreen)"}##*watch_fullscreen\?}%%\&fs=*}
+ fi
+}
+
+# Function Usage: uopen $URL/$file
+#f5# Download a file and display it locally
+uopen() {
+ if ! [[ -n "$1" ]] ; then
+ print "Usage: uopen \$URL/\$file">&2
+ return 1
+ else
+ FILE=$1
+ MIME=$(curl --head $FILE | grep Content-Type | cut -d ' ' -f 2 | cut -d\; -f 1)
+ MIME=${MIME%$'\r'}
+ curl $FILE | see ${MIME}:-
+ fi
+}
+
+# Function Usage: doc packagename
+#f5# \kbd{cd} to /usr/share/doc/\textit{package}
+doc() { cd /usr/share/doc/$1 && ls }
+_doc() { _files -W /usr/share/doc -/ }
+check_com compdef && compdef _doc doc
+
+#f5# Make screenshot
+sshot() {
+ [[ ! -d ~/shots ]] && mkdir ~/shots
+ #cd ~/shots ; sleep 5 ; import -window root -depth 8 -quality 80 `date "+%Y-%m-%d--%H:%M:%S"`.png
+ cd ~/shots ; sleep 5; import -window root shot_`date --iso-8601=m`.jpg
+}
+
+# list images only
+limg() {
+ local -a images
+ images=( *.{jpg,gif,png}(.N) )
+
+ if [[ $#images -eq 0 ]] ; then
+ print "No image files found"
+ else
+ ls "$@" "$images[@]"
+ fi
+}
+
+#f5# Create PDF file from source code
+makereadable() {
+ output=$1
+ shift
+ a2ps --medium A4dj -E -o $output $*
+ ps2pdf $output
+}
+
+# zsh with perl-regex - use it e.g. via:
+# regcheck '\s\d\.\d{3}\.\d{3} Euro' ' 1.000.000 Euro'
+#f5# Checks whether a regex matches or not.\\&\quad Example: \kbd{regcheck '.\{3\} EUR' '500 EUR'}
+regcheck() {
+ zmodload -i zsh/pcre
+ pcre_compile $1 && \
+ pcre_match $2 && echo "regex matches" || echo "regex does not match"
+}
+
+#f5# List files which have been modified within the last {\it n} days
+new() { print -l *(m-$1) }
+
+#f5# Grep in history
+greph() { history 0 | grep $1 }
+# use colors when GNU grep with color-support
+#a2# Execute \kbd{grep -{}-color=auto}
+(grep --help 2>/dev/null |grep -- --color) >/dev/null && alias grep='grep --color=auto'
+#a2# Execute \kbd{grep -i -{}-color=auto}
+alias GREP='grep -i --color=auto'
+
+# one blank line between each line
+if [[ -r ~/.terminfo/m/mostlike ]] ; then
+# alias man2='MANPAGER="sed -e G |less" TERMINFO=~/.terminfo TERM=mostlike /usr/bin/man'
+ #f5# Watch manpages in a stretched style
+ man2() { PAGER='dash -c "sed G | /usr/bin/less"' TERM=mostlike /usr/bin/man "$@" ; }
+fi
+
+# d():Copyright 2005 Nikolai Weibull <nikolai@bitwi.se>
+# notice: option AUTO_PUSHD has to be set
+#f5# Jump between directories
+d() {
+ emulate -L zsh
+ autoload -U colors
+ local color=$fg_bold[blue]
+ integer i=0
+ dirs -p | while read dir; do
+ local num="${$(printf "%-4d " $i)/ /.}"
+ printf " %s $color%s$reset_color\n" $num $dir
+ (( i++ ))
+ done
+ integer dir=-1
+ read -r 'dir?Jump to directory: ' || return
+ (( dir == -1 )) && return
+ if (( dir < 0 || dir >= i )); then
+ echo d: no such directory stack entry: $dir
+ return 1
+ fi
+ cd ~$dir
+}
+
+# usage example: 'lcheck strcpy'
+#f5# Find out which libs define a symbol
+lcheck() {
+ if [[ -n "$1" ]] ; then
+ nm -go /usr/lib/lib*.a 2>/dev/null | grep ":[[:xdigit:]]\{8\} . .*$1"
+ else
+ echo "Usage: lcheck <function>" >&2
+ fi
+}
+
+#f5# Clean up directory - remove well known tempfiles
+purge() {
+ FILES=(*~(N) .*~(N) \#*\#(N) *.o(N) a.out(N) *.core(N) *.cmo(N) *.cmi(N) .*.swp(N))
+ NBFILES=${#FILES}
+ if [[ $NBFILES > 0 ]] ; then
+ print $FILES
+ local ans
+ echo -n "Remove these files? [y/n] "
+ read -q ans
+ if [[ $ans == "y" ]] ; then
+ rm ${FILES}
+ echo ">> $PWD purged, $NBFILES files removed"
+ else
+ echo "Ok. .. than not.."
+ fi
+ fi
+}
+
+# Translate DE<=>EN
+# 'translate' looks up fot a word in a file with language-to-language
+# translations (field separator should be " : "). A typical wordlist looks
+# like at follows:
+# | english-word : german-transmission
+# It's also only possible to translate english to german but not reciprocal.
+# Use the following oneliner to turn back the sort order:
+# $ awk -F ':' '{ print $2" : "$1" "$3 }' \
+# /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
+#f5# Translates a word
+trans() {
+ case "$1" in
+ -[dD]*)
+ translate -l de-en $2
+ ;;
+ -[eE]*)
+ translate -l en-de $2
+ ;;
+ *)
+ echo "Usage: $0 { -D | -E }"
+ echo " -D == German to English"
+ echo " -E == English to German"
+ esac
+}
+
+# Some quick Perl-hacks aka /useful/ oneliner
+# bew() { perl -le 'print unpack "B*","'$1'"' }
+# web() { perl -le 'print pack "B*","'$1'"' }
+# hew() { perl -le 'print unpack "H*","'$1'"' }
+# weh() { perl -le 'print pack "H*","'$1'"' }
+# pversion() { perl -M$1 -le "print $1->VERSION" } # i. e."pversion LWP -> 5.79"
+# getlinks () { perl -ne 'while ( m/"((www|ftp|http):\/\/.*?)"/gc ) { print $1, "\n"; }' $* }
+# gethrefs () { perl -ne 'while ( m/href="([^"]*)"/gc ) { print $1, "\n"; }' $* }
+# getanames () { perl -ne 'while ( m/a name="([^"]*)"/gc ) { print $1, "\n"; }' $* }
+# getforms () { perl -ne 'while ( m:(\</?(input|form|select|option).*?\>):gic ) { print $1, "\n"; }' $* }
+# getstrings () { perl -ne 'while ( m/"(.*?)"/gc ) { print $1, "\n"; }' $*}
+# getanchors () { perl -ne 'while ( m/«([^«»\n]+)»/gc ) { print $1, "\n"; }' $* }
+# showINC () { perl -e 'for (@INC) { printf "%d %s\n", $i++, $_ }' }
+# vimpm () { vim `perldoc -l $1 | sed -e 's/pod$/pm/'` }
+# vimhelp () { vim -c "help $1" -c on -c "au! VimEnter *" }
+
+#f5# List all occurrences of programm in current PATH
+plap() {
+ if [[ $# = 0 ]] ; then
+ echo "Usage: $0 program"
+ echo "Example: $0 zsh"
+ echo "Lists all occurrences of program in the current PATH."
+ else
+ ls -l ${^path}/*$1*(*N)
+ fi
+}
+
+# Found in the mailinglistarchive from Zsh (IIRC ~1996)
+#f5# Select items for specific command(s) from history
+selhist() {
+ emulate -L zsh
+ local TAB=$'\t';
+ (( $# < 1 )) && {
+ echo "Usage: $0 command"
+ return 1
+ };
+ cmd=(${(f)"$(grep -w $1 $HISTFILE | sort | uniq | pr -tn)"})
+ print -l $cmd | less -F
+ echo -n "enter number of desired command [1 - $(( ${#cmd[@]} - 1 ))]: "
+ local answer
+ read answer
+ print -z "${cmd[$answer]#*$TAB}"
+}
+
+# Use vim to convert plaintext to HTML
+#f5# Transform files to html with highlighting
+2html() { vim -u NONE -n -c ':syntax on' -c ':so $VIMRUNTIME/syntax/2html.vim' -c ':wqa' $1 &>/dev/null }
+
+# Usage: simple-extract <file>
+#f5# Smart archive extractor
+simple-extract () {
+ if [[ -f $1 ]] ; then
+ case $1 in
+ *.tar.bz2) bzip2 -v -d $1 ;;
+ *.tar.gz) tar -xvzf $1 ;;
+ *.rar) unrar $1 ;;
+ *.deb) ar -x $1 ;;
+ *.bz2) bzip2 -d $1 ;;
+ *.lzh) lha x $1 ;;
+ *.gz) gunzip -d $1 ;;
+ *.tar) tar -xvf $1 ;;
+ *.tgz) gunzip -d $1 ;;
+ *.tbz2) tar -jxvf $1 ;;
+ *.zip) unzip $1 ;;
+ *.Z) uncompress $1 ;;
+ *) echo "'$1' Error. Please go away" ;;
+ esac
+ else
+ echo "'$1' is not a valid file"
+ fi
+}
+
+# Usage: smartcompress <file> (<type>)
+#f5# Smart archive creator
+smartcompress() {
+ if [[ -n $2 ]] ; then
+ case $2 in
+ tgz | tar.gz) tar -zcvf$1.$2 $1 ;;
+ tbz2 | tar.bz2) tar -jcvf$1.$2 $1 ;;
+ tar.Z) tar -Zcvf$1.$2 $1 ;;
+ tar) tar -cvf$1.$2 $1 ;;
+ gz | gzip) gzip $1 ;;
+ bz2 | bzip2) bzip2 $1 ;;
+ *)
+ echo "Error: $2 is not a valid compression type"
+ ;;
+ esac
+ else
+ smartcompress $1 tar.gz
+ fi
+}
+
+# Usage: show-archive <archive>
+#f5# List an archive's content
+show-archive() {
+ if [[ -f $1 ]] ; then
+ case $1 in
+ *.tar.gz) gunzip -c $1 | tar -tf - -- ;;
+ *.tar) tar -tf $1 ;;
+ *.tgz) tar -ztf $1 ;;
+ *.zip) unzip -l $1 ;;
+ *.bz2) bzless $1 ;;
+ *.deb) dpkg-deb --fsys-tarfile $1 | tar -tf - -- ;;
+ *) echo "'$1' Error. Please go away" ;;
+ esac
+ else
+ echo "'$1' is not a valid archive"
+ fi
+}
+
+# It's shameless stolen from <http://www.vim.org/tips/tip.php?tip_id=167>
+#f5# Use \kbd{vim} as your manpage reader
+vman() { man $* | col -b | view -c 'set ft=man nomod nolist' - }
+
+# function readme() { $PAGER -- (#ia3)readme* }
+#f5# View all README-like files in current directory in pager
+readme() {
+ local files
+ files=(./(#i)*(read*me|lue*m(in|)ut)*(ND))
+ if (($#files)) ; then
+ $PAGER $files
+ else
+ print 'No README files.'
+ fi
+}
+
+# function ansi-colors()
+#f5# Display ANSI colors
+ansi-colors() {
+ typeset esc="\033[" line1 line2
+ echo " _ _ _40 _ _ _41_ _ _ _42 _ _ 43_ _ _ 44_ _ _45 _ _ _ 46_ _ _ 47_ _ _ 49_ _"
+ for fore in 30 31 32 33 34 35 36 37; do
+ line1="$fore "
+ line2=" "
+ for back in 40 41 42 43 44 45 46 47 49; do
+ line1="${line1}${esc}${back};${fore}m Normal ${esc}0m"
+ line2="${line2}${esc}${back};${fore};1m Bold ${esc}0m"
+ done
+ echo -e "$line1\n$line2"
+ done
+}
+
+# suidfind() { ls -latg $path | grep '^...s' }
+#f5# Find all files in \$PATH with setuid bit set
+suidfind() { ls -latg $path/*(sN) }
+
+# See above but this is /better/ ... anywise ..
+findsuid() {
+ print 'Output will be written to ~/suid_* ...'
+ $SUDO find / -type f \( -perm -4000 -o -perm -2000 \) -ls > ~/suid_suidfiles.`date "+%Y-%m-%d"`.out 2>&1
+ $SUDO find / -type d \( -perm -4000 -o -perm -2000 \) -ls > ~/suid_suiddirs.`date "+%Y-%m-%d"`.out 2>&1
+ $SUDO find / -type f \( -perm -2 -o -perm -20 \) -ls > ~/suid_writefiles.`date "+%Y-%m-%d"`.out 2>&1
+ $SUDO find / -type d \( -perm -2 -o -perm -20 \) -ls > ~/suid_writedirs.`date "+%Y-%m-%d"`.out 2>&1
+ print 'Finished'
+}
+
+#f5# Reload given functions
+refunc() {
+ for func in $argv ; do
+ unfunction $func
+ autoload $func
+ done
+}
+
+# a small check to see which DIR is located on which server/partition.
+# stolen and modified from Sven's zshrc.forall
+#f5# Report diskusage of a directory
+dirspace() {
+ if [[ -n "$1" ]] ; then
+ for dir in $* ; do
+ if [[ -d "$dir" ]] ; then
+ ( cd $dir; echo "-<$dir>"; du -shx .; echo);
+ else
+ echo "warning: $dir does not exist" >&2
+ fi
+ done
+ else
+ for dir in $path; do
+ if [[ -d "$dir" ]] ; then
+ ( cd $dir; echo "-<$dir>"; du -shx .; echo);
+ else
+ echo "warning: $dir does not exist" >&2
+ fi
+ done
+ fi
+}
+
+# % slow_print `cat /etc/passwd`
+#f5# Slowly print out parameters
+slow_print() {
+ for argument in "${@}" ; do
+ for ((i = 1; i <= ${#1} ;i++)) ; do
+ print -n "${argument[i]}"
+ sleep 0.08
+ done
+ print -n " "
+ done
+ print ""
+}
+
+#f5# Show some status info
+status() {
+ print ""
+ print "Date..: "$(date "+%Y-%m-%d %H:%M:%S")""
+ print "Shell.: Zsh $ZSH_VERSION (PID = $$, $SHLVL nests)"
+ print "Term..: $TTY ($TERM), $BAUD bauds, $COLUMNS x $LINES cars"
+ print "Login.: $LOGNAME (UID = $EUID) on $HOST"
+ print "System: $(cat /etc/[A-Za-z]*[_-][rv]e[lr]*)"
+ print "Uptime:$(uptime)"
+ print ""
+}
+
+# Rip an audio CD
+#f5# Rip an audio CD
+audiorip() {
+ mkdir -p ~/ripps
+ cd ~/ripps
+ cdrdao read-cd --device $DEVICE --driver generic-mmc audiocd.toc
+ cdrdao read-cddb --device $DEVICE --driver generic-mmc audiocd.toc
+ echo " * Would you like to burn the cd now? (yes/no)"
+ read input
+ if [[ "$input" = "yes" ]] ; then
+ echo " ! Burning Audio CD"
+ audioburn
+ echo " * done."
+ else
+ echo " ! Invalid response."
+ fi
+}
+
+# and burn it
+#f5# Burn an audio CD (in combination with audiorip)
+audioburn() {
+ cd ~/ripps
+ cdrdao write --device $DEVICE --driver generic-mmc audiocd.toc
+ echo " * Should I remove the temporary files? (yes/no)"
+ read input
+ if [[ "$input" = "yes" ]] ; then
+ echo " ! Removing Temporary Files."
+ cd ~
+ rm -rf ~/ripps
+ echo " * done."
+ else
+ echo " ! Invalid response."
+ fi
+}
+
+#f5# Make an audio CD from all mp3 files
+mkaudiocd() {
+ # TODO: do the renaming more zshish, possibly with zmv()
+ cd ~/ripps
+ for i in *.[Mm][Pp]3; do mv "$i" `echo $i | tr '[A-Z]' '[a-z]'`; done
+ for i in *.mp3; do mv "$i" `echo $i | tr ' ' '_'`; done
+ for i in *.mp3; do mpg123 -w `basename $i .mp3`.wav $i; done
+ normalize -m *.wav
+ for i in *.wav; do sox $i.wav -r 44100 $i.wav resample; done
+}
+
+#f5# Create an ISO image. You are prompted for\\&\quad volume name, filename and directory
+mkiso() {
+ echo " * Volume name "
+ read volume
+ echo " * ISO Name (ie. tmp.iso)"
+ read iso
+ echo " * Directory or File"
+ read files
+ mkisofs -o ~/$iso -A $volume -allow-multidot -J -R -iso-level 3 -V $volume -R $files
+}
+
+#f5# Simple thumbnails generator
+genthumbs() {
+ rm -rf thumb-* index.html
+ echo "
+<html>
+ <head>
+ <title>Images</title>
+ </head>
+ <body>" > index.html
+ for f in *.(gif|jpeg|jpg|png) ; do
+ convert -size 100x200 "$f" -resize 100x200 thumb-"$f"
+ echo " <a href=\"$f\"><img src=\"thumb-$f\"></a>" >> index.html
+ done
+ echo "
+ </body>
+</html>" >> index.html
+}
+
+#f5# Set all ulimit parameters to \kbd{unlimited}
+allulimit() {
+ ulimit -c unlimited
+ ulimit -d unlimited
+ ulimit -f unlimited
+ ulimit -l unlimited
+ ulimit -n unlimited
+ ulimit -s unlimited
+ ulimit -t unlimited
+}
+
+# ogg2mp3 with bitrate of 192
+ogg2mp3_192() {
+ oggdec -o - ${1} | lame -b 192 - ${1:r}.mp3
+}
+
+#f5# RFC 2396 URL encoding in Z-Shell
+urlencode() {
+ setopt localoptions extendedglob
+ input=( ${(s::)1} )
+ print ${(j::)input/(#b)([^A-Za-z0-9_.!~*\'\(\)-])/%${(l:2::0:)$(([##16]#match))}}
+}
+
+#f5# Install x-lite (VoIP software)
+getxlite() {
+ setopt local_options
+ setopt errreturn
+ [[ -d ~/tmp ]] || mkdir ~/tmp
+ cd ~/tmp
+
+ echo "Downloading http://www.counterpath.com/download/X-Lite_Install.tar.gz and storing it in ~/tmp:"
+ if wget http://www.counterpath.com/download/X-Lite_Install.tar.gz ; then
+ unp X-Lite_Install.tar.gz && echo done || echo failed
+ else
+ echo "Error while downloading." ; return 1
+ fi
+
+ if [[ -x xten-xlite/xtensoftphone ]] ; then
+ echo "Execute xten-xlite/xtensoftphone to start xlite."
+ fi
+}
+
+#f5# Install skype
+getskype() {
+ setopt local_options
+ setopt errreturn
+ echo "Downloading debian package of skype."
+ echo "Notice: If you want to use a more recent skype version run 'getskypebeta'."
+ wget http://www.skype.com/go/getskype-linux-deb
+ $SUDO dpkg -i skype*.deb && echo "skype installed."
+}
+
+#f5# Install beta-version of skype
+getskypebeta() {
+ setopt local_options
+ setopt errreturn
+ echo "Downloading debian package of skype (beta version)."
+ wget http://www.skype.com/go/getskype-linux-beta-deb
+ $SUDO dpkg -i skype-beta*.deb && echo "skype installed."
+}
+
+#f5# Install gizmo (VoIP software)
+getgizmo() {
+ setopt local_options
+ setopt errreturn
+ echo "libgtk2.0-0, gconf2, libstdc++6, libasound2 and zlib1g have to be available. Installing."
+ $SUDO apt-get update
+ $SUDO apt-get install libgtk2.0-0 gconf2 libstdc++6 libasound2 zlib1g
+ wget "$(lynx --dump http://gizmo5.com/pc/download/linux/ | awk '/libstdc\+\+6.*\.deb/ {print $2}')"
+ $SUDO dpkg -i gizmo-project*.deb && echo "gizmo installed."
+}
+
+#f5# Get and run AIR (Automated Image and Restore)
+getair() {
+ setopt local_options
+ setopt errreturn
+ [[ -w . ]] || { echo 'Error: you do not have write permissions in this directory. Exiting.' ; return 1 }
+ local VER='1.2.8'
+ wget http://puzzle.dl.sourceforge.net/sourceforge/air-imager/air-$VER.tar.gz
+ tar zxf air-$VER.tar.gz
+ cd air-$VER
+ INTERACTIVE=no $SUDO ./install-air-1.2.8
+ [[ -x /usr/local/bin/air ]] && [[ -n "$DISPLAY" ]] && $SUDO air
+}
+
+#f5# Get specific git commitdiff
+git-get-diff() {
+ if [[ -z $GITTREE ]] ; then
+ GITTREE='linux/kernel/git/torvalds/linux-2.6.git'
+ fi
+ if ! [[ -z $1 ]] ; then
+ ${=BROWSER} "http://kernel.org/git/?p=$GITTREE;a=commitdiff;h=$1"
+ else
+ echo "Usage: git-get-diff <commit>"
+ fi
+}
+
+#f5# Get specific git commit
+git-get-commit() {
+ if [[ -z $GITTREE ]] ; then
+ GITTREE='linux/kernel/git/torvalds/linux-2.6.git'
+ fi
+ if ! [[ -z $1 ]] ; then
+ ${=BROWSER} "http://kernel.org/git/?p=$GITTREE;a=commit;h=$1"
+ else
+ echo "Usage: git-get-commit <commit>"
+ fi
+}
+
+#f5# Get specific git diff
+git-get-plaindiff () {
+ if [[ -z $GITTREE ]] ; then
+ GITTREE='linux/kernel/git/torvalds/linux-2.6.git'
+ fi
+ if [[ -z $1 ]] ; then
+ echo 'Usage: git-get-plaindiff '
+ else
+ echo -n "Downloading $1.diff ... "
+ # avoid "generating ..." stuff from kernel.org server:
+ wget --quiet "http://kernel.org/git/?p=$GITTREE;a=commitdiff_plain;h=$1" -O /dev/null
+ wget --quiet "http://kernel.org/git/?p=$GITTREE;a=commitdiff_plain;h=$1" -O $1.diff \
+ && echo done || echo failed
+ fi
+}
+
+
+# http://strcat.de/blog/index.php?/archives/335-Software-sauber-deinstallieren...html
+#f5# Log 'make install' output
+mmake() {
+ [[ ! -d ~/.errorlogs ]] && mkdir ~/.errorlogs
+ make -n install > ~/.errorlogs/${PWD##*/}-makelog
+}
+
+#f5# Indent source code
+smart-indent() {
+ indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs $*
+}
+
+# highlight important stuff in diff output, usage example: hg diff | hidiff
+#m# a2 hidiff \kbd{histring} oneliner for diffs
+check_com -c histring && \
+ alias hidiff="histring -fE '^Comparing files .*|^diff .*' | histring -c yellow -fE '^\-.*' | histring -c green -fE '^\+.*'"
+
+# rename pictures based on information found in exif headers
+#f5# Rename pictures based on information found in exif headers
+exirename() {
+ if [[ $# -lt 1 ]] ; then
+ echo 'Usage: jpgrename $FILES' >& 2
+ return 1
+ else
+ echo -n 'Checking for jhead with version newer than 1.9: '
+ jhead_version=`jhead -h | grep 'used by most Digital Cameras. v.*' | awk '{print $6}' | tr -d v`
+ if [[ $jhead_version > '1.9' ]]; then
+ echo 'success - now running jhead.'
+ jhead -n%Y-%m-%d_%Hh%M_%f $*
+ else
+ echo 'failed - exiting.'
+ fi
+ fi
+}
+
+# open file in vim and jump to line
+# http://www.downgra.de/archives/2007/05/08/T19_21_11/
+j2v() {
+ local -a params
+ params=(${*//(#m):[0-9]*:/\\n+${MATCH//:/}}) # replace ':23:' to '\n+23'
+ params=(${(s|\n|)${(j|\n|)params}}) # join array using '\n', then split on all '\n'
+ vim ${params}
+}
+
+# get_ic() - queries imap servers for capabilities; real simple. no imaps
+ic_get() {
+ local port
+ if [[ ! -z $1 ]] ; then
+ port=${2:-143}
+ print "querying imap server on $1:${port}...\n";
+ print "a1 capability\na2 logout\n" | nc $1 ${port}
+ else
+ print "usage:\n $0 <imap-server> [port]"
+ fi
+}
+
+# creates a Maildir/ with its {new,cur,tmp} subdirs
+mkmaildir() {
+ local root subdir
+ root=${MAILDIR_ROOT:-${HOME}/Mail}
+ if [[ -z ${1} ]] ; then print "Usage:\n $0 <dirname>" ; return 1 ; fi
+ subdir=${1}
+ mkdir -p ${root}/${subdir}/{cur,new,tmp}
+}
+
+# xtrename() rename xterm from within GNU-screen
+xtrename() {
+ if [[ -z ${DISPLAY} ]] ; then
+ printf 'xtrename only makes sense in X11.\n'
+ return 1
+ fi
+ if [[ -z ${1} ]] ; then
+ printf 'usage: xtrename() "title for xterm"\n'
+ printf ' renames the title of xterm from _within_ screen.\n'
+ printf ' Also works without screen.\n'
+ return 0
+ fi
+ print -n "\eP\e]0;${1}\C-G\e\\"
+ return 0
+}
+
+# hl() highlighted less
+# http://ft.bewatermyfriend.org/comp/data/zsh/zfunct.html
+if check_com -c highlight ; then
+ function hl() {
+ local theme lang
+ theme=${HL_THEME:-""}
+ case ${1} in
+ (-l|--list)
+ ( printf 'available languages (syntax parameter):\n\n' ;
+ highlight --list-langs ; ) | less -SMr
+ ;;
+ (-t|--themes)
+ ( printf 'available themes (style parameter):\n\n' ;
+ highlight --list-themes ; ) | less -SMr
+ ;;
+ (-h|--help)
+ printf 'usage: hl <syntax[:theme]> <file>\n'
+ printf ' available options: --list (-l), --themes (-t), --help (-h)\n\n'
+ printf ' Example: hl c main.c\n'
+ ;;
+ (*)
+ if [[ -z ${2} ]] || (( ${#argv} > 2 )) ; then
+ printf 'usage: hl <syntax[:theme]> <file>\n'
+ printf ' available options: --list (-l), --themes (-t), --help (-h)\n'
+ (( ${#argv} > 2 )) && printf ' Too many arguments.\n'
+ return 1
+ fi
+ lang=${1%:*}
+ [[ ${1} == *:* ]] && [[ -n ${1#*:} ]] && theme=${1#*:}
+ if [[ -n ${theme} ]] ; then
+ highlight --xterm256 --syntax ${lang} --style ${theme} ${2} | less -SMr
+ else
+ highlight --ansi --syntax ${lang} ${2} | less -SMr
+ fi
+ ;;
+ esac
+ return 0
+ }
+ # ... and a proper completion for hl()
+ # needs 'highlight' as well, so it fits fine in here.
+ function _hl_genarg() {
+ local expl
+ if [[ -prefix 1 *: ]] ; then
+ local themes
+ themes=(${${${(f)"$(LC_ALL=C highlight --list-themes)"}/ #/}:#*(Installed|Use name)*})
+ compset -P 1 '*:'
+ _wanted -C list themes expl theme compadd ${themes}
+ else
+ local langs
+ langs=(${${${(f)"$(LC_ALL=C highlight --list-langs)"}/ #/}:#*(Installed|Use name)*})
+ _wanted -C list languages expl languages compadd -S ':' -q ${langs}
+ fi
+ }
+ function _hl_complete() {
+ _arguments -s '1: :_hl_genarg' '2:files:_path_files'
+ }
+ compdef _hl_complete hl
+fi
+
+# create small urls via tinyurl.com using wget, grep and sed
+zurl() {
+ [[ -z ${1} ]] && print "please give an url to shrink." && return 1
+ local url=${1}
+ local tiny="http://tinyurl.com/create.php?url="
+ #print "${tiny}${url}" ; return
+ wget -O- \
+ -o/dev/null \
+ "${tiny}${url}" \
+ | grep -Eio 'value="(http://tinyurl.com/.*)"' \
+ | sed 's/value=//;s/"//g'
+}
+
+#f2# Print a specific line of file(s).
+linenr () {
+# {{{
+ if [ $# -lt 2 ] ; then
+ print "Usage: linenr <number>[,<number>] <file>" ; return 1
+ elif [ $# -eq 2 ] ; then
+ local number=$1
+ local file=$2
+ command ed -s $file <<< "${number}n"
+ else
+ local number=$1
+ shift
+ for file in "$@" ; do
+ if [ ! -d $file ] ; then
+ echo "${file}:"
+ command ed -s $file <<< "${number}n" 2> /dev/null
+ else
+ continue
+ fi
+ done | less
+ fi
+# }}}
+}
+
+#f2# Find history events by search pattern and list them by date.
+whatwhen() {
+# {{{
+ local usage help ident format_l format_s first_char remain first last
+ usage='USAGE: whatwhen [options] <searchstring> <search range>'
+ help='Use' \`'whatwhen -h'\'' for further explanations.'
+ ident=${(l,${#${:-Usage: }},, ,)}
+ format_l="${ident}%s\t\t\t%s\n"
+ format_s="${format_l//(\\t)##/\\t}"
+ # Make the first char of the word to search for case
+ # insensitive; e.g. [aA]
+ first_char=[${(L)1[1]}${(U)1[1]}]
+ remain=${1[2,-1]}
+ # Default search range is `-100'.
+ first=${2:-\-100}
+ # Optional, just used for `<first> <last>' given.
+ last=$3
+ case $1 in
+ ("")
+ printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
+ printf '%s\n%s\n\n' ${usage} ${help} && return 1
+ ;;
+ (-h)
+ printf '%s\n\n' ${usage}
+ print 'OPTIONS:'
+ printf $format_l '-h' 'show help text'
+ print '\f'
+ print 'SEARCH RANGE:'
+ printf $format_l "'0'" 'the whole history,'
+ printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
+ printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
+ printf '\n%s\n' 'EXAMPLES:'
+ printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
+ printf $format_l 'whatwhen zsh -250'
+ printf $format_l 'whatwhen foo 1 99'
+ ;;
+ (\?)
+ printf '%s\n%s\n\n' ${usage} ${help} && return 1
+ ;;
+ (*)
+ # -l list results on stout rather than invoking $EDITOR.
+ # -i Print dates as in YYYY-MM-DD.
+ # -m Search for a - quoted - pattern within the history.
+ fc -li -m "*${first_char}${remain}*" $first $last
+ ;;
+ esac
+# }}}
+}
+
+# change fluxbox keys from 'Alt-#' to 'Alt-F#' and vice versa
+fluxkey-change() {
+ [[ -n "$FLUXKEYS" ]] || local FLUXKEYS="$HOME/.fluxbox/keys"
+ if ! [[ -r "$FLUXKEYS" ]] ; then
+ echo "Sorry, \$FLUXKEYS file $FLUXKEYS could not be read - nothing to be done."
+ return 1
+ else
+ if grep -q 'Mod1 F[0-9] :Workspace [0-9]' $FLUXKEYS ; then
+ echo -n 'Switching to Alt-# mode in ~/.fluxbox/keys: '
+ sed -i -e 's|^\(Mod[0-9]\+[: space :]\+\)F\([0-9]\+[: space :]\+:Workspace.*\)|\1\2|' $FLUXKEYS && echo done || echo failed
+ elif grep -q 'Mod1 [0-9] :Workspace [0-9]' $FLUXKEYS ; then
+ echo -n 'Switching to Alt-F# mode in ~/.fluxbox/keys: '
+ sed -i -e 's|^\(Mod[0-9]\+[: space :]\+\)\([0-9]\+[: space :]\+:Workspace.*\)|\1F\2|' $FLUXKEYS && echo done || echo failed
+ else
+ echo 'Sorry, do not know what to do.'
+ return 1
+ fi
+ fi
+}
+
+# retrieve weather information on the console
+# Usage example: 'weather LOWG'
+weather() {
+ [[ -n "$1" ]] || {
+ print 'Usage: weather <station_id>' >&2
+ print 'List of stations: http://en.wikipedia.org/wiki/List_of_airports_by_ICAO_code'>&2
+ return 1
+ }
+
+ local PLACE="${1:u}"
+ local FILE="$HOME/.weather/$PLACE"
+ local LOG="$HOME/.weather/log"
+
+ [[ -d $HOME/.weather ]] || {
+ print -n "Creating $HOME/.weather: "
+ mkdir $HOME/.weather
+ print 'done'
+ }
+
+ print "Retrieving information for ${PLACE}:"
+ print
+ wget -T 10 --no-verbose --output-file=$LOG --output-document=$FILE --timestamping http://weather.noaa.gov/pub/data/observations/metar/decoded/$PLACE.TXT
+
+ if [[ $? -eq 0 ]] ; then
+ if [[ -n "$VERBOSE" ]] ; then
+ cat $FILE
+ else
+ DATE=$(grep 'UTC' $FILE | sed 's#.* /##')
+ TEMPERATURE=$(awk '/Temperature/ { print $4" degree Celcius / " $2" degree Fahrenheit" }' $FILE| tr -d '(')
+ echo "date: $DATE"
+ echo "temp: $TEMPERATURE"
+ fi
+ else
+ print "There was an error retrieving the weather information for $PLACE" >&2
+ cat $LOG
+ return 1
+ fi
+}
+# }}}
+
+# mercurial related stuff {{{
+if check_com -c hg ; then
+ # gnu like diff for mercurial
+ # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
+ #f5# GNU like diff for mercurial
+ hgdi() {
+ for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
+ }
+
+ # build debian package
+ #a2# Alias for \kbd{hg-buildpackage}
+ alias hbp='hg-buildpackage'
+
+ # execute commands on the versioned patch-queue from the current repos
+ alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
+
+ # diffstat for specific version of a mercurial repository
+ # hgstat => display diffstat between last revision and tip
+ # hgstat 1234 => display diffstat between revision 1234 and tip
+ #f5# Diffstat for specific version of a mercurial repos
+ hgstat() {
+ [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
+ }
+
+ #f5# Get current mercurial tip via hg itself
+ gethgclone() {
+ setopt local_options
+ setopt errreturn
+ if [[ -f mercurial-tree/.hg ]] ; then
+ cd mercurial-tree
+ echo "Running hg pull for retreiving latest version..."
+ hg pull
+ echo "Finished update. Building mercurial"
+ make local
+ echo "Setting \$PATH to $PWD:\$PATH..."
+ export PATH="$PWD:$PATH"
+ else
+ echo "Downloading mercurial via hg"
+ hg clone http://selenic.com/repo/hg mercurial-tree
+ cd mercurial-tree
+ echo "Building mercurial"
+ make local
+ echo "Setting \$PATH to $PWD:\$PATH..."
+ export PATH="$PWD:$PATH"
+ echo "make sure you set it permanent via ~/.zshrc if you plan to use it permanently."
+ # echo "Setting \$PYTHONPATH to PYTHONPATH=\${HOME}/lib/python,"
+ # export PYTHONPATH=${HOME}/lib/python
+ fi
+ }
+
+fi # end of check whether we have the 'hg'-executable
+
+# get current mercurial snapshot
+#f5# Get current mercurial snapshot
+gethgsnap() {
+ setopt local_options
+ setopt errreturn
+ if [[ -f mercurial-snapshot.tar.gz ]] ; then
+ echo "mercurial-snapshot.tar.gz exists already, skipping download."
+ else
+ echo "Downloading mercurial snapshot"
+ wget http://www.selenic.com/mercurial/mercurial-snapshot.tar.gz
+ fi
+ echo "Unpacking mercurial-snapshot.tar.gz"
+ tar zxf mercurial-snapshot.tar.gz
+ cd mercurial-snapshot/
+ echo "Installing required build-dependencies"
+ $SUDO apt-get update
+ $SUDO apt-get install python2.4-dev
+ echo "Building mercurial"
+ make local
+ echo "Setting \$PATH to $PWD:\$PATH..."
+ export PATH="$PWD:$PATH"
+ echo "make sure you set it permanent via ~/.zshrc if you plan to use it permanently."
+}
+# }}}
+
+# some useful commands often hard to remember - let's grep for them {{{
+
+# Work around ion/xterm resize bug.
+#if [[ "$SHLVL" -eq 1 ]]; then
+# if check_com -c resize ; then
+# eval `resize </dev/null`
+# fi
+#fi
+
+# enable jackd:
+# /usr/bin/jackd -dalsa -dhw:0 -r48000 -p1024 -n2
+# now play audio file:
+# alsaplayer -o jack foobar.mp3
+
+# send files via netcat
+# on sending side:
+# send() {j=$*; tar cpz ${j/%${!#}/}|nc -w 1 ${!#} 51330;}
+# send dir* $HOST
+# alias receive='nc -vlp 51330 | tar xzvp'
+
+# debian stuff:
+# dh_make -e foo@localhost -f $1
+# dpkg-buildpackage -rfakeroot
+# lintian *.deb
+# dpkg-scanpackages ./ /dev/null | gzip > Packages.gz
+# dpkg-scansources . | gzip > Sources.gz
+# grep-dctrl --field Maintainer $* /var/lib/apt/lists/*
+
+# other stuff:
+# convert -geometry 200x200 -interlace LINE -verbose
+# ldapsearch -x -b "OU=Bedienstete,O=tug" -h ldap.tugraz.at sn=$1
+# ps -ao user,pcpu,start,command
+# gpg --keyserver blackhole.pca.dfn.de --recv-keys
+# xterm -bg black -fg yellow -fn -misc-fixed-medium-r-normal--14-140-75-75-c-90-iso8859-15 -ah
+# nc -vz $1 1-1024 # portscan via netcat
+# wget --mirror --no-parent --convert-links
+# pal -d `date +%d`
+# autoload -U tetris; zle -N tetris; bindkey '...' ; echo "press ... for playing tennis"
+#
+# modify console cursor
+# see http://www.tldp.org/HOWTO/Framebuffer-HOWTO-5.html
+# print $'\e[?96;0;64c'
+# }}}
+
+# grml-small cleanups {{{
+
+# The following is used to remove zsh-config-items that do not work
+# in grml-small by default.
+# If you do not want these adjustments (for whatever reason), set
+# $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
+# sources if it is there).
+
+if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
+
+ unset abk[V]
+ unalias 'V' &> /dev/null
+ unfunction vman &> /dev/null
+ unfunction vimpm &> /dev/null
+ unfunction vimhelp &> /dev/null
+ unfunction viless &> /dev/null
+ unfunction 2html &> /dev/null
+
+ # manpages are not in grmlsmall
+ unfunction manzsh &> /dev/null
+ unalias man2 &> /dev/null
+ unalias man &> /dev/null
+ unfunction man2 &> /dev/null
+
+fi
+
+#}}}
+
+# finally source a local zshrc {{{
+
+# this allows us to stay in sync with grml's zshrc and put own
+# modifications in ~/.zshrc.local
+
+xsource "${HOME}/.zshrc.local"
+
+# }}}
+
+### doc strings for external functions from files {{{
+#m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
+#}}}
+
## END OF FILE #################################################################
# vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4
projects / grml-etc-core.git / commitdiff