# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Mit Apr 04 16:26:39 CEST 2007 [mika]
################################################################################
+# make sure /tmp is writeable {{{
+ if ! [ -w /tmp ] ; then
+ echo 'Fatal: /tmp is not writeable. Can not resume therefore, sorry.' >&2
+ exit 1
+ fi
+# }}}
+
# debugging {{{
# usage: DEBUG=1 grml-x ..... 2>/tmp/grml-x-debug.log
if [[ $DEBUG -gt 0 ]]; then
Usage: $PROGRAMNAME
$PROGRAMNAME [-options] windowmanager
-Examples:
+Usage examples:
$PROGRAMNAME wmii
- $PROGRAMNAME pekwm
$PROGRAMNAME fluxbox
+ $PROGRAMNAME openbox
$PROGRAMNAME -force -nostart fluxbox
$PROGRAMNAME -nosynaptics fluxbox
$PROGRAMNAME -nosync fluxbox
$PROGRAMNAME -noddc wmii
- $PROGRAMNAME -module radeon -mode 1024x768 -vsync 60 wmi
- XINITRC=~/.xinitrc $PROGRAMNAME ion
- $PROGRAMNAME -display 8 wmii
+ $PROGRAMNAME -xinerama -composite wmii
+ $PROGRAMNAME -module radeon -mode 1024x768 -vsync 60 openbox
+ XINITRC=~/.xinitrc $PROGRAMNAME openbox
+ $PROGRAMNAME -display 8 openbox
More information on grml-x can be found in the manual page: man grml-x
[ -r "$MONITORINFO" ] || monitor # get monitor settings
modes=$(perl -e 'while (<STDIN>) {if (/ Resolution:/) { s/.*\s+(\d+x\d+).*/$1/; print} }' < $MONITORINFO |
sort -nur | perl -ne 's/\s+/ /; s/(\d+x\d+)/"$1"/; print')
+
+ if [ -n "$XINERAMA" ] ; then
+
+ print "$fg[green]
+
+Option for $fg[yellow]Xinerama$fg[green] found, please use xrandr inside X.org for your further configuration!
+Trying to identify monitors now..."
+
+ # make sure we have information from 2 monitors:
+ # - first one from 'hwinfo --monitor' => $MONITORINFO
+ # - second one from 'hwinfo --framebuffer' => $FRAMEBUFFER
+ FRAMEBUFFER=$(hwinfo --framebuffer | grep 'Mode 0x.* bits' | head -1)
+ if [ -z "$FRAMEBUFFER" ] ; then
+ print "$fg[red]
+Fatal: could not identify two monitors - no chance to
+ set up multihead using Xinerama - sorry. :-(
+
+Please run grml-x without the -xinerama option to start
+X anyway (dropping support for Xinerama of course) and
+contact grml developers if you have any further useful
+information. => http://grml.org/bugs/
+"
+ bailout 10
+ fi
+
+ # check whether we can read the $MONITORINFO file
+ if ! [ -r "$MONITORINFO" ] ; then
+ print "$fg[red]
+Fatal: could not identify monitor - no chance to
+ set up multihead using Xinerama - sorry. :-(
+"
+ bailout 11
+ else
+ # Currently we only know that it works with current intel driver,
+ # so inform user about that:
+ if [[ "$MODULE" != "intel" ]] ; then
+ print "$fg[red]
+
+Warning: using a non-intel driver - trying Xinerama setup anyway.
+If it worked please contact grml developers providing information
+about your setup so we can adjust grml-x according!
+
+ -> http://grml.org/contact/
+
+Sleeping for 10 seconds now... Will continue then...
+Just press Ctrl-C to cancel operation.
+"
+ sleep 10
+ fi
+
+ # now calculate Virtual size for use with Xinerama
+ HORIZ_RES1="$(grep 'Max. Resolution:' $MONITORINFO | sed 's/ Max\. Resolution: \(.*\)x\(.*\)/\1/')"
+ VERIZ_RES1="$(grep 'Max. Resolution:' $MONITORINFO | sed 's/ Max\. Resolution: \(.*\)x\(.*\)/\2/')"
+ # it might happen that we don't have a Max Resolution in hwinfo output :-/
+ # fall back to a generic value then...
+ # TODO: check out how to get resolution of external monitor from console
+ if [ -z "$HORIZ_RES1" ] ; then
+ HORIZ_RES1="1024"
+ VERIZ_RES1="768"
+ fi
+
+ # get maximum of output
+ HORIZ_RES2="$(echo $FRAMEBUFFER | grep 'Mode 0x' | sed 's/ Mode 0x.*: \(.*\)x.*/\1/'| sort -u | head -1)"
+ VERIZ_RES2="$(echo $FRAMEBUFFER | grep 'Mode 0x' | sed 's/ Mode 0x.*x\(.*\) (.*/\1/' | sort -u | head -1)"
+
+ if [ -n "$HORIZ_RES1" -a -n "$VERIZ_RES1" -a -n "$HORIZ_RES2" -a -n "$VERIZ_RES2" ] ; then
+ if [ "$(echo $VERIZ_RES1" - "$VERIZ_RES2 | bc -l)" -eq 0 ] ; then
+ VERIZ_RESULT="$VERIZ_RES1"
+ elif [ "$VERIZ_RES1" -gt "$VERIZ_RES2" ] ; then
+ VERIZ_RESULT="$VERIZ_RES1"
+ else
+ VERIZ_RESULT="$VERIZ_RES2"
+ fi
+
+ HORIZ_RESULT=$(echo $HORIZ_RES1 + $HORIZ_RES2 | bc -l)
+
+ # important: keep newline for appropriate placing below $MODES!
+ if [ -n "$HORIZ_RESULT" ] ; then
+ VIRTUAL="
+ Virtual $HORIZ_RESULT $VERIZ_RES1"
+ fi
+ fi
+ fi
+ fi
+
if [[ -n $NODDC ]] ; then
- MODES='Modes "1024x768" "800x600" "640x480" "1600x1200" "1280x1024" "1280x960"'
+ MODES="Modes \"1024x768\" \"800x600\" \"640x480\" \"1600x1200\" \"1280x1024\" \"1280x960\"$VIRTUAL"
elif [[ "$modes" == "\"1024x768\" " || -z $modes ]] ; then
- MODES='# Modes "1024x768" "800x600" "640x480" "1600x1200" "1280x1024" "1280x960"'
+ MODES="# Modes \"1024x768\" \"800x600\" \"640x480\" \"1600x1200\" \"1280x1024\" \"1280x960\"$VIRTUAL"
else
- MODES="# Modes $modes"
+ MODES="# Modes $modes$VIRTUAL"
fi
}
# }}}
sync()
{
[ -r "$MONITORINFO" ] || monitor # get monitor settings
+ [ -r "$MONITORINFO" ] || bailout 1
vsyncval=$(awk '/Vert. Sync Range:/{print $4}' $MONITORINFO | sed 's/-/.0 - / ; s/$/.0/' | head -1)
hsyncval=$(awk '/Hor. Sync Range:/{print $4}' $MONITORINFO | sed 's/-/.0 - / ; s/$/.0/' | head -1)
if [ -z $vsyncval ] ; then
if grep -q 'Device:.*Synaptics' "$MOUSEINFO" ; then
if [[ "$SYNAPTICS" == "yes" ]] ; then # check for '-nosynaptics'-option
MOUSEDRIVER='synaptics'
- SYNMOUSE='InputDevice "Synaptics" "AlwaysCore"'
+ SYNMOUSE='InputDevice "Synaptics" # "AlwaysCore"'
SYNMOUSEDETAIL="
Section \"InputDevice\"
Driver \"synaptics\"
if grep -q 'Device:.*ALPS' "$MOUSEINFO" ; then
if [[ "$SYNAPTICS" == "yes" ]] ; then # check for '-nosynaptics'-option
MOUSEDRIVER='synaptics'
- SYNMOUSE='InputDevice "Synaptics" "AlwaysCore"'
+ SYNMOUSE='InputDevice "Synaptics" # "AlwaysCore"'
SYNMOUSEDETAIL="
Section \"InputDevice\"
Driver \"synaptics\"
if grep -q 'Device:.*Serial' "$MOUSEINFO" ; then
SERIAL='yes'
SERMOUSE='InputDevice "Serial Mouse" "CorePointer"'
- SERMOUSEDETAIL="Section \"InputDevice\"
+ SERMOUSEDETAIL="
+Section \"InputDevice\"
Identifier \"Serial Mouse\"
Driver \"mouse\"
Option \"Device\" \"/dev/ttyS0\"
if [ -n "$USE_PS2" ] ; then
PS2='yes'
PS2MOUSE='InputDevice "PS/2 Mouse" "CorePointer"'
- PS2MOUSEDETAIL="Section \"InputDevice\"
+ PS2MOUSEDETAIL="
+Section \"InputDevice\"
Identifier \"PS/2 Mouse\"
Driver \"mouse\"
Option \"Device\" \"/dev/input/mice\"
PS2MOUSEDETAIL=''
fi
- EVDEV_MOUSE="# Section \"InputDevice\"
+ EVDEV_MOUSE="
+# Section \"InputDevice\"
# Identifier \"Generic Mouse\"
# Driver \"evdev\"
# Option \"Device\" \"/dev/input/mice\"
vsync:=o_vsync hsync:=o_hsync mode:=o_mode force=o_force display:=o_display \
nostart=o_nostart nodpms=o_nodpms nosynaptics=o_nosynaptics nousb=o_nousb \
nops2=o_nops2 genmouse=o_genmouse novref=o_novref nohsync=o_nohsync \
- fallback=o_fallback usb=o_usb ps2=o_ps2
+ fallback=o_fallback usb=o_usb ps2=o_ps2 composite=o_composite \
+ xinerama=o_xinerama
if [[ $# == 0 || "$o_help" != "" || "$1" == '-h' || "$1" == '--help' ]]; then
usage
VERTISYNC="# VertRefresh 50.0 - 60.0 # deactivated via -novref option of grml-x"
fi
+ if [[ "$o_xinerama" != "" ]]; then
+ XINERAMA=1
+ fi
+
+ if [[ "$o_composite" != "" ]]; then
+ COMPOSITE="Section \"Extensions\"
+ Option \"Composite\" \"Enable\"
+EndSection"
+ else
+ COMPOSITE="#Section \"Extensions\"
+# Option \"Composite\" \"Enable\"
+#EndSection"
+ fi
+
# write hwinfo stuff
writehwinfo
# monitor stuff
+ [ -r "$HWINFO_TMP" ] || bailout 1
MONITOR=$(awk '/monitor.1:/{print $3}' $HWINFO_TMP)
[[ $MONITOR != 'ddc' ]] && NODDC=yes
{
if ! [ -x $(which hwinfo) ] ; then
print "$bg[black]$fg[red]${bold_color}Error: hwinfo not found in path.${reset_color}
-Note: run 'apt-get install hwinfo' on systems running debian.
+Note: run 'aptitude install hwinfo' on systems running debian.
Exiting.${reset_color}"
exit -1
fi
# /usr/share/doc/xserver-xorg/ and
# http://wiki.x.org/wiki/Home and
# http://ftp.x.org/pub/X11R7.0/doc/html/index.html for information on Xorg
+#
# Refer to the xorg.conf man page and to
# http://ftp.x.org/pub/X11R7.0/doc/html/xorg.conf.5.html
# for details about the format of this file.
#
+# See http://wiki.debian.org/XStrikeForce/FAQ for information
+# regarding Xorg packages within Debian.
+#
# If you would like this file to be automatically reconfigured by debian,
# run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
-# Modules - see /usr/X11R6/lib/modules/fonts and /usr/X11R6/lib/modules/extensions
+# Modules - see /usr/lib/xorg/modules/fonts and /usr/lib/xorg/modules/extensions
Section "Module"
Load "dbe" # double buffer extension
Load "dri" # direct rendering
- Load "glx" # 3D layer
- Load "type1" # font module
- Load "freetype" # font rendering
+ Load "glx" # 3D layer / GLX extension
+ Load "type1" # type1 font module
+ Load "freetype" # freetype fonts rendering
Load "extmod" # some commonly used server extensions (e.g. shape extension)
Load "record" # recording extension
Load "evdev" # generic input handling driver on Linux
+ Load "xtrap" # X Trap extension
# Load "vbe" # Vesa BIOS Extension
- # Load "ddc" # ddc probing of monitor
- # Load "bitmap" # bitmap fonts
- # Load "GLcore" # render OpenGL in software
# Load "i2c" # I2C bus
# Load "int10" # initialize graphics cards via int10 call to the BIOS
- # Load "speedo" # font module
# Load "v4l" # Video for Linux
+ ## Deprecated/unneeded modules with Xorg >=7.0:
+ # Load "speedo" # font module (does not exist anymore)
+ # Load "ddc" # ddc probing of monitor (automatically loaded)
+ # Load "GLcore" # render OpenGL in software (automatically loaded)
+ # Load "bitmap" # bitmap fonts (automatically loaded)
# Valid entries - see /usr/lib/xorg/modules/[extensions/]
# afb bitmap cfb cfb16 cfb24 cfb32 cw damage dbe ddc dri drm extmod fb
# fbdevhw freetype GLcore glx i2c int10 int10 layer mfb pcidata rac ramdac
# EndSection
# More information: http://ftp.x.org/pub/X11R7.0/doc/html/mouse.html
-$USBMOUSEDETAIL
-$PS2MOUSEDETAIL
-$SERMOUSEDETAIL
-$SYNMOUSEDETAIL
-$EVDEV_MOUSE
+${USBMOUSEDETAIL}${PS2MOUSEDETAIL}${SERMOUSEDETAIL}${SYNMOUSEDETAIL}${EVDEV_MOUSE}
Section "Monitor"
Identifier "Monitor0"
# ModelName "Old Monitor (no DDC)"
Mode 0666
EndSection
-#Section "Extensions"
-# Option "Composite" "Enable"
-#EndSection
+$COMPOSITE
## END OF FILE #################################################################
EOX
function runit
{
writeconfig
+ if [ "$(readlink /etc/X11/X)" = /bin/true ] ; then
+ print "$bold_color$fg[red]Fatal: /etc/X11/X is a symlink to /bin/true."
+ print "Fix it via running 'ln -sf /usr/bin/Xorg /etc/X11/X'"
+ exit 10
+ fi
if [ -z "$NOSTART" ] ; then
print "$reset_color"
if [ -x /etc/init.d/xorg-common ] ; then
if [ -z "$DISPLAY" ] ; then
print "$bold_color$fg[green]Now trying to run startx.$reset_color"
startx $XINITRC -- $XOPTS
+ return 1
else
print "$bold_color$fg[green]Now trying to run startx on display $DISPLAY.$reset_color"
startx $XINITRC -- :$DISPLAY $XOPTS
+ return 1
fi
else
print "$bold_color$fg[blue]Not running startx as requested via option.$reset_color"
fi
- return 1
}
# }}}
get-edid | parse-edid
Do you want to go the debian way of life? Run:
- apt-get install x-window-system-core read-edid mdetect hwinfo xdebconfigurator
- dpkg-reconfigure x-window-system-core (or xserver-xorg depending on your system)
+ aptitude install xorg read-edid mdetect hwinfo xdebconfigurator
+ dpkg-reconfigure -phigh xserver-xorg
Problems with the module used for X? Try to load another one or
fall back to module vesa:
# xinitrc {{{
if ! [ -x "$(which $WINDOWMANAGER)" ] ; then
- print "$bg[black]$fg[red]${bold_color}Fatal: windowmanager $fg[blue]$WINDOWMANAGER$fg[red] not executable, startx won' work.${reset_color}">&2
+ print "$bg[black]$fg[red]${bold_color}Fatal: windowmanager $fg[blue]$WINDOWMANAGER$fg[red] not executable, startx will not work.${reset_color}">&2
bailout
fi
if [ -w "$XINITRC" ] ; then
# }}}
## END OF FILE #################################################################
-# vim:foldmethod=marker
+# vim:foldmethod=marker expandtab ai ft=zsh