+cat >> /etc/xen/xend-config.sxp << EOF
+(network-script network-route)
+(vif-bridge xenintbr)
+(vif-script vif-bridge)
+EOF
+
+List domains, start up a DomU, shutdown later again:
+
+xm create -c /etc/xen/xengrml1.cfg
+xm list
+xm shutdown 1
+
+This HowTo is also available online at http://grml.org/xen/
+--
+Play tetris with zsh:
+
+autoload -U tetris
+zle -N tetris
+bindkey "^Xt" tetris
+
+Now press 'ctrl-x t'.
+--
+Set up a router with grml
+
+Run grml-router script:
+# grml-router
+
+Install dnsmasq if not already present:
+# apt-get update ; apt-get install dnsmasq
+
+Adjust /etc/dnsmasq.conf according to your needs:
+# cat >> /etc/dnsmasq.conf << EOF
+domain-needed
+bogus-priv
+dhcp-range=19.168.0.124,192.168.0.254,1m # dhcp range
+dhcp-option=3,192.168.0.1 # dns server
+dhcp-option=1,255.255.255.0 # netmask
+EOF
+
+Start dnsmasq finally:
+# Restart dnsmasq
+--
+Find out which process(es) cause the disk to spin up:
+
+# echo 1 > /proc/sys/vm/block_dump
+
+The command sets a sysctl to cause the kernel to log all disk
+writes. Please notice that there is a lot of data.
+
+See: $KERNEL-SOURCE/Documentation/laptop-mode.txt
+
+Also take a look at event-viewer(8).
+--
+Display stats about memory allocations performed by a program:
+
+Usage example for 'ls':
+
+% LD_PRELOAD=/lib/libmemusage.so ls > /dev/null
+--
+Use KVM (Kernel-based Virtual Machine for Linux):
+
+Make sure to install the relevant tools:
+# apt-get update ; apt-get install kvm
+# modprobe kvm
+
+Test it with a minimal system like ttylinux:
+# wget http://www.minimalinux.org/ttylinux/packages/bootcd-i386-5.3.iso.gz
+# gzip -d bootcd-i386-5.3.iso.gz
+# kvm -cdrom bootcd-i386-5.3.iso
+--
+EEPROM data decoding for SDRAM DIMM modules:
+
+# modprobe eeprom
+# /usr/share/doc/lm-sensors/examples/eeprom/decode-dimms.pl
+--
+Set up and use DVB:
+
+Make sure your device is supported by Linux and running.
+See http://www.linuxtv.org/ for more details.
+
+If the DVB device works on your system (see 'hwinfo --usb'
+when using a DVB usb device for example), then make sure you
+have the scan util from dvb-utils available:
+
+# aptitude install dvb-utils
+
+Then create a channels.conf configuration file:
+
+% scan /usr/share/doc/dvb-utils/examples/scan/... > ~/.mplayer/channels.conf
+
+You can find some example configuration files on
+your grml system in ~/.channels. Usage example:
+
+% ln -s ~/.mplayer/channels.conf-AT-graz ~/.mplayer/channels.conf
+
+Tip: w_scan (see http://free.pages.at/wirbel4vdr/w_scan/index2.html)
+might be useful if you do not know the initial configuration
+details.
+--