1 # Filename: /etc/zsh/zshrc
2 # Purpose: config file for zsh (z shell)
3 # Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
4 # Bug-Reports: see http://grml.org/bugs/
5 # License: This file is licensed under the GPL v2.
6 ################################################################################
7 # This file is sourced only for interactive shells. It
8 # should contain commands to set up aliases, functions,
9 # options, key bindings, etc.
11 # Global Order: zshenv, zprofile, zshrc, zlogin
12 ################################################################################
15 # If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre
16 # and ~/.zshrc.local for your own customisations. The former file is read
17 # before ~/.zshrc, the latter is read after it. Also, consider reading the
18 # refcard and the reference manual for this setup, both available from:
19 # <http://grml.org/zsh/>
22 # If you want to help to improve grml's zsh setup, clone the grml-etc-core
23 # repository from git.grml.org:
24 # git clone git://git.grml.org/grml-etc-core.git
26 # Make your changes, commit them; use 'git format-patch' to create a series
27 # of patches and send those to the following address via 'git send-email':
28 # grml-etc-core@grml.org
30 # Doing so makes sure the right people get your patches for review and
33 # zsh-refcard-tag documentation:
34 # You may notice strange looking comments in this file.
35 # These are there for a purpose. grml's zsh-refcard can now be
36 # automatically generated from the contents of the actual configuration
37 # file. However, we need a little extra information on which comments
38 # and what lines of code to take into account (and for what purpose).
40 # Here is what they mean:
42 # List of tags (comment types) used:
43 # #a# Next line contains an important alias, that should
44 # be included in the grml-zsh-refcard.
45 # (placement tag: @@INSERT-aliases@@)
46 # #f# Next line contains the beginning of an important function.
47 # (placement tag: @@INSERT-functions@@)
48 # #v# Next line contains an important variable.
49 # (placement tag: @@INSERT-variables@@)
50 # #k# Next line contains an important keybinding.
51 # (placement tag: @@INSERT-keybindings@@)
52 # #d# Hashed directories list generation:
53 # start denotes the start of a list of 'hash -d'
55 # end denotes its end.
56 # (placement tag: @@INSERT-hasheddirs@@)
57 # #A# Abbreviation expansion list generation:
58 # start denotes the beginning of abbreviations.
59 # end denotes their end.
60 # Lines within this section that end in '#d .*' provide
61 # extra documentation to be included in the refcard.
62 # (placement tag: @@INSERT-abbrev@@)
63 # #m# This tag allows you to manually generate refcard entries
64 # for code lines that are hard/impossible to parse.
66 # #m# k ESC-h Call the run-help function
67 # That would add a refcard entry in the keybindings table
68 # for 'ESC-h' with the given comment.
69 # So the syntax is: #m# <section> <argument> <comment>
70 # #o# This tag lets you insert entries to the 'other' hash.
71 # Generally, this should not be used. It is there for
72 # things that cannot be done easily in another way.
73 # (placement tag: @@INSERT-other-foobar@@)
75 # All of these tags (except for m and o) take two arguments, the first
76 # within the tag, the other after the tag:
78 # #<tag><section># <comment>
80 # Where <section> is really just a number, which are defined by the
81 # @secmap array on top of 'genrefcard.pl'. The reason for numbers
82 # instead of names is, that for the reader, the tag should not differ
83 # much from a regular comment. For zsh, it is a regular comment indeed.
84 # The numbers have got the following meanings:
93 # So, the following will add an entry to the 'functions' table in the
94 # 'system' section, with a (hopefully) descriptive comment:
95 # #f1# Edit an alias via zle
98 # It will then show up in the @@INSERT-aliases-system@@ replacement tag
99 # that can be found in 'grml-zsh-refcard.tex.in'.
100 # If the section number is omitted, the 'default' section is assumed.
101 # Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is
102 # exactly the same as @@INSERT-aliases-default@@. If you want a list of
103 # *all* aliases, for example, use @@INSERT-aliases-all@@.
106 # just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details
107 if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then
111 # load .zshrc.pre to give the user the chance to overwrite the defaults
112 [[ -r ${ZDOTDIR:-${HOME}}/.zshrc.pre ]] && source ${ZDOTDIR:-${HOME}}/.zshrc.pre
114 # check for version/system
115 # check for versions (compatibility reasons)
117 [[ $ZSH_VERSION == <4->* ]] && return 0
122 [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0
127 [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0
132 [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
137 [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
142 [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* \
143 || $ZSH_VERSION == <5->* ]] && return 0
148 [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \
149 || $ZSH_VERSION == <5->* ]] && return 0
153 #f1# Checks whether or not you're running grml
155 [[ -f /etc/grml_version ]] && return 0
159 #f1# Checks whether or not you're running a grml cd
161 [[ -f /etc/grml_cd ]] && return 0
166 #f1# Checks whether or not you're running grml-small
168 if [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]]; then
174 isgrmlsmall() { return 1 }
178 [[ $OSTYPE == darwin* ]] && return 0
183 [[ $OSTYPE == freebsd* ]] && return 0
187 #f1# are we running within an utf environment?
189 case "$LANG $CHARSET $LANGUAGE" in
196 # check for user, if not running as root set $SUDO to sudo
197 (( EUID != 0 )) && SUDO='sudo' || SUDO=''
199 # change directory to home on first invocation of zsh
200 # important for rungetty -> autologin
201 # Thanks go to Bart Schaefer!
202 isgrml && checkhome() {
203 if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
204 export ALREADY_DID_CD_HOME=$HOME
209 # check for zsh v3.1.7+
211 if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
212 || ${ZSH_VERSION} == 3.<2->.<->* \
213 || ${ZSH_VERSION} == <4->.<->* ]] ; then
216 printf '-!- In this configuration we try to make use of features, that only\n'
217 printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
218 printf '-!- used with a wide range of zsh versions, while using fairly\n'
219 printf '-!- advanced features in all supported versions.\n'
221 printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
223 printf '-!- While this *may* work, it might as well fail.\n'
224 printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
226 printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
227 printf '-!- If it does today, you'\''ve been lucky.\n'
229 printf '-!- Ye been warned!\n'
232 function zstyle() { : }
235 # autoload wrapper - use this one instead of autoload directly
236 # We need to define this function as early as this, because autoloading
237 # 'is-at-least()' needs it.
238 function zrcautoload() {
246 for fdir in ${fpath} ; do
247 [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
250 (( ffound == 0 )) && return 1
251 if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
252 autoload -U ${ffile} || return 1
254 autoload ${ffile} || return 1
259 # Load is-at-least() for more precise version checks Note that this test will
260 # *always* fail, if the is-at-least function could not be marked for
262 zrcautoload is-at-least || is-at-least() { return 1 }
264 # set some important options (as early as possible)
266 # append history list to the history file; this is the default but we make sure
267 # because it's required for share_history.
268 setopt append_history
270 # import new commands from the history file also in other zsh-session
271 is4 && setopt share_history
273 # save each command's beginning timestamp and the duration to the history file
274 setopt extended_history
276 # If a new command line being added to the history list duplicates an older
277 # one, the older command is removed from the list
278 is4 && setopt histignorealldups
280 # remove command lines from the history list when the first character on the
282 setopt histignorespace
284 # if a command is issued that can't be executed as a normal command, and the
285 # command is the name of a directory, perform the cd command to that directory.
288 # in order to use #, ~ and ^ for filename generation grep word
289 # *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files
290 # don't forget to quote '^', '~' and '#'!
293 # display PID when suspending processes as well
296 # try to avoid the 'zsh: no matches found...'
299 # report the status of backgrounds jobs immediately
302 # whenever a command completion is attempted, make sure the entire command path
306 # not just at the end
307 setopt completeinword
309 # Don't send SIGHUP to background processes when the shell exits.
312 # make cd push the old directory onto the directory stack.
318 # don't push the same dir twice.
319 setopt pushd_ignore_dups
321 # * shouldn't match dotfiles. ever.
324 # use zsh style word splitting
327 # don't error out when unset parameters are used
330 # setting some default values
333 NOPRECMD=${NOPRECMD:-0}
334 COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
335 GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
336 BATTERY=${BATTERY:-0}
337 GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
338 ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
340 typeset -ga ls_options
341 typeset -ga grep_options
342 if ls --help 2> /dev/null | grep -q GNU; then
343 ls_options=( --color=auto )
344 elif [[ $OSTYPE == freebsd* ]]; then
347 if grep --help 2> /dev/null | grep -q GNU || \
348 [[ $OSTYPE == freebsd* ]]; then
349 grep_options=( --color=auto )
353 # this function checks if a command exists and returns either true
354 # or false. This avoids using 'which' and 'whence', which will
355 # avoid problems with aliases for which on certain weird systems. :-)
356 # Usage: check_com [-c|-g] word
357 # -c only checks for external commands
358 # -g does the usual tests and also checks for global aliases
361 local -i comonly gatoo
363 if [[ $1 == '-c' ]] ; then
366 elif [[ $1 == '-g' ]] ; then
373 if (( ${#argv} != 1 )) ; then
374 printf 'usage: check_com [-c] <command>\n' >&2
378 if (( comonly > 0 )) ; then
379 [[ -n ${commands[$1]} ]] && return 0
383 if [[ -n ${commands[$1]} ]] \
384 || [[ -n ${functions[$1]} ]] \
385 || [[ -n ${aliases[$1]} ]] \
386 || [[ -n ${reswords[(r)$1]} ]] ; then
391 if (( gatoo > 0 )) && [[ -n ${galiases[$1]} ]] ; then
398 # creates an alias and precedes the command with
399 # sudo if $EUID is not zero.
402 local only=0 ; local multi=0
403 while [[ $1 == -* ]] ; do
407 (--) shift ; break ;;
409 printf 'usage: salias [-h|-o|-a] <alias-expression>\n'
410 printf ' -h shows this help text.\n'
411 printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
412 printf ' be careful using this option.\n'
413 printf ' -o only sets an alias if a preceding sudo would be needed.\n'
416 (*) printf "unkown option: '%s'\n" "$1" ; return 1 ;;
421 if (( ${#argv} > 1 )) ; then
422 printf 'Too many arguments %s\n' "${#argv}"
426 key="${1%%\=*}" ; val="${1#*\=}"
427 if (( EUID == 0 )) && (( only == 0 )); then
428 alias -- "${key}=${val}"
429 elif (( EUID > 0 )) ; then
430 (( multi > 0 )) && val="${val// ; / ; sudo }"
431 alias -- "${key}=sudo ${val}"
437 # a "print -l ${(u)foo}"-workaround for pre-4.2.0 shells
439 # Where foo is the *name* of the parameter you want printed.
440 # Note that foo is no typo; $foo would be wrong here!
448 if [[ -z ${parameter} ]] ; then
449 printf 'usage: uprint <parameter>\n'
453 for w in ${(P)parameter} ; do
454 [[ -z ${(M)u:#$w} ]] && u=( $u $w )
461 # Check if we can read given files and source those we can.
463 if (( ${#argv} < 1 )) ; then
464 printf 'usage: xsource FILE(s)...\n' >&2
468 while (( ${#argv} > 0 )) ; do
469 [[ -r "$1" ]] && source "$1"
475 # Check if we can read a given file and 'cat(1)' it.
478 if (( ${#argv} != 1 )) ; then
479 printf 'usage: xcat FILE\n' >&2
483 [[ -r $1 ]] && cat $1
487 # Remove these functions again, they are of use only in these
488 # setup files. This should be called at the end of .zshrc.
492 funcs=(salias xcat xsource xunfunction zrcautoload)
494 for func in $funcs ; do
495 [[ -n ${functions[$func]} ]] \
501 # this allows us to stay in sync with grml's zshrc and put own
502 # modifications in ~/.zshrc.local
504 xsource "/etc/zsh/zshrc.local"
505 xsource "${ZDOTDIR:-${HOME}}/.zshrc.local"
510 if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then
511 xsource "/etc/default/locale"
514 for var in LANG LC_ALL LC_MESSAGES ; do
515 [[ -n ${(P)var} ]] && export $var
518 xsource "/etc/sysconfig/keyboard"
520 TZ=$(xcat /etc/timezone)
523 if check_com -c vim ; then
525 export EDITOR=${EDITOR:-vim}
527 export EDITOR=${EDITOR:-vi}
531 export PAGER=${PAGER:-less}
534 export MAIL=${MAIL:-/var/mail/$USER}
536 # if we don't set $SHELL then aterm, rxvt,.. will use /bin/sh or /bin/bash :-/
537 export SHELL='/bin/zsh'
539 # color setup for ls:
540 check_com -c dircolors && eval $(dircolors -b)
541 # color setup for ls on OS X / FreeBSD:
542 isdarwin && export CLICOLOR=1
543 isfreebsd && export CLICOLOR=1
545 # do MacPorts setup on darwin
546 if isdarwin && [[ -d /opt/local ]]; then
547 # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into
549 PATH="/opt/local/bin:/opt/local/sbin:$PATH"
550 MANPATH="/opt/local/share/man:$MANPATH"
552 # do Fink setup on darwin
553 isdarwin && xsource /sw/bin/init.sh
555 # load our function and completion directories
556 for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do
557 fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} )
558 if [[ ${fdir} == '/usr/share/grml/zsh/functions' ]] ; then
559 for func in ${fdir}/**/[^_]*[^~](N.) ; do
560 zrcautoload ${func:t}
566 # support colors in less
567 export LESS_TERMCAP_mb=$'\E[01;31m'
568 export LESS_TERMCAP_md=$'\E[01;31m'
569 export LESS_TERMCAP_me=$'\E[0m'
570 export LESS_TERMCAP_se=$'\E[0m'
571 export LESS_TERMCAP_so=$'\E[01;44;33m'
572 export LESS_TERMCAP_ue=$'\E[0m'
573 export LESS_TERMCAP_us=$'\E[01;32m'
578 # report about cpu-/system-/user-time of command if running longer than
582 # watch for everyone but me and root
585 # automatically remove duplicates from these arrays
586 typeset -U path cdpath fpath manpath
588 # Remove zle-line-{init,finish} if it looks like it turns smkx. This would be
589 # better fixed by working with those modes too, but we use way too many
590 # hardcoded bindings for now.
591 function remove_widget () {
594 if (( ${+functions[$name]} )) && [[ ${functions[$name]} == *${cap}* ]]; then
595 local w=${widgets[$name]}
597 [[ $w == user:* ]] && unfunction ${w#*:}
600 remove_widget zle-line-init smkx
601 remove_widget zle-line-finish rmkx
602 unfunction remove_widget
605 if [[ "$TERM" != emacs ]] ; then
606 [[ -z "$terminfo[kdch1]" ]] || bindkey -M emacs "$terminfo[kdch1]" delete-char
607 [[ -z "$terminfo[khome]" ]] || bindkey -M emacs "$terminfo[khome]" beginning-of-line
608 [[ -z "$terminfo[kend]" ]] || bindkey -M emacs "$terminfo[kend]" end-of-line
609 [[ -z "$terminfo[kdch1]" ]] || bindkey -M vicmd "$terminfo[kdch1]" vi-delete-char
610 [[ -z "$terminfo[khome]" ]] || bindkey -M vicmd "$terminfo[khome]" vi-beginning-of-line
611 [[ -z "$terminfo[kend]" ]] || bindkey -M vicmd "$terminfo[kend]" vi-end-of-line
612 [[ -z "$terminfo[cuu1]" ]] || bindkey -M viins "$terminfo[cuu1]" vi-up-line-or-history
613 [[ -z "$terminfo[cuf1]" ]] || bindkey -M viins "$terminfo[cuf1]" vi-forward-char
614 [[ -z "$terminfo[kcuu1]" ]] || bindkey -M viins "$terminfo[kcuu1]" vi-up-line-or-history
615 [[ -z "$terminfo[kcud1]" ]] || bindkey -M viins "$terminfo[kcud1]" vi-down-line-or-history
616 [[ -z "$terminfo[kcuf1]" ]] || bindkey -M viins "$terminfo[kcuf1]" vi-forward-char
617 [[ -z "$terminfo[kcub1]" ]] || bindkey -M viins "$terminfo[kcub1]" vi-backward-char
619 [[ "$terminfo[kcuu1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcuu1]/O/[}" vi-up-line-or-history
620 [[ "$terminfo[kcud1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcud1]/O/[}" vi-down-line-or-history
621 [[ "$terminfo[kcuf1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcuf1]/O/[}" vi-forward-char
622 [[ "$terminfo[kcub1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcub1]/O/[}" vi-backward-char
623 [[ "$terminfo[khome]" == $'\eO'* ]] && bindkey -M viins "${terminfo[khome]/O/[}" beginning-of-line
624 [[ "$terminfo[kend]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kend]/O/[}" end-of-line
625 [[ "$terminfo[khome]" == $'\eO'* ]] && bindkey -M emacs "${terminfo[khome]/O/[}" beginning-of-line
626 [[ "$terminfo[kend]" == $'\eO'* ]] && bindkey -M emacs "${terminfo[kend]/O/[}" end-of-line
629 ## keybindings (run 'bindkeys' for details, more details via man zshzle)
630 # use emacs style per default:
635 ## beginning-of-line OR beginning-of-buffer OR beginning of history
636 ## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach
637 beginning-or-end-of-somewhere() {
639 if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \
640 ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then
641 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
643 zle .${WIDGET:s/somewhere/line-hist/} "$@"
644 if (( HISTNO != hno )); then
645 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
649 zle -N beginning-of-somewhere beginning-or-end-of-somewhere
650 zle -N end-of-somewhere beginning-or-end-of-somewhere
653 #if [[ "$TERM" == screen ]] ; then
655 ## with HOME/END, move to beginning/end of line (on multiline) on first keypress
656 ## to beginning/end of buffer on second keypress
657 ## and to beginning/end of history on (at most) the third keypress
658 # terminator & non-debian xterm
659 bindkey '\eOH' beginning-of-somewhere # home
660 bindkey '\eOF' end-of-somewhere # end
662 bindkey '\e[H' beginning-of-somewhere # home
663 bindkey '\e[F' end-of-somewhere # end
664 # xterm,gnome-terminal,quake,etc
665 bindkey '^[[1~' beginning-of-somewhere # home
666 bindkey '^[[4~' end-of-somewhere # end
667 # if terminal type is set to 'rxvt':
668 bindkey '\e[7~' beginning-of-somewhere # home
669 bindkey '\e[8~' end-of-somewhere # end
672 bindkey '\e[A' up-line-or-search # cursor up
673 bindkey '\e[B' down-line-or-search # <ESC>-
675 ## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on the CL
676 bindkey "\e[5C" forward-word
677 bindkey "\e[5D" backward-word
678 bindkey "\e[1;5C" forward-word
679 bindkey "\e[1;5D" backward-word
680 ## the same for alt-left-arrow and alt-right-arrow
681 bindkey '^[[1;3C' forward-word
682 bindkey '^[[1;3D' backward-word
684 # Search backward in the history for a line beginning with the current
685 # line up to the cursor and move the cursor to the end of the line then
686 zle -N history-beginning-search-backward-end history-search-end
687 zle -N history-beginning-search-forward-end history-search-end
688 #k# search history backward for entry beginning with typed text
689 bindkey '^xp' history-beginning-search-backward-end
690 #k# search history forward for entry beginning with typed text
691 bindkey '^xP' history-beginning-search-forward-end
692 #k# search history backward for entry beginning with typed text
693 bindkey "\e[5~" history-beginning-search-backward-end # PageUp
694 #k# search history forward for entry beginning with typed text
695 bindkey "\e[6~" history-beginning-search-forward-end # PageDown
697 # bindkey -s '^l' "|less\n" # ctrl-L pipes to less
698 # bindkey -s '^b' " &\n" # ctrl-B runs it in the background
700 # insert unicode character
701 # usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
702 # See for example http://unicode.org/charts/ for unicode characters code
703 zrcautoload insert-unicode-char
704 zle -N insert-unicode-char
705 #k# Insert Unicode character
706 bindkey '^xi' insert-unicode-char
708 #m# k Shift-tab Perform backwards menu completion
709 if [[ -n "$terminfo[kcbt]" ]]; then
710 bindkey "$terminfo[kcbt]" reverse-menu-complete
711 elif [[ -n "$terminfo[cbt]" ]]; then # required for GNU screen
712 bindkey "$terminfo[cbt]" reverse-menu-complete
715 ## toggle the ,. abbreviation feature on/off
716 # NOABBREVIATION: default abbreviation-state
717 # 0 - enabled (default)
719 NOABBREVIATION=${NOABBREVIATION:-0}
721 grml_toggle_abbrev() {
722 if (( ${NOABBREVIATION} > 0 )) ; then
729 #k# Toggle abbreviation expansion on/off
730 zle -N grml_toggle_abbrev
731 bindkey '^xA' grml_toggle_abbrev
733 # add a command line to the shells history without executing it
734 commit-to-history() {
735 print -s ${(z)BUFFER}
738 zle -N commit-to-history
739 bindkey "^x^h" commit-to-history
741 # only slash should be considered as a word separator:
742 slash-backward-kill-word() {
743 local WORDCHARS="${WORDCHARS:s@/@}"
745 zle backward-kill-word
747 zle -N slash-backward-kill-word
749 #k# Kill left-side word or everything up to next slash
750 bindkey '\ev' slash-backward-kill-word
751 #k# Kill left-side word or everything up to next slash
752 bindkey '\e^h' slash-backward-kill-word
753 #k# Kill left-side word or everything up to next slash
754 bindkey '\e^?' slash-backward-kill-word
756 # use the new *-pattern-* widgets for incremental history search
758 bindkey '^r' history-incremental-pattern-search-backward
759 bindkey '^s' history-incremental-pattern-search-forward
762 # a generic accept-line wrapper
764 # This widget can prevent unwanted autocorrections from command-name
765 # to _command-name, rehash automatically on enter and call any number
766 # of builtin and user-defined widgets in different contexts.
768 # For a broader description, see:
769 # <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html>
771 # The code is imported from the file 'zsh/functions/accept-line' from
772 # <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which
773 # distributed under the same terms as zsh itself.
775 # A newly added command will may not be found or will cause false
776 # correction attempts, if you got auto-correction set. By setting the
777 # following style, we force accept-line() to rehash, if it cannot
778 # find the first word on the command line in the $command[] hash.
779 zstyle ':acceptline:*' rehash true
781 function Accept-Line() {
782 setopt localoptions noksharrays
786 local alcontext=${1:-$alcontext}
788 zstyle -a ":acceptline:${alcontext}" actions subs
790 (( ${#subs} < 1 )) && return 0
793 for sub in ${subs} ; do
794 [[ ${sub} == 'accept-line' ]] && sub='.accept-line'
797 (( aldone > 0 )) && break
801 function Accept-Line-getdefault() {
805 zstyle -s ":acceptline:${alcontext}" default_action default_action
806 case ${default_action} in
808 printf ".accept-line"
811 printf ${default_action}
816 function Accept-Line-HandleContext() {
819 default_action=$(Accept-Line-getdefault)
820 zstyle -T ":acceptline:${alcontext}" call_default \
821 && zle ${default_action}
824 function accept-line() {
825 setopt localoptions noksharrays
828 local buf com fname format msg default_action
832 cmdline=(${(z)BUFFER})
836 Accept-Line 'preprocess'
838 zstyle -t ":acceptline:${alcontext}" rehash \
839 && [[ -z ${commands[$com]} ]] \
843 && [[ -n ${reswords[(r)$com]} ]] \
844 || [[ -n ${aliases[$com]} ]] \
845 || [[ -n ${functions[$com]} ]] \
846 || [[ -n ${builtins[$com]} ]] \
847 || [[ -n ${commands[$com]} ]] ; then
849 # there is something sensible to execute, just do it.
851 Accept-Line-HandleContext
856 if [[ -o correct ]] \
857 || [[ -o correctall ]] \
858 && [[ -n ${functions[$fname]} ]] ; then
860 # nothing there to execute but there is a function called
861 # _command_name; a completion widget. Makes no sense to
862 # call it on the commandline, but the correct{,all} options
863 # will ask for it nevertheless, so warn the user.
864 if [[ ${LASTWIDGET} == 'accept-line' ]] ; then
865 # Okay, we warned the user before, he called us again,
866 # so have it his way.
868 Accept-Line-HandleContext
873 if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then
875 Accept-Line-HandleContext
877 # prepare warning message for the user, configurable via zstyle.
878 zstyle -s ":acceptline:${alcontext}" compwarnfmt msg
880 if [[ -z ${msg} ]] ; then
881 msg="%c will not execute and completion %f exists."
884 zformat -f msg "${msg}" "c:${com}" "f:${fname}"
889 elif [[ -n ${buf//[$' \t\n']##/} ]] ; then
890 # If we are here, the commandline contains something that is not
891 # executable, which is neither subject to _command_name correction
892 # and is not empty. might be a variable assignment
894 Accept-Line-HandleContext
899 # If we got this far, the commandline only contains whitespace, or is empty.
901 Accept-Line-HandleContext
906 zle -N Accept-Line-HandleContext
908 # power completion - abbreviation expansion
909 # power completion / abbreviation expansion / buffer expansion
910 # see http://zshwiki.org/home/examples/zleiab for details
911 # less risky than the global aliases but powerful as well
912 # just type the abbreviation key and afterwards ',.' to expand it
915 setopt interactivecomments
917 # key # value (#d additional doc string)
923 'G' '|& grep '${grep_options:+"${grep_options[*]}"}
925 'Hl' ' --help |& less -r' #d (Display help in pager)
929 'N' '&>/dev/null' #d (No Output)
930 'R' '| tr A-z N-za-m' #d (ROT13)
936 'co' './configure && make && sudo make install'
944 if (( NOABBREVIATION > 0 )) ; then
945 LBUFFER="${LBUFFER},."
949 LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#}
950 LBUFFER+=${abk[$MATCH]:-$MATCH}
953 zle -N zleiab && bindkey ",." zleiab
955 #f# display contents of assoc array $abk
958 zle -M "$(print "Type ,. after these abbreviations to expand them:"; print -a -C 2 ${(kv)abk})"
960 #k# Display list of abbreviations that expand when followed by ,.
961 zle -N help-show-abk && bindkey '^xb' help-show-abk
964 zrcautoload zmv # who needs mmv or rename?
965 zrcautoload history-search-end
967 # we don't want to quote/espace URLs on our own...
968 # if autoload -U url-quote-magic ; then
969 # zle -N self-insert url-quote-magic
970 # zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}='
972 # print 'Notice: no url-quote-magic available :('
974 alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic'
976 #m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
977 alias run-help >&/dev/null && unalias run-help
978 for rh in run-help{,-git,-svk,-svn}; do
983 if zrcautoload compinit ; then
984 compinit || print 'Notice: no compinit available :('
986 print 'Notice: no compinit available :('
990 is4 && zrcautoload zed # use ZLE editor to edit a file or function
993 for mod in complist deltochar mathfunc ; do
994 zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
997 # autoload zsh modules when they are referenced
999 zmodload -a zsh/stat zstat
1000 zmodload -a zsh/zpty zpty
1001 zmodload -ap zsh/mapfile mapfile
1004 if is4 && zrcautoload insert-files && zle -N insert-files ; then
1005 #k# Insert files and test globbing
1006 bindkey "^xf" insert-files # C-x-f
1009 bindkey ' ' magic-space # also do history expansion on space
1010 #k# Trigger menu-complete
1011 bindkey '\ei' menu-complete # menu completion via esc-i
1013 # press esc-e for editing command line in $EDITOR or $VISUAL
1014 if is4 && zrcautoload edit-command-line && zle -N edit-command-line ; then
1015 #k# Edit the current line in \kbd{\$EDITOR}
1016 bindkey '\ee' edit-command-line
1019 if is4 && [[ -n ${(k)modules[zsh/complist]} ]] ; then
1020 #k# menu selection: pick item but stay in the menu
1021 bindkey -M menuselect '\e^M' accept-and-menu-complete
1022 # also use + and INSERT since it's easier to press repeatedly
1023 bindkey -M menuselect "+" accept-and-menu-complete
1024 bindkey -M menuselect "^[[2~" accept-and-menu-complete
1026 # accept a completion and try to complete again by using menu
1027 # completion; very useful with completing directories
1028 # by using 'undo' one's got a simple file browser
1029 bindkey -M menuselect '^o' accept-and-infer-next-history
1032 # press "ctrl-e d" to insert the actual date in the form yyyy-mm-dd
1033 insert-datestamp() { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; }
1034 zle -N insert-datestamp
1036 #k# Insert a timestamp on the command line (yyyy-mm-dd)
1037 bindkey '^ed' insert-datestamp
1039 # press esc-m for inserting last typed word again (thanks to caphuso!)
1040 insert-last-typed-word() { zle insert-last-word -- 0 -1 };
1041 zle -N insert-last-typed-word;
1043 #k# Insert last typed word
1044 bindkey "\em" insert-last-typed-word
1046 function grml-zsh-fg() {
1047 if (( ${#jobstates} )); then
1049 [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER=''
1050 BUFFER="${BUFFER}fg"
1053 zle -M 'No background jobs. Doing nothing.'
1057 #k# A smart shortcut for \kbd{fg<enter>}
1058 bindkey '^z' grml-zsh-fg
1060 # run command line as user root via sudo:
1061 sudo-command-line() {
1062 [[ -z $BUFFER ]] && zle up-history
1063 if [[ $BUFFER != sudo\ * ]]; then
1064 BUFFER="sudo $BUFFER"
1065 CURSOR=$(( CURSOR+5 ))
1068 zle -N sudo-command-line
1070 #k# prepend the current command with "sudo"
1071 bindkey "^os" sudo-command-line
1073 ### jump behind the first word on the cmdline.
1074 ### useful to add options.
1075 function jump_after_first_word() {
1077 words=(${(z)BUFFER})
1079 if (( ${#words} <= 1 )) ; then
1082 CURSOR=${#${words[1]}}
1085 zle -N jump_after_first_word
1086 #k# jump to after first word (for adding options)
1087 bindkey '^x1' jump_after_first_word
1089 # complete word from history with menu (from Book: ZSH, OpenSource-Press)
1090 zle -C hist-complete complete-word _generic
1091 zstyle ':completion:hist-complete:*' completer _history
1092 #k# complete word from history with menu
1093 bindkey "^x^x" hist-complete
1095 ## complete word from currently visible Screen or Tmux buffer.
1096 if check_com -c screen || check_com -c tmux; then
1097 _complete_screen_display() {
1098 [[ "$TERM" != "screen" ]] && return 1
1100 local TMPFILE=$(mktemp)
1101 local -U -a _screen_display_wordlist
1102 trap "rm -f $TMPFILE" EXIT
1104 # fill array with contents from screen hardcopy
1105 if ((${+TMUX})); then
1106 #works, but crashes tmux below version 1.4
1107 #luckily tmux -V option to ask for version, was also added in 1.4
1108 tmux -V &>/dev/null || return
1109 tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0
1111 screen -X hardcopy $TMPFILE
1112 # screen sucks, it dumps in latin1, apparently always. so recode it
1114 check_com recode && recode latin1 $TMPFILE
1116 _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} )
1117 # remove PREFIX to be completed from that array
1118 _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]=""
1119 compadd -a _screen_display_wordlist
1121 #k# complete word from currently visible GNU screen buffer
1123 compdef -k _complete_screen_display complete-word '^xS'
1128 ZSHDIR=${ZDOTDIR:-${HOME}/.zsh}
1131 HISTFILE=${ZDOTDIR:-${HOME}}/.zsh_history
1132 isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
1133 isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
1137 DIRSTACKSIZE=${DIRSTACKSIZE:-20}
1138 DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs}
1140 if [[ -f ${DIRSTACKFILE} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
1141 dirstack=( ${(f)"$(< $DIRSTACKFILE)"} )
1142 # "cd -" won't work after login by just setting $OLDPWD, so
1143 [[ -d $dirstack[1] ]] && cd $dirstack[1] && cd $OLDPWD
1148 my_stack=( ${PWD} ${dirstack} )
1150 builtin print -l ${(u)my_stack} >! ${DIRSTACKFILE}
1152 uprint my_stack >! ${DIRSTACKFILE}
1156 # directory based profiles
1160 # chpwd_profiles(): Directory Profiles, Quickstart:
1164 # zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
1165 # zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
1168 # For details see the `grmlzshrc.5' manual page.
1169 function chpwd_profiles() {
1170 local profile context
1173 context=":chpwd:profiles:$PWD"
1174 zstyle -s "$context" profile profile || profile='default'
1175 zstyle -T "$context" re-execute && reexecute=1 || reexecute=0
1177 if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then
1178 typeset -g CHPWD_PROFILE
1179 local CHPWD_PROFILES_INIT=1
1180 (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init
1181 elif [[ $profile != $CHPWD_PROFILE ]]; then
1182 (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \
1183 && chpwd_leave_profile_${CHPWD_PROFILE}
1185 if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then
1186 (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile}
1189 CHPWD_PROFILE="${profile}"
1193 chpwd_functions=( ${chpwd_functions} chpwd_profiles )
1197 # display battery status on right side of prompt via running 'BATTERY=1 zsh'
1198 if [[ $BATTERY -gt 0 ]] ; then
1199 if ! check_com -c acpi ; then
1205 if [[ $BATTERY -gt 0 ]] ; then
1206 PERCENT="${${"$(acpi 2>/dev/null)"}/(#b)[[:space:]]#Battery <->: [^0-9]##, (<->)%*/${match[1]}}"
1207 if [[ -z "$PERCENT" ]] ; then
1208 PERCENT='acpi not present'
1210 if [[ "$PERCENT" -lt 20 ]] ; then
1211 PERCENT="warning: ${PERCENT}%%"
1213 PERCENT="${PERCENT}%%"
1218 # set colors for use in prompts
1219 if zrcautoload colors && colors 2>/dev/null ; then
1220 BLUE="%{${fg[blue]}%}"
1221 RED="%{${fg_bold[red]}%}"
1222 GREEN="%{${fg[green]}%}"
1223 CYAN="%{${fg[cyan]}%}"
1224 MAGENTA="%{${fg[magenta]}%}"
1225 YELLOW="%{${fg[yellow]}%}"
1226 WHITE="%{${fg[white]}%}"
1227 NO_COLOR="%{${reset_color}%}"
1229 BLUE=$'%{\e[1;34m%}'
1231 GREEN=$'%{\e[1;32m%}'
1232 CYAN=$'%{\e[1;36m%}'
1233 WHITE=$'%{\e[1;37m%}'
1234 MAGENTA=$'%{\e[1;35m%}'
1235 YELLOW=$'%{\e[1;33m%}'
1236 NO_COLOR=$'%{\e[0m%}'
1239 # gather version control information for inclusion in a prompt
1241 if zrcautoload vcs_info; then
1242 # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath'
1243 # function, which can cause a lot of trouble with our directory-based
1245 if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then
1246 function VCS_INFO_realpath () {
1247 setopt localoptions NO_shwordsplit chaselinks
1248 ( builtin cd -q $1 2> /dev/null && pwd; )
1252 zstyle ':vcs_info:*' max-exports 2
1254 if [[ -o restricted ]]; then
1255 zstyle ':vcs_info:*' enable NONE
1259 # Change vcs_info formats for the grml prompt. The 2nd format sets up
1260 # $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
1261 # TODO: The included vcs_info() version still uses $VCS_INFO_message_N_.
1262 # That needs to be the use of $VCS_INFO_message_N_ needs to be changed
1263 # to $vcs_info_msg_N_ as soon as we use the included version.
1264 if [[ "$TERM" == dumb ]] ; then
1265 zstyle ':vcs_info:*' actionformats "(%s%)-[%b|%a] " "zsh: %r"
1266 zstyle ':vcs_info:*' formats "(%s%)-[%b] " "zsh: %r"
1268 # these are the same, just with a lot of colors:
1269 zstyle ':vcs_info:*' actionformats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} " \
1271 zstyle ':vcs_info:*' formats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR}%} " \
1273 zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "%b${RED}:${YELLOW}%r"
1276 # command not found handling
1278 (( ${COMMAND_NOT_FOUND} == 1 )) &&
1279 function command_not_found_handler() {
1281 if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then
1282 ${GRML_ZSH_CNF_HANDLER} $1
1287 function prompt_grml_help () {
1291 This is the prompt as used by the grml-live system <http://grml.org>. It is
1292 a rather simple one-line prompt, that by default looks something like this:
1294 <user>@<host> <current-working-directory>[ <vcs_info-data>]%
1296 The prompt itself integrates with zsh's prompt themes system (as you are
1297 witnessing right now) and is configurable to a certain degree. In
1298 particular, these aspects are customisable:
1300 - The items used in the prompt (e.g. you can remove \`user' from
1301 the list of activated items, which will cause the user name to
1302 be omitted from the prompt string).
1304 - The attributes used with the items are customisable via strings
1305 used before and after the actual item.
1307 The available items are: rc, rc-always, change-root, user, at, host, path,
1308 vcs, percent, sad-smiley, battery.
1310 The actual configuration is done via zsh's \`zstyle' mechanism. The
1311 context, that is used while looking up styles is:
1313 ':prompt:grml:<left-or-right>:<subcontext>'
1315 Here <left-or-right> is either \`left' or \`right', signifying whether the
1316 style should affect the left or the right prompt. <subcontext> is either
1317 \`setup' or 'items:<item>', where \`<item>' is one of the available items.
1321 - use-rprompt (boolean): If \`true' (the default), print a sad smiley
1322 in $RPROMPT if the last command a returned non-successful error code.
1323 (This in only valid if <left-or-right> is "right"; ignored otherwise)
1325 - items (list): The list of items used in the prompt. If \`vcs' is
1326 present in the list, the theme's code invokes \`vcs_info'
1327 accordingly. Default: rc user change-root at host path vcs precent
1329 Available styles in 'items:<item>' are: pre, post. These are strings that
1330 are inserted before (pre) and after (post) the item in question. Thus, the
1331 following would cause the user name to be printed in red instead of the
1334 zstyle ':prompt:grml:*:items:user' pre '%F{red}'
1336 Note, that the \`post' style may remain at its default value, because its
1337 default value is '%f', which turns the foreground text attribute off (which
1338 is exactly, what is still required with the new \`pre' value).
1342 function prompt_grml_setup () {
1344 autoload -Uz vcs_info
1345 autoload -Uz add-zsh-hook
1346 add-zsh-hook precmd prompt_grml_precmd
1349 typeset -gA grml_prompt_pre_default \
1350 grml_prompt_post_default \
1351 grml_prompt_token_default
1353 grml_prompt_pre_default=(
1367 grml_prompt_post_default=(
1381 grml_prompt_token_default=(
1384 change-root 'debian_chroot'
1391 sad-smiley '%(?..:()'
1395 function grml_typeset_and_wrap () {
1402 if (( ${+parameters[$new]} )); then
1403 typeset -g "${target}=${(P)target}${left}${(P)new}${right}"
1407 function grml_prompt_addto () {
1410 local lr it apre apost new v
1414 [[ $target == PS1 ]] && lr=left || lr=right
1415 zstyle -a ":prompt:${grmltheme}:${lr}:setup" items items || items=( "$@" )
1416 typeset -g "${target}="
1417 for it in "${items[@]}"; do
1418 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \
1419 || apre=${grml_prompt_pre_default[$it]}
1420 zstyle -s ":prompt:grml:${grmltheme}:${lr}:$it" post apost \
1421 || apost=${grml_prompt_post_default[$it]}
1422 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \
1423 || new=${grml_prompt_token_default[$it]}
1424 typeset -g "${target}=${(P)target}${apre}"
1427 grml_typeset_and_wrap $target $new '' ''
1430 grml_typeset_and_wrap $target $new '(' ')'
1433 v="vcs_info_msg_${new}_"
1434 if (( ! vcscalled )); then
1438 if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then
1439 typeset -g "${target}=${(P)target}${(P)v}"
1442 *) typeset -g "${target}=${(P)target}${new}" ;;
1444 typeset -g "${target}=${(P)target}${apost}"
1448 function prompt_grml_precmd () {
1450 local -i vcscalled=0
1451 local grmltheme=grml
1453 grml_prompt_addto PS1 rc change-root user at host path vcs percent
1454 if zstyle -T ":prompt:${grmltheme}:right:setup" use-rprompt; then
1455 grml_prompt_addto RPS1 sad-smiley
1460 if zrcautoload promptinit && promptinit 2>/dev/null ; then
1461 promptinit # people should be able to use their favourite prompt
1463 # Since we define the required functions in here and not in files in
1464 # $fpath, we need to stick the theme's name into `$prompt_themes'
1465 # ourselves, since promptinit does not pick them up otherwise.
1466 prompt_themes+=( grml )
1467 # Also, keep the array sorted...
1468 prompt_themes=( "${(@on)prompt_themes}" )
1470 if [[ $BATTERY -gt 0 ]]; then
1471 zstyle ':prompt:grml:right:setup' items sad-smiley battery
1472 add-zsh-hook precmd battery
1475 print 'Notice: no promptinit available :('
1480 # make sure to use right prompt only when not running a command
1481 is41 && setopt transient_rprompt
1484 function ESC_print () {
1485 info_print $'\ek' $'\e\\' "$@"
1487 function set_title () {
1488 info_print $'\e]0;' $'\a' "$@"
1491 function info_print () {
1492 local esc_begin esc_end
1496 printf '%s' ${esc_begin}
1498 printf '%s' "${esc_end}"
1501 function grml_reset_screen_title () {
1502 # adjust title of xterm
1503 # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
1504 [[ ${NOTITLE:-} -gt 0 ]] && return 0
1507 set_title ${(%):-"%n@%m: %~"}
1512 function grml_vcs_to_screen_title () {
1513 if [[ $TERM == screen* ]] ; then
1514 if [[ -n ${vcs_info_msg_1_} ]] ; then
1515 ESC_print ${vcs_info_msg_1_}
1522 zrcautoload add-zsh-hook || add-zsh-hook () { :; }
1523 if [[ $NOPRECMD -gt 0 ]]; then
1524 add-zsh-hook precmd grml_reset_screen_title
1525 add-zsh-hook precmd grml_vcs_to_screen_title
1528 # preexec() => a function running before every command
1529 is4 && [[ $NOPRECMD -eq 0 ]] && \
1531 [[ $NOPRECMD -gt 0 ]] && return 0
1532 # set hostname if not running on host with name 'grml'
1533 if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then
1536 # get the name of the program currently running and hostname of local machine
1537 # set screen window title if running in a screen
1538 if [[ "$TERM" == screen* ]] ; then
1539 # local CMD=${1[(wr)^(*=*|sudo|ssh|-*)]} # don't use hostname
1540 local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME" # use hostname
1543 # adjust title of xterm
1544 [[ ${NOTITLE} -gt 0 ]] && return 0
1547 set_title "${(%):-"%n@%m:"}" "$1"
1552 EXITCODE="%(?..%?%1v )"
1553 # secondary prompt, printed when the shell needs more information to complete a
1556 # selection prompt used within a select loop.
1558 # the execution trace prompt (setopt xtrace). default: '+%N:%i>'
1561 # set variable debian_chroot if running in a chroot with /etc/debian_chroot
1562 if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
1563 debian_chroot=$(cat /etc/debian_chroot)
1566 # don't use colors on dumb terminals (like emacs):
1567 if [[ "$TERM" == dumb ]] ; then
1568 PROMPT="${EXITCODE}${debian_chroot:+($debian_chroot)}%n@%m %40<...<%B%~%b%<< "
1570 # only if $GRMLPROMPT is set (e.g. via 'GRMLPROMPT=1 zsh') use the extended
1571 # prompt set variable identifying the chroot you work in (used in the
1573 if [[ $GRMLPROMPT -gt 0 ]] ; then
1574 PROMPT="${RED}${EXITCODE}${CYAN}[%j running job(s)] ${GREEN}{history#%!} ${RED}%(3L.+.) ${BLUE}%* %D
1575 ${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "
1577 # This assembles the primary prompt string
1578 if (( EUID != 0 )); then
1579 PROMPT="${RED}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "
1581 PROMPT="${BLUE}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${RED}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "
1586 PROMPT="${PROMPT}"'${vcs_info_msg_0_}'"%# "
1588 # if we are inside a grml-chroot set a specific prompt theme
1589 if [[ -n "$GRML_CHROOT" ]] ; then
1590 PROMPT="%{$fg[red]%}(CHROOT) %{$fg_bold[red]%}%n%{$fg_no_bold[white]%}@%m %40<...<%B%~%b%<< %\# "
1593 # 'hash' some often used directories
1595 hash -d deb=/var/cache/apt/archives
1596 hash -d doc=/usr/share/doc
1597 hash -d linux=/lib/modules/$(command uname -r)/build/
1598 hash -d log=/var/log
1599 hash -d slog=/var/log/syslog
1600 hash -d src=/usr/src
1601 hash -d templ=/usr/share/doc/grml-templates
1602 hash -d tt=/usr/share/doc/texttools-doc
1603 hash -d www=/var/www
1607 if check_com -c screen ; then
1608 if [[ $UID -eq 0 ]] ; then
1609 if [[ -r /etc/grml/screenrc ]]; then
1610 alias screen="${commands[screen]} -c /etc/grml/screenrc"
1612 elif [[ -r $HOME/.screenrc ]] ; then
1613 alias screen="${commands[screen]} -c $HOME/.screenrc"
1615 if [[ -r /etc/grml/screenrc_grml ]]; then
1616 alias screen="${commands[screen]} -c /etc/grml/screenrc_grml"
1618 if [[ -r /etc/grml/screenrc ]]; then
1619 alias screen="${commands[screen]} -c /etc/grml/screenrc"
1625 # do we have GNU ls with color-support?
1626 if [[ "$TERM" != dumb ]]; then
1627 #a1# execute \kbd{@a@}:\quad ls with colors
1628 alias ls='ls -b -CF '${ls_options:+"${ls_options[*]}"}
1629 #a1# execute \kbd{@a@}:\quad list all files, with colors
1630 alias la='ls -la '${ls_options:+"${ls_options[*]}"}
1631 #a1# long colored list, without dotfiles (@a@)
1632 alias ll='ls -l '${ls_options:+"${ls_options[*]}"}
1633 #a1# long colored list, human readable sizes (@a@)
1634 alias lh='ls -hAl '${ls_options:+"${ls_options[*]}"}
1635 #a1# List files, append qualifier to filenames \\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
1636 alias l='ls -lF '${ls_options:+"${ls_options[*]}"}
1638 alias ls='ls -b -CF'
1645 alias mdstat='cat /proc/mdstat'
1646 alias ...='cd ../../'
1648 # generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
1649 if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
1650 alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
1653 # see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
1654 alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
1655 alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
1657 # make sure it is not assigned yet
1658 [[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
1661 for ENV in $(env | command grep -i '.utf') ; do
1662 eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
1667 # make sure it is not assigned yet
1668 [[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
1670 if ! isutfenv ; then
1671 for ENV in $(env | command grep -i '\.iso') ; do
1672 eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
1677 # especially for roadwarriors using GNU screen and ssh:
1678 if ! check_com asc &>/dev/null ; then
1679 asc() { autossh -t "$@" 'screen -RdU' }
1683 #f1# Hints for the use of zsh on grml
1685 print "$bg[white]$fg[black]
1686 zsh-help - hints for use of zsh on grml
1687 =======================================$reset_color"
1690 Main configuration of zsh happens in /etc/zsh/zshrc.
1691 That file is part of the package grml-etc-core, if you want to
1692 use them on a non-grml-system just get the tar.gz from
1693 http://deb.grml.org/ or (preferably) get it from the git repository:
1695 http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
1697 This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
1698 The file is still there, but it is empty for backwards compatibility.
1700 For your own changes use these two files:
1704 The former is sourced very early in our zshrc, the latter is sourced
1707 System wide configuration without touching configuration files of grml
1708 can take place in /etc/zsh/zshrc.local.
1710 For information regarding zsh start at http://grml.org/zsh/
1712 Take a look at grml'\''s zsh refcard:
1713 % xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
1715 Check out the main zsh refcard:
1716 % '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
1718 And of course visit the zsh-lovers:
1721 You can adjust some options through environment variables when
1722 invoking zsh without having to edit configuration files.
1723 Basically meant for bash users who are not used to the power of
1726 "NOCOR=1 zsh" => deactivate automatic correction
1727 "NOMENU=1 zsh" => do not use auto menu completion
1728 (note: use ctrl-d for completion instead!)
1729 "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
1730 "NOTITLE=1 zsh" => disable setting the title of xterms without disabling
1731 preexec() and precmd() completely
1732 "BATTERY=1 zsh" => activate battery status (via acpi) on right side of prompt
1733 "COMMAND_NOT_FOUND=1 zsh"
1734 => Enable a handler if an external command was not found
1735 The command called in the handler can be altered by setting
1736 the GRML_ZSH_CNF_HANDLER variable, the default is:
1737 "/usr/share/command-not-found/command-not-found"
1739 A value greater than 0 is enables a feature; a value equal to zero
1740 disables it. If you like one or the other of these settings, you can
1741 add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
1745 $bg[white]$fg[black]
1746 Please report wishes + bugs to the grml-team: http://grml.org/bugs/
1747 Enjoy your grml system with the zsh!$reset_color"
1751 if [[ -r /etc/debian_version ]] ; then
1752 #a3# Execute \kbd{apt-cache search}
1753 alias acs='apt-cache search'
1754 #a3# Execute \kbd{apt-cache show}
1755 alias acsh='apt-cache show'
1756 #a3# Execute \kbd{apt-cache policy}
1757 alias acp='apt-cache policy'
1758 #a3# Execute \kbd{apt-get dist-upgrade}
1759 salias adg="apt-get dist-upgrade"
1760 #a3# Execute \kbd{apt-get install}
1761 salias agi="apt-get install"
1762 #a3# Execute \kbd{aptitude install}
1763 salias ati="aptitude install"
1764 #a3# Execute \kbd{apt-get upgrade}
1765 salias ag="apt-get upgrade"
1766 #a3# Execute \kbd{apt-get update}
1767 salias au="apt-get update"
1768 #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
1769 salias -a up="aptitude update ; aptitude safe-upgrade"
1770 #a3# Execute \kbd{dpkg-buildpackage}
1771 alias dbp='dpkg-buildpackage'
1772 #a3# Execute \kbd{grep-excuses}
1773 alias ge='grep-excuses'
1775 # get a root shell as normal user in live-cd mode:
1776 if isgrmlcd && [[ $UID -ne 0 ]] ; then
1780 #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog}
1781 salias llog="$PAGER /var/log/syslog" # take a look at the syslog
1782 #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog}
1783 salias tlog="tail -f /var/log/syslog" # follow the syslog
1786 # sort installed Debian-packages by size
1787 if check_com -c dpkg-query ; then
1788 #a3# List installed Debian-packages sorted by size
1789 alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
1792 # if cdrecord is a symlink (to wodim) or isn't present at all warn:
1793 if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
1794 if check_com -c wodim; then
1797 cdrecord is not provided under its original name by Debian anymore.
1798 See #377109 in the BTS of Debian for more details.
1800 Please use the wodim binary instead
1807 # Use hard limits, except for a smaller stack and no core dumps
1809 is425 && limit stack 8192
1810 isgrmlcd && limit core 0 # important for a live-cd-system
1815 # called later (via is4 && grmlcomp)
1816 # note: use 'zstyle' for getting current settings
1817 # press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output
1819 # TODO: This could use some additional information
1821 # allow one error for every three characters typed in approximate completer
1822 zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )'
1824 # don't complete backup files as executables
1825 zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)'
1827 # start menu completion only if it could find no unambiguous initial string
1828 zstyle ':completion:*:correct:*' insert-unambiguous true
1829 zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}'
1830 zstyle ':completion:*:correct:*' original true
1832 # activate color-completion
1833 zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
1835 # format on completion
1836 zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}'
1838 # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu
1839 # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select
1841 # insert all expansions for expand completer
1842 zstyle ':completion:*:expand:*' tag-order all-expansions
1843 zstyle ':completion:*:history-words' list false
1846 zstyle ':completion:*:history-words' menu yes
1848 # ignore duplicate entries
1849 zstyle ':completion:*:history-words' remove-all-dups yes
1850 zstyle ':completion:*:history-words' stop yes
1852 # match uppercase from lowercase
1853 zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
1855 # separate matches into groups
1856 zstyle ':completion:*:matches' group 'yes'
1857 zstyle ':completion:*' group-name ''
1859 if [[ "$NOMENU" -eq 0 ]] ; then
1860 # if there are more than 5 options allow selecting from a menu
1861 zstyle ':completion:*' menu select=5
1863 # don't use any menus at all
1867 zstyle ':completion:*:messages' format '%d'
1868 zstyle ':completion:*:options' auto-description '%d'
1870 # describe options in full
1871 zstyle ':completion:*:options' description 'yes'
1873 # on processes completion complete all user processes
1874 zstyle ':completion:*:processes' command 'ps -au$USER'
1876 # offer indexes before parameters in subscripts
1877 zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters
1879 # provide verbose completion information
1880 zstyle ':completion:*' verbose true
1882 # recent (as of Dec 2007) zsh versions are able to provide descriptions
1883 # for commands (read: 1st word in the line) that it will list for the user
1884 # to choose from. The following disables that, because it's not exactly fast.
1885 zstyle ':completion:*:-command-:*:' verbose false
1887 # set format for warnings
1888 zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d'
1890 # define files to ignore for zcompile
1891 zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)'
1892 zstyle ':completion:correct:' prompt 'correct to: %e'
1894 # Ignore completion functions for commands you don't have:
1895 zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
1897 # Provide more processes in completion of programs like killall:
1898 zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
1900 # complete manual by their section
1901 zstyle ':completion:*:manuals' separate-sections true
1902 zstyle ':completion:*:manuals.*' insert-sections true
1903 zstyle ':completion:*:man:*' menu yes select
1905 # Search path for sudo completion
1906 zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \
1914 # provide .. as a completion
1915 zstyle ':completion:*' special-dirs ..
1917 # run rehash on completion so new installed program are found automatically:
1919 (( CURRENT == 1 )) && rehash
1924 # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
1925 if [[ "$NOCOR" -gt 0 ]] ; then
1926 zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored
1929 # try to be smart about when to use what completer...
1931 zstyle -e ':completion:*' completer '
1932 if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then
1933 _last_try="$HISTNO$BUFFER$CURSOR"
1934 reply=(_complete _match _ignored _prefix _files)
1936 if [[ $words[1] == (rm|mv) ]] ; then
1937 reply=(_complete _files)
1939 reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files)
1944 # command for process lists, the local web server details and host completion
1945 zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
1948 [[ -d $ZSHDIR/cache ]] && zstyle ':completion:*' use-cache yes && \
1949 zstyle ':completion::complete:*' cache-path $ZSHDIR/cache/
1953 [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
1954 [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
1965 zstyle ':completion:*:hosts' hosts $hosts
1966 # TODO: so, why is this here?
1967 # zstyle '*' hosts $hosts
1969 # use generic completion system for programs not yet defined; (_gnu_generic works
1970 # with commands that provide a --help option with "standard" gnu-like output.)
1971 for compcom in cp deborphan df feh fetchipac head hnb ipacsum mv \
1972 pal stow tail uname ; do
1973 [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
1976 # see upgrade function in this file
1977 compdef _hosts upgrade
1982 # people should use 'grml-x'!
1983 if check_com -c 915resolution; then
1985 echo "Please use 915resolution as resolution modifying tool for Intel \
1991 #a1# Output version of running grml
1992 alias grml-version='cat /etc/grml_version'
1994 if check_com -c rebuildfstab ; then
1995 #a1# Rebuild /etc/fstab
1996 alias grml-rebuildfstab='rebuildfstab -v -r -config'
1999 if check_com -c grml-debootstrap ; then
2001 echo "Installing debian to harddisk is possible by using grml-debootstrap."
2007 # now run the functions
2009 is4 && isgrml && grmlstuff
2013 is4 && xsource "/etc/zsh/keephack"
2015 # wonderful idea of using "e" glob qualifier by Peter Stephenson
2016 # You use it as follows:
2017 # $ NTREF=/reference/file
2019 # This lists all the files in the current directory newer than the reference file.
2020 # You can also specify the reference file inline; note quotes:
2021 # $ ls -l *(e:'nt ~/.zshenv':)
2023 if [[ -n $1 ]] ; then
2026 [[ $REPLY -nt $NTREF ]]
2031 #f1# Reload an autoloadable function
2032 freload() { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
2033 compdef _functions freload
2035 #f1# List symlinks in detail (more detailed version of 'readlink -f' and 'whence -s')
2037 [[ -z "$1" ]] && printf 'Usage: %s <file(s)>\n' "$0" && return 1
2038 for file in "$@" ; do
2039 while [[ -h "$file" ]] ; do
2041 file=$(readlink "$file")
2046 # TODO: Is it supported to use pager settings like this?
2047 # PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
2048 # with respect to wordsplitting. (ie. ${=PAGER})
2049 if check_com -c $PAGER ; then
2050 #f1# View Debian's changelog of a given package
2053 if [[ -r /usr/share/doc/$1/changelog.Debian.gz ]] ; then
2054 $PAGER /usr/share/doc/$1/changelog.Debian.gz
2055 elif [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
2056 $PAGER /usr/share/doc/$1/changelog.gz
2058 if check_com -c aptitude ; then
2059 echo "No changelog for package $1 found, using aptitude to retrieve it."
2061 aptitude -t unstable changelog $1
2063 aptitude changelog $1
2066 echo "No changelog for package $1 found, sorry."
2071 _dchange() { _files -W /usr/share/doc -/ }
2072 compdef _dchange dchange
2074 #f1# View Debian's NEWS of a given package
2077 if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
2078 $PAGER /usr/share/doc/$1/NEWS.Debian.gz
2080 if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
2081 $PAGER /usr/share/doc/$1/NEWS.gz
2083 echo "No NEWS file for package $1 found, sorry."
2088 _dnews() { _files -W /usr/share/doc -/ }
2089 compdef _dnews dnews
2091 #f1# View Debian's copyright of a given package
2094 if [[ -r /usr/share/doc/$1/copyright ]] ; then
2095 $PAGER /usr/share/doc/$1/copyright
2097 echo "No copyright file for package $1 found, sorry."
2101 _dcopyright() { _files -W /usr/share/doc -/ }
2102 compdef _dcopyright dcopyright
2104 #f1# View upstream's changelog of a given package
2107 if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
2108 $PAGER /usr/share/doc/$1/changelog.gz
2110 echo "No changelog for package $1 found, sorry."
2114 _uchange() { _files -W /usr/share/doc -/ }
2115 compdef _uchange uchange
2120 ZSH_PROFILE_RC=1 $SHELL "$@"
2123 #f1# Edit an alias via zle
2125 [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
2127 compdef _aliases edalias
2129 #f1# Edit a function via zle
2131 [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ;
2133 compdef _functions edfunc
2135 # use it e.g. via 'Restart apache2'
2136 #m# f6 Start() \kbd{/etc/init.d/\em{process}}\quad\kbd{start}
2137 #m# f6 Restart() \kbd{/etc/init.d/\em{process}}\quad\kbd{restart}
2138 #m# f6 Stop() \kbd{/etc/init.d/\em{process}}\quad\kbd{stop}
2139 #m# f6 Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{reload}
2140 #m# f6 Force-Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{force-reload}
2141 #m# f6 Status() \kbd{/etc/init.d/\em{process}}\quad\kbd{status}
2142 if [[ -d /etc/init.d || -d /etc/service ]] ; then
2144 local action_="${1:l}" # e.g Start/Stop/Restart
2148 local service_target_="$(readlink /etc/init.d/$service_)"
2149 if [[ $service_target_ == "/usr/bin/sv" ]]; then
2151 case "${action_}" in
2152 start) if [[ ! -e /etc/service/$service_ ]]; then
2153 $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
2155 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
2157 # there is no reload in runits sysv emulation
2158 reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
2159 *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
2163 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
2169 scripts=( /etc/init.d/*(x:t) )
2170 _describe "service startup script" scripts
2173 for i in Start Restart Stop Force-Reload Reload Status ; do
2174 eval "$i() { __start_stop $i \"\$1\" \"\$2\" ; }"
2175 compdef _grmlinitd $i
2179 #f1# Provides useful information on globbing
2186 p named pipes (FIFOs)
2187 * executable plain files (0100)
2188 % device files (character or block special)
2189 %b block special files
2190 %c character special files
2191 r owner-readable files (0400)
2192 w owner-writable files (0200)
2193 x owner-executable files (0100)
2194 A group-readable files (0040)
2195 I group-writable files (0020)
2196 E group-executable files (0010)
2197 R world-readable files (0004)
2198 W world-writable files (0002)
2199 X world-executable files (0001)
2200 s setuid files (04000)
2201 S setgid files (02000)
2202 t files with the sticky bit (01000)
2204 print *(m-1) # Files modified up to a day ago
2205 print *(a1) # Files accessed a day ago
2206 print *(@) # Just symlinks
2207 print *(Lk+50) # Files bigger than 50 kilobytes
2208 print *(Lk-50) # Files smaller than 50 kilobytes
2209 print **/*.c # All *.c files recursively starting in \$PWD
2210 print **/*.c~file.c # Same as above, but excluding 'file.c'
2211 print (foo|bar).* # Files starting with 'foo' or 'bar'
2212 print *~*.* # All Files that do not contain a dot
2213 chmod 644 *(.^x) # make all plain non-executable files publically readable
2214 print -l *(.c|.h) # Lists *.c and *.h
2215 print **/*(g:users:) # Recursively match all files that are owned by group 'users'
2216 echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
2218 alias help-zshglob=H-Glob
2220 #v1# set number of lines to display per page
2221 HELP_LINES_PER_PAGE=20
2222 #v1# set location of help-zle cache file
2223 HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh
2224 #f1# helper function for help-zle, actually generates the help text
2225 help_zle_parse_keybindings()
2229 unsetopt ksharrays #indexing starts at 1
2231 #v1# choose files that help-zle will parse for keybindings
2232 ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local )
2234 if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
2236 for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
2237 [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
2240 #fill with default keybindings, possibly to be overwriten in a file later
2241 #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later
2242 local -A help_zle_keybindings
2243 help_zle_keybindings['<Ctrl>@']="set MARK"
2244 help_zle_keybindings['<Ctrl>x<Ctrl>j']="vi-join lines"
2245 help_zle_keybindings['<Ctrl>x<Ctrl>b']="jump to matching brace"
2246 help_zle_keybindings['<Ctrl>x<Ctrl>u']="undo"
2247 help_zle_keybindings['<Ctrl>_']="undo"
2248 help_zle_keybindings['<Ctrl>x<Ctrl>f<c>']="find <c> in cmdline"
2249 help_zle_keybindings['<Ctrl>a']="goto beginning of line"
2250 help_zle_keybindings['<Ctrl>e']="goto end of line"
2251 help_zle_keybindings['<Ctrl>t']="transpose charaters"
2252 help_zle_keybindings['<Alt>t']="transpose words"
2253 help_zle_keybindings['<Alt>s']="spellcheck word"
2254 help_zle_keybindings['<Ctrl>k']="backward kill buffer"
2255 help_zle_keybindings['<Ctrl>u']="forward kill buffer"
2256 help_zle_keybindings['<Ctrl>y']="insert previously killed word/string"
2257 help_zle_keybindings["<Alt>'"]="quote line"
2258 help_zle_keybindings['<Alt>"']="quote from mark to cursor"
2259 help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')"
2260 help_zle_keybindings['<Alt>u']="make next word Uppercase"
2261 help_zle_keybindings['<Alt>l']="make next word lowercase"
2262 help_zle_keybindings['<Ctrl>xd']="preview expansion under cursor"
2263 help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL"
2264 help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs"
2265 help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)"
2266 help_zle_keybindings['<Alt>m']="repeat last typed word on current CL"
2267 help_zle_keybindings['<Ctrl>v']="insert next keypress symbol literally (e.g. for bindkey)"
2268 help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command"
2269 help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)"
2270 help_zle_keybindings['<Alt>h']="show help/manpage for current command"
2272 #init global variables
2273 unset help_zle_lines help_zle_sln
2274 typeset -g -a help_zle_lines
2275 typeset -g help_zle_sln=1
2278 local lastkeybind_desc contents #last description starting with #k# that we found
2279 local num_lines_elapsed=0 #number of lines between last description and keybinding
2280 #search config files in the order they a called (and thus the order in which they overwrite keybindings)
2281 for f in $HELPZLE_KEYBINDING_FILES; do
2282 [[ -r "$f" ]] || continue #not readable ? skip it
2284 for cline in "${(f)contents}"; do
2285 #zsh pattern: matches lines like: #k# ..............
2286 if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
2287 lastkeybind_desc="$match[*]"
2289 #zsh pattern: matches lines that set a keybinding using bindkey or compdef -k
2290 # ignores lines that are commentend out
2291 # grabs first in '' or "" enclosed string with length between 1 and 6 characters
2292 elif [[ "$cline" == [^#]#(bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
2293 #description prevously found ? description not more than 2 lines away ? keybinding not empty ?
2294 if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
2295 #substitute keybinding string with something readable
2296 k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>}
2297 #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files
2298 #Note that we are extracting the keybinding-string including the quotes (see Note at beginning)
2299 help_zle_keybindings[${k}]=$lastkeybind_desc
2303 ((num_lines_elapsed++))
2308 #calculate length of keybinding column
2310 for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k}
2311 #convert the assoc array into preformated lines, which we are able to sort
2312 for k v in ${(kv)help_zle_keybindings[@]}; do
2313 #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes)
2314 help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}")
2316 #sort lines alphabetically
2317 help_zle_lines=("${(i)help_zle_lines[@]}")
2318 [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}"
2319 echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE
2320 zcompile $HELP_ZLE_CACHE_FILE
2322 typeset -g help_zle_sln
2323 typeset -g -a help_zle_lines
2325 #f1# Provides (partially autogenerated) help on keybindings and the zsh line editor
2329 unsetopt ksharrays #indexing starts at 1
2330 #help lines already generated ? no ? then do it
2331 [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings}
2332 #already displayed all lines ? go back to the start
2333 [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1
2334 local sln=$help_zle_sln
2335 #note that help_zle_sln is a global var, meaning we remember the last page we viewed
2336 help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE))
2337 zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}"
2339 #k# display help for keybindings and ZLE (cycle pages with consecutive use)
2340 zle -N help-zle && bindkey '^xz' help-zle
2342 # grep for running process, like: 'any vim'
2346 if [[ -z "$1" ]] ; then
2347 echo "any - grep for process(es) by keyword" >&2
2348 echo "Usage: any <keyword>" >&2 ; return 1
2350 ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}"
2355 # After resuming from suspend, system is paging heavily, leading to very bad interactivity.
2356 # taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
2357 [[ -r /proc/1/maps ]] && \
2359 print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
2360 cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
2361 print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
2364 # a wrapper for vim, that deals with title setting
2366 # set this array to a set of options to vim you always want
2367 # to have set when calling vim (in .zshrc.local), like:
2368 # VIM_OPTIONS=( -p )
2369 # This will cause vim to send every file given on the
2370 # commandline to be send to it's own tab (needs vim7).
2371 if check_com vim; then
2373 VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
2377 # make a backup of a file
2379 cp -a "$1" "${1}_$(date --iso-8601=seconds)"
2382 ssl_hashes=( sha512 sha256 sha1 md5 )
2384 for sh in ${ssl_hashes}; do
2385 eval 'ssl-cert-'${sh}'() {
2387 if [[ -z $1 ]] ; then
2388 printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'"
2391 openssl x509 -noout -fingerprint -'${sh}' -in $1
2395 ssl-cert-fingerprints() {
2398 if [[ -z $1 ]] ; then
2399 printf 'usage: ssl-cert-fingerprints <file>\n'
2402 for i in ${ssl_hashes}
2409 if [[ -z $1 ]] ; then
2410 printf 'usage: ssl-cert-info <file>\n'
2413 openssl x509 -noout -text -in $1
2414 ssl-cert-fingerprints $1
2417 # make sure our environment is clean regarding colors
2418 for color in BLUE RED GREEN CYAN YELLOW MAGENTA WHITE ; unset $color
2420 # "persistent history"
2421 # just write important commands you always need to ~/.important_commands
2422 if [[ -r ~/.important_commands ]] ; then
2423 fc -R ~/.important_commands
2426 # load the lookup subsystem if it's available on the system
2427 zrcautoload lookupinit && lookupinit
2431 # set terminal property (used e.g. by msgid-chooser)
2432 export COLORTERM="yes"
2437 #a2# Execute \kbd{du -sch}
2439 #a2# Execute \kbd{jobs -l}
2443 #a2# Execute \kbd{ls -lSrah}
2444 alias dir="ls -lSrah"
2445 #a2# Only show dot-directories
2446 alias lad='ls -d .*(/)'
2447 #a2# Only show dot-files
2448 alias lsa='ls -a .*(.)'
2449 #a2# Only files with setgid/setuid/sticky flag
2450 alias lss='ls -l *(s,S,t)'
2451 #a2# Only show symlinks
2452 alias lsl='ls -l *(@)'
2453 #a2# Display only executables
2454 alias lsx='ls -l *(*)'
2455 #a2# Display world-{readable,writable,executable} files
2456 alias lsw='ls -ld *(R,W,X.^ND/)'
2457 #a2# Display the ten biggest files
2458 alias lsbig="ls -flh *(.OL[1,10])"
2459 #a2# Only show directories
2460 alias lsd='ls -d *(/)'
2461 #a2# Only show empty directories
2462 alias lse='ls -d *(/^F)'
2463 #a2# Display the ten newest files
2464 alias lsnew="ls -rtlh *(D.om[1,10])"
2465 #a2# Display the ten oldest files
2466 alias lsold="ls -rtlh *(D.Om[1,10])"
2467 #a2# Display the ten smallest files
2468 alias lssmall="ls -Srl *(.oL[1,10])"
2469 #a2# Display the ten newest directories and ten newest .directories
2470 alias lsnewdir="ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
2471 #a2# Display the ten oldest directories and ten oldest .directories
2472 alias lsolddir="ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
2474 # some useful aliases
2475 #a2# Remove current empty directory. Execute \kbd{cd ..; rmdir $OLDCWD}
2476 alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
2478 #a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
2479 alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
2480 alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
2482 # work around non utf8 capable software in utf environment via $LANG and luit
2483 if check_com isutfenv && check_com luit ; then
2484 if check_com -c mrxvt ; then
2485 isutfenv && [[ -n "$LANG" ]] && \
2486 alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
2489 if check_com -c aterm ; then
2490 isutfenv && [[ -n "$LANG" ]] && \
2491 alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
2494 if check_com -c centericq ; then
2495 isutfenv && [[ -n "$LANG" ]] && \
2496 alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
2502 #f5# Backup \kbd{file {\rm to} file\_timestamp}
2505 cp -b $1 $1_`date --iso-8601=m`
2508 #f5# cd to directoy and list files
2514 # smart cd function, allows switching to /etc when running 'cd /etc/fstab'
2516 if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
2517 [[ ! -e ${1:h} ]] && return 1
2518 print "Correcting ${1} to ${1:h}"
2525 #f5# Create Directoy and \kbd{cd} to it
2527 if (( ARGC != 1 )); then
2528 printf 'usage: mkcd <new-directory>\n'
2531 if [[ ! -d "$1" ]]; then
2532 command mkdir -p "$1"
2534 printf '`%s'\'' already exists: cd-ing.\n' "$1"
2539 #f5# Create temporary directory and \kbd{cd} to it
2547 #f5# Create directory under cursor or the selected area
2548 # Press ctrl-xM to create the directory under the cursor or the selected area.
2549 # To select an area press ctrl-@ or ctrl-space and use the cursor.
2550 # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
2551 # directory does not exist yet -> press ctrl-XM and problem solved
2554 if ((REGION_ACTIVE==1)); then
2555 local F=$MARK T=$CURSOR
2556 if [[ $F -gt $T ]]; then
2560 # get marked area from buffer and eliminate whitespace
2561 PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##}
2562 PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##}
2564 local bufwords iword
2565 bufwords=(${(z)LBUFFER})
2567 bufwords=(${(z)BUFFER})
2568 PATHTOMKDIR="${(Q)bufwords[iword]}"
2570 [[ -z "${PATHTOMKDIR}" ]] && return 1
2571 PATHTOMKDIR=${~PATHTOMKDIR}
2572 if [[ -e "${PATHTOMKDIR}" ]]; then
2573 zle -M " path already exists, doing nothing"
2575 zle -M "$(mkdir -p -v "${PATHTOMKDIR}")"
2579 #k# mkdir -p <dir> from string under cursor or marked area
2580 zle -N inplaceMkDirs && bindkey '^xM' inplaceMkDirs
2582 #f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
2585 print -l -- *(a-${1:-1})
2588 #f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
2591 print -l -- *(c-${1:-1})
2594 #f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
2597 print -l -- *(m-${1:-1})
2599 # modified() was named new() in earlier versions, add an alias for backwards compatibility
2600 check_com new || alias new=modified
2602 # use colors when GNU grep with color-support
2603 #a2# Execute \kbd{grep -{}-color=auto}
2604 (( $#grep_options > 0 )) && alias grep='grep '${grep_options:+"${grep_options[*]}"}
2607 # 'translate' looks up fot a word in a file with language-to-language
2608 # translations (field separator should be " : "). A typical wordlist looks
2610 # | english-word : german-transmission
2611 # It's also only possible to translate english to german but not reciprocal.
2612 # Use the following oneliner to turn back the sort order:
2613 # $ awk -F ':' '{ print $2" : "$1" "$3 }' \
2614 # /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
2615 #f5# Translates a word
2620 translate -l de-en $2
2623 translate -l en-de $2
2626 echo "Usage: $0 { -D | -E }"
2627 echo " -D == German to English"
2628 echo " -E == English to German"
2632 # Usage: simple-extract <file>
2633 # Using option -d deletes the original archive file.
2634 #f5# Smart archive extractor
2637 setopt extended_glob noclobber
2638 local DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
2640 zparseopts -D -E "d=DELETE_ORIGINAL"
2641 for ARCHIVE in "${@}"; do
2643 *(tar.bz2|tbz2|tbz))
2644 DECOMP_CMD="tar -xvjf -"
2649 DECOMP_CMD="tar -xvzf -"
2653 *(tar.xz|txz|tar.lzma))
2654 DECOMP_CMD="tar -xvJf -"
2659 DECOMP_CMD="tar -xvf -"
2664 DECOMP_CMD="unrar x"
2689 DECOMP_CMD="bzip2 -d -c -"
2694 DECOMP_CMD="gzip -d -c -"
2699 DECOMP_CMD="xz -d -c -"
2704 print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
2710 if ! check_com ${DECOMP_CMD[(w)1]}; then
2711 echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
2716 GZTARGET="${ARCHIVE:t:r}"
2717 if [[ -f $ARCHIVE ]] ; then
2719 print "Extracting '$ARCHIVE' ..."
2720 if $USES_STDIN; then
2721 if $USES_STDOUT; then
2722 ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
2724 ${=DECOMP_CMD} < "$ARCHIVE"
2727 if $USES_STDOUT; then
2728 ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
2730 ${=DECOMP_CMD} "$ARCHIVE"
2733 [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
2735 elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
2736 if check_com curl; then
2737 WGET_CMD="curl -L -k -s -o -"
2738 elif check_com wget; then
2739 WGET_CMD="wget -q -O - --no-check-certificate"
2741 print "ERROR: neither wget nor curl is installed" >&2
2745 print "Downloading and Extracting '$ARCHIVE' ..."
2746 if $USES_STDIN; then
2747 if $USES_STDOUT; then
2748 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
2751 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
2755 if $USES_STDOUT; then
2756 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
2758 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
2763 print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
2773 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
2774 '_urls:Remote Archives:_urls'
2780 '-d[delete original archivefile after extraction]' \
2781 '*:Archive Or Uri:__archive_or_uri'
2783 compdef _simple_extract simple-extract
2784 alias se=simple-extract
2786 #f5# Set all ulimit parameters to \kbd{unlimited}
2797 #f5# Change the xterm title from within GNU-screen
2800 if [[ $1 != "-f" ]] ; then
2801 if [[ -z ${DISPLAY} ]] ; then
2802 printf 'xtrename only makes sense in X11.\n'
2808 if [[ -z $1 ]] ; then
2809 printf 'usage: xtrename [-f] "title for xterm"\n'
2810 printf ' renames the title of xterm from _within_ screen.\n'
2811 printf ' also works without screen.\n'
2812 printf ' will not work if DISPLAY is unset, use -f to override.\n'
2815 print -n "\eP\e]0;${1}\C-G\e\\"
2819 # Create small urls via http://goo.gl using curl(1).
2820 # API reference: https://code.google.com/apis/urlshortener/
2823 setopt extended_glob
2825 if [[ -z $1 ]]; then
2826 print "USAGE: zurl <URL>"
2830 local PN url prog api json contenttype item
2835 # Prepend 'http://' to given URL where necessary for later output.
2836 if [[ ${url} != http(s|)://* ]]; then
2840 if check_com -c curl; then
2843 print "curl is not available, but mandatory for ${PN}. Aborting."
2846 api='https://www.googleapis.com/urlshortener/v1/url'
2847 contenttype="Content-Type: application/json"
2848 json="{\"longUrl\": \"${url}\"}"
2849 data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"})
2850 # Parse the response
2851 for item in "${data[@]}"; do
2856 printf '%s\n' "$item"
2864 #f2# Find history events by search pattern and list them by date.
2867 local usage help ident format_l format_s first_char remain first last
2868 usage='USAGE: whatwhen [options] <searchstring> <search range>'
2869 help='Use `whatwhen -h'\'' for further explanations.'
2870 ident=${(l,${#${:-Usage: }},, ,)}
2871 format_l="${ident}%s\t\t\t%s\n"
2872 format_s="${format_l//(\\t)##/\\t}"
2873 # Make the first char of the word to search for case
2874 # insensitive; e.g. [aA]
2875 first_char=[${(L)1[1]}${(U)1[1]}]
2877 # Default search range is `-100'.
2879 # Optional, just used for `<first> <last>' given.
2883 printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
2884 printf '%s\n%s\n\n' ${usage} ${help} && return 1
2887 printf '%s\n\n' ${usage}
2889 printf $format_l '-h' 'show help text'
2891 print 'SEARCH RANGE:'
2892 printf $format_l "'0'" 'the whole history,'
2893 printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
2894 printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
2895 printf '\n%s\n' 'EXAMPLES:'
2896 printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
2897 printf $format_l 'whatwhen zsh -250'
2898 printf $format_l 'whatwhen foo 1 99'
2901 printf '%s\n%s\n\n' ${usage} ${help} && return 1
2904 # -l list results on stout rather than invoking $EDITOR.
2905 # -i Print dates as in YYYY-MM-DD.
2906 # -m Search for a - quoted - pattern within the history.
2907 fc -li -m "*${first_char}${remain}*" $first $last
2912 # mercurial related stuff
2913 if check_com -c hg ; then
2914 # gnu like diff for mercurial
2915 # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
2916 #f5# GNU like diff for mercurial
2919 for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
2922 # build debian package
2923 #a2# Alias for \kbd{hg-buildpackage}
2924 alias hbp='hg-buildpackage'
2926 # execute commands on the versioned patch-queue from the current repos
2927 alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
2929 # diffstat for specific version of a mercurial repository
2930 # hgstat => display diffstat between last revision and tip
2931 # hgstat 1234 => display diffstat between revision 1234 and tip
2932 #f5# Diffstat for specific version of a mercurial repos
2935 [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
2938 fi # end of check whether we have the 'hg'-executable
2940 # grml-small cleanups
2942 # The following is used to remove zsh-config-items that do not work
2943 # in grml-small by default.
2944 # If you do not want these adjustments (for whatever reason), set
2945 # $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
2946 # sources if it is there).
2948 if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
2951 unalias 'V' &> /dev/null
2952 unfunction vman &> /dev/null
2953 unfunction viless &> /dev/null
2954 unfunction 2html &> /dev/null
2956 # manpages are not in grmlsmall
2957 unfunction manzsh &> /dev/null
2958 unfunction man2 &> /dev/null
2964 ## genrefcard.pl settings
2966 ### doc strings for external functions from files
2967 #m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
2969 ### example: split functions-search 8,16,24,32
2970 #@# split functions-search 8
2972 ## END OF FILE #################################################################
2973 # vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4