--- /dev/null
+# Filename: /etc/grml/autoconfig
+# Purpose: configuration for grml-autoconfig
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Sam Sep 23 20:06:23 CEST 2006 [mika]
+################################################################################
+
+################################################################################
+# Notice: you can configure grml-autoconfig via adjusting the following values.
+# Set them to 'yes' to activate them. But please notice that some options
+# require an additional bootparam ("cheatcode") anyway, some options just
+# de-/activate a check!
+#
+# If you want to deactivate an option just set it to 'no'.
+#
+# Take a look at the script 'grml-autoconfig' as well!
+################################################################################
+
+## These are the options you might want to adjust: #############################
+
+# configure language - set keyboard layout
+# notice: overwriting this variable is still possible through
+# bootparameter lang=...
+# See http://grml.org/faq/#language for more information.
+# default: us
+# LANGUAGE='de'
+
+# console font
+# default: Lat15-Terminus16
+# CONSOLEFONT='iso15graf-16'
+
+# display information on running kernel
+CONFIG_KERNEL='yes'
+
+# check for network devices and run dhclient
+CONFIG_DHCP='yes'
+
+# check for frequency-scalable CPU and activate cpydyn/powernowd
+CONFIG_CPU='yes'
+
+# create /etc/fstab (this also de-/activates swap-partition)
+CONFIG_FSTAB='yes'
+
+# load ACPI/APM modules
+CONFIG_ACPI_APM='yes'
+
+# Enable DMA for all IDE drives - already done in initrd
+# but make sure it's done also on harddisk-installed systems
+CONFIG_DMA='yes'
+
+# set audio volumes
+CONFIG_MIXER='yes'
+
+# start syslog-ng
+CONFIG_SYSLOG='yes'
+
+# start gpm
+CONFIG_GPM='yes'
+
+################################################################################
+# Notice! Do not touch the following options except you really know
+# what you are doing!
+CONFIG_915RESOLUTION='yes' # run 915resolution with specified options for adjusting resolution
+CONFIG_AGP='yes' # check for bootparam forceagp
+CONFIG_AUTOMOUNTER='no' # activate automounter
+CONFIG_AUTOMOUNT='yes' # automounting of device labeled GRMLCFG
+CONFIG_BLANKING='yes' # check for bootoption noblank to disable console blanking
+CONFIG_BLINDSOUND='yes' # play 'beep' and play welcome message
+CONFIG_BLIND='yes' # check for blind option or brltty
+CONFIG_CDROM_PERM='yes' # for burning on IDE-CD-Roms, k3b (and others) check for special permissions
+CONFIG_CDROM_SCRIPTS='yes' # run scripts from /cdrom/scripts
+CONFIG_CONSOLE='yes' # activate mgetty when using console=... as bootparam
+CONFIG_CREATE_MNT_DIRS='no' # create /mnt-directories
+CONFIG_DEBNET='yes' # search for /etc/network/interfaces on partitions and set up network afterwards
+CONFIG_DEBUG='yes' # activate start of shells during startup at several stages
+CONFIG_DISCOVER='no' # use discover for hardware detection
+CONFIG_DISTCC='yes' # activate and setup distcc through bootparam distcc=$NETWORK,$INTERFACE
+CONFIG_EXTRACT='yes' # specify which (only in combination with bootparam myconfig/netconfig useful)
+CONFIG_FAST='yes' # skip startup of w3m on tty1
+CONFIG_FIREWIRE_DEV='no' # bugfix for kernel >=2.6.11 - create some firewire-devices
+CONFIG_FIX_PASSWD='yes' # fix unionfs-problem with passwd
+CONFIG_FIX_UNIONFS='yes' # fix/workaround for unionfs
+CONFIG_USERFSTAB='yes' # check for username of uid 1000
+CONFIG_FWTIMEOUT='yes' # set timeout for firmware loading
+CONFIG_GRML2HD='yes' # check for 'grml2hd' bootoption
+CONFIG_HOMEDIR='yes' # check for persistent homedir option
+CONFIG_HOSTNAME='yes' # set hostname to 'grml' on systems running from CD
+CONFIG_HOTPLUG_MAIN='no' # start hotplug system [should be handled by udev now]
+CONFIG_HOTPLUG_AGENT='no' # deactivate specific hotplug agent(s) via bootparam
+CONFIG_HOTPLUG_BLACKLIST='no' # check for blacklist bootparam
+CONFIG_HWINFO='no' # run hwinfo for module-detection (requires bootparam 'hwinfo'!)
+CONFIG_INTERACTIVE='yes' # check for expert-mode as bootparam
+CONFIG_LANGUAGE='yes' # allow language specification via commandline
+CONFIG_LD_MOD='yes' # run ldconfig and depmod on systems running from harddisk; remove /etc/grml.first.boot for forcing
+CONFIG_LOCAL_NET='yes' # bring up loopback interface
+CONFIG_LOG='yes' # DEBUG=/dev/null or logfile int /tmp/...
+CONFIG_MODEM='yes' # check for AC'97 Modem Controller modem
+CONFIG_MODULES='yes' # load modules specified in /etc/grml/modules
+CONFIG_MOUSE='yes' # show mouse information (expert-mode)
+CONFIG_MYCONFIG='yes' # check if we want the config floppy
+CONFIG_NETCONFIG='yes' # download configuration archive provided by bootoption netconfig=...
+CONFIG_NETIPV6='yes' # check for bootparam ipv6
+CONFIG_PASSWD='yes' # set password via bootparam passwd
+CONFIG_PCMCIA='no' # check for pcmcia and start cardmgr
+CONFIG_SERVICES='yes' # check for services to run, provided via bootparam
+CONFIG_SETKEYCODES='yes' # run setkeycodes when bootoption setkeycodes found
+CONFIG_SMALL='yes' # use a less "bloat" /etc/inittab for small computer with less RAM
+CONFIG_SPLASH='yes' # bootsplash
+CONFIG_SSH='yes' # check for bootparam ssh
+CONFIG_SWSPEAK='yes' # run software synthesizer via speakup
+CONFIG_TESTCD='yes' # CD checker
+CONFIG_TIME='yes' # set clock, check for bootparam utc/gmt [only in live-mode]
+CONFIG_TIMEZONE='yes' # get bootparam 'tz' and set it as /etc/localtime [only in live-mode]
+CONFIG_VMWARE='yes' # vmware specific stuff (use xorg.conf.vmware)
+CONFIG_WELCOME='yes' # play welcome sound (audio)
+CONFIG_WONDERSHAPER='yes' # start wondershaper with options provided via bootparam
+CONFIG_XSTARTUP='yes' # start X window system via grml-x [only in live-mode]
+## END OF FILE #################################################################
--- /dev/null
+#!/bin/zsh
+# Filename: autoconfig.functions
+# Purpose: basic system configuration and hardware setup for grml system
+# Authors: grml-team (grml.org), (c) Klaus Knopper <knopper@knopper.net>, (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Don Okt 12 13:00:04 CEST 2006 [mika]
+################################################################################
+
+# {{{ path, variables, signals, umask, zsh
+export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin"
+DEBUG="/dev/null"
+KERNEL="$(uname -r)"
+umask 022
+
+# Ignore these signals in non-interactive mode: INT, TERM, SEGV
+[ -z "$PS1" ] && trap "" 2 3 11
+
+# zsh stuff
+iszsh(){
+if [ -n "$ZSH_VERSION" ] ; then
+ return 0
+else
+ return 1
+fi
+}
+# avoid 'no matches found: ...'
+iszsh && setopt no_nomatch # || echo "Warning: not running under zsh!"
+# }}}
+
+### {{{ Utility Functions
+
+# Simple shell grep
+stringinfile(){
+ case "$(cat $2)" in *$1*) return 0;; esac
+ return 1
+}
+
+# same for strings
+stringinstring(){
+ case "$2" in *$1*) return 0;; esac
+ return 1
+}
+
+# Reread boot command line; echo last parameter's argument or return false.
+getbootparam(){
+ stringinstring " $1=" "$CMDLINE" || return 1
+ result="${CMDLINE##*$1=}"
+ result="${result%%[ ]*}"
+ echo "$result"
+ return 0
+}
+
+# Check boot commandline for specified option
+checkbootparam(){
+ stringinstring " $1" "$CMDLINE"
+ return "$?"
+}
+
+checkvalue(){
+ if [ "$1" = "yes" ] ; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+checkgrmlsmall(){
+ grep -q small /etc/grml_version 2>>$DEBUG && return 0 || return 1
+}
+
+checkgrmlusb(){
+ grep -q usb /etc/grml_version 2>>$DEBUG && return 0 || return 1
+}
+### }}}
+
+# {{{ filesystems (proc, pts, sys) and fixes
+mount_proc(){
+ [ -f /proc/version ] || mount -t proc /proc /proc 2>/dev/null
+}
+
+mount_pts(){
+ stringinfile "/dev/pts" /proc/mounts || mount -t devpts /dev/pts /dev/pts 2>/dev/null
+}
+
+mount_sys(){
+ [ -d /sys/devices ] || mount -t sysfs /sys /sys 2>/dev/null
+}
+# }}}
+
+# {{{ Read in boot parameters
+CMDLINE="$(cat /proc/cmdline)"
+[ -d /cdrom/bootparams/ ] && CMDLINE="$CMDLINE $(cat /cdrom/bootparams/* | tr '\n' ' ')"
+# }}}
+
+# {{{ Check if we are running from the grml-CD or HD
+INSTALLED=""
+[ -e /GRML/etc/grml_cd ] || INSTALLED="yes"
+
+# testcd
+TESTCD=""
+checkbootparam "testcd" >>$DEBUG 2>&1 && TESTCD="yes"
+# }}}
+
+# {{{ source lsb-functions , color handling
+if checkbootparam "nocolor"; then
+ RC_NOCOLOR=yes
+ . /etc/grml/lsb-functions
+ einfo "Disabling colors in bootsequence as requested on commandline." ; eend 0
+else
+ . /etc/grml/lsb-functions
+ . /etc/grml_colors
+fi
+# }}}
+
+# {{{ debug
+config_debug(){
+ if checkbootparam "debug"; then
+ BOOTDEBUG="yes"
+ fi
+ if stringinstring "BOOT_IMAGE=debug " "$CMDLINE" ; then
+ BOOTDEBUG="yes"
+ fi
+ rundebugshell(){
+ if [ -n "$BOOTDEBUG" ]; then
+ einfo "Starting intermediate shell stage $stage as requested by \"debug\" option."
+ eindent
+ if [ -r /etc/grml/screenrc ] ; then
+ einfo "Starting GNU screen to be able to use a full featured shell environment."
+ einfo "Just exit the shells (and therefore screen) to continue boot process..."
+ /bin/zsh -c "screen -c /etc/grml/screenrc"
+ else
+ einfo "Notice that the shell does not provide job handling: ctrl-z, bg and fg won't work!"
+ einfo "Just exit the shell to continue boot process..."
+ /bin/zsh
+ fi
+ eoutdent
+ fi
+ }
+}
+# }}}
+
+# {{{ log
+config_log(){
+if checkbootparam "log"; then
+ export DEBUG="/tmp/grml.log.`date +%Y%m%d`"
+ touch $DEBUG
+ einfo "Bootparameter log found. Log files: ${DEBUG} and /var/log/boot."
+ eindent
+ einfo "Starting bootlogd."
+ bootlogd -r -c 1>>$DEBUG 2>&1 ; eend $?
+ eoutdent
+else
+ DEBUG="/dev/null"
+fi
+}
+# }}}
+
+# {{{ Check if we are in interactive startup mode
+INTERACTIVE=""
+stringinstring "BOOT_IMAGE=expert " "$CMDLINE" && INTERACTIVE="yes"
+# }}}
+
+# {{{ set firmware timeout via bootparam
+config_fwtimeout(){
+ if checkbootparam fwtimeout ; then
+ TIMEOUT="$(getbootparam 'fwtimeout' 2>>$DEBUG)"
+ einfo "Bootoption fwtimeout found. (Re)Loading firmware_class module."
+ rmmod firmware_class 1>>$DEBUG 2>&1
+ modprobe firmware_class ; eend $?
+ fi
+ if [ -z "$TIMEOUT" ] ; then
+ TIMEOUT="100" # linux kernel default: 10
+ fi
+ if [ -f /sys/class/firmware/timeout ] ; then
+ einfo "Setting timeout for firmware loading to ${TIMEOUT}."
+ echo 100 > /sys/class/firmware/timeout ; eend $?
+ fi
+}
+# }}}
+
+### {{{ language configuration / localization
+config_language(){
+
+ einfo "Activating language settings:"
+ eindent
+
+ # people can specify $LANGUAGE and $CONSOLEFONT in a config file:
+ [ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig
+
+ grep -q ' lang=.*-utf8' /proc/cmdline && UTF8='yes' || UTF8=''
+
+ # check for bootoption which overrides config from /etc/grml/autoconfig:
+ BOOT_LANGUAGE="$(getbootparam lang 2>>$DEBUG)"
+ [ -n "$BOOT_LANGUAGE" ] && LANGUAGE="$BOOT_LANGUAGE"
+
+ # set default to 'en' in live-cd mode if $LANGUAGE is not yet set:
+ if [ -z "$INSTALLED" ] ; then
+ [ -n "$LANGUAGE" ] || LANGUAGE='en'
+ fi
+
+ # if bootoption lang is used update /etc/default/locale, otherwise *not*!
+ if [ -n "$BOOT_LANGUAGE" ] ; then
+ [ -x /usr/sbin/grml-setlang ] && /usr/sbin/grml-setlang "$LANGUAGE"
+ fi
+
+ # set console font
+ if [ -z "$CONSOLEFONT" ] ; then
+ if ! checkbootparam "nodefaultfont" >>$DEBUG 2>&1 ; then
+ # [ -n "$UTF8" ] && CONSOLEFONT='LatArCyrHeb-16' || CONSOLEFONT='Lat15-Terminus16'
+ if [ -r /usr/share/consolefonts/Lat15-Terminus16.psf.gz ] ; then
+ CONSOLEFONT='Lat15-Terminus16'
+ else
+ ewarn "/usr/share/consolefonts/Lat15-Terminus16.psf.gz not available. Please upgrade package console-terminus." ; eend 1
+ fi
+ fi
+ fi
+
+ # export it now, so error messages get translated, too
+ if checkgrmlsmall ; then
+ export LANG='C' # grml-small does not provide any further locales
+ else
+ [ -r /etc/default/locale ] && . /etc/default/locale
+ export LANG LANGUAGE
+ fi
+
+ # configure keyboard layout, read in already set values first:
+ [ -r /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
+
+ # now allow keyboard override by boot commandline for later use:
+ KKEYBOARD="$(getbootparam keyboard 2>>$DEBUG)"
+ [ -n "$KKEYBOARD" ] && KEYTABLE="$KKEYBOARD"
+ # notce: de/at is a bad choice, so take de-latin1-nodeadkeys instead:
+ [[ "$KKEYBOARD" == 'de' ]] && KEYTABLE=de-latin1-nodeadkeys
+ [[ "$KKEYBOARD" == 'at' ]] && KEYTABLE=de-latin1-nodeadkeys
+
+ # modify /etc/sysconfig/keyboard only in live-cd mode:
+ if [ -z "$INSTALLED" ] ; then
+
+ local LANGUAGE="$BOOT_LANGUAGE"
+ . /etc/grml/language-functions
+ # allow setting xkeyboard explicitly different than console keyboard
+ KXKEYBOARD="$(getbootparam xkeyboard 2>>$DEBUG)"
+ if [ -n "$KXKEYBOARD" ]; then
+ XKEYBOARD="$KXKEYBOARD"
+ KDEKEYBOARD="$KXKEYBOARD"
+ elif [ -n "$KKEYBOARD" ]; then
+ XKEYBOARD="$KKEYBOARD"
+ KDEKEYBOARD="$KKEYBOARD"
+ fi
+
+ # duplicate of previous code to make sure /etc/grml/language-functions
+ # does not overwrite our values....
+ # now allow keyboard override by boot commandline for later use:
+ KKEYBOARD="$(getbootparam keyboard 2>>$DEBUG)"
+ [ -n "$KKEYBOARD" ] && KEYTABLE="$KKEYBOARD"
+ # notce: de/at is a bad choice, so take de-latin1-nodeadkeys instead:
+ [[ "$KKEYBOARD" == 'de' ]] && KEYTABLE=de-latin1-nodeadkeys
+ [[ "$KKEYBOARD" == 'at' ]] && KEYTABLE=de-latin1-nodeadkeys
+
+ # write keyboard related variables to file for later use
+ echo "KEYTABLE=\"$KEYTABLE\"" > /etc/sysconfig/keyboard
+ echo "XKEYBOARD=\"$XKEYBOARD\"" >> /etc/sysconfig/keyboard
+ echo "KDEKEYBOARD=\"$KDEKEYBOARD\"" >> /etc/sysconfig/keyboard
+ echo "KDEKEYBOARDS=\"$KDEKEYBOARDS\"" >> /etc/sysconfig/keyboard
+ fi
+
+ [ -r /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
+
+ # Set default keyboard before interactive setup
+ if [ -n "$KEYTABLE" ] ; then
+ einfo "Running loadkeys for ${WHITE}${KEYTABLE}${NORMAL} in background"
+ loadkeys -q $KEYTABLE &
+ eend $?
+ fi
+
+ if [ -n "$CONSOLEFONT" ] ; then
+ einfo "Running consolechars using ${CONSOLEFONT}"
+ consolechars -f $CONSOLEFONT || consolechars -d
+ eend $?
+
+ if [ -n "$UTF8" ] ; then
+ einfo "Notice: run 'filterm - dynafont' in your shell to enable a unicode capable console."
+ fi
+ fi
+
+ # we have to set up all consoles, therefore loop it over all ttys:
+ if [ -n "$CHARMAP" ] ; then
+ einfo "Running consolechars for ${CHARMAP}"
+ NUM_CONSOLES=`fgconsole --next-available`
+ NUM_CONSOLES=`expr ${NUM_CONSOLES} - 1`
+ [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
+ for vc in `seq 0 ${NUM_CONSOLES}` ; do
+ consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
+ done
+ eend ${RC}
+ fi
+
+ eoutdent
+}
+# }}}
+
+# {{{ Set hostname
+config_hostname(){
+ if checkbootparam hostname ; then
+ HOSTNAME="$(getbootparam 'hostname' 2>>$DEBUG)"
+ einfo "Setting hostname to $HOSTNAME as requested."
+ sed -i "s/^127.0.0.1.*localhost/127.0.0.1 $HOSTNAME localhost/" /etc/hosts
+ hostname $HOSTNAME ; eend $?
+ else
+ hostname --file /etc/hostname
+ fi
+}
+# }}}
+
+# fstabuser (needed when running from harddisk with username != grml {{{
+config_userfstab(){
+ fstabuser=$(getent passwd 1000 | cut -d: -f1)
+ [ -n "$fstabuser" ] || fstabuser='grml'
+}
+# }}}
+
+# {{{ Set clock (Local time is more often used than GMT, so it is default)
+config_time(){
+ # don't touch the files if running from harddisk:
+ if [ -z "$INSTALLED" ]; then
+ UTC=""
+ checkbootparam utc >>$DEBUG 2>&1 && UTC="-u"
+ checkbootparam gmt >>$DEBUG 2>&1 && UTC="-u"
+ # hwclock uses the TZ variable
+ export TZ
+ hwclock $UTC -s
+ fi
+}
+# }}}
+
+# {{{ print kernel info
+config_kernel(){
+ vmware-detect &>/dev/null && VMWARE="inside ${WHITE}VMWare${NORMAL}"
+ einfo "Running Linux Kernel $KERNEL $VMWARE" ; eend 0
+}
+# }}}
+
+# {{{ vmware specific stuff
+config_vmware(){
+if checkbootparam novmware ; then
+ ewarn "Skipping running vmware specific stuff as requested on boot commandline." ; eend 0
+else
+ if [ -z "$INSTALLED" ]; then
+ if vmware-detect ; then
+ if [ -r /etc/X11/xorg.conf.vmware ] ; then
+ einfo "Copying /etc/X11/xorg.conf.vmware to /etc/X11/xorg.conf"
+ cp /etc/X11/xorg.conf.vmware /etc/X11/xorg.conf ; eend $?
+ fi
+ fi
+ fi
+fi
+}
+# }}}
+
+# {{{ installed on hd?
+config_checkfs(){
+if [ -n "$INSTALLED" ]; then
+ einfo "Running from HD, checking filesystems."
+# We are running from HD, so a file system check is recommended
+ [ -f /etc/init.d/checkroot.sh ] && /etc/init.d/checkroot.sh
+ [ -f /etc/init.d/checkfs.sh ] && /etc/init.d/checkfs.sh
+ eend 0
+fi
+}
+# }}}
+
+# {{{ / must be read-write in any case, starting from here
+config_remount_root(){
+ mount -o remount,rw / 2>>$DEBUG
+}
+# }}}
+
+# {{{ ld.so.cache + depmod
+config_ld_mod(){
+if [ -n "$INSTALLED" ]; then
+ if ! [ -r /etc/grml.first.boot ] ; then
+ einfo "Running from HD for the first time, regenerate ld.so.cache and modules.dep:"
+ eindent
+# Regenerate ld.so.cache and module dependencies on HD
+ einfo "Running ldconfig" ; ldconfig ; eend $?
+ einfo "Running depmod" ; depmod -a ; eend $?
+ touch /etc/grml.first.boot
+ eend 0
+ eoutdent
+ fi
+fi
+}
+# }}}
+
+# update_progress {{{
+update_progress(){
+ # be sure we are non-blocking
+ (echo "$1" > /etc/sysconfig/progress) &
+}
+# }}}
+
+# {{{ timezone
+config_timezone(){
+ # don't touch the files if running from harddisk:
+ if [ -z "$INSTALLED" ]; then
+ einfo "Setting timezone."
+ KTZ="$(getbootparam tz 2>>$DEBUG)"
+ [ -f "/usr/share/zoneinfo/$KTZ" ] && TZ="$KTZ"
+ rm -f /etc/localtime
+ cp "/usr/share/zoneinfo/$TZ" /etc/localtime && eend 0
+ fi
+}
+# }}}
+
+# small computer / nearly no ram {{{
+config_small(){
+
+RAM=$(/usr/bin/gawk '/MemTotal/{print $2}' /proc/meminfo)
+# MEM=$(/usr/bin/gawk 'BEGIN{m=0};/MemFree|Cached|SwapFree/{m+=$2};END{print m}' /proc/meminfo)
+eindent
+
+if checkbootparam "small"; then
+ einfo "Information: ${RAM} kB of RAM available." ; eend 0
+ einfo "Bootoption small detected. Activating small system."
+ if [ -r /etc/inittab.small ] ; then
+ mv /etc/inittab /etc/inittab.normal
+ mv /etc/inittab.small /etc/inittab
+ else
+ sed -i 's/^9/#&/' /etc/inittab
+ sed -i 's/^10/#&/' /etc/inittab
+ sed -i 's/^11/#&/' /etc/inittab
+ sed -i 's/^12/#&/' /etc/inittab
+ fi
+ /sbin/telinit q ; eend $?
+else
+ if checkgrmlsmall ; then
+ if [[ $RAM -lt 25000 ]] ; then
+ ewarn "Information: ${RAM} kB of RAM available." ; eend 1
+ ewarn "At least 32MB of RAM should be available for grml-small." ; eend 1
+ ewarn "Use the bootoption small to save some more MB of memory usage." ; eend 0
+ ewarn "Dropping you into a rescue shell. To continue booting exit the shell." ; eend 0
+ /bin/zsh --login
+ else
+ einfo "Information: ${RAM} kB of RAM available." ; eend 0
+ fi
+ else
+ if [[ $RAM -lt 58000 ]] ; then
+ ewarn "Information: ${RAM} kB of RAM available." ; eend 1
+ ewarn "At least 64MB of RAM should be available for grml." ; eend 1
+ ewarn "Use the bootoption small to save some more MB of memory usage." ; eend 0
+ ewarn "Dropping you into a rescue shell. To continue booting exit the shell." ; eend 0
+ /bin/zsh --login
+ else
+ einfo "Information: ${RAM} kB of RAM available." ; eend 0
+ fi
+ fi
+fi
+eoutdent
+}
+# }}}
+
+# skip startup of w3m {{{
+config_fast(){
+if checkbootparam "fast"; then
+ ewarn "Bootoption fast detected. Skipping startup of w3m."
+ sed -i 's#^1:.*#1:12345:respawn:/usr/bin/openvt -f -c 1 -w -- /bin/zsh#' /etc/inittab
+ /sbin/telinit q ; eend $?
+fi
+}
+# }}}
+
+# activate serial console {{{
+config_console(){
+if checkbootparam "console"; then
+ einfo "Bootoption (for serial) console detected. Activating mgetty."
+ sed -i 's/^#T0/T0/' /etc/inittab
+ sed -i 's/^#T1/T1/' /etc/inittab
+ /sbin/telinit q ; eend $?
+fi
+}
+# }}}
+
+# For burning on IDE-CD-Roms, k3b (and others) check for special permissions {{{
+config_cdrom_perm(){
+CDROMS=""
+for DEVICE in /proc/ide/hd?; do
+ [ "$(cat $DEVICE/media 2>/dev/null)" = "cdrom" ] && CDROMS="$CDROMS /dev/${DEVICE##*/}"
+done
+[ -n "$CDROMS" ] && { chown root.cdrom $CDROMS; chmod 666 $CDROMS; } 2>/dev/null
+}
+# }}}
+
+# {{{ Bring up loopback interface now
+config_local_net(){
+ if [ -z "$INSTALLED" ] ; then
+ grep -q lo=lo /etc/network/run/ifstate 2>/dev/null || ifup lo
+ fi
+}
+# }}}
+
+# firewire devices {{{
+# the raw1394 driver does not yet export info into SYSFS,
+# so let's create raw1394 device manually
+# http://www.michael-prokop.at/blog/index.php?p=352
+config_firewire_dev(){
+if checkbootparam "nofirewiredev" ; then
+ ewarn "Skipping creating some firewire devices as requested on boot commandline." ; eend 0
+else
+#if [ "${KERNEL%-*}" == "2.6.11" ] ; then
+ einfo "Creating some firewire devices (fix kernel 2.6-bug)."
+# cd /dev && MAKEDEV video1394 raw1394
+ [ -r /dev/raw1394 ] || mknod /dev/raw1394 c 171 0
+ [ -r /dev/video1394 ] || mknod -m 666 /dev/video1394 c 171 16
+# mknod -m 666 /dev/dv1394 c 171 32 # for NTSC
+ [ -r /dev/dv1394 ] || mknod -m 666 /dev/dv1394 c 171 34 # for PAL
+ chown -R root:video /dev/raw1394 /dev/video1394 /dev/dv1394
+ chmod -R 664 /dev/raw1394 /dev/video1394 /dev/dv1394 ; eend $?
+fi
+#fi
+}
+# }}}
+
+# {{{ copy passwd-lockfile to ramdisk (fix unionfs-behaviour)
+# otherwise we will get: passwd: Authentication token lock busy
+config_fix_passwd(){
+ if [ -z "$INSTALLED" ] ; then
+ touch /etc/.pwd.lock
+ fi
+}
+# }}}
+
+# {{{ CD Checker
+config_testcd(){
+if [ -n "$TESTCD" ]; then
+ einfo "Checking CD data integrity as requested by '${WHITE}testcd${NORMAL}' boot option."
+ einfo "Reading files and checking against GRML/md5sums, this may take a while..."
+ echo -n "${RED}"
+ ( cd /cdrom/GRML/ ; rm -f /tmp/md5sum.log ; md5sum -c md5sums 2>&1 | tee /tmp/md5sum.log )
+ if [ "$?" = "0" ]; then
+ echo " ${GREEN}Everything looks OK${NORMAL}"
+ else
+ echo "${RED} *** CHECKSUM FAILED FOR THESE FILES: ***"
+ egrep -v '(^md5sum:|OK$)' /tmp/md5sum.log
+ echo "${RED} *** DATA ON YOUR CD MEDIUM IS POSSIBLY INCOMPLETE OR DAMAGED, ***${NORMAL}"
+ echo "${RED} *** OR YOUR COMPUTER HAS BAD RAM. ***${NORMAL}"
+ echo -n "${CYAN}Hit return to contine, or press the reset button to quit.${NORMAL}\a\a\a "
+ read a
+ fi
+ eend 0
+fi
+}
+# }}}
+
+# {{{ hardware detection via discover
+config_discover(){
+if checkbootparam "nodisc" ; then
+ ewarn "Skipping hardware detection via discover as requested on boot commandline." ; eend 0
+else
+ if [ -x /sbin/discover ] ; then
+ einfo "Discovering hardware. Trying to load the following modules in background:"
+ eindent
+ einfo "$(discover --data-path=linux/module/name --data-path=linux/modules/options --format="%s %s" --data-version=`uname -r` --enable-bus all | sort -u | xargs echo)"
+ eoutdent
+ /sbin/discover-modprobe -v 1>>$DEBUG 2>&1 &
+ eend 0
+ else
+ eerror "Application discover not available. Information: udev should handle hardware recognition." ; eend 0
+ fi
+fi
+}
+# }}}
+
+# {{{ hardware detection via hwinfo
+config_hwinfo(){
+if checkbootparam hwinfo >>$DEBUG 2>&1; then
+ einfo "Discovering hardware via hwinfo:"
+ MODULES=$(su grml hwinfo | grep "Cmd: \"modprobe" | awk '{print $5}' | sed 's/"//')
+ echo -n " Loading modules: "
+ for i in `echo $MODULES` ; do echo -n $i && modprobe $i ; done
+ eend 0
+fi
+}
+# }}}
+
+# {{{ disable hotplug agents on request
+config_hotplug_agent(){
+if checkbootparam "noagent" ; then
+ AGENT="$(getbootparam 'noagent' 2>>$DEBUG)"
+ AGENTLIST=$(echo "$AGENT" | sed 's/,/\\n/g')
+ AGENTNL=$(echo "$AGENT" | sed 's/,/ /g')
+ einfo "Disabling hotplug-agent(s) $AGENTNL"
+ for agent in $(echo -e $AGENTLIST) ; do
+ mv /etc/hotplug/${agent}.rc /etc/hotplug/${agent}.norc
+ done
+ [ "$?" == "0" ] ; eend $?
+fi
+}
+# }}}
+
+# {{{ blacklist of hotplug-modules
+config_hotplug_blacklist(){
+if checkbootparam "black" ; then
+ BLACK="$(getbootparam 'black' 2>>$DEBUG)"
+ BLACKLIST=$(echo "$BLACK" | sed 's/,/\\n/g')
+ BLACKNL=$(echo "$BLACK" | sed 's/,/ /g')
+ einfo "Blacklisting $BLACKNL via /etc/hotplug/blacklist.d/hotplug-light"
+ echo -e "$BLACKLIST" >> /etc/hotplug/blacklist.d/hotplug-light
+ echo -e "$BLACKLIST" >> /etc/hotplug/blacklist
+ eend 0
+fi
+}
+# }}}
+
+# {{{ run hotplug
+config_hotplug(){
+if checkbootparam "nohotplug" ; then
+ ewarn "Skipping running hotplug as requested on boot commandline." ; eend 0
+else
+ if [ -r /etc/init.d/hotplug ] ; then
+ einfo "Starting hotplug system in background."
+ /etc/init.d/hotplug start 1>>$DEBUG 2>>$DEBUG &
+ eend 0
+ elif [ -r /etc/init.d/hotplug-light ] ; then
+ einfo "Starting hotplug-light system in background."
+ /etc/init.d/hotplug-light start 1>>$DEBUG 2>>$DEBUG &
+ eend 0
+ else
+ ewarn "No hotplug system found. Should be handled by udev. Skipping execution." ; eend 0
+ fi
+fi
+}
+# }}}
+
+# {{{ blacklist specific module
+config_blacklist(){
+if checkbootparam "blacklist" ; then
+ if [ -z "$INSTALLED" ]; then
+ einfo "Bootoption blacklist found."
+ BLACK="$(getbootparam 'blacklist' 2>>$DEBUG)"
+ if [ -n "$BLACK" ] ; then
+ einfo "Blacklisting module ${BLACK} via /etc/modprobe.d/grml."
+ echo "# begin entry generated by config_blacklist of grml-autoconfig" >> /etc/modprobe.d/grml
+ echo "blacklist $BLACK" >> /etc/modprobe.d/grml
+ echo "alias $BLACK off" >> /etc/modprobe.d/grml
+ echo "# end entry generated by config_blacklist of grml-autoconfig" >> /etc/modprobe.d/grml ; eend $?
+ else
+ eerror "No given module for blacklist found. Blacklisting will not work therefor."
+ fi
+ else
+ ewarn "Backlisting via bootoption does not work on harddisk installations." ; eend 1
+ eindent
+ einfo "Please blacklist the module(s) via /etc/modprobe.d/blacklist."
+ eoutdent
+ fi
+fi
+}
+# }}}
+
+# {{{ ACPI
+config_acpi_apm(){
+if [ -d /proc/acpi ]; then
+ if checkbootparam "noacpi"; then
+ ewarn "Skipping ACPI Bios detection as requested on boot commandline." ; eend 0
+ else
+ einfo "ACPI Bios found, activating modules: "
+ eindent
+ found=""
+ for a in /lib/modules/$KERNEL/kernel/drivers/acpi/*; do
+ basename="${a##*/}"
+ basename="${basename%%.*}"
+ case "$basename" in *_acpi)
+ egrep -qi "${basename%%_acpi}" /proc/acpi/dsdt 2>>$DEBUG || continue ;;
+ esac
+ modprobe $basename >>$DEBUG 2>&1 && found="yes"
+ local BASE="$BASE $basename"
+ done
+ if [ -n "$found" ] ; then
+ einfo "$BASE" ; eend 0
+ else
+ ewarn "(none)" ; eend 1
+ fi
+ if ! [ -S /var/run/acpid.socket ] ; then
+ if ! [ -r /var/run/dbus/pid ] ; then
+ einfo "Starting acpi daemon."
+ /etc/init.d/acpid start >>$DEBUG ; eend $?
+ else
+ eerror "acpid error: it seems you are running d-bus/hal, but acpid needs to be started before d-bus."
+ eerror "Solution: please activate acpid via /etc/runlevel.conf"
+ eend 1
+ fi
+ else
+ ewarn "acpi daemon already running."
+ eend 0
+ fi
+ eoutdent
+ fi
+else
+# APM
+ if checkbootparam "noapm"; then
+ ewarn "Skipping APM Bios detection as requested on boot commandline." ; eend 0
+ else
+ modprobe apm power_off=1 >>$DEBUG 2>&1
+ if [ "$?" = "0" ] ; then
+ if [ -x /etc/init.d/apmd ] ;then
+ einfo "APM Bios found, enabling power management functions."
+ /etc/init.d/apmd start ; eend $?
+ fi
+ else
+ eerror "Loading apm module failed." ; eend 1
+ fi
+ fi
+fi
+}
+# }}}
+
+# {{{ PCMCIA Check/Setup
+# This needs to be done before other modules are being loaded (by hwsetup)
+config_pcmcia(){
+if checkbootparam "nopcmcia"; then
+ ewarn "Skipping PCMCIA detection as requested on boot commandline." ; eend 0
+else
+ if /usr/sbin/laptop-detect ; then
+ einfo "Detected Laptop - checking for PCMCIA." && eend 0
+ modprobe pcmcia_core >>$DEBUG 2>&1
+ # Try Cardbus or normal PCMCIA socket drivers
+ modprobe yenta_socket >>$DEBUG 2>&1 || modprobe i82365 >>$DEBUG 2>&1 || modprobe pd6729 >>$DEBUG 2>&1 || modprobe tcic >>$DEBUG 2>&1
+ if [ "$?" = "0" ]; then
+ modprobe ds >>$DEBUG 2>&1
+ if [ -d /proc/bus/pccard ] ; then
+ if [ -x /sbin/cardmgr ] ; then
+ einfo "PCMCIA found, starting cardmgr."
+ cardmgr >>$DEBUG 2>&1 && sleep 6 && eend 0
+ else
+ eerror "No cardmgr found. Make sure package pcmciautils is installed, it should handle it instead." ; eend 1
+ fi
+ fi
+ fi
+ fi
+fi
+}
+# }}}
+
+# {{{ run software synthesizer via speakup
+config_swspeak(){
+if checkbootparam swspeak ; then
+ if [ -d /proc/speakup/ ] ; then
+ einfo "Bootoption swspeak found. Kernel supports speakup." ; eend 0
+ eindent
+ if [ -x /etc/init.d/speech-dispatcher ] ; then
+ einfo "Starting speech-dispatcher."
+ /etc/init.d/speech-dispatcher start 1>>DEBUG ; eend $?
+ einfo "Activating sftsyn in Kernel."
+ echo sftsyn >/proc/speakup/synth_name ; eend $?
+ einfo "Just run swspeak if you want to use software synthesizer via speakup."
+ flite -o play -t "Finished activating software speakup. Just run swspeak when booting finished."
+ else
+ eerror "speech-dispatcher not available. swspeak will not work without it." ; eend 1
+ flite -o play -t "speech-dispatcher not available. speakup will not work without it."
+ fi
+ eoutdent
+ else
+ eerror "Kernel does not seem to support speakup. Skipping swspeak." ; eend 1
+ flite -o play -t "Kernel does not seem to support speakup. Sorry."
+ fi
+fi
+}
+# }}}
+
+# {{{ Check for blind option or brltty
+config_blind(){
+BLIND=""
+checkbootparam "blind" && BLIND="yes"
+BRLTTY="$(getbootparam brltty 2>>$DEBUG)"
+
+if [ -n "$BLIND" -o -n "$BRLTTY" ]; then
+ if [ -x /sbin/brltty ]; then
+ # Blind option detected, start brltty now.
+ # modprobe serial_core parport_serial generic_serial && echo "done"
+ CMD=brltty
+ BRLTYPE=""
+ BRLDEV=""
+ BRLTEXT=""
+ if [ -n "$BRLTTY" ]; then
+ # Extra options
+ BRLTYPE="${BRLTTY%%,*}"
+ R="${BRLTTY#*,}"
+ if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
+ BRLTTY="$R"
+ BRLDEV="${BRLTTY%%,*}"
+ R="${BRLTTY#*,}"
+ if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
+ BRLTTY="$R"
+ BRLTEXT="${BRLTTY%%,*}"
+ R="${BRLTTY#*,}"
+ fi
+ fi
+ fi
+ [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE"
+ [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV"
+ [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT"
+ einfo "Starting braille-display manager."
+# ( exec $CMD & )
+ ( sh -c "$CMD" & )
+ sleep 2 && BLINDSOUND="yes"
+ eend 0
+ fi
+fi
+}
+# }}}
+
+# {{{ Interactive configuration
+config_interactive(){
+if [ -n "$INTERACTIVE" ] ; then
+einfo "Entering interactive configuration second stage."
+
+ echo " ${GREEN}Your console keyboard defaults to: ${MAGENTA}${KEYTABLE}"
+ echo -n "${CYAN}Do you want to (re)configure your console keyboard?${NORMAL} [Y/n] "
+ read a
+ [ "$a" != "n" ] && /usr/sbin/dpkg-reconfigure console-data ; eend $?
+
+ echo -n "${CYAN}Do you want to (re)configure your soundcard?${NORMAL} [Y/n] "
+ read a
+ [ "$a" != "n" ] && alsaconf && ( exec aumix -m 0 >>$DEBUG 2>&1 & ) ; eend $?
+
+ echo -n "${CYAN}Do you want to (re)configure your graphics (X11) subsystem?${NORMAL} [Y/n] "
+ read a
+ [ "$a" != "n" ] && xorgcfg -textmode ; eend $?
+ echo " ${GREEN}Interactive configuration finished. Everything else should be fine for now.${NORMAL}"
+fi
+eend 0
+}
+# }}}
+
+# {{{ AGP
+config_agp(){
+if checkbootparam forceagp ; then
+# Probe for AGP. Hope this can fail safely
+ stringinfile "AGP" "/proc/pci" 2>>$DEBUG && { modprobe agpgart || modprobe agpgart agp_try_unsupported=1; } >>$DEBUG 2>&1 && einfo "AGP bridge detected." ; eend 0
+fi
+}
+# }}}
+
+# {{{ automount(er)
+config_automounter(){
+if checkbootparam automounter ; then
+ RUNLEVEL="$(runlevel)"
+ AUTOMOUNTER=""
+ [ -x /etc/init.d/autofs ] && [ "$RUNLEVEL" != "N 1" ] && [ "$RUNLEVEL" != "N S" ] && AUTOMOUNTER="yes"
+
+addautomount(){
+# /dev/ice options
+ d="${1##*/}"
+ if [ -n "$AUTOMOUNTER" ]; then
+ [ -d "/mnt/$d" -a ! -L "/mnt/$d" ] && rmdir /mnt/$d
+ [ -d "/mnt/auto/$d" ] || mkdir -p "/mnt/auto/$d"
+ [ -L "/mnt/$d" ] || ln -s "/mnt/auto/$d" "/mnt/$d"
+ anew="$d -fstype=auto,$2 :$i"
+ stringinfile "$anew" "/etc/auto.mnt" || echo "$anew" >> /etc/auto.mnt
+ AUTOMOUNTS="$AUTOMOUNTS $d"
+ new="$1 /mnt/auto/$d auto users,noauto,exec,$2 0 0"
+ else
+ [ -d /mnt/$d ] && mkdir -p /mnt/$d
+ new="$1 /mnt/$d auto users,noauto,exec,$2 0 0"
+ fi
+ stringinfile "$new" "/etc/fstab" || echo "$new" >> /etc/fstab
+}
+
+ AUTOMOUNTS="floppy cdrom"
+# Add new devices to /etc/fstab and /etc/auto.mnt
+ for i in /dev/cdrom?*; do
+ if [ -L $i ]; then
+ addautomount "$i" "ro"
+ fi
+ done
+fi
+
+if [ -n "$AUTOMOUNTER" ]; then
+# Check for floppy dir, reinstall with automounter
+ [ -d /mnt/floppy -a ! -L /mnt/floppy ] && rmdir /mnt/floppy
+ [ -d /mnt/auto/floppy ] || mkdir -p /mnt/auto/floppy
+ [ -L /mnt/floppy ] || ln -s /mnt/auto/floppy /mnt/floppy
+ [ -d /mnt/cdrom -a ! -L /mnt/cdrom ] && rmdir /mnt/cdrom
+ [ -d /mnt/auto/cdrom ] || mkdir -p /mnt/auto/cdrom
+ [ -L /mnt/cdrom ] || ln -s /mnt/auto/cdrom /mnt/cdrom
+ rm -f /etc/fstab.new
+# Replace paths from bootfloppy
+ sed 's|/mnt/cdrom|/mnt/auto/cdrom|g;s|/mnt/floppy|/mnt/auto/floppy|g' /etc/fstab > /etc/fstab.new
+ mv -f /etc/fstab.new /etc/fstab
+# Start automounter now
+ einfo "Starting automounter for ${AUTOMOUNTS}."
+ /etc/init.d/autofs start >>$DEBUG ; eend $?
+fi
+}
+# }}}
+
+# {{{ Collect partitions from /proc/partitions first for enabling DMA
+check_partitions(){
+partitions=""
+IDEDISKS=""
+while read major minor blocks partition relax; do
+ partition="${partition##*/}"
+ [ -z "$partition" -o ! -e "/dev/$partition" ] && continue
+ case "$partition" in
+ hd?) IDEDISKS="$IDEDISKS $partition";; # IDE Harddisk, entire disk
+ sd?) ;; # SCSI Harddisk, entire disk
+# [hs]d*) partitions="$partitions /dev/$partition";; # IDE or SCSI disk partition
+ [hs]d*|ub*) partitions="$partitions /dev/$partition";; # IDE, USB or SCSI disk partition
+ esac
+done <<EOT
+$(awk 'BEGIN{old="__start"}{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print $0}}}' /proc/partitions)
+EOT
+}
+check_partitions 1>/dev/null 2>&1 # avoid output "check_partitions:3: read-only file system"
+# }}}
+
+# {{{ Enable DMA for all IDE drives now if not disabled
+# Notice: Already done by linuxrc, maybe not on hd-installations
+config_dma(){
+if checkbootparam "nodma"; then
+ ewarn "Skipping DMA accelleration as requested on boot commandline." ; eend 0
+else
+ for d in $(cd /proc/ide 2>>$DEBUG && echo hd[a-z]); do
+ if test -d /proc/ide/$d; then
+ if egrep -q 'using_dma[ \t]+0' /proc/ide/$d/settings 2>>$DEBUG; then
+ MODEL="$(cat /proc/ide/$d/model 2>>$DEBUG)"
+ test -z "$MODEL" && MODEL="[GENERIC IDE DEVICE]"
+ einfo "Enabling DMA acceleration for: ${WHITE}$d ${YELLOW}[${MODEL}]${NORMAL}"
+ echo "using_dma:1" >/proc/ide/$d/settings
+ eend 0
+ fi
+ fi
+ done
+fi
+}
+# }}}
+
+# {{{ Start creating /etc/fstab with HD partitions and USB SCSI devices now
+config_fstab(){
+NOSWAP=""
+checkbootparam "noswap" && NOSWAP="yes"
+if checkbootparam "nofstab"; then
+ ewarn "Skipping /etc/fstab creation as requested on boot commandline." ; eend 0
+else
+ checkbootparam "anyswap" && export ANYSWAP='yes' || export ANYSWAP=""
+ einfo "Scanning for harddisk partitions and creating /etc/fstab. (Disable this via boot option: nofstab)"
+ iszsh && setopt nonomatch
+ if [ -x /usr/sbin/rebuildfstab ] ; then
+ config_userfstab || fstabuser=grml
+ /usr/sbin/rebuildfstab -r -u $fstabuser -g $fstabuser ; eend $?
+ else
+ ewarn "Command rebuildfstab not found. Install package grml-rebuildfstab." ; eend 1
+ fi
+ if [ -e /var/run/rebuildfstab.pid ]; then
+ # Another instance of rebuildfstab, probably from hotplug, is still running, so just wait.
+ sleep 8
+ fi
+fi
+# Scan for swap, config, homedir
+if [ -z "$NOSWAP" -o -z "$INSTALLED" ]; then
+ einfo "Checking for swap partition(s)."
+fi
+GRML_IMG=""
+GRML_SWP=""
+HOMEDIR="$(getbootparam home)"
+if [ -n "$partitions" ]; then
+ while read p m f relax; do
+ case "$p" in *fd0*|*proc*|*sys*|*\#*) continue;; esac
+ partoptions="users,exec"
+ fnew=""
+ case "$f" in swap)
+ eindent
+ if [ -n "$NOSWAP" ]; then
+ ewarn "Ignoring swap partition ${WHITE}$p${NORMAL} as requested." ; eend 0
+ else
+ case "$(dd if=$p bs=1 count=6 skip=4086 2>/dev/null)" in
+ S1SUSP|S2SUSP|pmdisk|[zZ]*)
+ if [ -n "$ANYSWAP" ] ; then
+ einfo "Using swap partition ${WHITE}${p}${NORMAL} [bootoption anyswap found]."
+ swapon $p 2>>$DEBUG ; eend $?
+ else
+ ewarn "Suspend signature on ${WHITE}${p}${NORMAL} found, not using as swap. (Force usage via boot option: anyswap)"
+ fi
+ ;;
+ *)
+ if [[ "$p" == LABEL* ]] ; then
+ p=$(blkid -t $p | awk -F: '{print $1}')
+ fi
+ if grep -q $p /proc/swaps ; then
+ ewarn "Not using swap partition ${WHITE}${p}${NORMAL} as it is already in use." ; eend 0
+ else
+ einfo "Using swap partition ${WHITE}${p}${NORMAL}."
+ swapon $p 2>>$DEBUG ; eend $?
+ fi
+ ;;
+ esac
+ fi
+ eoutdent
+ continue
+ ;;
+ esac
+# Create mountdir if not already present, but don't try to create stuff like /proc/bus/usb
+# Notice: grml-rebuildfstab >= 0.3-1 handles this now
+# case "$m" in *none*|*proc*|*sys*|'') continue ;; esac
+# [ -d "$m" ] || mkdir -p "$m"
+# WARNING: NTFS RW mounts are only safe since Kernel 2.6.11
+ [ "$f" = "ntfs" -a "${KERNEL%.*}" != "2.6" ] && continue
+ MOUNTOPTS="ro"
+ case "$f" in
+ vfat|msdos|ntfs) MOUNTOPTS="$MOUNTOPTS,uid=${fstabuser},gid=${fstabuser}" ;;
+ ext2|ext3|reiserfs|jfs|reiser4|xfs) MOUNTOPTS="$MOUNTOPTS,noatime" ;;
+ *) continue ;;
+ # *) NONEFOUND='1'; continue ;;
+ esac
+ mount -o "$MOUNTOPTS" -t $f $p $m 2>>$DEBUG || continue
+ # Activate swapfile, if exists
+ SWAPFILE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ss][Ww][Pp] 2>/dev/null)"
+ if [ -z "$NOSWAP" -a -n "$SWAPFILE" -a -f "$SWAPFILE" ]; then
+ mount -o remount,rw $m
+ if swapon "$SWAPFILE" 2>>$DEBUG ; then
+ einfo "Using GRML swapfile ${SWAPFILE}."
+ fnew="$SWAPFILE swap swap defaults 0 0"
+ stringinfile "$fnew" "/etc/fstab" || echo "$fnew" >> /etc/fstab
+ GRML_SWP="$GRML_SWP $SWAPFILE"
+ eend 0
+ fi
+ mount -o remount,ro $m 2>>$DEBUG
+ fi
+ IMAGE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ii][Mm][Gg] 2>/dev/null)"
+ if [ -z "$INSTALLED" -a -z "$GRML_IMG" -a -n "$IMAGE" -a -f "$IMAGE" ]; then
+ if [ -n "$HOMEDIR" ]; then
+ if [ "$HOMEDIR" != "scan" -a "$HOMEDIR" != "$IMAGE" -a "$HOMEDIR" != "${IMAGE%/*.*}" ]; then
+ continue
+ fi
+ fi
+ if type -a grml-image >/dev/null 2>&1 && grml-image "$IMAGE" </dev/console >/dev/console 2>&1; then
+ GRML_IMG="$IMAGE"
+ mount -o remount,ro $m 2>>$DEBUG
+ fi
+ fi
+ eend 0
+ # Umount, if not in use
+ umount -r $m 2>/dev/null
+ done <<EOT
+$(cat /etc/fstab)
+EOT
+fi
+}
+# }}}
+
+# {{{ Mouse
+config_mouse(){
+if [ -n "$MOUSE_DEVICE" ] ; then
+ einfo "Detecting mouse: ${MOUSE_FULLNAME} at ${MOUSE_DEVICE}" ; eend $?
+fi
+}
+# }}}
+
+# {{{ IPv6 configuration
+# Load IPv6 kernel module and print IP adresses
+config_ipv6(){
+if checkbootparam "ipv6"; then
+ einfo "Enabling IPv6 as requested on boot commandline (sleeping for 2 seconds)"
+ modprobe ipv6
+ # we probably need some time until stateless autoconfiguration has happened
+ sleep 2
+ NETDEVICES="$(awk -F: '/eth.:|tr.:|wlan.:/{print $1}' /proc/net/dev 2>>$DEBUG)"
+ for DEVICE in `echo "$NETDEVICES"`
+ do
+ eindent
+ einfo "$DEVICE:"
+ ADDRESSES="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{print $3}')"
+ COUNT="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{ sum += 1};END {print sum }')"
+ eindent
+ for ADDR in `echo "$ADDRESSES"`
+ do
+ einfo "$ADDR"
+ done
+ if [ "$COUNT" -eq "0" ]
+ then
+ einfo "(none)" ; eend 1
+ fi
+ eoutdent
+ eoutdent
+ done
+ eend 0
+fi
+}
+# }}}
+
+# {{{ Fat-Client-Version: DHCP Broadcast for IP address
+config_dhcp(){
+if checkbootparam "nodhcp"; then
+ ewarn "Skipping DHCP broadcast/network detection as requested on boot commandline." ; eend 0
+else
+ NETDEVICES="$(awk -F: '/eth.:|tr.:|wlan.:/{print $1}' /proc/net/dev 2>>$DEBUG)"
+ rm -rf /etc/network/status ; mkdir -p /etc/network/status
+ for DEVICE in `echo "$NETDEVICES"` ; do
+ einfo "Network device ${WHITE}${DEVICE}${NORMAL} detected, DHCP broadcasting for IP. (Backgrounding)"
+ trap 2 3 11
+ ifconfig $DEVICE up >>$DEBUG 2>&1
+ ( pump -i $DEVICE >>$DEBUG 2>&1 && echo finished_running_pump > /etc/network/status/$DEVICE ) &
+ trap "" 2 3 11
+ sleep 1
+ eend 0
+ done
+fi
+}
+# }}}
+
+# {{{ helper functions
+findfile(){
+FOUND=""
+# search all partitions for a file in the root directory
+for i in /mnt/[sh]d[a-z] /mnt/[sh]d[a-z][1-9] /mnt/[sh]d[a-z][1-9]?*; do
+# See if it's already mounted
+ [ -f "$i/$1" ] && { echo "$i/$1"; return 0; }
+ if [ -d "$i" ] && mount -r "$i" 2>>$DEBUG; then
+ [ -f "$i/$1" ] && FOUND="$i/$1"
+ umount -l "$i" 2>>$DEBUG
+ [ -n "$FOUND" ] && { echo "$FOUND"; return 0; }
+ fi
+done
+return 2
+}
+
+fstype(){
+case "$(file -s $1)" in
+ *[Ff][Aa][Tt]*|*[Xx]86*) echo "vfat"; return 0;;
+ *[Rr][Ee][Ii][Ss][Ee][Rr]*) echo "reiserfs"; return 0;;
+ *[Xx][Ff][Ss]*) echo "xfs"; return 0;;
+ *[Ee][Xx][Tt]3*) echo "ext3"; return 0;;
+ *[Ee][Xx][Tt]2*) echo "ext2"; return 0;;
+ *data*) echo "invalid"; return 0;;
+ *) echo "auto"; return 0;;
+esac
+}
+
+# Try to mount this filesystem read-only, without or with encryption
+trymount(){
+# Check if already mounted
+case "$(cat /proc/mounts)" in *\ $2\ *) return 0;; esac
+# Apparently, mount-aes DOES autodetect AES loopback files.
+[ -b "$1" ] && { mount -t auto -o ro "$1" "$2" 2>>$DEBUG; RC="$?"; }
+# We need to mount crypto-loop files with initial rw support
+[ -f "$1" ] && { mount -t auto -o loop,rw "$1" "$2" 2>>$DEBUG; RC="$?"; }
+# Mount succeeded?
+[ "$RC" = "0" ] && return 0
+echo ""
+einfo "Filesystem not autodetected, trying to mount $1 with AES256 encryption."
+a="y"
+while [ "$a" != "n" -a "$a" != "N" ]; do
+# We need to mount crypto-loop files with initial rw support
+ mount -t auto -o loop,rw,encryption=AES256 "$1" "$2" && return 0
+ echo -n "${RED}Mount failed, retry? [Y/n] ${NORMAL}"
+ # Problem with ioctl() from getpasswd()?
+ # read a
+ read a
+done
+return 1
+}
+# }}}
+
+# {{{ CPU-detection
+config_cpu(){
+if checkbootparam "nocpu"; then
+ ewarn "Skipping CPU detection as requested on boot commandline." ; eend 0
+else
+ if ! [ -x /etc/init.d/powernowd ] ; then
+ ewarn "Skipping CPU detection as powernowd dependencies are not fulfilled." ; eend 1
+ elif [ ! -e /lib/modules/${KERNEL}/kernel/arch/i386/kernel/cpu/cpufreq -o ! -e /lib/modules/${KERNEL}/kernel/drivers/cpufreq ] ; then
+ ewarn "Skipping CPU detection as module dependencies are not fulfilled." ; eend 1
+ else
+ einfo "Detecting CPU: `awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG` " ; eend 0
+ if /usr/sbin/laptop-detect ; then
+ einfo "Detected Laptop - trying to use cpu frequency scaling:"
+# loadcpumod() {
+# for module in /lib/modules/${KERNEL}/kernel/arch/i386/kernel/cpu/cpufreq/*.ko /lib/modules/${KERNEL}/kernel/drivers/cpufreq/*.ko ; do
+# # modprobe ${${${${(f)"$(_call_program modules ${(M)words[1]##*/}modprobe -l | grep cpufreq 2>>$DEBUG)"}:#}##*/}%.*}
+# modprobe `basename ${module%%\.ko}` 1>>$DEBUG 2>&1
+# done
+# }
+# CPU=$(grep 'model name' /proc/cpuinfo | cut -b14- | head -1)
+# eindent
+# if [[ $CPU = *Intel* ]] ; then
+# einfo "Detected CPU is of type Intel - loading modules and starting cpudyn."
+# local DETECTED=1
+# loadcpumod
+# /etc/init.d/cpudyn start 1>>$DEBUG ; eend $?
+# fi
+# if [[ $CPU = *AMD* ]] ; then
+# einfo "Detected CPU is of type AMD - loading modules and starting powernowd."
+# local DETECTED=1
+# loadcpumod
+# /etc/init.d/powernowd start 1>>$DEBUG ; eend $?
+# fi
+
+ eindent
+ if [ -r /usr/bin/cpufreq-detect.sh ] ; then
+ . /usr/bin/cpufreq-detect.sh
+ if [ -n "$MODULE" -a "$MODULE" != none ]; then
+ einfo "Loading module ${MODULE} and starting powernowd."
+ modprobe cpufreq_userspace 1>>$DEBUG
+ modprobe "$MODULE" 1>>$DEBUG || modprobe "$MODULE_FALLBACK" 1>>$DEBUG
+ /etc/init.d/powernowd start 1>>$DEBUG ; eend $?
+ else
+ ewarn "Could not detect an appropriate CPU for use with powernowd - skipping." && eend 1
+ fi
+ fi
+ eoutdent
+ fi
+ fi
+fi
+}
+# }}}
+
+# {{{ autostart of ssh
+config_ssh(){
+if checkbootparam ssh ; then
+ SSH_PASSWD="$(getbootparam 'ssh' 2>>$DEBUG)"
+ einfo "Bootoption passwd found."
+ if [ -n "$SSH_PASSWD" ] ; then
+ echo "grml:$SSH_PASSWD" | chpasswd -m
+ einfo "Starting secure shell server in background."
+ /etc/init.d/rmnologin start 1>>$DEBUG 2>>$DEBUG
+ /etc/init.d/ssh start 1>>$DEBUG 2>>$DEBUG &
+ eend 0
+ else
+ eerror "No given password for ssh found. Autostart of SSH will not work." ; eend 1
+ fi
+ eindent
+ ewarn "Warning: please change the password for user grml set via bootparameter as soon as possible!"
+ eoutdent
+fi
+}
+# }}}
+
+# {{{ set password for user grml
+config_passwd(){
+if checkbootparam passwd >>$DEBUG 2>&1; then
+ einfo "Bootoption passwd found."
+ PASSWD="$(getbootparam 'passwd' 2>>$DEBUG)"
+ if [ -n "$PASSWD" ] ; then
+ echo "grml:$PASSWD" | chpasswd -m ; eend $?
+ else
+ eerror "No given password for ssh found. Autostart of SSH will not work." ; eend 1
+ fi
+ eindent
+ ewarn "Warning: please change the password for user grml set via bootparameter as soon as possible!"
+ eoutdent
+fi
+}
+# }}}
+
+# {{{ Check for persistent homedir option and eventually mount /home from there, or use a loopback file.
+config_homedir(){
+HOMEDIR="$(getbootparam home)"
+MYHOMEDEVICE=""
+MYHOMEMOUNTPOINT=""
+MYHOMEDIR=""
+if [ -n "$HOMEDIR" ]; then
+ einfo "Bootoption home detected." && eend 0
+ case "$HOMEDIR" in
+ /dev/*)
+ MYHOMEDEVICE="${HOMEDIR##/dev/}"
+ MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
+ MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
+ MYHOMEDIR="/mnt/${HOMEDIR##/dev/}"
+ ;;
+ /mnt/*)
+ MYHOMEDEVICE="${HOMEDIR##/mnt/}"
+ MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
+ MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
+ MYHOMEDIR="$HOMEDIR"
+ ;;
+ [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd])
+ MYHOMEDIR="$(findfile grml.img)"
+ MYHOMEDEVICE="${MYHOMEDIR##/mnt/}"
+ MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
+ MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
+ ;;
+ *)
+ eerror "Invalid home= option '$HOMEDIR' specified (must start with /dev/ or /mnt/ or 'scan')." ; eend 1
+ eerror "Option ignored." ; eend 1
+ ;;
+ esac
+fi
+
+if [ -n "$MYHOMEDIR" ]; then
+ if trymount "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"; then
+ [ -f "$MYHOMEMOUNTPOINT/grml.img" ] && MYHOMEDIR="$MYHOMEMOUNTPOINT/grml.img"
+ while read device mountpoint fs relax; do
+ case "$mountpoint" in *$MYHOMEMOUNTPOINT*)
+ case "$fs" in *[Nn][Tt][Ff][Ss]*)
+ umount "$MYHOMEMOUNTPOINT"; eerror "Error: will not mount NTFS filesystem on $MYHOMEDEVICE read/write!" ; eend 1
+ break
+ ;;
+ *[Ff][Aa][Tt]*)
+ # Note: This currently won't work with encrypted partitions
+ umount "$MYHOMEMOUNTPOINT"; mount -t vfat -o rw,uid=grml,gid=grml,umask=002 "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"
+ if [ ! -f "$MYHOMEDIR" ]; then
+ ewarn "WARNING: FAT32 is not a good filesystem option for /home/grml (missing socket/symlink support)."
+ ewarn "WARNING: Better use an ext2 loopback file on this device, and boot with home=$MYHOMEDEVICE/grml.img."
+ fi
+ ;;
+ esac
+ if mount -o remount,rw "$MYHOMEMOUNTPOINT"; then
+ einfo "Mounting ${WHITE}$MYHOMEDIR${NORMAL} as ${WHITE}/home/grml${NORMAL}."
+ if [ -f "$MYHOMEDIR" ]; then
+ # It's a loopback file, mount it over the /home/grml directory
+ trymount "$MYHOMEDIR" /home/grml
+ RC="$?"
+ [ "$RC" = "0" ] && ERROR="$(mount -o remount,rw /home/grml 2>&1)"
+ RC="$?"
+ else
+ # Do a --bind mount
+ ERROR="$(mount --bind "$MYHOMEDIR" /home/grml 2>&1)"
+ RC="$?"
+ fi
+ [ "$RC" = "0" ] && eend 0 || ( eerror "${ERROR}" ; eend 1 )
+ fi
+ break
+ ;;
+ esac
+ done <<EOT
+$(cat /proc/mounts)
+EOT
+ fi
+fi
+}
+# }}}
+
+# {{{ Check if we want the config floppy
+config_old_myconfig(){
+MYCONF=""
+case "$CMDLINE" in *\ myconfig*) MYCONF="yes"; ;; esac
+if [ -n "$MYCONF" ]; then
+ einfo "Bootoption myconfig detected." && eend 0
+# Check for given config directory
+ MYCONFDIR="$(getbootparam 'myconfig')"
+ [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'myconfig')"
+fi
+
+# Check for configuration floppy add-on if not running from HD
+if [ -z "$INSTALLED" -a -n "$MYCONF" ]; then
+ FOUND_CONFIG=""
+ if [ -n "$MYCONFDIR" ]; then
+ case "$MYCONFDIR" in
+ /dev/*)
+ MYCONFDEVICE="${MYCONFDIR##/dev/}"
+ MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}"
+ MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}"
+ MYCONFDIR="/mnt/${MYCONFDIR##/dev/}"
+ ;;
+ /mnt/*)
+ MYCONFDEVICE="${MYCONFDIR##/mnt/}"
+ MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}"
+ MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}"
+ ;;
+ [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd])
+ MYCONFDIR="$(findfile grml.sh)"
+ if [ -n "$MYCONFDIR" ]; then
+ MYCONFDEVICE="${MYCONFDIR##/mnt/}"
+ MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}"
+ MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}"
+ MYCONFDIR="${MYCONFMOUNTPOINT}"
+ else
+ FOUND_CONFIG="none"
+ fi
+ ;;
+ *)
+ eerror "Invalid configdir '$MYCONFDIR' specified (must start with /dev/ or /mnt/ or 'scan')." ; eend 1
+ eerror "Option ignored."
+ FOUND_CONFIG="invalid"
+ ;;
+ esac
+ else
+ MYCONFDEVICE="/dev/fd0"
+ MYCONFMOUNTPOINT="/mnt/floppy"
+ MYCONFDIR="/mnt/floppy"
+ fi
+
+ eindent
+ if [ -z "$FOUND_CONFIG" ]; then
+ einfo "Checking ${WHITE}${MYCONFDIR}${NORMAL} for grml configuration files...${NORMAL}"
+ [ -d $MYCONFMOUNTPOINT ] || mkdir $MYCONFMOUNTPOINT && chown grml: $MYCONFMOUNTPOINT
+ if trymount "$MYCONFDEVICE" "$MYCONFMOUNTPOINT"; then
+ MYCONFIG="$(/bin/ls -1d $MYCONFDIR/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+ if [ -n "$MYCONFIG" -a -f "$MYCONFIG" ]; then
+ echo ""
+ FOUND_CONFIG="yes"
+ einfo "Found, now executing ${WHITE}${MYCONFIG}${NORMAL}."
+ echo "6" > /proc/sys/kernel/printk
+ . "$MYCONFIG" "$MYCONFDIR" || true
+ echo "0" > /proc/sys/kernel/printk
+ fi
+ umount "$MYCONFMOUNTPOINT" 2>>$DEBUG
+ fi
+ fi
+ [ -n "$FOUND_CONFIG" ] || eerror "Not present."
+ eoutdent
+fi
+# }}}
+
+# {{{ Check for extra shellscript on CD-ROM (/cdrom/GRML/grml.sh)
+MYCONFIG="$(/bin/ls -1d /cdrom/GRML/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+if [ -n "$MYCONFIG" -a -f "$MYCONFIG" ]; then
+ echo ""
+ FOUND_CONFIG="yes"
+ einfo "grml script/configuration file found on CD, executing ${BLUE}${MYCONFIG}${NORMAL}:"
+ echo "6" > /proc/sys/kernel/printk
+ . "$MYCONFIG" /cdrom/GRML || true
+ echo "0" > /proc/sys/kernel/printk
+fi
+}
+# }}}
+
+# {{{ Check for scripts on CD-ROM
+config_cdrom_scripts(){
+if checkbootparam "script"; then
+ for script in /cdrom/scripts/* ; do
+ einfo " grml script found on CD, executing ${WHITE}${script}${NORMAL}."
+ . $script
+ done
+fi
+}
+# }}}
+
+# {{{ Sound
+config_mixer(){
+if ! [ -x /usr/bin/aumix ] ; then
+ eerror "aumix binary not available. Can not set sound volumes therefore." ; eend 1
+else
+
+ if checkbootparam vol ; then
+ VOL="$(getbootparam 'vol' 2>>$DEBUG)"
+ if [ -z "$VOL" ] ; then
+ eerror "Bootoption vol found but no volume level/parameter given. Using defaults." ; eend 1
+ VOL='75' # default
+ fi
+ else
+ VOL='75' # default
+ fi
+
+ if checkbootparam nosound ; then
+ einfo "Muting sound devices on request."
+ # some IBM notebooks require the following stuff:
+ if [ -x /usr/bin/amixer ] ; then
+ if amixer get Front 1>/dev/null 2>>$DEBUG ; then
+ amixer set Front unmute 1>/dev/null
+ amixer set Front 0% 1>/dev/null
+ fi
+ fi
+ aumix -w 0 -v 0 -p 0 -m 0 ; eend $?
+ elif [ -z "$INSTALLED" ]; then
+ einfo "Setting mixer volumes to level ${WHITE}${VOL}${NORMAL}."
+ # some IBM notebooks require the following stuff:
+ if [ -x /usr/bin/amixer ] ; then
+ if amixer get Front 1>/dev/null 2>>$DEBUG ; then
+ amixer set Front unmute 1>/dev/null
+ amixer set Front ${VOL}% 1>/dev/null
+ fi
+ fi
+ aumix -w $VOL -v $VOL -p $VOL -m $VOL ; eend $?
+ fi
+
+fi
+}
+# }}}
+
+# {{{ modem detection
+config_modem(){
+if checkbootparam "nomodem"; then
+ ewarn "Skipping check for AC97 modem controller as requested on boot commandline." ; eend 0
+else
+ if [ -x /etc/init.d/sl-modem-daemon ] ; then
+ if lspci | grep Intel | grep -q "AC'97 Modem Controller" ; then
+ einfo "AC97 modem controller detected. Starting sl-modem-daemon in background."
+ /etc/init.d/sl-modem-daemon start >>$DEBUG &
+ eend 0
+ fi
+ fi
+fi
+}
+# }}}
+
+# {{{ keyboard add-ons
+config_setkeycodes(){
+if checkbootparam "setkeycodes" ; then
+ einfo "Setting keycodes as requested via bootparameter 'setkeycodes'."
+ # MS MM keyboard add-on
+ # fix
+ setkeycodes e001 126 &>/dev/null
+ setkeycodes e059 127 &>/dev/null
+ # fn keys
+ setkeycodes e03b 59 &>/dev/null
+ setkeycodes e008 60 &>/dev/null
+ setkeycodes e007 61 &>/dev/null
+ setkeycodes e03e 62 &>/dev/null
+ setkeycodes e03f 63 &>/dev/null
+ setkeycodes e040 64 &>/dev/null
+ setkeycodes e041 65 &>/dev/null
+ setkeycodes e042 66 &>/dev/null
+ setkeycodes e043 67 &>/dev/null
+ setkeycodes e023 68 &>/dev/null
+ setkeycodes e057 87 &>/dev/null
+ setkeycodes e058 88 &>/dev/null
+ # hp keycodes
+ setkeycodes e00a 89 e008 90 &>/dev/null
+ eend 0
+fi
+}
+# }}}
+
+# {{{ wondershaper
+config_wondershaper(){
+ if checkbootparam "wondershaper" ; then
+ WONDER="$(getbootparam wondershaper 2>>$DEBUG)"
+ CMD=wondershaper
+ DEVICE=""
+ DOWNSTREAM=""
+ UPSTREAM=""
+ if [ -n "$WONDER" ]; then
+ # Extra options
+ DEVICE="${WONDER%%,*}"
+ R="${WONDER#*,}"
+ if [ -n "$R" -a "$R" != "$WONDER" ]; then
+ WONDER="$R"
+ DOWNSTREAM="${WONDER%%,*}"
+ R="${WONDER#*,}"
+ if [ -n "$R" -a "$R" != "$WONDER" ]; then
+ WONDER="$R"
+ UPSTREAM="${WONDER%%,*}"
+ R="${WONDER#*,}"
+ fi
+ fi
+ fi
+ [ -n "$DEVICE" ] && CMD="$CMD $DEVICE"
+ [ -n "$DOWNSTREAM" ] && CMD="$CMD $DOWNSTREAM"
+ [ -n "$UPSTREAM" ] && CMD="$CMD $UPSTREAM"
+ einfo "Starting wondershaper (${CMD}) in background."
+ ( sh -c $CMD & ) && eend 0
+ fi
+}
+# }}}
+
+# {{{ syslog-ng
+config_syslog(){
+ if checkbootparam "nosyslog"; then
+ ewarn "Not starting syslog-ng as requested on boot commandline." ; eend 0
+ else
+ einfo "Starting syslog-ng in background."
+ /etc/init.d/syslog-ng start 1>>$DEBUG &
+ eend 0
+ fi
+}
+# }}}
+
+# {{{ gpm
+config_gpm(){
+ if checkbootparam "nogpm"; then
+ ewarn "Not starting GPM as requested on boot commandline." ; eend 0
+ else
+ einfo "Starting gpm in background."
+# /etc/init.d/gpm start 1>>$DEBUG &
+ ( while [ ! -e /dev/psaux ]; do sleep 5; done; /etc/init.d/gpm start 1>>$DEBUG ) &
+ eend 0
+ fi
+}
+# }}}
+
+# {{{ services
+config_services(){
+ if checkbootparam "services" ; then
+ SERVICE="$(getbootparam services 2>>$DEBUG)"
+ SERVICELIST=$(echo "$SERVICE" | sed 's/,/\\n/g')
+ SERVICENL=$(echo "$SERVICE" | sed 's/,/ /g')
+ einfo "Starting service(s) ${SERVICENL} in background."
+ for service in $(echo -e $SERVICELIST) ; do
+ /etc/init.d/${service} start 1>>$DEBUG &
+ done
+ [ "$?" == "0" ] ; eend $?
+ fi
+}
+# }}}
+
+# {{{ config files
+config_netconfig(){
+ if checkbootparam netconfig ; then
+ CONFIG="$(getbootparam 'netconfig' 2>>$DEBUG)"
+ CONFIGFILE='/tmp/netconfig.grml'
+
+ getconfig() {
+ wget --timeout=10 --dns-timeout=10 --connect-timeout=10 \
+ --read-timeout=10 $CONFIG -O $CONFIGFILE && return 0 || return 1
+ }
+ einfo "Trying to get ${WHITE}${CONFIG}${NORMAL}"
+ counter=10
+ while ! getconfig && [[ "$counter" != 0 ]] ; do
+ echo -n "Sleeping for 5 seconds and trying to get config again... "
+ counter=$(( counter-1 ))
+ echo "$counter tries left" ; sleep 1
+ done
+ if [ -r "$CONFIGFILE" ] ; then
+ einfo "Downloading was successfull." ; eend 0
+ einfo "md5sum of ${WHITE}${CONFIG}${NORMAL}: "
+ md5sum $CONFIGFILE ; eend 0
+ cd / && einfo "Unpacking ${WHITE}${CONFIGFILE}${NORMAL}:" && /usr/bin/unp $CONFIGFILE $EXTRACTOPTIONS ; eend $?
+ else
+ einfo "Sorry, could not fetch $CONFIG" ; eend 1
+ fi
+ fi
+}
+# }}}
+
+# {{{ blindsound
+config_blindsound(){
+ if checkbootparam "blind" ; then
+ beep
+ flite -o play -t "welcome to the gremel system"
+ fi
+}
+# }}}
+
+# {{{ welcome sound
+config_welcome(){
+ if checkbootparam welcome ; then
+ flite -o play -t "welcome to the gremel system"
+ fi
+}
+# }}}
+
+# {{{ fix/workaround for unionfs
+fix_unionfs(){
+ if [ -z "$INSTALLED" ]; then
+ touch /var/cache/apt/*cache.bin
+ fi
+}
+# }}}
+
+# {{{ create all /mnt-directories
+create_mnt_dirs(){
+ ewarn "create_mnt_dirs is deprecated as grml-rebuildfstab does all we need."
+ ewarn "Please set CONFIG_CREATE_MNT_DIRS='no' in /etc/grml/autoconfig" ; eend 0
+}
+# }}}
+
+# {{{ start X window system via grml-x
+config_x_startup(){
+if checkbootparam startx ; then
+ if [ -x /usr/X11R6/bin/X ] ; then
+ if [ -z "$INSTALLED" ] ; then
+ WINDOWMANAGER="$(getbootparam 'startx' 2>>$DEBUG)"
+ if [ -z "$WINDOWMANAGER" ] ; then
+ einfo "No window manager specified. Taking ${WHITE}wm-ng${NORMAL} as default." && eend 0
+ WINDOWMANAGER="wm-ng"
+ else
+ einfo "Window manager ${WHITE}${WINDOWMANAGER}${NORMAL} found as bootoption." && eend 0
+ fi
+ einfo "Changing to runlevel 5 for starting grml-x ${WINDOWMANAGER}. Just exit X windows system to get full featured consoles."
+ config_userfstab || fstabuser='grml'
+ cat>|/etc/init.d/xstartup<<EOF
+#!/bin/sh
+# su - $fstabuser -c 'grml-x "$WINDOWMANAGER"'
+sudo -u $fstabuser -i /usr/bin/grml-x $WINDOWMANAGER 1>>$DEBUG
+EOF
+ chmod 755 /etc/init.d/xstartup
+ sed -i 's/^allowed_users=.*/allowed_users=anybody/' /etc/X11/Xwrapper.config
+ sed -i 's#^6.*#6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /bin/zsh"#' /etc/inittab
+ /sbin/telinit q ; eend $?
+ else
+ eerror "We are not running from CD - startx will not work, skipping it.
+ Please use something like xdm, gdm or kdm for starting X on a harddisk system!" ; eend 1
+ fi
+ else
+ eerror "/usr/X11R6/bin/X is not present on this grml flavour.
+ Boot parameter startx does not work therefore." ; eend 1
+ fi
+fi
+}
+# }}}
+
+# {{{ configuration framework
+config_extract(){
+if checkbootparam extract ; then
+ EXTRACT="$(getbootparam 'extract' 2>>$DEBUG)"
+ EXTRACTOPTIONS="-- -x $EXTRACT"
+fi
+}
+
+config_automount(){
+if checkbootparam noautoconfig ; then
+ ewarn "Skipping running automount of device(s) labeled GRMLCFG as requested." ; eend 0
+else
+ if [ -z "$INSTALLED" ] ; then
+ einfo "Searching for device(s) labeled with GRMLCFG." ; eend 0
+ eindent
+ [ -d /mnt/grml ] || mkdir /mnt/grml
+ umount /mnt/grml 1>>$DEBUG 2>&1 # make sure it is not mounted
+# We do need the following fix so floppy disk is available to blkid in any case :-/
+ if [ -r /dev/fd0 ] ; then
+ einfo "Floppy device detected. Trying to access floppy disk. (Disable this via boot option: noautoconfig)"
+# dd if=/dev/fd0 of=/dev/null bs=512 count=1 1>>$DEBUG 2>&1
+ if timeout 4 dd if=/dev/fd0 of=/dev/null bs=512 count=1 1>>$DEBUG 2>&1 ; then
+ blkid /dev/fd0 1>>$DEBUG 2>&1
+ fi
+ fi
+ DEVICE=$(blkid -t LABEL=GRMLCFG | head -1 | awk -F: '{print $1}')
+ [ -n "$DEVICE" ] && mount -t auto -o ro $DEVICE /mnt/grml ; RC="$?"
+ if [[ $RC == 0 ]]; then
+ einfo "Mounting device $DEVICE labeled GRMLCFG succeeded." ; eend 0
+
+ CONFIG=''
+ CONFIG="$(/bin/ls -1d /mnt/grml/[Cc][Oo][Nn][Ff][Ii][Gg].[Tt][Bb][Zz] 2>>$DEBUG)"
+ if [ -n "$CONFIG" ]; then
+ einfo "Found file ${WHITE}${CONFIG}${NORMAL} - trying to extract it."
+ cd /
+ unp $CONFIG $EXTRACTOPTIONS ; eend $?
+ else
+ ewarn "Sorry, could not find file config.tbz on device with label GRMLCFG." ; eend 1
+ fi
+
+ SCRIPT=''
+ SCRIPT="$(/bin/ls -1d /mnt/grml/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+ if [ -n "$SCRIPT" ]; then
+ einfo "Found script ${WHITE}${SCRIPT}${NORMAL} - trying to execute it."
+ $SCRIPT ; eend $?
+ fi
+ grep -q '/mnt/grml' /proc/mounts && umount /mnt/grml
+ else
+ ewarn "No devices with label GRMLCFG found." ; eend 0
+ fi
+ eoutdent
+ fi
+fi
+}
+
+config_myconfig(){
+if checkbootparam myconfig ; then
+ MOUNTDEVICE="$(getbootparam 'myconfig' 2>>$DEBUG)"
+ if [ -n "$MOUNTDEVICE" ]; then
+ if checkbootparam file ; then
+ FILENAME="$(getbootparam 'file' 2>>$DEBUG)"
+ [ -n "$FILENAME" ] || FILENAME='config.tbz'
+ fi
+ [ -d /mnt/grml ] || mkdir /mnt/grml
+ umount /mnt/grml 1>>$DEBUG 2>&1 # make sure it is not mounted
+ mount -o ro -t auto $MOUNTDEVICE /mnt/grml ; RC="$?"
+ if [[ $RC == 0 ]]; then
+ einfo "Successfully mounted $MOUNTDEVICE to /mnt/grml (readonly)." ; eend 0
+ eindent
+ CONFIG=''
+ CONFIG="$(/bin/ls -1d /mnt/grml/[Cc][Oo][Nn][Ff][Ii][Gg].[Tt][Bb][Zz] 2>>$DEBUG)"
+ if [ -n "$CONFIG" ]; then
+ einfo "Found file ${WHITE}${CONFIG}${NORMAL} - trying to extract it."
+ cd /
+ unp $CONFIG $EXTRACTOPTIONS ; eend $?
+ else
+ ewarn "Sorry, could not find file config.tbz on device with label GRMLCFG." ; eend 1
+ fi
+
+ SCRIPT=''
+ SCRIPT="$(/bin/ls -1d /mnt/grml/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+ if [ -n "$SCRIPT" ]; then
+ einfo "Found script ${WHITE}${SCRIPT}${NORMAL} - trying to execute it."
+ $SCRIPT ; eend $?
+ fi
+ eoutdent
+ else
+ einfo "Could not mount $MOUNTDEVICE to /mnt/grml - sorry." ; eend 1
+ fi # mount $MOUNTDEVICE
+ grep -q '/mnt/grml' /proc/mounts && umount /mnt/grml
+ else
+ einfo "Sorry, no device for bootoption myconfig provided. Skipping." ; eend 1
+ fi # [ -n "$MOUNTDEVICE" ]
+fi # checkbootparam myconfig
+
+if checkbootparam "partconf" ; then
+ MOUNTDEVICE="$(getbootparam 'partconf' 2>>$DEBUG)"
+ if [ -n "$MOUNTDEVICE" ]; then
+ [ -d /mnt/grml ] || mkdir /mnt/grml
+ mount -o ro -t auto $MOUNTDEVICE /mnt/grml ; RC="$?"
+ if [[ $RC == 0 ]]; then
+ einfo "Successfully mounted $MOUNTDEVICE to /mnt/grml (readonly)." ; eend 0
+ einfo "Copying files from $MOUNTDEVICE over grml system."
+ for file in `cat /etc/grml/partconf` ; do
+ [ -d /mnt/grml/$file ] && cp -a /mnt/grml/${file}* ${file} && echo "copied: $file"
+ [ -f /mnt/grml/$file ] && cp -a /mnt/grml/${file} ${file} && echo "copied: $file"
+ done && eend 0
+ else
+ einfo "Could not mount $MOUNTDEVICE to /mnt/grml - sorry." ; eend 1
+ fi # mount $MOUNTDEVICE
+ grep -q '/mnt/grml' /proc/mounts && umount /mnt/grml
+ else
+ einfo "Sorry, no device for bootoption partconf provided. Skipping." ; eend 1
+ fi # [ -n "$MOUNTDEVICE" ]
+fi
+}
+# }}}
+
+# {{{ /cdrom/.*-options
+config_debs(){
+if checkbootparam "debs" ; then
+ DEBS="$(getbootparam 'debs' 2>>$DEBUG)"
+ [ -z "$CONFIG" ] && CONFIG="/cdrom/debs/*"
+ einfo "Tring to install debian package(s) ${DEBS}:"
+ dpkg -i /cdrom/debs/$DEBS* ; eend $?
+fi
+}
+
+config_config(){
+if checkbootparam "config" ; then
+ CONFIG="$(getbootparam 'config' 2>>$DEBUG)"
+ [ -z "$CONFIG" ] && CONFIG='config.tbz'
+ einfo "Bootoption config found. config is set to: $CONFIG"
+ eindent
+ einfo "Trying to extract configuration file ${CONFIG}:"
+ cd / && unp /cdrom/config/$CONFIG $EXTRACTOPTIONS ; eend $?
+ eoutdent
+fi
+}
+
+config_scripts(){
+if checkbootparam "scripts" ; then
+ SCRIPTS="$(getbootparam 'scripts' 2>>$DEBUG)"
+ [ -z "$SCRIPTS" ] && SCRIPTS='grml.sh'
+ einfo "Bootparameter scripts found. Trying to execute ${SCRIPTS}:"
+ sh -c /cdrom/scripts/$SCRIPTS ; eend $?
+fi
+}
+# }}}
+
+# {{{ distcc
+config_distcc(){
+if checkbootparam "distcc" ; then
+ OPTIONS="$(getbootparam distcc 2>>$DEBUG)"
+ if [ -n "$OPTIONS" ]; then
+ NET=""
+ INTERFACE=""
+ if [ -n "$OPTIONS" ]; then
+ NET="${OPTIONS%%,*}"
+ R="${OPTIONS#*,}"
+ if [ -n "$R" -a "$R" != "$OPTIONS" ]; then
+ OPTIONS="$R"
+ INTERFACE="${OPTIONS%%,*}"
+ R="${OPTIONS#*,}"
+ fi
+ fi
+ fi
+ CONFIG=/etc/default/distcc
+ sed -i "s#^STARTDISTCC=.*#STARTDISTCC=YES#" $CONFIG
+ sed -i "s#^ALLOWEDNETS=.*#ALLOWEDNETS=$NET#" $CONFIG
+
+ if [ -n "$INTERFACE" ] ; then
+ IP=$(LANG=C ifconfig $INTERFACE | gawk -F: /"inet addr"/'{print $2}' | gawk '{print $1}')
+
+ counter=10
+ while [ -z "$IP" ] && [[ "$counter" != 0 ]] ; do
+ counter=$(( counter-1 ))
+ ewarn "No ip address for $INTERFACE found. Sleeping for 3 seconds. $counter tries left."
+ sleep 3
+ IP=$(LANG=C ifconfig $INTERFACE | gawk -F: /"inet addr"/'{print $2}' | gawk '{print $1}')
+ done
+ fi
+
+ if [ -n "$IP" ] ; then
+ sed -i "s#^LISTENER=.*#LISTENER=$IP#" $CONFIG
+
+ einfo "Bootoption distcc found. Preparing setup for distcc daemon."
+ eindent
+ id distccd >/dev/null 2>&1 || \
+ (
+ einfo "Creating distcc user" ; \
+ adduser --quiet --system --ingroup nogroup --home / --no-create-home distccd ; eend $?
+ )
+
+ einfo "Starting distcc for network ${NET}, listening on ${IP}."
+ /etc/init.d/distcc start 1>/dev/null ; eend $?
+ eoutdent
+ else
+ eerror "No ip address for $INTERFACE found. distcc can not be used without it." ; eend 1
+ fi
+fi
+
+if checkbootparam "gcc"; then
+ GCC="$(getbootparam gcc 2>>$DEBUG)"
+ eindent
+ einfo "Pointing /usr/bin/gcc to /usr/bin/gcc-${GCC}."
+ eoutdent
+ rm -f /usr/bin/gcc
+ ln -s /usr/bin/gcc-${GCC} /usr/bin/gcc ; eend $?
+fi
+
+if checkbootparam "gpp"; then
+ GPP="$(getbootparam gpp 2>>$DEBUG)"
+ eindent
+ einfo "Pointing /usr/bin/g++ to /usr/bin/g++-${GPP}."
+ if [ -x /usr/bin/g++-${GPP} ] ; then
+ rm -f /usr/bin/g++
+ ln -s /usr/bin/g++-${GPP} /usr/bin/g++ ; eend $?
+ fi
+ einfo "Pointing /usr/bin/cpp to /usr/bin/cpp-${GPP}."
+ if [ -x /usr/bin/cpp-${GPP} ] ; then
+ rm -f /usr/bin/cpp
+ ln -s /usr/bin/cpp-${GPP} /usr/bin/cpp ; eend $?
+ fi
+ eoutdent
+fi
+
+}
+# }}}
+
+# {{{ load modules
+# Notice: use it only on live-cd system, if running from harddisk please
+# add modules to /etc/modules and activate /etc/init.d/module-init-tools
+# in /etc/runlevel.conf
+config_modules(){
+MODULES_FILE=/etc/grml/modules
+if checkbootparam nomodules ; then
+ ewarn "Skipping loading of modules defined in ${MODULES_FILE} as requested." ; eend 0
+elif [ -z "$INSTALLED" ]; then
+ if [ -r $MODULES_FILE ] ; then
+ einfo "Loading modules specified in ${MODULES_FILE}:"
+ eindent
+ grep '^[^#]' $MODULES_FILE | \
+ while read module args; do
+ [ "$module" ] || continue
+ einfo "${module}"
+ modprobe $module $args ; eend $?
+ done
+ eoutdent
+ else
+ ewarn "File $MODULES_FILE does not exist. Skipping loading of specific modules." ; eend 1
+ fi
+fi
+}
+# }}}
+
+# {{{ 915resolution
+config_915resolution(){
+if checkbootparam "915resolution" ; then
+ OPTIONS="$(getbootparam 915resolution 2>>$DEBUG)"
+ if [ -x /usr/sbin/915resolution ]; then
+ CMD=915resolution
+ MODE=""
+ XRESO=""
+ YRESO=""
+ if [ -n "$OPTIONS" ]; then
+ # Extra options
+ MODE="${OPTIONS%%,*}"
+ R="${OPTIONS#*,}"
+ if [ -n "$R" -a "$R" != "$OPTIONS" ]; then
+ OPTIONS="$R"
+ XRESO="${OPTIONS%%,*}"
+ R="${OPTIONS#*,}"
+ if [ -n "$R" -a "$R" != "$OPTIONS" ]; then
+ OPTIONS="$R"
+ YRESO="${OPTIONS%%,*}"
+ R="${OPTIONS#*,}"
+ fi
+ fi
+ fi
+ einfo "Running 915resolution with options ${MODE} ${XRESO} ${YRESO}."
+ [ -n "$MODE" ] && [ -n "$XRESO" ] && [ -n "$YRESO" ] && ( sh -c "$CMD $MODE $XRESO $YRESO" & )
+ eend 0
+ fi
+fi
+}
+# }}}
+
+# {{{ debnet: setup network based on an existing one found on a partition
+config_debnet(){
+if checkbootparam "debnet" ; then
+ iszsh && setopt shwordsplit
+ DEVICES="$(< /proc/partitions tail -n +3 | awk '{print "/dev/"$4}' | tr "\n" " ")"
+ DEVICES="$DEVICES $(ls /dev/mapper/*)"
+ FOUND_DEBNET=""
+
+ einfo "Bootoption 'debnet' found. Searching for Debian network configuration: "
+ eindent
+ if ! mount | grep '/mnt ' 1>/dev/null 2>&1 ; then
+ for i in $DEVICES; do
+ if mount -o ro -t auto "$i" /mnt >/dev/null 2>&1; then
+ einfo "Scanning on $i"
+ if [ -f /mnt/etc/network/interfaces ]; then
+ einfo "/etc/network/interfaces found on ${i}" ; eend 0
+ FOUND_DEBNET="$i"
+ break
+ fi
+ umount /mnt
+ fi
+ done
+
+ if [ -n "$FOUND_DEBNET" ]; then
+ einfo "Stopping network."
+ pump -k 1>/dev/null 2>&1
+ /etc/init.d/networking stop 1>/dev/null 2>&1 ; eend $?
+ einfo "Copying Debian network configuration from $FOUND_DEBNET to running system."
+ rm -rf /etc/network/run
+ cp -a /mnt/etc/network /etc
+ rm -rf /etc/network/run
+ mkdir /etc/network/run
+ umount /mnt ; eend $?
+ einfo "Starting network."
+ /etc/init.d/networking start ; eend $?
+ else
+ eerror "/etc/network/interfaces not found." ; eend 1
+ fi
+ eoutdent
+ else
+ eerror "Error: /mnt already mounted." ; eend 1
+ fi
+fi
+}
+# }}}
+
+# {{{ disable console blanking
+config_blanking(){
+if checkbootparam "noblank" ; then
+ einfo "Bootoption noblank found. Disabling monitor blanking."
+ setterm -blank 0 ; eend $?
+fi
+}
+# }}}
+
+# {{{ grml2hd: automatic installation
+config_grml2hd(){
+
+if checkbootparam "user" ; then
+ NEWUSER=''
+ NEWUSER="$(getbootparam 'user' 2>>$DEBUG)"
+ sed -i "s/^NEWUSER=.*/NEWUSER=$NEWUSER/" /etc/grml2hd/config || export GRML2HD_FAIL=1
+fi
+
+if checkbootparam "filesystem" ; then
+ FILESYSTEM=''
+ FILESYSTEM="$(getbootparam 'filesystem' 2>>$DEBUG)"
+ sed -i "s/^FILESYSTEM=.*/FILESYSTEM=$FILESYSTEM/" /etc/grml2hd/config || export GRML2HD_FAIL=1
+fi
+
+if checkbootparam "partition" ; then
+ PARTITION=''
+ PARTITION="$(getbootparam 'partition' 2>>$DEBUG)"
+ # notice: the following checks whether the given partition is available, if not the skip
+ # execution of grml2hd as it might result in data loss...
+ if [ -r $PARTITION ] ; then
+ sed -i "s#^PARTITION=.*#PARTITION=$PARTITION#" /etc/grml2hd/config || export GRML2HD_FAIL=1
+ else
+ ewarn "Partition $PARTITION does not exist. Skipping execution of grml2hd therefore." ; eend 1
+ fi
+fi
+
+if checkbootparam "mbr" ; then
+ BOOT_PARTITION=''
+ BOOT_PARTITION="$(getbootparam 'mbr' 2>>$DEBUG)"
+ sed -i "s#^BOOT_PARTITION=.*#BOOT_PARTITION=$BOOT_PARTITION#" /etc/grml2hd/config || export GRML2HD_FAIL=1
+fi
+
+if stringinstring "BOOT_IMAGE=grml2hd " "$CMDLINE" ; then
+ cat>|/usr/bin/grml2hd_noninteractive<<EOF
+#!/bin/sh
+GRML2HD_NONINTERACTIVE='yes' grml2hd
+EOF
+ chmod 755 /usr/bin/grml2hd_noninteractive
+ einfo "Bootparameter grml2hd found. Running automatic installation via grml2hd using /etc/grml2hd/config." && eend 0
+ if [ -z "$GRML2HD_FAIL" ] ; then
+ screen /usr/bin/grml2hd_noninteractive ; einfo "Invoking a shell, just exit to continue booting..." ; /bin/zsh
+ else
+ ewarn "There was an error adjusting /etc/grml2hd/config. Skipping execution of grml2hd for security reasons." ; eend 1
+ fi
+fi
+}
+# }}}
+
+### {{{ backwards compatible stuff
+config_environment(){
+ ewarn "config_environment is deprecated. Please set CONFIG_ENVIRONMENT in /etc/grml/autoconfig to 'no'." ; eend 0
+}
+config_running_from() {
+ ewarn "config_running_from is deprecated. Please set CONFIG_RUNNING_FROM in /etc/grml/autoconfig to 'no'." ; eend 0
+}
+config_keyboard(){
+ ewarn "config_keyboard is deprecated. Please set CONFIG_KEYBOARD in /etc/grml/autoconfig to 'no'." ; eend 0
+}
+# }}}
+
+## END OF FILE #################################################################
+# vim:foldmethod=marker
--- /dev/null
+# Filename: /etc/grml/autoconfig.small
+# Purpose: configuration for grml-autoconfig on grml-small-system
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Sam Sep 23 20:06:34 CEST 2006 [mika]
+################################################################################
+
+################################################################################
+# Notice: you can configure grml-autoconfig via adjusting the following values.
+# Set them to 'yes' to activate them. But please notice that some options
+# require an additional bootparam ("cheatcode") anyway, some options just
+# de-/activate a check!
+#
+# If you want to deactivate an option just set it to 'no'.
+#
+# Take a look at the script 'grml-autoconfig' as well!
+################################################################################
+
+## These are the options you might want to adjust: #############################
+
+# configure language - set keyboard layout
+# notice: overwriting this variable is still possible through
+# bootparameter lang=...
+# See http://grml.org/faq/#language for more information.
+# default: us
+# LANGUAGE='de'
+
+# console font
+# default: Lat15-Terminus16
+# CONSOLEFONT='iso15graf-16'
+
+# display information on running kernel
+CONFIG_KERNEL='yes'
+
+# check for network devices and run dhclient
+CONFIG_DHCP='yes'
+
+# check for frequency-scalable CPU and activate cpydyn/powernowd
+CONFIG_CPU='no'
+
+# create /etc/fstab (this also de-/activates swap-partition)
+CONFIG_FSTAB='yes'
+
+# load ACPI/APM modules
+CONFIG_ACPI_APM='yes'
+
+# Enable DMA for all IDE drives - already done in initrd
+# but make sure it's done also on harddisk-installed systems
+CONFIG_DMA='yes'
+
+# set audio volumes
+CONFIG_MIXER='no'
+
+# start syslog-ng
+CONFIG_SYSLOG='yes'
+
+# start gpm
+CONFIG_GPM='yes'
+
+################################################################################
+# Notice! Do not touch the following options except you really know
+# what you are doing!
+CONFIG_915RESOLUTION='no' # run 915resolution with specified options for adjusting resolution
+CONFIG_AGP='yes' # check for bootparam forceagp
+CONFIG_AUTOMOUNTER='no' # activate automounter
+CONFIG_AUTOMOUNT='yes' # automounting of device labeled GRMLCFG
+CONFIG_BLANKING='yes' # check for bootoption noblank to disable console blanking
+CONFIG_BLINDSOUND='yes' # play 'beep' and play welcome message
+CONFIG_BLIND='yes' # check for blind option or brltty
+CONFIG_CDROM_PERM='yes' # for burning on IDE-CD-Roms, k3b (and others) check for special permissions
+CONFIG_CDROM_SCRIPTS='yes' # run scripts from /cdrom/scripts
+CONFIG_CONSOLE='yes' # activate mgetty when using console=... as bootparam
+CONFIG_CREATE_MNT_DIRS='no' # create /mnt-directories
+CONFIG_DEBNET='yes' # search for /etc/network/interfaces on partitions and set up network afterwards
+CONFIG_DEBUG='yes' # activate start of shells during startup at several stages
+CONFIG_DISCOVER='no' # use discover for hardware detection
+CONFIG_DISTCC='no' # activate and setup distcc through bootparam distcc=$NETWORK,$INTERFACE
+CONFIG_EXTRACT='yes' # specify which (only in combination with bootparam myconfig/netconfig useful)
+CONFIG_FAST='yes' # skip startup of w3m on tty1
+CONFIG_FIREWIRE_DEV='no' # bugfix for kernel >=2.6.11 - create some firewire-devices
+CONFIG_FIX_PASSWD='yes' # fix unionfs-problem with passwd
+CONFIG_FIX_UNIONFS='yes' # fix/workaround for unionfs
+CONFIG_USERFSTAB='yes' # check for username of uid 1000
+CONFIG_FWTIMEOUT='yes' # set timeout for firmware loading
+CONFIG_GRML2HD='yes' # check for 'grml2hd' bootoption
+CONFIG_HOMEDIR='yes' # check for persistent homedir option
+CONFIG_HOSTNAME='yes' # set hostname to 'grml' on systems running from CD
+CONFIG_HOTPLUG_MAIN='no' # start hotplug system [should be handled by udev now]
+CONFIG_HOTPLUG_AGENT='no' # deactivate specific hotplug agent(s) via bootparam
+CONFIG_HOTPLUG_BLACKLIST='no' # check for blacklist bootparam
+CONFIG_HWINFO='no' # run hwinfo for module-detection (requires bootparam 'hwinfo'!)
+CONFIG_INTERACTIVE='yes' # check for expert-mode as bootparam
+CONFIG_LANGUAGE='yes' # allow language specification via commandline
+CONFIG_LD_MOD='yes' # run ldconfig and depmod on systems running from harddisk; remove /etc/grml.first.boot for forcing
+CONFIG_LOCAL_NET='yes' # bring up loopback interface
+CONFIG_LOG='yes' # DEBUG=/dev/null or logfile int /tmp/...
+CONFIG_MODEM='yes' # check for AC'97 Modem Controller modem
+CONFIG_MODULES='yes' # load modules specified in /etc/grml/modules
+CONFIG_MOUSE='yes' # show mouse information (expert-mode)
+CONFIG_MYCONFIG='yes' # check if we want the config floppy
+CONFIG_NETCONFIG='yes' # download configuration archive provided by bootoption netconfig=...
+CONFIG_NETIPV6='yes' # check for bootparam ipv6
+CONFIG_PASSWD='yes' # set password via bootparam passwd
+CONFIG_PCMCIA='no' # check for pcmcia and start cardmgr
+CONFIG_SERVICES='yes' # check for services to run, provided via bootparam
+CONFIG_SETKEYCODES='yes' # run setkeycodes when bootoption setkeycodes found
+CONFIG_SMALL='yes' # use a less "bloat" /etc/inittab for small computer with less RAM
+CONFIG_SPLASH='no' # bootsplash
+CONFIG_SSH='yes' # check for bootparam ssh
+CONFIG_SWSPEAK='no' # run software synthesizer via speakup
+CONFIG_TESTCD='yes' # CD checker
+CONFIG_TIME='yes' # set clock, check for bootparam utc/gmt [only in live-mode]
+CONFIG_TIMEZONE='yes' # get bootparam 'tz' and set it as /etc/localtime [only in live-mode]
+CONFIG_VMWARE='no' # vmware specific stuff (use xorg.conf.vmware)
+CONFIG_WELCOME='yes' # play welcome sound (audio)
+CONFIG_WONDERSHAPER='yes' # start wondershaper with options provided via bootparam
+CONFIG_XSTARTUP='no' # start X window system via grml-x
+## END OF FILE #################################################################
--- /dev/null
+grml-autoconfig (0.5-15) unstable; urgency=low
+
+ * config_language: duplicate the getbootparam keyboard code to make
+ sure /etc/grml/language-functions does not overwrite our values...
+
+ -- Michael Prokop <mika@grml.org> Thu, 12 Oct 2006 13:00:17 +0200
+
+grml-autoconfig (0.5-14) unstable; urgency=low
+
+ * Check for existence of
+ /usr/share/consolefonts/Lat15-Terminus16.psf.gz
+
+ -- Michael Prokop <mika@grml.org> Sat, 7 Oct 2006 23:37:28 +0200
+
+grml-autoconfig (0.5-13) unstable; urgency=low
+
+ * Don't export $COUNTRY and $CHARSET anymore.
+
+ -- Michael Prokop <mika@grml.org> Wed, 4 Oct 2006 10:39:24 +0200
+
+grml-autoconfig (0.5-12) unstable; urgency=low
+
+ * Change 'chown grml.grml ...' into 'chown grml: ...'. Thanks, Worf!
+ * Remove /etc/sysconfig/.
+
+ -- Michael Prokop <mika@grml.org> Thu, 28 Sep 2006 16:30:42 +0200
+
+grml-autoconfig (0.5-11) unstable; urgency=low
+
+ * Use KEYTABLE="gr-utf8" for greek-utf8.
+ * grml-autoconfig script: change keyboard into language.
+
+ -- Michael Prokop <mika@grml.org> Mon, 25 Sep 2006 10:23:04 +0200
+
+grml-autoconfig (0.5-10) unstable; urgency=low
+
+ * Rewrote language code:
+ - support $LANG-utf8
+ - use the script grml-setlang instead of output variable to
+ /etc/environment and /etc/sysconfig/*
+ - use CHARSET="iso8859-15" by default, support some new languages
+ - config_environment, config_running_from and config_keyboard
+ are deprecate now
+ * Removed discover from Suggests and added alsa-utils instead.
+ * Check for presence of aumix and amixer binaries in config_mixer.
+ * Cleanup of "doubled logic checks" like
+ "if ! [ -z ..." => "if [ -n ..."].
+ * Check whether a swap partition is used already and inform user
+ about it. Support LABELs as well.
+
+ -- Michael Prokop <mika@grml.org> Sat, 23 Sep 2006 12:10:32 +0200
+
+grml-autoconfig (0.5-9) unstable; urgency=low
+
+ * Use "amixer get Front" in config_mixer so the IBM notebooks
+ have sound by default as well. Thanks Jimmy for debugging
+ and code-base!
+
+ -- Michael Prokop <mika@grml.org> Sun, 17 Sep 2006 16:29:28 +0200
+
+grml-autoconfig (0.5-8) unstable; urgency=low
+
+ * Check for lo device in /etc/network/run/ifstate before
+ running "ifup lo".
+ * Clean /etc/network/status/ before writing into it.
+ * Change { pump... } into ( pump... ).
+
+ -- Michael Prokop <mika@grml.org> Sat, 16 Sep 2006 15:08:30 +0200
+
+grml-autoconfig (0.5-7) unstable; urgency=low
+
+ * Move /etc/grml/lsb-functions to package grml-etc-core.
+
+ -- Michael Prokop <mika@grml.org> Sat, 16 Sep 2006 11:03:43 +0200
+
+grml-autoconfig (0.5-6) unstable; urgency=low
+
+ * Write status of pump into /etc/network/status/$DEVICE.
+
+ -- Michael Prokop <mika@grml.org> Fri, 15 Sep 2006 18:44:35 +0200
+
+grml-autoconfig (0.5-5) unstable; urgency=low
+
+ * Set CONFIG_CREATE_MNT_DIRS=no and warn when create_mnt_dirs()
+ is executed as grml-rebuildfstab does all we need from now on.
+
+ -- Michael Prokop <mika@grml.org> Mon, 11 Sep 2006 21:39:56 +0200
+
+grml-autoconfig (0.5-4) unstable; urgency=low
+
+ * Deactivate creation of /mnt/*-directories as grml-rebuildfstab
+ >= 0.3-1 takes care of it. Depend on grml-rebuildfstab package
+ >= 0.3-1 therefore.
+
+ -- Michael Prokop <mika@grml.org> Mon, 11 Sep 2006 15:51:22 +0200
+
+grml-autoconfig (0.5-3) unstable; urgency=low
+
+ * Run chpasswd with '-m' option.
+
+ -- Michael Prokop <mika@grml.org> Tue, 15 Aug 2006 12:35:54 +0200
+
+grml-autoconfig (0.5-2) unstable; urgency=low
+
+ * Run 'ifup lo' only in live-cd mode...
+
+ -- Michael Prokop <mika@grml.org> Sat, 12 Aug 2006 14:08:32 +0200
+
+grml-autoconfig (0.5-1) unstable; urgency=low
+
+ * Bumb version, grml 0.8 is coming closer...
+
+ -- Michael Prokop <mika@grml.org> Fri, 11 Aug 2006 11:48:44 +0200
+
+grml-autoconfig (0.4-33) unstable; urgency=low
+
+ * Use ifup instead of ifconfig for bringing up lo in
+ config_local_net().
+
+ -- Michael Prokop <mika@grml.org> Thu, 10 Aug 2006 09:14:51 +0200
+
+grml-autoconfig (0.4-32) unstable; urgency=low
+
+ * Drop unused config_splash().
+
+ -- Michael Prokop <mika@grml.org> Fri, 4 Aug 2006 12:14:50 +0200
+
+grml-autoconfig (0.4-31) unstable; urgency=low
+
+ * Use "timeout 4" when running dd on floppy drive. Thanks, Gebi!
+
+ -- Michael Prokop <mika@grml.org> Fri, 4 Aug 2006 10:12:34 +0200
+
+grml-autoconfig (0.4-30) unstable; urgency=low
+
+ * Check for running hal/d-bus and warn in acpid sequence then.
+ * Improved apm-stuff in config_acpi_apm.
+
+ -- Michael Prokop <mika@grml.org> Fri, 21 Jul 2006 13:06:52 +0200
+
+grml-autoconfig (0.4-29) unstable; urgency=low
+
+ * Moved generic $LANGUAGE stuff into its own file named
+ /etc/grml/language-functions so we can source the file
+ in grml-autoconfig and grml-scripts without having to
+ maintain it in several places.
+ * Write $LANG-stuff in config_environment to /etc/default/locales
+ if the file does not exist yet.
+
+ -- Michael Prokop <mika@grml.org> Tue, 18 Jul 2006 19:59:47 +0200
+
+grml-autoconfig (0.4-28) unstable; urgency=low
+
+ * Send errors to $DEBUG in checkgrmlsmall() and checkgrmlusb()
+ as there are people out there using grml-autoconfig on plain
+ Debian systems where /etc/grml_version does not exist. :)
+
+ -- Michael Prokop <mika@grml.org> Tue, 18 Jul 2006 18:41:51 +0200
+
+grml-autoconfig (0.4-27) unstable; urgency=low
+
+ * The "oh, I love GNU" Release.
+ * Adjusted tail command to get rid of the "Warning: "+number" syntax is
+ deprecated, please use "-n +number"".
+ * Added $CONFIG_BLANKING to disable console blanking (on request
+ by Marc 'Zugschlus' Haber).
+ * Added header to be Init Script LSB-compliant, see
+ http://wiki.debian.org/LSBInitScripts for details.
+
+ -- Michael Prokop <mika@grml.org> Fri, 7 Jul 2006 21:58:57 +0200
+
+grml-autoconfig (0.4-26) unstable; urgency=low
+
+ * Added support for /etc/init.d/boolocal.{pre,middle,post}.
+ * Added manpage grml-bootsplash.1.
+ * grml-bootsplash: switched to /bin/bash to make lintian happy,
+ improved error handling as well.
+
+ -- Michael Prokop <mika@grml.org> Sun, 4 Jun 2006 14:03:00 +0200
+
+grml-autoconfig (0.4-25) unstable; urgency=low
+
+ * Added textbased bootsplash support based on contribution
+ by Florian Keller <Florian.Keller@zuerich.ch>, thanks!
+ * Run language stuff at the beginning so the fonts are
+ switched earlier.
+
+ -- Michael Prokop <mika@grml.org> Sat, 27 May 2006 11:23:15 +0200
+
+grml-autoconfig (0.4-24) unstable; urgency=low
+
+ * Reorderd $KEYTABLE check in config_environment.
+
+ -- Michael Prokop <mika@grml.org> Sun, 14 May 2006 21:30:47 +0200
+
+grml-autoconfig (0.4-23) unstable; urgency=low
+
+ * Added '-m' option to consolechars call.
+
+ -- Michael Prokop <mika@grml.org> Sun, 14 May 2006 17:13:40 +0200
+
+grml-autoconfig (0.4-22) unstable; urgency=low
+
+ * Moved check for bootoption [x]keyboard=... to config_environment.
+
+ -- Michael Prokop <mika@grml.org> Sun, 14 May 2006 16:59:34 +0200
+
+grml-autoconfig (0.4-21) unstable; urgency=low
+
+ * Adjust KEYTABLE of bootoption keyboard=de/at via
+ /etc/sysconfig/keyboard, otherwise we've a racecondition.
+ * Reworked charset code to run it on all tty's.
+
+ -- Michael Prokop <mika@grml.org> Sun, 14 May 2006 12:18:24 +0200
+
+grml-autoconfig (0.4-20) unstable; urgency=low
+
+ * The 'oh, we are lintian-clean again even though #360534' Release.
+
+ -- Michael Prokop <mika@grml.org> Fri, 12 May 2006 21:48:30 +0200
+
+grml-autoconfig (0.4-19) unstable; urgency=low
+
+ * Take KEYTABLE="de-latin1-nodeadkeys" for bootoptions keyboard=de
+ and keyboard=at.
+
+ -- Michael Prokop <mika@grml.org> Fri, 12 May 2006 21:32:21 +0200
+
+grml-autoconfig (0.4-18) unstable; urgency=low
+
+ * Added pump to depends. Thanks, Florian Keller!
+
+ -- Michael Prokop <mika@grml.org> Fri, 5 May 2006 13:01:11 +0200
+
+grml-autoconfig (0.4-17) unstable; urgency=low
+
+ * Support multiline settings in /cdrom/bootparams/*. Patch
+ contributed by Florian Keller, thanks!
+
+ -- Michael Prokop <mika@grml.org> Thu, 4 May 2006 22:48:43 +0200
+
+grml-autoconfig (0.4-16) unstable; urgency=low
+
+ * Adjusted $XKEYBOARD and $KDEKEYBOARD as suggested by
+ Florian Keller, thanks!
+
+ -- Michael Prokop <mika@grml.org> Wed, 3 May 2006 09:37:44 +0200
+
+grml-autoconfig (0.4-15) unstable; urgency=low
+
+ * Move $CMDLINE before the checkbootparam "nocolor" code.
+ Switch order of display and sourcing lsb-functions.
+ * Don't run bootlogd via initscript as startup might be
+ prevented via /etc/default/bootlogd.
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 16:10:29 +0200
+
+grml-autoconfig (0.4-14) unstable; urgency=low
+
+ * grml-autoconfig script reads in current state of options now.
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 14:55:57 +0200
+
+grml-autoconfig (0.4-13) unstable; urgency=low
+
+ * Removed config_color as it is handled when sourcing lsb-functions.
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 13:01:54 +0200
+
+grml-autoconfig (0.4-12) unstable; urgency=low
+
+ * Use consolechars instead of charset for $CHARMAP.
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 12:02:39 +0200
+
+grml-autoconfig (0.4-11) unstable; urgency=low
+
+ * Fixed wrong logic of nocolor check.
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 11:49:46 +0200
+
+grml-autoconfig (0.4-10) unstable; urgency=low
+
+ * Check for bootoption nocolor and source
+ /etc/grml/lsb-functions with RC_NOCOLOR=yes then.
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 01:00:03 +0200
+
+grml-autoconfig (0.4-9) unstable; urgency=low
+
+ * Fixed bootlogd problems, now we are starting it through the
+ init script.
+ * Fixed problem with loading charset because of using the
+ wrong variable. Thanks to Maciej 'harnir' Delmanowski!
+
+ -- Michael Prokop <mika@grml.org> Sun, 30 Apr 2006 00:01:49 +0200
+
+grml-autoconfig (0.4-8) unstable; urgency=low
+
+ * reworked language section
+ - improve indenting of case $LANGUAGE code...
+ - use Lat15-Terminus16 as default console font if
+ bootoption "nodefaultfont" isn't used, depend on
+ package console-terminus therefore
+ - use console font Lat2-Terminus16 instead of iso02g,
+ reported by Maciej 'harnir' Delmanowski, thanks!
+ - rename "Activating keyboard settings" to "Activating
+ language settings"
+ - add (deactivated) CONSOLEFONT to /etc/grml/autoconfig[.small]
+ * removed time-stuff from grml-autoconfig interface
+ * fixed name of keyboard code in grml-autoconfig interface
+ * added support for iso02 charmaps in config_keyboard, thanks to
+ Maciej 'harnir' Delmanowski!
+
+ -- Michael Prokop <mika@grml.org> Fri, 28 Apr 2006 22:35:34 +0200
+
+grml-autoconfig (0.4-7) unstable; urgency=low
+
+ * Run config_time and config_timezone only in live-mode.
+
+ -- Michael Prokop <mika@grml.org> Sun, 23 Apr 2006 20:05:51 +0200
+
+grml-autoconfig (0.4-6) unstable; urgency=low
+
+ * We must use $LANG for LC_ALL and LC_MESSAGES.
+
+ -- Michael Prokop <mika@grml.org> Sat, 22 Apr 2006 00:06:54 +0200
+
+grml-autoconfig (0.4-5) unstable; urgency=low
+
+ * config_environment: set LC_MESSAGES to $LANGUAGE
+ and LC_ALL to $LANGUAGE in /etc/environment
+
+ -- Michael Prokop <mika@grml.org> Fri, 21 Apr 2006 15:32:05 +0200
+
+grml-autoconfig (0.4-4) unstable; urgency=low
+
+ * Use /bin/ls instead of ls to prevent alias errors when
+ running interactive.
+ * Check for mounted /mnt/grml before unmounting.
+ * Always set returncode for variable $RC, avoid race conditions.
+
+ -- Michael Prokop <mika@grml.org> Fri, 21 Apr 2006 00:39:18 +0200
+
+grml-autoconfig (0.4-3) unstable; urgency=low
+
+ * Reworked config_fwtimeout for low default firmware timeout
+ of kernel.
+
+ -- Michael Prokop <mika@grml.org> Sun, 9 Apr 2006 12:28:39 +0200
+
+grml-autoconfig (0.4-2) unstable; urgency=low
+
+ * Don't run code from config_environment on hd-installation.
+
+ -- Michael Prokop <mika@grml.org> Sat, 8 Apr 2006 14:06:07 +0200
+
+grml-autoconfig (0.4-1) unstable; urgency=low
+
+ * New grml version.
+
+ -- Michael Prokop <mika@grml.org> Thu, 6 Apr 2006 16:18:43 +0200
+
+grml-autoconfig (0.3-14) unstable; urgency=low
+
+ * config_fstab: don't try to create empty dirs in /mnt/.
+
+ -- Michael Prokop <mika@grml.org> Wed, 5 Apr 2006 23:56:50 +0200
+
+grml-autoconfig (0.3-13) unstable; urgency=low
+
+ * Removed discover from grml-autoconfig interface. Nobody
+ needs that nowadays anymore...
+ * Activate config_fstab by default again in grml-autoconfig
+ interface.
+ * Reordered execution of $UID check and mktemp in grml-autoconfig
+ interface.
+
+ -- Michael Prokop <mika@grml.org> Mon, 3 Apr 2006 00:36:58 +0200
+
+grml-autoconfig (0.3-12) unstable; urgency=low
+
+ * Updated manpage.
+
+ -- Michael Prokop <mika@grml.org> Thu, 30 Mar 2006 00:25:14 +0200
+
+grml-autoconfig (0.3-11) unstable; urgency=low
+
+ * Reworked config_cpu(). Don't let the kernel decide what
+ cpufrequency modules we want but do it on our own using
+ the new cpufreq-detect.sh from grml-scripts.
+
+ -- Michael Prokop <mika@grml.org> Fri, 24 Mar 2006 11:25:38 +0100
+
+grml-autoconfig (0.3-10) unstable; urgency=low
+
+ * Improved config_swspeak (added sound output).
+
+ -- Michael Prokop <mika@grml.org> Thu, 23 Mar 2006 12:04:46 +0100
+
+grml-autoconfig (0.3-9) unstable; urgency=low
+
+ * Don't run rebuildfstab by default on hd-install's anymore via
+ grml-autoconfig script.
+ * Renamed CONFIG_FSTABUSER to CONFIG_USERFSTAB so adjusting
+ values via grml-autoconfig does not conflict with CONFIG_FSTAB.
+
+ -- Michael Prokop <mika@grml.org> Sat, 25 Feb 2006 20:02:58 +0100
+
+grml-autoconfig (0.3-8) unstable; urgency=low
+
+ * Added detection of software-suspend swap partitions to
+ config_fstab. Support use of ANYSWAP as well.
+
+ -- Michael Prokop <mika@grml.org> Sun, 19 Feb 2006 14:42:49 +0100
+
+grml-autoconfig (0.3-7) unstable; urgency=low
+
+ * Print $CMDLINE when in debug mode.
+
+ -- Michael Prokop <mika@grml.org> Thu, 16 Feb 2006 22:26:24 +0100
+
+grml-autoconfig (0.3-6) unstable; urgency=low
+
+ * Deactivated the 'not running under zsh' warning.
+
+ -- Michael Prokop <mika@grml.org> Fri, 10 Feb 2006 23:42:28 +0100
+
+grml-autoconfig (0.3-5) unstable; urgency=low
+
+ * Added an additional check for label on floppy disks via blkid
+ if running dd was successful to config_automount. Hopefully this
+ fixes the annoying 'GRMLCFG does not work with floppy disk'
+ problem. Needs some testing on real, problematic hardware though.
+
+ -- Michael Prokop <mika@grml.org> Tue, 31 Jan 2006 01:05:15 +0100
+
+grml-autoconfig (0.3-4) unstable; urgency=low
+
+ * Switched some einfo messages to ewarn
+ ("Skipping .. as requested" stuff).
+
+ -- Michael Prokop <mika@grml.org> Sun, 22 Jan 2006 15:11:12 +0100
+
+grml-autoconfig (0.3-3) unstable; urgency=low
+
+ * Adjusted $MEM variables in config_small to better react on low
+ memory systems.
+ * Bumbed required udev version in depends to version 0.080-1.
+
+ -- Michael Prokop <mika@grml.org> Sat, 21 Jan 2006 23:19:11 +0100
+
+grml-autoconfig (0.3-2) unstable; urgency=low
+
+ * Moved discover from depends to suggests. Added check for /sbin/discover
+ to config_discover.
+
+ -- Michael Prokop <mika@grml.org> Sat, 21 Jan 2006 20:12:01 +0100
+
+grml-autoconfig (0.3-1) unstable; urgency=low
+
+ * The 'hey, get your winterschlapfn' release.
+
+ -- Michael Prokop <mika@grml.org> Sat, 21 Jan 2006 13:43:30 +0100
+
+grml-autoconfig (0.2-49) unstable; urgency=low
+
+ * Oh, I forgot to print the 'no $IP'-code in config_distcc
+ only if bootparam distcc is set. Nothing serious, fixed anyway.
+
+ -- Michael Prokop <mika@grml.org> Fri, 20 Jan 2006 21:50:09 +0100
+
+grml-autoconfig (0.2-48) unstable; urgency=low
+
+ * Improved info messages in config_distcc. Don't try to start
+ distcc if no valid ip address or interface is available.
+
+ -- Michael Prokop <mika@grml.org> Fri, 20 Jan 2006 20:43:53 +0100
+
+grml-autoconfig (0.2-47) unstable; urgency=low
+
+ * Fixed volume handling in config_mixer (empty default variable).
+ * Wait until $IP is set in config_distcc or continue after 10 tries.
+
+ -- Michael Prokop <mika@grml.org> Fri, 20 Jan 2006 14:09:32 +0100
+
+grml-autoconfig (0.2-46) unstable; urgency=low
+
+ * Switched order of execution of config_kernel and config_vmware.
+ * Added bootoption novmware to skip execution of vmware specific
+ stuff.
+
+ -- Michael Prokop <mika@grml.org> Mon, 16 Jan 2006 22:02:57 +0100
+
+grml-autoconfig (0.2-45) unstable; urgency=low
+
+ * Fixed racecondition with unquoted $VARIABLES (thanks, Gebi!).
+
+ -- Michael Prokop <mika@grml.org> Sun, 15 Jan 2006 22:39:16 +0100
+
+grml-autoconfig (0.2-44) unstable; urgency=low
+
+ * Improved output of config_modem.
+
+ -- Michael Prokop <mika@grml.org> Sat, 14 Jan 2006 23:28:52 +0100
+
+grml-autoconfig (0.2-43) unstable; urgency=low
+
+ * speechd-up does not start through grml-autoconfig, so start
+ it manually after booting. Changed an einfo to eend as well.
+
+ -- Michael Prokop <mika@grml.org> Sat, 14 Jan 2006 22:51:07 +0100
+
+grml-autoconfig (0.2-42) unstable; urgency=low
+
+ * Run speechd-up in daemon mode.
+ * Disable config_pcmcia by default now (cardmgr is obsolete
+ with current kernel and udev).
+ * Removed pcmcia and firewirefix from grml-autoconfig interface.
+
+ -- Michael Prokop <mika@grml.org> Sat, 14 Jan 2006 18:34:50 +0100
+
+grml-autoconfig (0.2-41) unstable; urgency=low
+
+ * Added - experimental - config_swspeak / CONFIG_SWSPEAK
+ (run software synthesizer via speakup).
+
+ -- Michael Prokop <mika@grml.org> Sat, 14 Jan 2006 14:47:48 +0100
+
+grml-autoconfig (0.2-40) unstable; urgency=low
+
+ * Removed config_keyboard_cmdline and moved code from there to
+ config_language to avoid racecondition. Now using bootoptions
+ lang, keyboard and xkeyboard should work at the same time.
+
+ -- Michael Prokop <mika@grml.org> Thu, 12 Jan 2006 21:23:54 +0100
+
+grml-autoconfig (0.2-39) unstable; urgency=low
+
+ * Updated config_pcmcia so it works with new pcmciautils package,
+ where cardmgr isn't present anymore. Needs some tests, though.
+ * Install autoconfig.functions with permissions 755 so it can
+ be executed.
+
+ -- Michael Prokop <mika@grml.org> Thu, 12 Jan 2006 18:09:06 +0100
+
+grml-autoconfig (0.2-38) unstable; urgency=low
+
+ * Updated config_ipv6.
+
+ -- Michael Prokop <mika@grml.org> Mon, 9 Jan 2006 22:19:21 +0100
+
+grml-autoconfig (0.2-37) unstable; urgency=low
+
+ * Added ipv6 bootoption (thanks, Stephan Peijnik!). Needs
+ some testing though.
+
+ -- Michael Prokop <mika@grml.org> Sun, 8 Jan 2006 22:57:22 +0100
+
+grml-autoconfig (0.2-36) unstable; urgency=low
+
+ * Improved config_cpu:
+ - removed UUOL
+ - check for cpudyn-support (thanks, Stephan Peijnik!)
+ * Warn if running not under zsh.
+ * Switched 'eend 0 || eend 1' statements to 'eend $?'.
+
+ -- Michael Prokop <mika@grml.org> Sun, 8 Jan 2006 16:54:22 +0100
+
+grml-autoconfig (0.2-35) unstable; urgency=low
+
+ * Oh, wrong logic for $VOL in config_mixer. Fixed.
+
+ -- Michael Prokop <mika@grml.org> Sun, 8 Jan 2006 00:29:14 +0100
+
+grml-autoconfig (0.2-34) unstable; urgency=low
+
+ * Modified $NOSWAP logic in config_fstab for infotext.
+ * Add bootoption nofirewiredev in config_firewire_dev.
+ * Set CONFIG_FIREWIRE_DEV to no by default.
+
+ -- Michael Prokop <mika@grml.org> Sun, 8 Jan 2006 00:08:57 +0100
+
+grml-autoconfig (0.2-33) unstable; urgency=low
+
+ * Check for return codes in interface (thanks for hint, Gebi).
+
+ -- Michael Prokop <mika@grml.org> Sat, 7 Jan 2006 14:19:44 +0100
+
+grml-autoconfig (0.2-32) unstable; urgency=low
+
+ * Don't try to create stuff like /proc/bus/usb in config_fstab.
+
+ -- Michael Prokop <mika@grml.org> Sat, 7 Jan 2006 12:26:53 +0100
+
+grml-autoconfig (0.2-31) unstable; urgency=low
+
+ * Use wm-ng (fluxbox with addons) as default window manager for
+ bootoption startx.
+
+ -- Michael Prokop <mika@grml.org> Sat, 7 Jan 2006 11:53:14 +0100
+
+grml-autoconfig (0.2-30) unstable; urgency=low
+
+ * Added bootoption vol for setting volumes via aumix to config_mixer.
+
+ -- Michael Prokop <mika@grml.org> Thu, 5 Jan 2006 19:45:54 +0100
+
+grml-autoconfig (0.2-29) unstable; urgency=low
+
+ * Add function iszsh to autoconfig.functions and use setopt only
+ if running with zsh.
+
+ -- Michael Prokop <mika@grml.org> Thu, 5 Jan 2006 17:37:20 +0100
+
+grml-autoconfig (0.2-28) unstable; urgency=low
+
+ * Call rmnologin with start-option (thx4hint, Marc!).
+ * Don't output the 'overall' text in RAM-info.
+
+ -- Michael Prokop <mika@grml.org> Wed, 4 Jan 2006 14:29:18 +0100
+
+grml-autoconfig (0.2-27) unstable; urgency=low
+
+ * Improved output of RAM-info.
+
+ -- Michael Prokop <mika@grml.org> Tue, 3 Jan 2006 23:10:54 +0100
+
+grml-autoconfig (0.2-26) unstable; urgency=low
+
+ * Don't use discover by default anymore (udev does that now).
+ * Rewrote config_blacklist:
+ - run it only on live-cd
+ - use /etc/modprobe.d/grml
+ * Removed hotplug-light from grml-autoconfig interface and
+ set default for discover to 'off'.
+
+ -- Michael Prokop <mika@grml.org> Sat, 31 Dec 2005 18:22:25 +0100
+
+grml-autoconfig (0.2-25) unstable; urgency=low
+
+ * Some small changes in look'n'feel.
+ * Run config_small earlier.
+ * Rewrote output code of discover function.
+ * Rewrote code of config_acpi_apm.
+ * Added CONFIG_SETKEYCODES.
+ * Lot's of code cleanups.
+ * Rewrote bootoptions passwd and ssh.
+ * Implemented bootoption blacklist (notice: not used currently).
+
+ -- Michael Prokop <mika@grml.org> Tue, 27 Dec 2005 19:37:48 +0100
+
+grml-autoconfig (0.2-24) unstable; urgency=low
+
+ * Added check for RAM to config_small.
+ * Switched log_* lsb-functions to e* stuff.
+
+ -- Michael Prokop <mika@grml.org> Tue, 27 Dec 2005 17:17:49 +0100
+
+grml-autoconfig (0.2-23) unstable; urgency=low
+
+ * Fixed typo in config_fstab.
+
+ -- Michael Prokop <mika@grml.org> Wed, 21 Dec 2005 10:26:32 +0100
+
+grml-autoconfig (0.2-22) unstable; urgency=low
+
+ * Don't use static values for grml-autoconfig interface.
+
+ -- Michael Prokop <mika@grml.org> Sun, 18 Dec 2005 21:55:06 +0100
+
+grml-autoconfig (0.2-21) unstable; urgency=low
+
+ * Use 'harddisk' instead of 'Harddisk' as infotext (thx4hint,
+ Jens Kubieziel!).
+
+ -- Michael Prokop <mika@grml.org> Sat, 17 Dec 2005 23:16:39 +0100
+
+grml-autoconfig (0.2-20) unstable; urgency=low
+
+ * Added config_debnet (thanks, Marc Haber!).
+
+ -- Michael Prokop <mika@grml.org> Sat, 17 Dec 2005 18:54:25 +0100
+
+grml-autoconfig (0.2-19) unstable; urgency=low
+
+ * Fixed bug in config_cdrom_scripts which prevented
+ execution of files in /cdrom/scripts/.
+
+ -- Michael Prokop <mika@grml.org> Tue, 13 Dec 2005 19:16:45 +0100
+
+grml-autoconfig (0.2-18) unstable; urgency=low
+
+ * Run grml2hd-noninteractive inside GNU screen.
+ * Deactivate hotplug(-light) as udev handles this stuff
+ already.
+ * Added config_vmware (creates xorg.conf based on template).
+
+ -- Michael Prokop <mika@grml.org> Sun, 11 Dec 2005 12:39:34 +0100
+
+grml-autoconfig (0.2-17) unstable; urgency=low
+
+ * Some clean ups in lsb-functions.
+
+ -- Michael Prokop <mika@grml.org> Mon, 5 Dec 2005 11:21:11 +0100
+
+grml-autoconfig (0.2-16) unstable; urgency=low
+
+ * Adjusted hotplug-system for use with udev >=0.076-4.
+ * Merged gentoo-functions into lsb-functions.
+
+ -- Michael Prokop <mika@grml.org> Sun, 4 Dec 2005 23:31:38 +0100
+
+grml-autoconfig (0.2-15) unstable; urgency=low
+
+ * Added bootoption 'nomodules' to disable loading of modules
+ defined in /etc/grml/modules.
+
+ -- Michael Prokop <mika@grml.org> Sat, 3 Dec 2005 15:31:00 +0100
+
+grml-autoconfig (0.2-14) unstable; urgency=low
+
+ * Support module-init-tools-style of loading specific modules
+ through /etc/grml/modules - only available when running from
+ CD.
+
+ -- Michael Prokop <mika@grml.org> Sat, 3 Dec 2005 12:42:03 +0100
+
+grml-autoconfig (0.2-13) unstable; urgency=low
+
+ * Adjust /etc/hosts when using bootparam 'hostname=...' as well.
+
+ -- Michael Prokop <mika@grml.org> Thu, 1 Dec 2005 13:23:10 +0100
+
+grml-autoconfig (0.2-12) unstable; urgency=low
+
+ * Use getent for getting fstabuser.
+
+ -- Michael Prokop <mika@grml.org> Sat, 26 Nov 2005 19:58:02 +0100
+
+grml-autoconfig (0.2-11) unstable; urgency=low
+
+ * Upps, spelling error in fstab infotext - fixed that.
+
+ -- Michael Prokop <mika@grml.org> Mon, 21 Nov 2005 22:45:52 +0100
+
+grml-autoconfig (0.2-10) unstable; urgency=low
+
+ * Added infotext to config_fstab how to disable fstab generation.
+
+ -- Michael Prokop <mika@grml.org> Mon, 21 Nov 2005 15:58:59 +0100
+
+grml-autoconfig (0.2-9) unstable; urgency=low
+
+ * 855resolution is now 915resolution.
+ * Added support for setting hostname via bootparam 'hostname=...'.
+ * Added bootparam distcc, set via distcc=$NETWORK,$LISTENER.
+
+ -- Michael Prokop <mika@grml.org> Wed, 16 Nov 2005 18:31:41 +0100
+
+grml-autoconfig (0.2-8) unstable; urgency=low
+
+ * Just a small cosmetic fix in GRMLCFG-code.
+
+ -- Michael Prokop <mika@grml.org> Thu, 10 Nov 2005 23:38:16 +0100
+
+grml-autoconfig (0.2-7) unstable; urgency=low
+
+ * Adjusted output of floppy mount of GRMLCFG device.
+ * Removed debug output in language code.
+
+ -- Michael Prokop <mika@grml.org> Thu, 10 Nov 2005 10:51:23 +0100
+
+grml-autoconfig (0.2-6) unstable; urgency=low
+
+ * Some small bugfixes in config_swap.
+ * Improved language settings. Setting LANGUAGE is now also possible
+ via configuring $LANGUAGE in /etc/grml/autoconfig.
+
+ -- Michael Prokop <mika@grml.org> Tue, 8 Nov 2005 13:49:23 +0100
+
+grml-autoconfig (0.2-5) unstable; urgency=low
+
+ * Added CONFIG_FAST for skipping startup of w3m via bootparam
+ 'fast'.
+
+ -- Michael Prokop <mika@grml.org> Sun, 6 Nov 2005 16:25:12 +0100
+
+grml-autoconfig (0.2-4) unstable; urgency=low
+
+ * Added /etc/init.d/grml-autoconfig.strace
+
+ -- Michael Prokop <mika@grml.org> Thu, 3 Nov 2005 17:03:37 +0100
+
+grml-autoconfig (0.2-3) unstable; urgency=low
+
+ * Added check for existence of /usr/X11R6/bin/X in startx
+ bootparam.
+
+ -- Michael Prokop <mika@grml.org> Tue, 1 Nov 2005 19:32:44 +0100
+
+grml-autoconfig (0.2-2) unstable; urgency=low
+
+ * Fixed message of accessing floppy disk in config_automount.
+
+ -- Michael Prokop <mika@grml.org> Tue, 1 Nov 2005 18:46:11 +0100
+
+grml-autoconfig (0.2-1) unstable; urgency=low
+
+ * Let's bumb version to 0.2 as grml-autoconfig is already shipped
+ with grml 0.5.
+ * Let's drop /etc/init.d/grml-autoconfig.old
+ * Changed access to floppy device from mount command to dd
+ in config_automount (thanks for idea, gebi!).
+
+ -- Michael Prokop <mika@grml.org> Tue, 1 Nov 2005 18:35:50 +0100
+
+grml-autoconfig (0.1-56) unstable; urgency=low
+
+ * Added infotext in config_automount.
+
+ -- Michael Prokop <mika@grml.org> Sun, 23 Oct 2005 16:35:37 +0200
+
+grml-autoconfig (0.1-55) unstable; urgency=low
+
+ * Improved device handling in config_automount.
+
+ -- Michael Prokop <mika@grml.org> Sun, 23 Oct 2005 15:25:26 +0200
+
+grml-autoconfig (0.1-54) unstable; urgency=low
+
+ * Automounting works so added CONFIG_AUTOMOUNT to autoconfig
+ and autoconfig.small.
+ * Improved config_debug so we can use screen with full featured
+ shell (providing job handling).
+ * We have to use directory /cdrom/bootparams/ and not a single
+ file for multisessions.
+
+ -- Michael Prokop <mika@grml.org> Sun, 23 Oct 2005 12:45:09 +0200
+
+grml-autoconfig (0.1-53) unstable; urgency=low
+
+ * Invoke a /bin/zsh after running grml2hd in non-interactive
+ mode in any case.
+ * We do need check for /cdrom/bootparams in /etc/init.d/grml-autoconfig
+ of course.
+
+ -- Michael Prokop <mika@grml.org> Sun, 23 Oct 2005 00:40:13 +0200
+
+grml-autoconfig (0.1-52) unstable; urgency=low
+
+ * Finished documentation in /etc/grml/autoconfig[.small].
+
+ -- Michael Prokop <mika@grml.org> Thu, 20 Oct 2005 11:42:26 +0200
+
+grml-autoconfig (0.1-51) unstable; urgency=low
+
+ * Only a small clean up of info message in config_homedir.
+
+ -- Michael Prokop <mika@grml.org> Tue, 18 Oct 2005 21:52:31 +0200
+
+grml-autoconfig (0.1-50) unstable; urgency=low
+
+ * Updated config_modem (don't start if it sl-modem is not present).
+
+ -- Michael Prokop <mika@grml.org> Mon, 17 Oct 2005 16:16:31 +0200
+
+grml-autoconfig (0.1-49) unstable; urgency=low
+
+ * Added partconf to CONFIG_MYCONFIG.
+ * Fixed problem in script grml-autoconfig with exit status
+ of set_values-function.
+ * Added wlan to strings of /proc/net/dev in config_dhcp (thanks to
+ Martin 'mabu' Buchleitner!).
+ * Fixed architecure specific things.
+ - This package is an architecture all file
+ - acpid is i386, amd64 only, so added apmd as alternative
+ -> Thanks Alexander Wirt <formorer@debian.org>!
+ * Use /cdrom/bootparams for additional bootparams.
+ * Oh, it's /var/log/boot and not bootlogd - adjusted infotext.
+
+ -- Michael Prokop <mika@grml.org> Wed, 12 Oct 2005 16:29:20 +0200
+
+grml-autoconfig (0.1-48) unstable; urgency=low
+
+ * Rewrote CONFIG_MYCONFIG.
+
+ -- Michael Prokop <mika@grml.org> Tue, 11 Oct 2005 18:30:06 +0200
+
+grml-autoconfig (0.1-47) unstable; urgency=low
+
+ * Removed CONFIG_RNETCONFIG and rewrote functions for
+ CONFIG_NETCONFIG.
+
+ -- Michael Prokop <mika@grml.org> Thu, 6 Oct 2005 17:26:08 +0200
+
+grml-autoconfig (0.1-46) unstable; urgency=low
+
+ * Deprecated CONFIG_REMOUNT_ROOT.
+
+ -- Michael Prokop <mika@grml.org> Wed, 5 Oct 2005 23:11:57 +0200
+
+grml-autoconfig (0.1-45) unstable; urgency=low
+
+ * Oh, NONINTERACTIVE does not work as expected for hotplug-light.
+ Changed back to old behaviour therefore.
+
+ -- Michael Prokop <mika@grml.org> Sun, 2 Oct 2005 17:35:17 +0200
+
+grml-autoconfig (0.1-44) unstable; urgency=low
+
+ * Updated finish langauge settings (merged from knoppix mailing
+ list).
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 21:41:13 +0200
+
+grml-autoconfig (0.1-43) unstable; urgency=low
+
+ * Adjusted BOOTDEBUG with printk-settings.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 16:16:47 +0200
+
+grml-autoconfig (0.1-42) unstable; urgency=low
+
+ * Fixed rebuildfstab command.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 14:44:39 +0200
+
+grml-autoconfig (0.1-41) unstable; urgency=low
+
+ * Run hotplug-light with NONINTERACTIVE=yes so we supress
+ error messages while booting...
+ * Upps, hotplug-light was already in depends, removed again.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 12:11:10 +0200
+
+grml-autoconfig (0.1-40) unstable; urgency=low
+
+ * Moved kernel ring buffer settings behind color-stuff.
+ * Added hotplug-light to depends.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 02:08:48 +0200
+
+grml-autoconfig (0.1-39) unstable; urgency=low
+
+ * Use grml-autoconfig in runlevel 2: modified postinstall script.
+ * Added syslog-ng to depends.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 02:03:17 +0200
+
+grml-autoconfig (0.1-38) unstable; urgency=low
+
+ * Added gpm to depends.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 00:51:52 +0200
+
+grml-autoconfig (0.1-37) unstable; urgency=low
+
+ * Added check if rebuildfstab binary is present.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 00:34:33 +0200
+
+grml-autoconfig (0.1-36) unstable; urgency=low
+
+ * Added /etc/sysconfig-directory with empty files to make sure
+ the files exist.
+
+ -- Michael Prokop <mika@grml.org> Sat, 1 Oct 2005 00:15:53 +0200
+
+grml-autoconfig (0.1-35) unstable; urgency=low
+
+ * Modified gpm-startup (thanks, gebi!) - this should fix the
+ "missing /dev/psaux" problem.
+ * Added CONFIG_855RESOLUTION.
+ * Updated manpage.
+
+ -- Michael Prokop <mika@grml.org> Tue, 27 Sep 2005 22:34:13 +0200
+
+grml-autoconfig (0.1-34) unstable; urgency=low
+
+ * Adjusted infotext in grml-autonconfig for dhcp-option
+ (s/dhclient/pump/) [thanks for reporting, hecka!].
+ * Added cf (French Canadian version) to suppported languages
+ (taken from knoppix mailinglist).
+
+ -- Michael Prokop <mika@grml.org> Tue, 27 Sep 2005 13:10:33 +0200
+
+grml-autoconfig (0.1-33) unstable; urgency=low
+
+ * Implemented boot options for automatic grml2hd-installation:
+ - user
+ - filesystem
+ - partition
+ - bootpartition
+ * Adjust kernel ring buffer at beginng of grml-autoconfig.
+
+ -- Michael Prokop <mika@grml.org> Sun, 25 Sep 2005 00:53:32 +0200
+
+grml-autoconfig (0.1-32) unstable; urgency=low
+
+ * Added check for root-permissions to script grml-autoconfig.
+
+ -- Michael Prokop <mika@grml.org> Sat, 24 Sep 2005 23:15:49 +0200
+
+grml-autoconfig (0.1-31) unstable; urgency=low
+
+ * Added CONFIG_GRML2HD for automatic installation via bootoption
+ grml2hd.
+
+ -- Michael Prokop <mika@grml.org> Wed, 21 Sep 2005 22:25:13 +0200
+
+grml-autoconfig (0.1-30) unstable; urgency=low
+
+ * No, let's drop the /proc/bus/usb code, we should handle this via
+ /etc/init.d/mountvirtfs.
+
+ -- Michael Prokop <mika@grml.org> Wed, 21 Sep 2005 18:45:42 +0200
+
+grml-autoconfig (0.1-29) unstable; urgency=low
+
+ * Let's mount /proc/bus/usb in mount_proc if not booting with 'nousb'.
+
+ -- Michael Prokop <mika@grml.org> Wed, 21 Sep 2005 18:38:43 +0200
+
+grml-autoconfig (0.1-28) unstable; urgency=low
+
+ * Let's drop config_checkfs -> CONFIG_CHECKFS='no', we should
+ handle this via update-rc.d / runlevels.
+ * Use 'hostname --file /etc/hostname' instead of 'hostname grml'
+ and use it also on harddisk installations.
+
+ -- Michael Prokop <mika@grml.org> Tue, 20 Sep 2005 14:55:21 +0200
+
+grml-autoconfig (0.1-27) unstable; urgency=low
+
+ * Let's use 'xorgcfg -textmode' for interactive setup.
+
+ -- Michael Prokop <mika@grml.org> Sat, 17 Sep 2005 12:05:18 +0200
+
+grml-autoconfig (0.1-26) unstable; urgency=low
+
+ * Redirect output of check_partitions to /dev/null.
+ * Moved startup of syslog to an earlier place.
+
+ -- Michael Prokop <mika@grml.org> Fri, 16 Sep 2005 13:50:58 +0200
+
+grml-autoconfig (0.1-25) unstable; urgency=low
+
+ * Modified bootoption 'log'; bootlogd is broken with sysvinit_2.86.ds1-2_i386.deb
+ but works with sysvinit_2.86.ds1-1.1_i386.deb, hmpf.
+
+ -- Michael Prokop <mika@grml.org> Mon, 12 Sep 2005 10:22:25 +0200
+
+grml-autoconfig (0.1-24) unstable; urgency=low
+
+ * Let's make autoconfig.functions executable and use /usr/bin/zsh.
+ * Fixed bootoption 'log' (missing a variable export).
+
+ -- Michael Prokop <mika@grml.org> Mon, 12 Sep 2005 02:53:15 +0200
+
+grml-autoconfig (0.1-23) unstable; urgency=low
+
+ * Added new bootoption CONFIG_FWTIMEOUT for setting timeout
+ for firmware loading (via /sys/class/firmware/timeout).
+
+ -- Michael Prokop <mika@grml.org> Mon, 12 Sep 2005 01:57:59 +0200
+
+grml-autoconfig (0.1-22) unstable; urgency=low
+
+ * Adjusted options for use with new config framework (CONFIG_NETCONFIG /
+ CONFIG_RNETCONFIG). (Thanks for reporting, Marc Haber!)
+
+ -- Michael Prokop <mika@grml.org> Sat, 10 Sep 2005 11:47:38 +0200
+
+grml-autoconfig (0.1-21) unstable; urgency=low
+
+ * Some small eye-candy-improvements in script grml-autoconfig.
+ Output message if adjusting values worked, error message on failure.
+
+ -- Michael Prokop <mika@grml.org> Mon, 5 Sep 2005 01:49:23 +0200
+
+grml-autoconfig (0.1-20) unstable; urgency=low
+
+ * Renamed config_config to config_netconfig, config_rconfig to
+ config_rnetconfig.
+ * Added config_scripts, config_debs, config_config.
+ * Some more cleanups (changed some more echo-ing stuff
+ to lsb-functions).
+
+ -- Michael Prokop <mika@grml.org> Mon, 5 Sep 2005 01:23:59 +0200
+
+grml-autoconfig (0.1-19) unstable; urgency=low
+
+ * The 'now we have an interface and are lintian-clean' release.
+ * Added script grml-autoconfig (interface to configuration
+ file /etc/grml/autoconfig).
+ * Renamed CONFIG_HOTPLUG to CONFIG_HOTPLUG_MAIN.
+ * Made package lintian-clean (use /usr/bin/zsh as zsh path,
+ added dependency to zsh, let's use update-rc.d for
+ /etc/init.d/grml-autoconfig).
+
+ -- Michael Prokop <mika@grml.org> Mon, 5 Sep 2005 00:26:20 +0200
+
+grml-autoconfig (0.1-18) unstable; urgency=low
+
+ * Added config_fix_passwd (fix passwd-problem).
+
+ -- Michael Prokop <mika@grml.org> Wed, 17 Aug 2005 21:23:09 +0200
+
+grml-autoconfig (0.1-17) unstable; urgency=low
+
+ * Added small hint to config_x_startup.
+
+ -- Michael Prokop <mika@grml.org> Sun, 14 Aug 2005 17:58:57 +0200
+
+grml-autoconfig (0.1-16) unstable; urgency=low
+
+ * Let's support startx only on live-cd-systems (because of
+ the init-hack). Prompt useful message instead on harddisk-systems.
+
+ -- Michael Prokop <mika@grml.org> Sun, 14 Aug 2005 14:32:15 +0200
+
+grml-autoconfig (0.1-15) unstable; urgency=low
+
+ * Fixed value for cs/cz-keyboard-layout.
+ * Added checkgrmlusb.
+ * Added config_x_startup for bootparam 'startx[=windowmanager]'.
+ * Improved handling of DEBUG=.....
+ * Let's run loadkeys in background.
+
+ -- Michael Prokop <mika@grml.org> Sun, 7 Aug 2005 21:22:54 +0200
+
+grml-autoconfig (0.1-14) unstable; urgency=low
+
+ * Improved language support for grml-small (let's use LANG=C there) via
+ function checkgrmlsmall.
+
+ -- Michael Prokop <mika@grml.org> Thu, 28 Jul 2005 10:13:15 +0200
+
+grml-autoconfig (0.1-13) unstable; urgency=low
+
+ * We don't want to use mouseconfig anymore.
+
+ -- Michael Prokop <mika@grml.org> Thu, 14 Jul 2005 11:49:53 +0200
+
+grml-autoconfig (0.1-12) unstable; urgency=low
+
+ * We don't need kbdconfig anymore, now we call
+ /usr/sbin/dpkg-reconfigure console-data.
+
+ -- Michael Prokop <mika@grml.org> Thu, 14 Jul 2005 11:33:10 +0200
+
+grml-autoconfig (0.1-11) unstable; urgency=low
+
+ * Added support for bootsplash.
+ * Reordered execution of grml-autoconfig functions.
+
+ -- Michael Prokop <mika@grml.org> Sun, 10 Jul 2005 12:37:52 +0200
+
+grml-autoconfig (0.1-10) unstable; urgency=low
+
+ * Adjusted black-bootparam for use with hotplug-light.
+ * Fixed passwd and ssh bootparams (problems with chpasswd).
+ * Added CONFIG_CONSOLE for use with mgetty.
+ * Slightly improved CONFIG_CREATE_MNT_DIRS.
+
+ -- Michael Prokop <mika@grml.org> Tue, 5 Jul 2005 00:10:38 +0200
+
+grml-autoconfig (0.1-9) unstable; urgency=low
+
+ * Fixed 'grml testcd'-cheatcode (md5sum-handling).
+
+ -- Michael Prokop <mika@grml.org> Mon, 4 Jul 2005 01:29:08 +0200
+
+grml-autoconfig (0.1-8) unstable; urgency=low
+
+ * Let's always activate check_partitions.
+ * Fixed debug bootparam handling.
+
+ -- Michael Prokop <mika@grml.org> Sun, 3 Jul 2005 23:28:39 +0200
+
+grml-autoconfig (0.1-7) unstable; urgency=low
+
+ * Adjusted hotplug for use with hotplug-light (but still works
+ with hotplug anyway).
+
+ -- Michael Prokop <mika@grml.org> Sun, 3 Jul 2005 21:06:09 +0200
+
+grml-autoconfig (0.1-6) unstable; urgency=low
+
+ * Added CONFIG_CREATE_MNT_DIRS for creating all directories defined
+ as mounting target in /etc/fstab.
+
+ -- Michael Prokop <mika@grml.org> Sat, 2 Jul 2005 23:07:31 +0200
+
+grml-autoconfig (0.1-5) unstable; urgency=low
+
+ * Added workaround/fix for unionfs ('apt-...' segfaults cause
+ of problems with /var/cache/apt/*.bin): CONFIG_FIX_UNIONFS
+ * Let's create firewire devices not only with kernel 2.6.11.
+ * Improved CONFIG_LD_MOD.
+
+ -- Michael Prokop <mika@grml.org> Fri, 1 Jul 2005 01:09:31 +0200
+
+grml-autoconfig (0.1-4) unstable; urgency=low
+
+ * Updated conflicts (for installation without conflicts with grml-etc).
+
+ -- Michael Prokop <mika@grml.org> Sat, 25 Jun 2005 22:55:23 +0200
+
+grml-autoconfig (0.1-3) unstable; urgency=low
+
+ * Included new grml-autoconfig-framework. Now it's possible to
+ control grml-autoconfig behaviour via /etc/grml/autoconfig.
+ Notice that you can fall back to /etc/init.d/grml-autoconfig.old
+ if you consider any problems at the moment.
+
+ -- Michael Prokop <mika@grml.org> Sat, 25 Jun 2005 00:51:16 +0200
+
+grml-autoconfig (0.1-2) unstable; urgency=low
+
+ * Added conflicts to debian/control.
+
+ -- Michael Prokop <mika@grml.org> Thu, 9 Jun 2005 00:49:48 +0200
+
+grml-autoconfig (0.1-1) unstable; urgency=low
+
+ * Initial release.
+
+ -- Michael Prokop <mika@grml.org> Sun, 5 Jun 2005 18:47:51 +0200
+
--- /dev/null
+Source: grml-autoconfig
+Section: grml
+Priority: optional
+Maintainer: Michael Prokop <mika@grml.org>
+Build-Depends: debhelper (>= 4.0.0)
+Standards-Version: 3.6.2
+
+Package: grml-autoconfig
+Architecture: all
+Conflicts: grml-etc (<= 0.4-7)
+Depends: ${shlibs:Depends}, ${misc:Depends}, acpid | apmd, laptop-detect, hotplug | hotplug-light | udev (>= 0.080-1), zsh, gpm, syslog-ng, console-terminus, pump, grml-rebuildfstab (>= 0.3-1), grml-etc-core (>= 0.1-3), grml-scripts (>= 0.8-14)
+Suggests: hwinfo, alsa-utils
+Description: main bootup process of a grml system
+ grml-autoconfig is the main part of the bootup process of the
+ grml system. This includes the hardware recognition system.
+ .
+ grml-autoconfig is also a script which is an interface to
+ the configuration system (see /etc/grml/autoconfig) of
+ the framework.
+ .
+ Homepage: http:/grml.org/
--- /dev/null
+This package was debianized by Michael Prokop <mika@grml.org> on
+Sun, 5 Jun 2005 18:47:51 +0200.
+
+It was downloaded from http://grml.org/
+
+Copyright Holder: Michael Prokop <mika@grml.org>
+
+License:
+
+ This software is copyright (c) 2004-2006 by Michael Prokop.
+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 dated June, 1991.
+
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this package; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
--- /dev/null
+grml-autoconfig: unknown-section grml
+grml-autoconfig: script-in-etc-init.d-not-registered-via-update-rc.d /etc/init.d/grml-autoconfig.strace
--- /dev/null
+#!/bin/sh
+set -e
+
+if [ "$1" = "configure" ]; then
+ update-rc.d grml-autoconfig start 30 2 . >/dev/null
+
+# begin of "create special init scripts which won't be touched any more by grml"
+. /etc/grml/lsb-functions
+INITSCRIPT=bootlocal
+INITNAME=/etc/init.d/${INITSCRIPT}
+DATE=$(date)
+
+for initscript in ${INITNAME}.first ${INITNAME}.middle ${INITNAME}.last ; do
+ if ! [ -r "$initscript" ] ; then
+ einfo "Creating ${initscript}"
+ cat >$initscript <<EOT
+#!/bin/sh
+# Filename: $initscript
+# Purpose: script which allows manual configuration of bootup process
+# Latest change: $DATE
+################################################################################
+# Notice: you can modify this file as you like as long as you do not rename it!
+# grml won't touch this file, even not on upgrades. It will be created only
+# once - when the file isn't present at all.
+################################################################################
+
+## END OF FILE #################################################################
+EOT
+ chmod 755 $initscript; eend $?
+ fi
+done
+
+# register initscripts via update-rc.d:
+update-rc.d ${INITSCRIPT}.first start 1 S . >/dev/null
+update-rc.d ${INITSCRIPT}.middle start 29 2 . >/dev/null
+update-rc.d ${INITSCRIPT}.last start 99 2 . >/dev/null
+# end of "create special init scripts which won't be touched any more by grml"
+
+fi
+
+exit 0
--- /dev/null
+#!/bin/sh
+set -e
+
+if [ "$1" = "purge" ]; then
+ update-rc.d grml-autoconfig remove >/dev/null || exit 0
+
+# don't delete /etc/init.d/bootlocal* scripts, even not when purging - notice therefore:
+ . /etc/grml/lsb-functions
+ INITSCRIPT=bootlocal
+ INITNAME=/etc/init.d/$INITSCRIPT
+ if [ -r "${INITNAME}.first" ] ; then
+ ewarn "Notice: ${INITNAME}.{first,middle,last} won't be deleted automatically." ; eend 0
+ ewarn "If you want to remove them delete them manually and then run:"
+ echo " update-rc.d ${INITSCRIPT}.first remove"
+ echo " update-rc.d ${INITSCRIPT}.middle remove"
+ echo " update-rc.d ${INITSCRIPT}.last remove"
+ fi
+fi
+
+exit 0
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+build: build-stamp
+
+build-stamp:
+ dh_testdir
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs etc/grml etc/init.d usr/sbin usr/bin
+
+ # Add here commands to install the package into debian/grml-autoconfig.
+ install -m 755 grml-autoconfig debian/grml-autoconfig/etc/init.d/grml-autoconfig
+ install -m 644 autoconfig debian/grml-autoconfig/etc/grml/autoconfig
+ install -m 644 autoconfig.small debian/grml-autoconfig/etc/grml/autoconfig.small
+ install -m 755 autoconfig.functions debian/grml-autoconfig/etc/grml/autoconfig.functions
+ install -m 644 language-functions debian/grml-autoconfig/etc/grml/language-functions
+ install -m 755 sbin/grml-autoconfig debian/grml-autoconfig/usr/sbin/grml-autoconfig
+ install -m 755 grml-bootsplash debian/grml-autoconfig/usr/bin/grml-bootsplash
+ # just as a "backup" solution:
+ cp -a etc/* debian/grml-autoconfig/etc/
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installman man/grml-autoconfig.8 man/grml-bootsplash.1
+ dh_link
+ dh_strip
+ dh_compress
+ mkdir -p $(CURDIR)/debian/grml-autoconfig/usr/share/lintian/overrides/
+ cp -av debian/overrides $(CURDIR)/debian/grml-autoconfig/usr/share/lintian/overrides/grml-autoconfig
+ dh_fixperms
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- /dev/null
+# /etc/grml/modules: kernel modules to load at boot time when running from CD.
+# If you want to load specific modules when running from harddisk configure
+# /etc/modules and make sure /etc/init.d/module-init-tools is activate
+# in /etc/runlevel.conf
+#
+# This file should contain the names of kernel modules that are
+# to be loaded at boot time, one per line. Comments begin with
+# a `#', and everything on the line after them are ignored.
+
+evdev
+fuse
--- /dev/null
+/etc/apt/
+/etc/ssh/
+/etc/network/
+/etc/grml/
--- /dev/null
+#!/bin/sh
+# Filename: grml-autoconfig.strace
+# Purpose: strace grml-autoconfig for use with mksquashfs/mkisos sort option
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Thu Nov 03 17:03:03 CET 2005 [mika]
+################################################################################
+
+/usr/bin/strace -f -eopen,stat64,execve -o /etc/grml/strace.autoconfig /etc/init.d/grml-autoconfig "$*" &
+
+## END OF FILE #################################################################
--- /dev/null
+#!/bin/zsh
+# Filename: /etc/init.d/grml-autoconfig
+# Purpose: basic system configuration and hardware setup for grml system
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Fre Aug 04 12:13:13 CEST 2006 [mika]
+################################################################################
+
+# http://wiki.debian.org/LSBInitScripts =>
+### BEGIN INIT INFO
+# Provides: grml-autoconfig
+# Required-Start:
+# Required-Stop:
+# Should-Start: udev
+# Default-Start: S 2 3 4 5
+# Default-Stop:
+### END INIT INFO
+
+if [[ $1 == "restart" ]] ; then
+ echo "$0 restart - empty placeholder. Doing nothing but running."
+fi
+
+if [[ $1 == "force-reload" ]] ; then
+ echo "$0 force-reload - empty placeholder. Doing nothing but running."
+fi
+
+if [[ $1 == "stop" ]] ; then
+ echo "$0 stop - empty placeholder. Doing nothing but exiting."
+ exit 1
+fi
+
+# {{{ path, signals, umask, zsh, colors
+export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin"
+umask 022
+# Ignore these signals: INT, TERM, SEGV
+trap "" 2 3 11
+
+# zsh stuff
+setopt no_nomatch # avoid 'no matches found: ...'
+# }}}
+
+# {{{ source main files
+source /etc/grml/autoconfig # configuration file
+source /etc/grml/autoconfig.functions # functions
+source /etc/grml/lsb-functions
+# }}}
+
+# {{{ mount important directories
+mount_proc
+mount_pts
+mount_sys
+# }}}
+
+# {{{ Read in boot parameters
+CMDLINE="$(cat /proc/cmdline)"
+[ -d /cdrom/bootparams/ ] && CMDLINE="$CMDLINE $(cat /cdrom/bootparams/* | tr '\n' ' ')"
+# }}}
+
+# {{{ main grml-autoconfig
+checkvalue $CONFIG_DEBUG && config_debug
+
+SPLASH=''
+if checkbootparam "splash" ; then
+ SPLASH=1
+fi
+
+if [ -z "$SPLASH" ] ; then
+ stage=5
+ rundebugshell
+fi
+
+if [ -z "$BOOTDEBUG" ] ; then
+ einfo "Setting kernel ring buffer to level 2."
+ echo "2" > /proc/sys/kernel/printk ; eend $?
+else
+ einfo "Setting kernel ring buffer to level 6. Adjust manually via running dmesg -n \$VALUE."
+ echo "6" > /proc/sys/kernel/printk ; eend $?
+fi
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "|">/dev/tty7
+
+checkvalue $CONFIG_LANGUAGE && config_language
+
+checkvalue $CONFIG_LOG && config_log
+
+checkvalue $CONFIG_SWSPEAK && config_swspeak
+
+checkvalue $CONFIG_FWTIMEOUT && config_fwtimeout
+
+checkvalue $CONFIG_FIX_PASSWD && config_fix_passwd
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "||">/dev/tty7
+
+checkvalue $CONFIG_HOSTNAME && config_hostname
+
+checkvalue $CONFIG_USERFSTAB && config_userfstab
+
+checkvalue $CONFIG_TIME && config_time
+
+checkvalue $CONFIG_KERNEL && config_kernel
+
+checkvalue $CONFIG_VMWARE && config_vmware
+
+checkvalue $CONFIG_SMALL && config_small
+
+checkvalue $CONFIG_LD_MOD && config_ld_mod
+
+checkvalue $CONFIG_TIMEZONE && config_timezone
+
+checkvalue $CONFIG_FAST && config_fast
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "|||">/dev/tty7
+
+checkvalue $CONFIG_ENVIRONMENT && config_environment
+
+# No kernel messages while probing modules
+echo "0" > /proc/sys/kernel/printk
+
+checkvalue $CONFIG_CDROM_PERM && config_cdrom_perm
+
+checkvalue $CONFIG_LOCAL_NET && config_local_net
+
+checkvalue $CONFIG_FIREWIRE_DEV && config_firewire_dev
+
+checkvalue $CONFIG_TESTCD && config_testcd
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "||||">/dev/tty7
+
+checkvalue $CONFIG_DISCOVER && config_discover
+
+checkvalue $CONFIG_HWINFO && config_hwinfo
+
+checkvalue $CONFIG_HOTPLUG_AGENT && config_hotplug_agent
+
+checkvalue $CONFIG_HOTPLUG_BLACKLIST && config_hotplug_blacklist
+
+checkvalue $CONFIG_HOTPLUG_MAIN && config_hotplug
+
+checkvalue $CONFIG_MODULES && config_modules
+
+checkvalue $CONFIG_ACPI_APM && config_acpi_apm
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "|||||">/dev/tty7
+
+checkvalue $CONFIG_PCMCIA && config_pcmcia
+
+# {{{ Read in what hwsetup has found
+[ -f /etc/sysconfig/grml ] && . /etc/sysconfig/grml
+# }}}
+
+checkvalue $CONFIG_KEYBOARD && config_keyboard
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "||||||">/dev/tty7
+
+checkvalue $CONFIG_BLIND && config_blind
+
+checkvalue $CONFIG_INTERACTIVE && config_interactive
+
+checkvalue $CONFIG_AGP && config_agp
+
+[ -f /etc/sysconfig/grml ] && . /etc/sysconfig/grml
+
+checkvalue $CONFIG_AUTOMOUNTER && config_automounter
+
+checkvalue $CONFIG_DMA && config_dma
+
+checkvalue $CONFIG_FSTAB && config_fstab
+
+checkvalue $CONFIG_MOUSE && config_mouse
+
+checkvalue $CONFIG_DHCP && config_dhcp
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "|||||||">/dev/tty7
+
+checkvalue $CONFIG_SYSLOG && config_syslog
+
+checkvalue $CONFIG_CPU && config_cpu
+
+checkvalue $CONFIG_SSH && config_ssh
+
+checkvalue $CONFIG_PASSWD && config_passwd
+
+checkvalue $CONFIG_EXTRACT && config_extract
+
+checkvalue $CONFIG_HOMEDIR && config_homedir
+
+checkvalue $CONFIG_MYCONFIG && config_myconfig
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "||||||||">/dev/tty7
+
+checkvalue $CONFIG_CDROM_SCRIPTS && config_cdrom_scripts
+
+# device symlinks {{{
+ [ -r /mnt/floppy ] || mkdir /mnt/floppy
+ [ -r /mnt/cdrom ] || mkdir /mnt/cdrom
+ [ -r /mnt/test ] || mkdir /mnt/test
+# }}}
+
+checkvalue $CONFIG_MIXER && config_mixer
+
+checkvalue $CONFIG_MODEM && config_modem
+
+checkvalue $CONFIG_WONDERSHAPER && config_wondershaper
+
+checkvalue $CONFIG_GPM && config_gpm
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "|||||||||">/dev/tty7
+
+checkvalue $CONFIG_SERVICES && config_services
+
+checkvalue $CONFIG_NETCONFIG && config_netconfig
+
+checkvalue $CONFIG_NETIPV6 && config_ipv6
+
+checkvalue $CONFIG_DEBNET && config_debnet
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "||||||||||">/dev/tty7
+
+checkvalue $CONFIG_CONSOLE && config_console
+
+checkvalue $CONFIG_SETKEYCODES && config_setkeycodes
+
+checkvalue $CONFIG_BLINDSOUND && config_blindsound
+
+checkvalue $CONFIG_WELCOME && config_welcome
+
+checkvalue $CONFIG_FIX_UNIONFS && fix_unionfs
+
+checkvalue $CONFIG_CREATE_MNT_DIRS && create_mnt_dirs
+
+checkvalue $CONFIG_915RESOLUTION && config_915resolution
+
+checkvalue $CONFIG_AUTOMOUNT && config_automount
+
+checkvalue $CONFIG_DISTCC && config_distcc
+
+checkvalue $CONFIG_BLANKING && config_blanking
+
+[ -n "$SPLASH" ] && /usr/bin/grml-bootsplash "|||||||||||">/dev/tty7
+
+checkvalue $CONFIG_GRML2HD && config_grml2hd
+
+checkvalue $CONFIG_XSTARTUP && config_x_startup
+# }}}
+
+# {{{ debug
+if [ -z "$SPLASH" ] ; then
+ stage=6
+ rundebugshell
+fi
+# }}}
+
+if [ -n "$BOOTDEBUG" ] ; then
+ CMDLINE="$(cat /proc/cmdline)"
+ [ -d /cdrom/bootparams/ ] && CMDLINE="$CMDLINE $(cat /cdrom/bootparams/*)"
+ einfo "Bootoption debug detected. Printing kernel command line:"
+ echo "$CMDLINE"
+fi
+
+# {{{ Re-enable signals
+trap 2 3 11
+# }}}
+
+exit 0
+
+## END OF FILE #################################################################
+# vim:foldmethod=marker
--- /dev/null
+#!/bin/bash
+# Filename: grml-bootsplash
+# Purpose: simple text based bootsplash
+# Authors: (c) Florian Keller <Florian.Keller@zuerich.ch>, (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Son Jun 04 16:05:26 CEST 2006 [mika]
+################################################################################
+
+if [ -z "$1" ] ; then
+ STATUS='| not set ||'
+else
+ STATUS="$1" # maximum: 12 '|'
+fi
+
+COUNT=$(echo -n "$STATUS" | wc -c)
+
+if [ "$COUNT" -gt 12 ] ; then
+ COUNT=12 # more than 12 characters are not supported
+ STATUS="||||||||||||"
+fi
+
+PLACEHOLDER=""
+BOOTSPLASH=$(mktemp)
+
+/usr/bin/clear
+cat > $BOOTSPLASH << 'EOTA'
+
+
+
+
+ .----------------. .----------------. .----------------. .----------------.
+| .--------------. || .--------------. || .--------------. || .--------------. |
+| | ______ | || | _______ | || | ____ ____ | || | _____ | |
+| | .' ___ | | || | |_ __ \ | || ||_ \ / _|| || | |_ _| | |
+| | / .' \_| | || | | |__) | | || | | \/ | | || | | | | |
+| | | | ____ | || | | __ / | || | | |\ /| | | || | | | _ | |
+| | \ `.___] _| | || | _| | \ \_ | || | _| |_\/_| |_ | || | _| |__/ | | |
+| | `._____.' | || | |____| |___| | || ||_____||_____|| || | |________| | |
+| | | || | | || | | || | | |
+| '--------------' || '--------------' || '--------------' || '--------------' |
+ '----------------' '----------------' '----------------' '----------------'
+
+ _______________________________________________________________________
+ | |
+ | .''''. |
+ | _.-'/ | \ |
+ | , _.-" ,| / a `-. |
+ | |\ .-" `--""-.__.'==========================-, |
+ | \ '-'` .___.--._)==============================| |
+ | \ .' | | |
+ | | /,_.-' | Loading grml system ... | |
+ | _/ _.'( | (press alt+f1 to exit splash) | |
+ | / ,-' \ \ | | |
+EOTA
+
+
+
+echo -n " | \ \ \`-' | 0% -[" >> $BOOTSPLASH
+echo -en "\e[1;32m$STATUS\e[0;39m" >> $BOOTSPLASH
+
+COUNT=$(expr 13 - $COUNT)
+for (( i=1 ; i < ${COUNT} ; i++ )); do
+ PLACEHOLDER="$PLACEHOLDER "
+done
+
+echo -n "$PLACEHOLDER" >> $BOOTSPLASH
+echo "]- 100% | |" >> $BOOTSPLASH
+
+cat >> $BOOTSPLASH << 'EOTA'
+ | `-' '-------------------------------' |
+ | |
+ | |
+ | |
+ |_______________________________________________________________________|
+
+
+
+
+
+
+EOTA
+
+cat $BOOTSPLASH
+rm -f $BOOTSPLASH &>/dev/null
+
+## END OF FILE #################################################################
--- /dev/null
+# Filename: /etc/grml/language-functions
+# Purpose: general language stuff used in several parts of the grml-system
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Sam Sep 23 18:46:39 CEST 2006 [mika]
+################################################################################
+
+# The default language/keyboard to use. This CAN NOT be autoprobed.
+case "$LANGUAGE" in
+ at)
+ # Austrian version
+ COUNTRY="at"
+ LANG="de_AT@euro"
+ LANGUAGE="de_AT:de"
+ KEYTABLE="de-latin1-nodeadkeys"
+ XKEYBOARD="de"
+ KDEKEYBOARD="de"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="us,fr"
+ TZ="Europe/Vienna"
+ ;;
+ at-utf8)
+ # Austrian version (UTF8)
+ COUNTRY="at"
+ LANG="de_AT.UTF-8"
+ LANGUAGE="de_AT:de"
+ KEYTABLE="de-latin1-nodeadkeys"
+ XKEYBOARD="de"
+ KDEKEYBOARD="de"
+ CHARSET="utf8"
+ # CHARSET="lat9w-16"
+ KDEKEYBOARDS="us,fr"
+ TZ="Europe/Vienna"
+ ;;
+ au)
+ # Australian version
+ LANGUAGE="en"
+ COUNTRY="au"
+ LANG="en_AU"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="iso8859-1"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,fr"
+ TZ="Australia/Sydney"
+ ;;
+ au-utf8)
+ # Australian version (UTF8)
+ LANGUAGE="en_AU:en"
+ COUNTRY="au"
+ LANG="en_AU.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,fr"
+ TZ="Australia/Sydney"
+ ;;
+ be)
+ # Belgian version
+ LANGUAGE="be"
+ COUNTRY="be"
+ LANG="C"
+ KEYTABLE="be2-latin1"
+ XKEYBOARD="be"
+ KDEKEYBOARD="be"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Brussels"
+ ;;
+ be-utf8)
+ # Belgian version (UTF8)
+ LANGUAGE="be_BY:be"
+ COUNTRY="be"
+ LANG="be_BY.UTF-8"
+ KEYTABLE="be2-latin1"
+ XKEYBOARD="be"
+ KDEKEYBOARD="be"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Brussels"
+ ;;
+ bg)
+ # Bulgarian version
+ LANGUAGE="bg"
+ COUNTRY="bg"
+ LANG="bg_BG"
+ KEYTABLE="bg"
+ XKEYBOARD="bg"
+ KDEKEYBOARD="bg"
+ CHARSET="microsoft-cp1251"
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Sofia"
+ ;;
+ bg-utf8)
+ # Bulgarian version (UTF8)
+ LANGUAGE="bg_BG:bg"
+ COUNTRY="bg"
+ LANG="bg_BG.UTF-8"
+ KEYTABLE="bg"
+ XKEYBOARD="bg"
+ KDEKEYBOARD="bg"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Sofia"
+ ;;
+ br)
+ # Brazilian Version
+ LANGUAGE="pt_BR"
+ COUNTRY="br"
+ LANG="pt_BR"
+ KEYTABLE="br-abnt2"
+ XKEYBOARD="abnt2"
+ KDEKEYBOARD="br"
+ CHARSET="iso8859-1"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,br"
+ TZ="America/Sao_Paulo"
+ ;;
+ br-utf8)
+ # Brazilian Version (UTF8)
+ LANGUAGE="pt_BR:pt"
+ COUNTRY="br"
+ LANG="pt_BR.UTF-8"
+ KEYTABLE="br-abnt2"
+ XKEYBOARD="abnt2"
+ KDEKEYBOARD="br"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,br"
+ TZ="America/Sao_Paulo"
+ ;;
+ ch)
+ # Swiss version
+ LANGUAGE="de"
+ COUNTRY="ch"
+ LANG="de_CH"
+ KEYTABLE="sg-latin1"
+ XKEYBOARD="ch"
+ KDEKEYBOARD="ch"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Zurich"
+ ;;
+ ch-utf8)
+ # Swiss version (basically de with some modifications)
+ LANGUAGE="de_CH:de"
+ COUNTRY="ch"
+ LANG="de_CH.UTF-8"
+ KEYTABLE="sg-latin1"
+ XKEYBOARD="de_CH"
+ KDEKEYBOARD="de_CH"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Zurich"
+ ;;
+ cf)
+ # French Canadian version
+ LANGUAGE="fr"
+ COUNTRY="ca"
+ LANG="fr_FR.ISO-8859-1"
+ KEYTABLE="cf"
+ CHARSET="iso8859-1"
+ CONSOLEFONT="lat1-16"
+ XKEYBOARD="ca_enhanced"
+ KDEKEYBOARD="ca_enhanced"
+ KDEKEYBOARDS="us"
+ TZ="AMERICA/MONTREAL"
+ ;;
+ cn)
+ # Simplified Chinese version
+ COUNTRY="cn"
+ LANG="zh_CN.GB2312"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="gb2312.1980-0"
+ KDEKEYBOARDS="us,de,fr"
+ XMODIFIERS="@im=Chinput"
+ TZ="Asia/Shanghai"
+ ;;
+ cn-utf8)
+ # Simplified Chinese version (UTF8)
+ COUNTRY="zh_CN:cn"
+ LANG="zh_CN.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de,fr"
+ XMODIFIERS="@im=Chinput"
+ TZ="Asia/Shanghai"
+ ;;
+ cs|cz)
+ # Czech version
+ LANGUAGE="cs"
+ COUNTRY="cs"
+ LANG="cs_CZ"
+ KEYTABLE="cz-lat2"
+ XKEYBOARD="cs"
+ KDEKEYBOARD="cz"
+ CHARSET="iso8859-2"
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Prague"
+ CONSOLEFONT="Lat2-Terminus16"
+ CHARMAP="iso02"
+ ;;
+ cs-utf8|cz-utf8)
+ # Czech version (UTF8)
+ LANGUAGE="cs_CZ:cs"
+ COUNTRY="cs"
+ LANG="cs_CZ.UTF-8"
+ KEYTABLE="cz-lat2"
+ XKEYBOARD="cs"
+ KDEKEYBOARD="cs"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Prague"
+ CONSOLEFONT="iso02g"
+ ;;
+ de)
+ # German version
+ COUNTRY="de"
+ LANG="de_DE@euro"
+ LANGUAGE="de_DE:de"
+ KEYTABLE="de-latin1-nodeadkeys"
+ XKEYBOARD="de"
+ KDEKEYBOARD="de"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="us,fr"
+ TZ="Europe/Berlin"
+ ;;
+ de-utf8)
+ # German version (UTF8)
+ COUNTRY="de"
+ LANG="de_DE.UTF-8"
+ LANGUAGE="de_DE:de"
+ KEYTABLE="de-latin1-nodeadkeys"
+ XKEYBOARD="de"
+ KDEKEYBOARD="de"
+ CHARSET="utf8"
+ # CHARSET="lat9w-16"
+ KDEKEYBOARDS="us,fr"
+ TZ="Europe/Berlin"
+ ;;
+ dk|da)
+ # Dansk version
+ COUNTRY="dk"
+ LANG="da_DK"
+ # Workaround: "dk" broken in gettext, use da:da_DK
+ LANGUAGE="da:da_DK"
+ # Keytable "dk" is correct.
+ KEYTABLE="dk"
+ XKEYBOARD="dk"
+ KDEKEYBOARD="dk"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="dk,de,us,fr"
+ TZ="Europe/Copenhagen"
+ ;;
+ dk-utf8|da-utf8)
+ # Dansk version (UTF8)
+ COUNTRY="dk"
+ LANG="da_DK.UTF-8"
+ # Workaround: "dk" broken in gettext, use da:da_DK
+ LANGUAGE="da_DK:da"
+ # Keytable "dk" is correct.
+ KEYTABLE="dk"
+ XKEYBOARD="dk"
+ KDEKEYBOARD="dk"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="dk,de,us,fr"
+ TZ="Europe/Copenhagen"
+ ;;
+ en)
+ # English in Austria [see us + uk for american and english version!]
+ LANGUAGE="us"
+ COUNTRY="at"
+ LANG="en_US.iso885915"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="de,fr"
+ TZ="Europe/Vienna"
+ ;;
+ en-utf8)
+ # English in Austria [see us + uk for american and english version!] (UTF8)
+ LANGUAGE="us"
+ COUNTRY="at"
+ LANG="en_US.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,fr"
+ TZ="Europe/Vienna"
+ ;;
+ el)
+ # Greek version
+ LANGUAGE="el"
+ COUNTRY="gr"
+ LANG="el_GR"
+ KEYTABLE="gr"
+ XKEYBOARD="us,el"
+ KDEKEYBOARD="us"
+ CHARSET="iso8859-7"
+ CONSOLEFONT="iso07.f16"
+ IOCHARSET="8859-7"
+ IOCODEPAGE="737"
+ SYSFONTACM="iso07"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="el"
+ TZ="Europe/Athens"
+ ;;
+ el-utf8)
+ # Greek version (UTF8)
+ LANGUAGE="el_GR:el"
+ COUNTRY="gr"
+ LANG="el_GR.UTF-8"
+ KEYTABLE="gr-utf8"
+ XKEYBOARD="us,el"
+ KDEKEYBOARD="us"
+ CHARSET="utf8"
+ CONSOLEFONT="iso07.f16"
+ IOCHARSET="8859-7"
+ IOCODEPAGE="737"
+ SYSFONTACM="iso07"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="el"
+ TZ="Europe/Athens"
+ ;;
+ es)
+ # Spanish version
+ COUNTRY="es"
+ LANG="es_ES@euro"
+ KEYTABLE="es"
+ XKEYBOARD="es"
+ KDEKEYBOARD="es"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Madrid"
+ ;;
+ es-utf8)
+ # Spanish version (UTF8)
+ LANGUAGE="es_ES:es"
+ COUNTRY="es"
+ LANG="es_ES.UTF-8"
+ KEYTABLE="es"
+ XKEYBOARD="es"
+ KDEKEYBOARD="es"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Madrid"
+ CONSOLEFONT="lat10-16"
+ ;;
+ fi)
+ # Finnish version
+ COUNTRY="fi"
+ LANG="fi_FI@euro"
+ KEYTABLE="fi-latin1" # old value: fi
+ XKEYBOARD="fi"
+ KDEKEYBOARD="fi"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="se,us"
+ TZ="Europe/Helsinki"
+ ;;
+ fi-utf8)
+ # Finnish version (UTF8)
+ LANGUAGE="fi_FI:fi"
+ COUNTRY="fi"
+ LANG="fi_FI.UTF-8"
+ KEYTABLE="fi-latin1"
+ XKEYBOARD="fi"
+ KDEKEYBOARD="fi"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us"
+ TZ="Europe/Helsinki"
+ ;;
+ fr)
+ # French version
+ COUNTRY="fr"
+ LANG="fr_FR@euro"
+ KEYTABLE="fr"
+ XKEYBOARD="fr"
+ KDEKEYBOARD="fr"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="de,us"
+ TZ="Europe/Paris"
+ ;;
+ fr-utf8)
+ # French version (UTF8)
+ LANGUAGE="fr_FR"
+ COUNTRY="fr"
+ LANG="fr_FR.UTF-8"
+ KEYTABLE="fr"
+ XKEYBOARD="fr"
+ KDEKEYBOARD="fr"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us"
+ TZ="Europe/Paris"
+ ;;
+ ga)
+ # Irish Gaeilge version
+ COUNTRY="ie"
+ LANG="ga_IE@euro"
+ KEYTABLE="uk"
+ XKEYBOARD="uk"
+ KDEKEYBOARD="ie"
+ CHARSET="iso8859-15"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="gb,us,de,es,fr,it"
+ TZ="Europe/Dublin"
+ ;;
+ ga-utf8)
+ # Irish Gaeilge version (UTF8)
+ COUNTRY="ie"
+ LANG="ga_IE@UTF-8"
+ KEYTABLE="uk"
+ XKEYBOARD="uk"
+ KDEKEYBOARD="ie"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="gb,us,de,es,fr,it"
+ TZ="Europe/Dublin"
+ ;;
+ he|il)
+ # Hebrew version
+ LANGUAGE="he"
+ COUNTRY="il"
+ LANG="he_IL"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="il"
+ CHARSET="iso8859-8"
+ KDEKEYBOARDS="us,fr,de"
+ TZ="Asia/Jerusalem"
+ ;;
+ he-utf8|il-utf8)
+ # Hebrew version (UTF8)
+ LANGUAGE="he_IL:he"
+ COUNTRY="il"
+ LANG="he_IL.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="il"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,fr,de"
+ TZ="Asia/Jerusalem"
+ ;;
+ ie)
+ # Irish (English) version
+ COUNTRY="ie"
+ LANG="en_IE@euro"
+ KEYTABLE="uk"
+ XKEYBOARD="uk"
+ KDEKEYBOARD="gb"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="us,de,es,fr,it"
+ TZ="Europe/Dublin"
+ ;;
+ ie-utf8)
+ # Irish (English) version (UTF8)
+ LANGUAGE="en_IE:en"
+ COUNTRY="ie"
+ LANG="en_IE.UTF-8"
+ KEYTABLE="uk"
+ XKEYBOARD="uk"
+ KDEKEYBOARD="ie"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="gb,us,de,es,fr,it"
+ TZ="Europe/Dublin"
+ ;;
+ it)
+ # Italian version
+ COUNTRY="it"
+ LANG="it_IT@euro"
+ KEYTABLE="it"
+ XKEYBOARD="it"
+ KDEKEYBOARD="it"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="fr,us,de"
+ TZ="Europe/Rome"
+ ;;
+ it-utf8)
+ # Italian version (UTF8)
+ LANGUAGE="it_IT"
+ COUNTRY="it"
+ LANG="it_IT.UTF-8"
+ KEYTABLE="it"
+ XKEYBOARD="it"
+ KDEKEYBOARD="it"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="fr,us,de"
+ TZ="Europe/Rome"
+ ;;
+ ja)
+ # (limited) Japanese version
+ COUNTRY="jp"
+ LANG="ja_JP"
+ LANGUAGE="ja"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="fr,us,de"
+ TZ="Asia/Tokyo"
+ ;;
+ ja-utf8)
+ # (limited) Japanese version (UTF8)
+ LANGUAGE="ja_JP:ja"
+ COUNTRY="jp"
+ LANG="ja_JP.UTF-8"
+ LANGUAGE="ja"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="fr,us,de"
+ TZ="Asia/Tokyo"
+ ;;
+ nl)
+ # Dutch version
+ COUNTRY="nl"
+ LANG="nl_NL@euro"
+ KEYTABLE="us" # nl
+ XKEYBOARD="us" # nl
+ KDEKEYBOARD="en_US" # nl
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="nl,de,fr"
+ TZ="Europe/Amsterdam"
+ ;;
+ nl-utf8)
+ # Dutch version (UTF8)
+ LANGUAGE="nl_NL:nl"
+ COUNTRY="nl"
+ LANG="nl_NL.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="en_US"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="nl,de,fr"
+ TZ="Europe/Amsterdam"
+ ;;
+ pl)
+ # Polish version
+ COUNTRY="pl"
+ LANG="pl_PL"
+ KEYTABLE="pl"
+ XKEYBOARD="pl"
+ KDEKEYBOARD="pl"
+ CHARSET="iso8859-2"
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Warsaw"
+ CONSOLEFONT="Lat2-Terminus16"
+ CHARMAP="iso02"
+ ;;
+ pl-utf8)
+ # Polish version (UTF8)
+ LANGUAGE="pl_PL:pl"
+ COUNTRY="pl"
+ LANG="pl_PL.UTF-8"
+ KEYTABLE="pl"
+ XKEYBOARD="pl"
+ KDEKEYBOARD="pl"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Warsaw"
+ CONSOLEFONT="iso02g"
+ ;;
+ pt)
+ # Portuguese version
+ COUNTRY="pt"
+ LANG="pt_PT@euro"
+ KEYTABLE="pt-latin1"
+ XKEYBOARD="pt"
+ KDEKEYBOARD="pt"
+ CHARSET="iso8859-1"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Lisbon"
+ CONSOLEFONT="lat10-16"
+ ;;
+ pt-utf8)
+ # Portuguese version (UTF8)
+ LANGUAGE="pt_PT:pt"
+ COUNTRY="pt"
+ LANG="pt_PT.UTF-8"
+ KEYTABLE="pt-latin1"
+ XKEYBOARD="pt"
+ KDEKEYBOARD="pt"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Lisbon"
+ CONSOLEFONT="lat10-16"
+ ;;
+ ru)
+ # Russian version
+ COUNTRY="ru"
+ LANG="ru_RU.KOI8-R"
+ KEYTABLE="ru"
+ XKEYBOARD="ru"
+ KDEKEYBOARD="ru"
+ CHARSET="koi8-r"
+ CONSOLEFONT="Cyr_a8x16"
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Moscow"
+ ;;
+ ru-utf8)
+ # Russian version (UTF8)
+ LANGUAGE="ru_RU:ru"
+ COUNTRY="ru"
+ LANG="ru_RU.UTF-8"
+ KEYTABLE="ru"
+ XKEYBOARD="ru"
+ KDEKEYBOARD="ru"
+ CHARSET="utf8"
+ CONSOLEFONT="Cyr_a8x16"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,us,fr"
+ TZ="Europe/Moscow"
+ ;;
+ sk)
+ # Slovak version (guessed)
+ COUNTRY="sk"
+ LANG="sk"
+ KEYTABLE="sk-qwerty"
+ XKEYBOARD="sk"
+ KDEKEYBOARD="sk"
+ CHARSET="iso8859-2"
+ KDEKEYBOARDS="us,de"
+ TZ="Europe/Bratislava"
+ CONSOLEFONT="Lat2-Terminus16"
+ CHARMAP="iso02"
+ ;;
+ sk-utf8)
+ # Slovak version (guessed) (UTF8)
+ LANGUAGE="sk_SK:sk"
+ COUNTRY="sk"
+ LANG="sk_SK.UTF-8"
+ KEYTABLE="sk-qwerty"
+ XKEYBOARD="sk"
+ KDEKEYBOARD="sk"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de"
+ TZ="Europe/Bratislava"
+ CONSOLEFONT="iso02g"
+ ;;
+ sl)
+ # Slovenian keyboard
+ LANGUAGE="sl"
+ COUNTRY="si"
+ LANG="sl_SI"
+ KEYTABLE="slovene"
+ XKEYBOARD="sl"
+ KDEKEYBOARD="si"
+ CHARSET="iso8859-2"
+ KDEKEYBOARDS="us,de"
+ TZ="Europe/Ljubljana"
+ CONSOLEFONT="Lat2-Terminus16"
+ CHARMAP="iso02"
+ ;;
+ sl-utf8)
+ # Slovenian keyboard (UTF8)
+ LANGUAGE="sl_SI:sl"
+ COUNTRY="si"
+ LANG="sl_SI.UTF-8"
+ KEYTABLE="slovene"
+ XKEYBOARD="sl"
+ KDEKEYBOARD="si"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de"
+ TZ="Europe/Ljubljana"
+ CONSOLEFONT="iso02g"
+ ;;
+ tr)
+ # Turkish version (guessed)
+ COUNTRY="tr"
+ LANG="tr_TR"
+ KEYTABLE="tr_q-latin5"
+ XKEYBOARD="tr"
+ KDEKEYBOARD="tr"
+ CHARSET="iso8859-9"
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Istanbul"
+ ;;
+ tr-utf8)
+ # Turkish version (guessed) (UTF8)
+ LANGUAGE="tr_TR"
+ COUNTRY="tr"
+ LANG="tr_TR.UTF-8"
+ KEYTABLE="tr_q-latin5"
+ XKEYBOARD="tr"
+ KDEKEYBOARD="tr"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us,de,fr"
+ TZ="Europe/Istanbul"
+ ;;
+ tw)
+ # Traditional Chinese version
+ COUNTRY="tw"
+ LANG="zh_TW.Big5"
+ LANGUAGE="zh_TW.Big5"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ # CHARSET="big5-0"
+ CHARSET="iso8859-1"
+ KDEKEYBOARDS="us"
+ XMODIFIERS="@im=xcin"
+ TZ="Asia/Taipei"
+ ;;
+ tw-utf8)
+ # Traditional Chinese version (UTF8)
+ LANGUAGE="zh_TW:zh"
+ COUNTRY="tw"
+ LANG="zh_TW.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ # CHARSET="big5-0"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us"
+ XMODIFIERS="@im=xcin"
+ TZ="Asia/Taipei"
+ ;;
+ uk)
+ # British version
+ COUNTRY="uk"
+ LANG="en_GB"
+ LANGUAGE="en"
+ KEYTABLE="uk"
+ XKEYBOARD="uk"
+ KDEKEYBOARD="gb"
+ CHARSET="iso8859-1"
+ KDEKEYBOARDS="us"
+ TZ="Europe/London"
+ ;;
+ uk-utf8)
+ # British version (UTF8)
+ LANGUAGE="en_GB:en"
+ COUNTRY="uk"
+ LANG="en_GB.UTF-8"
+ KEYTABLE="uk"
+ XKEYBOARD="uk"
+ KDEKEYBOARD="gb"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="us"
+ TZ="Europe/London"
+ ;;
+ us)
+ # American version
+ LANGUAGE="en_US:en"
+ COUNTRY="us"
+ LANG="en_US.iso885915"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="en_US.iso885915"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,fr"
+ TZ="America/New_York"
+ ;;
+ us-utf8)
+ # American version (UTF8)
+ LANGUAGE="en_US:en"
+ COUNTRY="us"
+ LANG="en_US.UTF-8"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="utf8"
+ # Additional KDE Keyboards
+ KDEKEYBOARDS="de,fr"
+ TZ="America/New_York"
+ ;;
+ *)
+ # Default
+ LANGUAGE="us"
+ COUNTRY="at"
+ LANG="en_US.iso885915"
+ KEYTABLE="us"
+ XKEYBOARD="us"
+ KDEKEYBOARD="us"
+ CHARSET="iso8859-15"
+ KDEKEYBOARDS="de,fr"
+ TZ="Europe/Vienna"
+ ;;
+esac
+
+## END OF FILE #################################################################
--- /dev/null
+.TH GRML-AUTOCONFIG 8 "June 4, 2006"
+.SH NAME
+grml-autoconfig \- script and configuration framework for the grml system
+.SH SYNOPSIS
+.B grml-autoconfig
+.SH DESCRIPTION
+This manual page documents briefly the
+.B grml-autoconfig
+command and the identically named framework.
+.PP
+\fBgrml-autoconfig\fP is an interface to the framework named grml-autoconfig.
+/etc/init.d/grml-autoconfig is the main script of the grml-system where
+all the hardware recognition and activation of services take place.
+
+grml-autoconfig supports an adjustable configuration via the configuration
+file named /etc/grml/autoconfig. The script named \fBgrml-autoconfig\fP is
+a simple dialog-based interface to the configuration file. You can either
+use the script for configuring grml-autoconfig or modify the configuration
+file manually on your own (there is no interference).
+
+The grml-autoconfig package creates three initscripts on installation:
+/etc/init.d/bootlocal.first, /etc/init.d/bootlocal.middle and
+/etc/init.d/bootlocal.last.
+
+They are created in the maintainer scripts of the grml-autoconfig package.
+This means they are not part of the package itself and therefore also not
+marked as configuration files of the package. As a result the files won't be
+touched anymore, neither when upgrading nor when removing the package! If you
+want to add your own bootup commands you can use these files.
+/etc/init.d/bootlocal.first is executed at the very beginning, in runlevel 'S'.
+/etc/init.d/bootlocal.middle is executed right before startup of
+grml-autoconfig itself in runlevel '2' only (where grml-autoconfig is located
+as well). Finally /etc/init.d/bootlocal.last is executed as one of the last
+initscripts in runlevel '2' only.
+
+.SH OPTIONS
+The program grml-autoconfig does not support any options but needs to be run
+with root permissions as it modifies a system wide configuration file (/etc/grml/autoconfig).
+.SH FILES
+.I /etc/init.d/grml-autoconfig
+.RS
+Init-script which runs the commands defined in /etc/grml/autoconfig.functions
+after checking configuration file /etc/grml/autoconfig.
+.PP
+.RE
+.I /usr/sbin/grml-autoconfig
+.RS
+Dialog interface to the configuration file /etc/grml/autoconfig.
+.PP
+.RE
+.I /etc/grml/autoconfig{.small}
+.RS
+Configuration file for grml-autoconfig framework. On grml-small the configuration
+file is named /etc/grml/autoconfig.small. You can either edit this configuration
+file manually of use the dialog interface /usr/sbin/grml-autoconfig.
+.PP
+.RE
+.I /etc/grml/autoconfig.functions
+.RS
+Main functions of the grml-autoconfig. You do not need to configure or execute the file.
+For debugging purposes you can source this script also from within an interactive
+shell and run specific functions afterwards.
+.PP
+.RE
+.I /etc/grml/lsb-functions
+.RS
+Based on /lib/lsb/init-functions this file provides an adjusted
+version of an lsb-like booting sequence.
+.SH BUGS
+If you find a bug please report it. See http://grml.org/bugs/
+for details about bug reporting.
+.SH AUTHOR
+grml-autoconfig was written by Michael Prokop <mika@grml.org>
+.PP
+This manual page was written by Michael Prokop <mika@grml.org>,
+for the grml project (but may be used by others).
--- /dev/null
+.TH GRML-BOOTSPLASH 1 "June 4, 2006"
+.SH NAME
+grml-bootsplash \- script and configuration framework for the grml system
+.SH SYNOPSIS
+.B grml-bootsplash "||..."
+.SH DESCRIPTION
+This manual page documents briefly the
+.B grml-bootsplash
+command.
+.PP
+\fBgrml-bootsplash\fP provides a text-based simple bootsplash. It is integrated within
+the grml-autoconfig(8) framework. You very probably won't need it otherwise, this manpage just documents
+what grml-bootsplash does.
+.SH OPTIONS
+The program grml-bootsplash does not support any options besides the "||..." sequence.
+If you want to specify first status of bootsplash use 'grml-bootsplash "|"'.
+To specify the last status of bootsplash use 'grml-bootsplash "||||||||||||"' (that's 12 '"').
+The maximum number of supported "|" signs is twelve and will be used automatically if more are specified.
+.SH BUGS
+If you find a bug please report it. See http://grml.org/bugs/
+for details about bug reporting.
+.SH AUTHOR
+grml-bootsplash was written by Michael Prokop <mika@grml.org> and
+Florian Keller <Florian.Keller@zuerich.ch>.
+.PP
+This manual page was written by Michael Prokop <mika@grml.org>,
+for the grml project (but may be used by others).
--- /dev/null
+#!/bin/sh
+# Filename: grml-autoconfig
+# Purpose: configuration interface for grml-autoconfig
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika(at)grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Die Sep 26 12:26:05 CEST 2006 [mika]
+################################################################################
+
+if [ "$UID" != 0 ]; then
+ echo "Error: please run this script with uid 0 (root)." ; exit 1
+fi
+
+LANG=C
+LC_ALL=C
+PN=`basename "$0"`
+TMPFILE=`mktemp`
+
+grep -q small /etc/grml_version 2>/dev/null && AUTOCONFIG=/etc/grml/autoconfig.small || AUTOCONFIG=/etc/grml/autoconfig
+
+[ -r $AUTOCONFIG ] || exit 1
+
+# helper functions
+activate_value()
+{
+ sed -i "s/$1.*/$1='yes'/" $AUTOCONFIG
+}
+
+deactivate_value()
+{
+ sed -i "s/$1.*/$1='no'/" $AUTOCONFIG
+}
+
+check_setting()
+{
+ grep -q $* $TMPFILE && return 0 || return 1
+}
+
+check_current_state()
+{
+ grep -q '^CONFIG_DHCP=.*yes' $AUTOCONFIG && DHCPSTATUS=ON || DHCPSTATUS=OFF
+ grep -q '^CONFIG_ACPI_APM=.*yes' $AUTOCONFIG && ACPI_APMSTATUS=ON || ACPI_APMSTATUS=OFF
+ grep -q '^CONFIG_CPU=.*yes' $AUTOCONFIG && CPUSTATUS=ON || CPUSTATUS=OFF
+ grep -q '^CONFIG_SYSLOG=.*yes' $AUTOCONFIG && SYSLOGSTATUS=ON || SYSLOGSTATUS=OFF
+ grep -q '^CONFIG_GPM=.*yes' $AUTOCONFIG && GPMSTATUS=ON || GPMSTATUS=OFF
+ grep -q '^CONFIG_KERNEL=.*yes' $AUTOCONFIG && KERNELSTATUS=ON || KERNELSTATUS=OFF
+ grep -q '^CONFIG_FSTAB=.*yes' $AUTOCONFIG && FSTABSTATUS=ON || FSTABSTATUS=OFF
+ grep -q '^CONFIG_LANGUAGE=.*yes' $AUTOCONFIG && LANGUAGESTATUS=ON || LANGUAGESTATUS=OFF
+ grep -q '^CONFIG_DMA=.*yes' $AUTOCONFIG && DMASTATUS=ON || DMASTATUS=OFF
+ grep -q '^CONFIG_MIXER=.*yes' $AUTOCONFIG && MIXERSTATUS=ON || MIXERSTATUS=OFF
+}
+
+# main program
+interface()
+{
+ dialog --cr-wrap --clear --cancel-label "Exit" --title "$PN" --checklist "grml-autoconfig is the framework which includes hardware
+detection, activation of system services and this is the
+interface to activate or deactivate some features.
+
+If you do not know what to do at this stage just leave it untouched,
+the defaults are the recommended values.
+
+All the configuration happens in the file /etc/grml/autoconfig - you can
+edit it manually as well.
+" 0 0 0 \
+dhcp "check for network devices and run pump (get ip-address via DHCP)" $DHCPSTATUS \
+acpi_apm "load ACPI/APM modules" $ACPI_APMSTATUS \
+cpufreq "activate cpydyn/powernowd for frequency-scalable CPUs" $CPUSTATUS \
+syslog "start syslog-ng" $SYSLOGSTATUS \
+gpm "start GPM (mouse on console)" $GPMSTATUS \
+kernel "display information on running kernel" $KERNELSTATUS \
+fstab "update /etc/fstab entries (check for devices)" $FSTABSTATUS \
+language "run loadkeys / consolechars" $LANGUAGESTATUS \
+dma "enable DMA for all IDE drives" $DMASTATUS \
+mixer "set audio volumes" $MIXERSTATUS \
+ 2>$TMPFILE
+}
+
+set_values()
+{
+ check_setting dhcp && activate_value CONFIG_DHCP || deactivate_value CONFIG_DHCP
+ check_setting acpi_apm && activate_value CONFIG_ACPI_APM || deactivate_value CONFIG_ACPI_APM
+ check_setting cpufreq && activate_value CONFIG_CPU || deactivate_value CONFIG_CPU
+ check_setting syslog && activate_value CONFIG_SYSLOG || deactivate_value CONFIG_SYSLOG
+ check_setting gpm && activate_value CONFIG_GPM || deactivate_value CONFIG_GPM
+ check_setting kernel && activate_value CONFIG_KERNEL || deactivate_value CONFIG_KERNEL
+ check_setting fstab && activate_value CONFIG_FSTAB || deactivate_value CONFIG_FSTAB
+ check_setting language && activate_value CONFIG_LANGUAGE || deactivate_value CONFIG_LANGUAGE
+ check_setting dma && activate_value CONFIG_DMA || deactivate_value CONFIG_DMA
+ check_setting mixer && activate_value CONFIG_MIXER || deactivate_value CONFIG_MIXER
+}
+
+# and now run it:
+ check_current_state
+ interface
+ retval=$?
+ case $retval in
+ 0)
+ set_values && dialog --stdout --title "${PN}" --msgbox "Adjusting values via grml-autoconfig was successful!" 5 60 || \
+ dialog --stdout --title "${PN}" --msgbox "There was an error adjusting values via grml-autoconfig. Sorry." 5 60
+ rm -f $TMPFILE &>/dev/null
+ ;;
+ 1)
+ echo "Exit pressed."
+ ;;
+ 255)
+ echo "ESC pressed."
+ exit 1
+ ;;
+ esac
+
+## END OF FILE #################################################################