**DIRSTACKFILE**.
== DIRECTORY BASED PROFILES ==
-If you want certain settings to be active in certain directories (and
-automatically switch back and forth between them), this is what you want.
+
+If you need to perform certain actions each time you enter certain
+directory-trees, this is the feature you are looking for.
+
+
+=== Initialisation ===
+To initialise the system, you need to call the function `chpwd_profiles' at
+some point in your `zshrc.local'; preferably **after** you configured the
+system. The configuration of the system is described further below.
+
+If you need to do initialisations the first time `chpwd_profiles' is called
+(which should be in your configuration file), you can do that in a function
+called "chpwd_profiles_init". That function needs to be defined **before**
+`chpwd_profiles' is called for this to work.
+
+During the **first** call of `chpwd_profiles' (and therefore all its profile
+functions) the parameter `$CHPWD_PROFILES_INIT' exists and is set to `1'. In
+all other cases, the parameter does not exist at all.
+
+
+=== Styles and Profile-names ===
+To store its configuration, the system uses **functions** and **styles**
+(zsh's context sensitive configuration system), such as this:
+
\
```
zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
```
-When that's done and you enter a directory that matches the pattern
-in the third part of the context, a function called chpwd_profile_grml,
-for example, is called (if it exists).
+When that's done and you enter a directory that matches the pattern in the
+third part of the context, a function called chpwd_profile_grml, for example,
+is called (if it exists).
-If no pattern matches (read: no profile is detected) the profile is
-set to 'default', which means chpwd_profile_default is attempted to
-be called.
+If no pattern matches (read: no profile is detected) the profile is set to
+'default', which means chpwd_profile_default is attempted to be called.
-A word about the context (the ':chpwd:profiles:*' stuff in the zstyle
-command) which is used: The third part in the context is matched against
-**$PWD**. That's why using a pattern such as /foo/bar(|/|/*) makes sense.
-Because that way the profile is detected for all these values of **$PWD**:
+A word about the context (the ':chpwd:profiles:*' stuff in the zstyle command)
+which is used: The third part in the context is matched against ${PWD}. That's
+why using a pattern such as /foo/bar(|/|/*) makes sense. Because that way the
+profile is detected for all these values of ${PWD}:
\
```
-/foo/bar
-/foo/bar/
-/foo/bar/baz
+ /foo/bar
+ /foo/bar/
+ /foo/bar/baz
```
-
-So, if you want to make double damn sure a profile works in /foo/bar
-and everywhere deeper in that tree, just use (|/|/*) and be happy.
+So, if you want to make double damn sure a profile works in /foo/bar and
+everywhere deeper in that tree, just use (|/|/*) and be happy.
The name of the detected profile will be available in a variable called
-'profile' in your functions. You don't need to do anything, it'll just
-be there.
+'profile' in your functions. You don't need to do anything, it'll just be
+there.
+
+
+=== Controlling Profile Execution ===
-Then there is the parameter **$CHPWD_PROFILE** which is set to the profile,
-that was active up to now. That way you can avoid running code for a
-profile that is already active, by running code such as the following
-at the start of your function:
+During its initialisation run, the system creates a parameter $CHPWD_PROFILE,
+which is set to the profile that was is currently active (the default value is
+"default"). That way you can avoid running code for a profile that is already
+active, by running code such as the following at the start of your function:
\
```
function chpwd_profile_grml() {
[[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
- ...
+ ...
}
```
-The initial value for **$CHPWD_PROFILE** is 'default'.
+If you know you are going to do that all the time for each and every
+directory-profile function you are ever going to write, you may also set the
+`re-execute' style to `false' (which only defaults to `true' for backwards
+compatibility), like this:
+\
+```
+ zstyle ':chpwd:profiles:*' re-execute false
+```
+
=== Signaling availabily/profile changes ===
-If you use this feature and need to know whether it is active in your
-current shell, there are several ways to do that. Here are two simple
-ways:
+If you use this feature and need to know whether it is active in your current
+shell, there are several ways to do that. Here are two simple ways:
-a) If knowing if the profiles feature is active when zsh starts is
- good enough for you, you can put the following snippet into your
- //.zshrc.local//:
-\
-```
-(( ${+functions[chpwd_profiles]} )) &&
- print "directory profiles active"
-```
+a) If knowing if the profiles feature is active when zsh starts is good
+enough for you, you can use the following snippet:
+
+(( ${+functions[chpwd_profiles]} )) && print "directory profiles active"
+
+b) If that is not good enough, and you would prefer to be notified whenever a
+profile changes, you can solve that by making sure you start **every**
+profile function you create like this:
-b) If that is not good enough, and you would prefer to be notified
- whenever a profile changes, you can solve that by making sure you
- start **every** profile function you create like this:
-\
-```
function chpwd_profile_myprofilename() {
[[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
print "chpwd(): Switching to profile: $profile"
...
}
-```
-That makes sure you only get notified if a profile is **changed**,
-not everytime you change directory.
+That makes sure you only get notified if a profile is **changed**, not
+everytime you change directory. (To avoid this, you may also set the newer
+`re-execute' style like described further above instead of the test on top of
+the function.
+
+
+=== Leaving Profiles ===
+
+When the system switches from one profile to another, it executes a function
+named "chpwd_leave_profile_<PREVIOUS-PROFILE-NAME>()" before calling the
+profile-function for the new profile.
+
=== Version requirement ===
This feature requires zsh //4.3.3// or newer.
if is433 ; then
-# chpwd_profiles(): Directory Profiles
+# chpwd_profiles(): Directory Profiles, Quickstart:
#
-# Say you want certain settings to be active in certain directories. This is
-# what you want.
+# In .zshrc.local:
#
-# To get it working you will need this function and something along the
-# following lines:
-#
-# chpwd_functions+=( chpwd_profiles )
+# zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
+# zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
# chpwd_profiles
#
-# You will usually want to do that *after* you configured the system. That
-# configuration is described below.
-#
-# zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
-# zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
-#
-# When that's done and you enter a directory that matches the pattern in the
-# third part of the context, a function called chpwd_profile_grml, for example,
-# is called (if it exists).
-#
-# If no pattern patches (read: no profile is detected) the profile is set to
-# 'default', which means chpwd_profile_default is attempted to be called.
-#
-# A word about the context (the ':chpwd:profiles:*' stuff in the zstyle
-# command) which is used: The third part in the context is matched against
-# ${PWD}. That's why using a pattern such as /foo/bar(|/|/*) makes sense.
-# Because that way the profile is detected for all these values of ${PWD}:
-# /foo/bar
-# /foo/bar/
-# /foo/bar/baz
-# So, if you want to make double damn sure a profile works in /foo/bar and
-# everywhere deeper in that tree, just use (|/|/*) and be happy.
-#
-# The name of the detected profile will be available in a variable called
-# 'profile' in your functions. You don't need to do anything, it'll just be
-# there.
-#
-# Then there is the parameter $CHPWD_PROFILE is set to the profile, that was is
-# currently active (the default value is "default"). That way you can avoid
-# running code for a profile that is already active, by running code such as
-# the following at the start of your function:
-#
-# function chpwd_profile_grml() {
-# [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
-# ...
-# }
-#
-# If you know you are going to do that all the time for each and every
-# directory-profile function you are ever going to write, you may also set the
-# `re-execute' style to `false' (which only defaults to `true' for backwards
-# compatibility), like this:
-#
-# zstyle ':chpwd:profiles:*' re-execute false
-#
-# If you use this feature and need to know whether it is active in your current
-# shell, there are several ways to do that. Here are two simple ways:
-#
-# a) If knowing if the profiles feature is active when zsh starts is good
-# enough for you, you can use the following snippet:
-#
-# (( ${+functions[chpwd_profiles]} )) && print "directory profiles active"
-#
-# b) If that is not good enough, and you would prefer to be notified whenever a
-# profile changes, you can solve that by making sure you start *every*
-# profile function you create like this:
-#
-# function chpwd_profile_myprofilename() {
-# [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
-# print "chpwd(): Switching to profile: $profile"
-# ...
-# }
-#
-# That makes sure you only get notified if a profile is *changed*, not
-# everytime you change directory. (To avoid this, you may also set the newer
-# `re-execute' style like described further above instead of the test on top of
-# the function.
-#
-# If you need to do initialisations the first time `chpwd_profiles' is called
-# (which should be in your configuration file), you can do that in a function
-# called "chpwd_profiles_init". That function needs to be defined *before*
-# `chpwd_profiles' is called for this to work.
-#
-# During the *first* call of `chpwd_profiles' (and therefore all its profile
-# functions) the parameter `$CHPWD_PROFILES_INIT' exists and is set to `1'. In
-# all other cases, the parameter does not exist at all.
-#
-# When the system switches from one profile to another, it executes a function
-# named "chpwd_leave_profile_<PREVIOUS-PROFILE-NAME>()" before calling the
-# profile-function for the new profile.
-#
-# There you go. Now have fun with that.
-#
-# Note: This feature requires zsh 4.3.3 or newer.
+# For details see the `grmlzshrc.5' manual page.
function chpwd_profiles() {
local profile context
local -i reexecute