#!/bin/bash
# Filename: grml-network
# Purpose: configuration script for network
-# Authors: Klaus Knopper 2002, Niall Walsh + Stefan Lippers-Hollmann 2005, Michael Prokop <mika@grml.org>, Marcel Wichern <marcel@grml.org>
+# Authors: Michael Prokop <mika@grml.org>, Marcel Wichern 2006, Klaus Knopper 2002, Niall Walsh + Stefan Lippers-Hollmann 2004-2007
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Sam Jän 27 18:15:42 CET 2007 [mika]
+# Latest change: Sam Jän 27 19:28:54 CET 2007 [mika]
################################################################################
-# Changes have been merged from Kanotix's netcardconfig taken from
+# Changes have been merged from Kanotix's and Sidux's netcardconfig:
# http://kanotix.com/files/debian/pool/main/n/netcardconfig-kanotix/
+# http://svn.berlios.de/wsvn/fullstory/configure-networkcard/trunk/
################################################################################
PATH="/bin:/sbin:/usr/bin:/usr/sbin"
-export PATH
+LANGUAGE=C LANG=C
+export PATH LANGUAGE LANG
-# get root
-if [ $UID != 0 ]; then
- echo Error: become root before starting $0 >&2
- exit 100
-fi
+. /etc/grml/script-functions
+check4root
TMP=$(mktemp)
-WPATMP=$(mktemp)
bailout() {
rm -f "$TMP"
- rm -f "$WPATMP"
exit $1
}
IWOURLINE="$IWOURLINE wireless-essid $ESSID\n"
fi
- if [ $WPAON -gt 0 ]; then
- # Using wpa requires a wpa_supplicant entry
- IWPREUPLINE="${IWPREUPLINE}pre-up wpa_supplicant -D$WPA_DEV -i$WLDEVICE -c/etc/wpa_supplicant.conf -B\n"
- touch /etc/wpa_supplicant.conf
- awk '/^network={/{if(found){found=0}else{found=1;hold=$0}}/ssid={/{if(/ssid='"$ESSID"'/){found=1}else{found=0;print hold}}{if(!found){print}}' /etc/wpa_supplicant.conf >> "$TMP"
- wpa_passphrase "$ESSID" "$WPASECRET" 2>/dev/null >> "$TMP"
- mv -f /etc/wpa_supplicant.conf /etc/wpa_supplicant.conf.$(date +%Y%m%d_%H%M)
- if ! grep -q "For more information take a look at" /etc/wpa_supplicant.conf ; then
- cat >$WPATMP <<EOF
-# /etc/wpa_supplicant.conf
-# For more information take a look at /usr/share/doc/wpasupplicant/
-#
-# Other WPA options:
-# scan_ssid [0]|1
-# bssid 00:11:22:33:44:55
-# priority [0]|Integer
-# proto [WPA RSN] WPA|RSN
-# key_mgmt [WPA-PSK WPA-EAP]|NONE|WPA-PSK|WPA-EAP|IEEE8021X
-# pairwise [CCMP TKIP]|CCMP|TKIP|NONE
-# group [CCMP TKIP WEP105 WEP40]|CCMP|TKIP|WEP105|WEP40
-# eapol_flags [3]|1|2
-
-EOF
- fi
- [ -n "$APSCAN" ] && echo "$APSCAN" >> "$WPATMP"
- cat "$WPATMP" "$TMP" > /etc/wpa_supplicant.conf
- rm -f $WPATMP 2>/dev/null
- IWDOWNLINE="${IWDOWNLINE}down killall wpa_supplicant\n"
+ if [ "$WPAON" -gt 0 ]; then
+ IWOURLINE="$IWOURLINE wpa-ssid $ESSID\n wpa-psk $WPASECRET\n"
fi
- IWOURLINE="$IWOURLINE $IWPREUPLINE $IWDOWNLINE"
+ IWOURLINE="$IWOURLINE $IWPREUPLINE"
#echo "DEBUG: for interfaces $IWOURLINE"
}
read ESSID NWID MODE CHANNEL FREQ SENS RATE RTS FRAG IWCONFIG IWSPY IWPRIV KEY<"$TMP"
- if [ "$ESSID" = "~~~" ]; then ESSID=""; fi
- if [ "$NWID" = "~~~" ]; then NWID=""; fi
- if [ "$MODE" = "~~~" ]; then MODE=""; fi
- if [ "$CHANNEL" = "~~~" ]; then CHANNEL=""; fi
- if [ "$FREQ" = "~~~" ]; then FREQ=""; fi
- if [ "$SENS" = "~~~" ]; then SENS=""; fi
- if [ "$RATE" = "~~~" ]; then RATE=""; fi
- if [ "$RTS" = "~~~" ]; then RTS=""; fi
- if [ "$FRAG" = "~~~" ]; then FRAG=""; fi
- if [ "$IWCONFIG" = "~~~" ]; then IWCONFIG=""; fi
- if [ "$IWSPY" = "~~~" ]; then IWSPY=""; fi
- if [ "$IWPRIV" = "~~~" ]; then IWPRIV=""; fi
- if [ "$KEY" = "~~~" ]; then KEY=""; fi
+ [ "$ESSID" = "~~~" ] && ESSID=""
+ [ "$NWID" = "~~~" ] && NWID=""
+ [ "$MODE" = "~~~" ] && MODE=""
+ [ "$CHANNEL" = "~~~" ] && CHANNEL=""
+ [ "$FREQ" = "~~~" ] && FREQ=""
+ [ "$SENS" = "~~~" ] && SENS=""
+ [ "$RATE" = "~~~" ] && RATE=""
+ [ "$RTS" = "~~~" ] && RTS=""
+ [ "$FRAG" = "~~~" ] && FRAG=""
+ [ "$IWCONFIG" = "~~~" ] && IWCONFIG=""
+ [ "$IWSPY" = "~~~" ] && IWSPY=""
+ [ "$IWPRIV" = "~~~" ] && IWPRIV=""
+ [ "$KEY" = "~~~" ] && KEY=""
ESSID=$(echo $ESSID | tr "~" " " | sed 's/ *$//')
hostap)
WPA_DEV="hostap"
;;
+ *)
+ WPA_DEV="wext"
+ ;;
esac
if [ -z "$WPA_DEV" ]; then
WPAON=-1
if [ -n "$WPA_DEV" ]; then
- if $DIALOG --yesno "$MESSAGEW22" 15 50; then
- # Other wpa options
- # scan_ssid [0]|1
- # bssid 00:11:22:33:44:55
- # priority [0]|Integer
- # proto [WPA RSN] WPA|RSN
- # key_mgmt [WPA-PSK WPA-EAP]|NONE|WPA-PSK|WPA-EAP|IEEE8021X
- # pairwise [CCMP TKIP]|CCMP|TKIP|NONE
- # group [CCMP TKIP WEP105 WEP40]|CCMP|TKIP|WEP105|WEP40
- # eapol_flags [3]|1|2
-
- if ! $DIALOG --yesno "Is SSID broadcast enabled?" 15 50; then
- APSCAN="ap_scan=2"
- fi
- WPAON=1
- KEY=""
- WPASECRET=$(awk '/network/{if(found){found=0}else{found=1}}/ssid/{if(/ssid="'"$ESSID"'"/){found=1}else{found=0}}/#scan_ssid=1/#psk=/{if(found){gsub(/^\W*#psk="/,"");gsub(/"\W*$/,"");print}}' /etc/wpa_supplicant.conf)
-
- $DIALOG --inputbox "$MESSAGEW23 $ESSID" 15 50 "$WPASECRET" 2>"$TMP" || bailout 1
- WPASECRET=$(sed -e 's/\\/\\/g' "$TMP") && rm -r "$TMP"
-
- case $WPA_DEV in
- hostap)
- MODE="Managed"
- ;;
- esac
- else
- WPASECRET=""
- fi
+ if $DIALOG --yesno "$MESSAGEW22" 15 50; then
+ # Other wpa options
+ # scan_ssid [0]|1
+ # bssid 00:11:22:33:44:55
+ # priority [0]|Integer
+ # proto [WPA RSN] WPA|RSN
+ # key_mgmt [WPA-PSK WPA-EAP]|NONE|WPA-PSK|WPA-EAP|IEEE8021X
+ # pairwise [CCMP TKIP]|CCMP|TKIP|NONE
+ # group [CCMP TKIP WEP105 WEP40]|CCMP|TKIP|WEP105|WEP40
+ # eapol_flags [3]|1|2
+
+ WPAON=1
+ KEY=""
+ WPASECRET=$(awk '
+ /iface/{
+ if(found){
+ found=0
+ }
+ else if (/'"$DV"'/){
+ found=1
+ }
+ }
+ /wpa-psk/{
+ if(found){
+ gsub(/\W*#.*$/,"");
+ if (gsub(/^\W*wpa-psk\W*/,"")){
+ gsub(/\W.*$/,"");
+ print;
+ exit;
+ }
+ }
+ }
+ ' /etc/network/interfaces)
+ $DIALOG --inputbox "$MESSAGEW23 $ESSID" 15 50 "$WPASECRET" 2>"$TMP" || bailout 1
+
+ # make sure backslashes inside passphrase are handled correct
+ WPASECRET=$(sed -e 's/\\/\\/g' "$TMP") && rm -r "$TMP"
+
+ case $WPA_DEV in
+ hostap)
+ MODE="Managed"
+ ;;
+ esac
+ else
+ WPASECRET=""
+ fi
else
- WPASECRET=""
+ WPASECRET=""
fi
# No need for a wep key if we are using wpa
if [ ! $WPAON -eq 1 ]; then
- $DIALOG --inputbox "$MESSAGEW14 $DEVICENAME $MESSAGEW15" 15 50 "$KEY" 2>"$TMP" || bailout 1
- read KEY <"$TMP" ; rm -f "$TMP"
-
- if [ -n "$KEY" -a "$PUBKEY" -eq 0 ]; then
- if ! $DIALOG --yesno "$MESSAGEW25 $DEVICENAME $MESSAGEW26" 15 50; then
- PUBKEY=1
- fi
- fi
+ $DIALOG --inputbox "$MESSAGEW14 $DEVICENAME $MESSAGEW15" 15 50 "$KEY" 2>"$TMP" || bailout 1
+ read KEY <"$TMP" ; rm -f "$TMP"
+
+ if [ -n "$KEY" -a "$PUBKEY" -eq 0 ]; then
+ if ! $DIALOG --yesno "$MESSAGEW25 $DEVICENAME $MESSAGEW26" 15 50; then
+ PUBKEY=1
+ fi
+ fi
fi
$DIALOG --inputbox "$MESSAGEW16 $DEVICENAME $MESSAGEW17" 15 50 "$IWCONFIG" 2>"$TMP" || bailout 1
#addauto
fi
-# we are using resolvconf, so don't write to /etc/resolv.conf
-# if [ -n "$NS" ]; then
-# more=""
-#
-# for i in $NS; do
-# if [ -z "$more" ]; then
-# more=yes
-# echo "$MESSAGE11 $i"
-# echo "nameserver $i" >/etc/resolv.conf
-# else
-# echo "$MESSAGE12 $i"
-# echo "nameserver $i" >>/etc/resolv.conf
-# fi
-# done
-# fi
fi
echo "Done."
}
DIALOG="dialog"
-# export XDIALOG_HIGH_DIALOG_COMPAT=1
-# [ -n "$DISPLAY" ] && [ -x /usr/bin/Xdialog ] && DIALOG="Xdialog"
-
-# LANGUAGE etc.
-[ -r /etc/default/locale ] && . /etc/default/locale
-# Default all strings to English
NET_DEVICE_NAME="Network_device"
NET_DEVICE_NAME_W="Wireless_device"
NET_DEVICE_NAME_FW="Firewire_device"
MESSAGE3="Sending DHCP broadcast from device"
MESSAGE4="Failed."
MESSAGE5="Hit return to exit."
-MESSAGE6="Please enter IP Address for "
-MESSAGE7="Please enter Network Mask for "
-MESSAGE8="Please enter Broadcast Address for "
+MESSAGE6="Please enter IP Address for"
+MESSAGE7="Please enter Network Mask for"
+MESSAGE8="Please enter Broadcast Address for"
MESSAGE9="Please enter Default Gateway"
MESSAGE10="Please enter Nameserver(s)"
MESSAGE11="Setting Nameserver in /etc/resolv.conf to"
MESSAGEW23="Enter the WPA passphrase (passphrase must be 8..63 characters) for"
MESSAGEW25="Would you like to store your wep key in it's own private file ("
MESSAGEW26=")? If you say no, your wep key will be stored in /etc/network/interfaces and will be readable by any account on your system. You may want to 'chmod 600 /etc/network/interfaces' if you answer no to this question"
-MESSAGEW27="Is SSID broadcast enabled?"
-
-case "$LANGUAGE" in
- de|at|ch)
- NET_DEVICE_NAME="Netzwerkkarte"
- MESSAGE0="Keine unterstützten Netzwerkkarte(n) gefunden."
- MESSAGE1="Bitte Netzwerkkarte auswählen"
- MESSAGE2="DHCP Broadcast zur Konfiguration benutzen? (Nein=manuell)"
- MESSAGE3="Sende DHCP Broadcast von Netzwerkkarte"
- MESSAGE4="Fehlgeschlagen."
- MESSAGE5="Eingabetaste zum Beenden."
- MESSAGE6="Bitte geben Sie die IP-Adresse ein für "
- MESSAGE7="Bitte geben Sie die Netzwerk-Maske ein für "
- MESSAGE8="Bitte geben Sie die Broadcast-Adresse ein für "
- MESSAGE9="Bitte geben Sie das Default-Gateway ein"
- MESSAGE10="Bitte geben Sie den/die Nameserver ein"
- MESSAGE11="Setze Nameserver in /etc/resolv.conf auf "
- MESSAGE12="Füge Nameserver in /etc/resolv.conf hinzu:"
- MESSAGE13="WLAN-Einstellungen konfigurieren?"
- MESSAGE14="Fehler beim Aktivieren des Interface, wollen Sie es neu konfigurieren?"
- MESSAGE15="Interface aktiviert, beim Systemstart automatisch aktivieren?"
- MESSAGEW0="Keine Wireless-Netzwerkkarte gefunden."
- MESSAGEW1="Konfiguration der Wireless-Parameter von"
- MESSAGEW2="Bitte Wireless-Netzwerkkarte auswählen"
- MESSAGEW3="Bitte konfigurieren Sie vorher die IP-Parameter der Karte !"
- MESSAGEW4="Geben Sie die ESSID für"
- MESSAGEW5="ein\n\n\n(leer für 'any', nicht zu empfehlen !!)\n"
- MESSAGEW6="Geben Sie ggf. die NWID (Cell Identifier)\nfür"
- MESSAGEW7="ein, falls es eine gibt\n\n\n"
- MESSAGEW8="Geben Sie den Modus für"
- MESSAGEW9="ein\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
- MESSAGEW10="Geben Sie den Kanal für"
- MESSAGEW11="ein\n\n(0 bis 16, leer für auto oder Frequenz-\neingabe im nächsten Fenster)\n"
- MESSAGEW12="Geben Sie die Frequenz für"
- MESSAGEW13="ein\n\n(z.B. 2.412G, leer für auto)"
- MESSAGEW14="Geben Sie den Verschlüsselungs-Key\nfür"
- MESSAGEW15="ein\n\n(leer für Klartext, nicht zu empfehlen !!)"
- MESSAGEW16="Geben Sie ggf. zusätzliche Parameter für\n'iwconfig"
- MESSAGEW17="' ein, z.B.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
- MESSAGEW18="Geben Sie ggf. zusätzliche Parameter für\n'iwspy"
- MESSAGEW19="' ein\n\n\n"
- MESSAGEW20="Geben Sie ggf. zusätzliche Parameter für\n'iwpriv"
- MESSAGEW21="' ein\n\n\n"
- MESSAGEW22="WPA-Unterstützung aktivieren?"
- MESSAGEW23="WPA-Passwort eingeben für"
- MESSAGEW25="WEP-Schlüssel in privater Datei abspeichern ("
- MESSAGEW26="? Wenn Sie hier Nein sagen, wird der WEP-Schlüssel in /etc/network/interfaces abgespeichert und kann von allen Accounts auf dem System gelesen werden. Wenn Sie mit Nein antworten, sollten Sie vielleicht 'chmod 600 /etc/network/interfaces' ausführen."
- MESSAGEW27="Ist SSID Broadcast aktiviert?"
- ;;
- es)
- NET_DEVICE_NAME="Dispositivo_de_la_red"
- MESSAGE0="Se han encontrado tarjetas de red no soportadas."
- MESSAGE1="Por favor, seleccione el dispositivo fisico de red"
- MESSAGE2="¿Utilizar broadcast DHCP?"
- MESSAGE3="Enviando broadcast DHCP desde el dispositivo"
- MESSAGE4="Fallado."
- MESSAGE5="Pulse enter para salir."
- MESSAGE6="Por favor, inserte la dirección IP para "
- MESSAGE7="Por favor, inserte la máscara de red para "
- MESSAGE8="Por favor, inserte la dirección de Broadcast para "
- MESSAGE9="Por favor, inserte la puerta de enlace por defecto"
- MESSAGE10="Por favor, inserte los servidores DNS"
- MESSAGE11="Poniendo los servidores de nombres de /etc/resolv.conf a "
- MESSAGE12="Adicionando servidor DNS a /etc/resolv.conf:"
- MESSAGEW0="No se ha encontrado una tarjeta inalámbrica."
- MESSAGEW1="Configuración de los parámetros inalámbricos para"
- MESSAGEW2="Por favor, seleccione un dispositivo de red inalámbrico"
- MESSAGEW3="Por favor, configure primero los parámetros de la IP para la interfaz"
- MESSAGEW4="Teclee el ESSID para"
- MESSAGEW5="\n\n\n(vacío para 'cualquiera', ¡no recomendado!)\n"
- MESSAGEW6="Teclee el NWID (identificador de celda)\npara"
- MESSAGEW7=", si es necesario\n\n\n"
- MESSAGEW8="Teclee el modo para"
- MESSAGEW9="\n\n(Managed(=por_defecto), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
- MESSAGEW10="Teclee el número del canal para"
- MESSAGEW11="\n\n(0 bis 16, vacío para auto o si lo prefiere\n teclee la frecuencia seguidamente)\n"
- MESSAGEW12="Teclee la frecuencia para"
- MESSAGEW13="\n\n(ej. 2.412G, vacío para auto)"
- MESSAGEW14="Teclee la clave de encriptación\npara"
- MESSAGEW15="\n\n(vacío para texto plano, ¡¡no recomendado!!)"
- MESSAGEW16="Teclee los parámetros adicionales para\n'iwconfig"
- MESSAGEW17="' Si es necesario, ej.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
- MESSAGEW18="Teclee los parámetros adicionales para\n'iwspy"
- MESSAGEW19="' si es necesario\n\n\n"
- MESSAGEW20="Teclee los parámetros adicionales para\n'iwpriv"
- MESSAGEW21="' si es necesario\n\n\n"
- ;;
- it)
- NET_DEVICE_NAME="Periferica_di_rete"
- NET_DEVICE_NAME_W="Periferica_Wireless"
- NET_DEVICE_NAME_FW="Periferica_Firewire"
- NET_DEVICE_NAME_AUTO="Automatico"
- MESSAGE0="Non ho trovato schede di rete supportate."
- MESSAGE1="Per favore seleziona la periferica di rete"
- MESSAGE2="Devo utilizzare il broadcast DHCP?"
- MESSAGE3="Sto inviando il broadcast DHCP dalla periferica"
- MESSAGE4="Fallito."
- MESSAGE5="Premi invio per uscire."
- MESSAGE6="Inserisci l'indirizzo IP per "
- MESSAGE7="Inserisci la maschera di rete per "
- MESSAGE8="Inserisci l'indirizzo di broadcast per "
- MESSAGE9="Inserisci il Gateway di default"
- MESSAGE10="Inserisci i Nameserver"
- MESSAGE11="Sto settando i Nameserver in /etc/resolv.conf a"
- MESSAGE12="Aggiungo i Nameserver in /etc/resolv.conf:"
- MESSAGE13="Configuro le opzioni del wireless?"
- MESSAGE14="Non riesco ad attivare l'interfaccia, vuoi riconfigurarla?"
- MESSAGE15="Interfaccia attiva, vuoi abilitarla automaticamente all'avvio?"
- MESSAGEW0="Nessuna scheda di rete wireless trovata."
- MESSAGEW1="Configurazione dei parametri wireless per"
- MESSAGEW3="Configura i parametri IP dell'interfaccia per prima cosa!"
- MESSAGEW4="Inserisci l'ESSID per"
- MESSAGEW5="\n\n\n(vuoto per 'tutti', non raccomandato!)\n"
- MESSAGEW6="Inserisci il NWID (cell identifier)\nper"
- MESSAGEW7=", se necessario\n\n\n"
- MESSAGEW8="Inserisci la modalità per"
- MESSAGEW9="\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
- MESSAGEW10="Inserisci il numero di canale per"
- MESSAGEW11="\n\n(da 0 a 16, vuoto per automatico o se vuoi\n inserire la frequnza dopo)\n"
- MESSAGEW12="Inserisci la frequenza per"
- MESSAGEW13="\n\n(es. 2.412G, vuoto per automatico)"
- MESSAGEW14="Inserisci la chiave crittografica\nper"
- MESSAGEW15="\n\n(vuoto per trasmissione in chiaro, non raccomandato!)"
- MESSAGEW16="Inserisci i parametri aggiuntivi per\n'iwconfig"
- MESSAGEW17="' se necessario, es.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
- MESSAGEW18="Inserisci parametri aggiuntivi per\n'iwspy"
- MESSAGEW19="' se necessario\n\n\n"
- MESSAGEW20="Inserisci parametri aggiuntivi per\n'iwpriv"
- MESSAGEW21="' se necessario\n\n\n"
- MESSAGEW22="Abilito il supporto WPA?"
- MESSAGEW23="Inserisci la Passphrase di WPA\nper"
- MESSAGEW25="Vuoi memorizzare la tua chiave WEP nel suo file riservato ("
- MESSAGEW26=")? Se dici no, la tua chiave WEP sarà memorizzata nel file /etc/network/interfaces e sarà leggibile da tutti gli account del tuo sistema. Dovresti fare 'chmod 600 /etc/network/interfaces' se rispondi no a questa domanda"
- MESSAGEW27="Is SSID broadcast enabled?"
- ;;
-fr)
- NET_DEVICE_NAME="Carte_réseau"
- MESSAGE0="Aucune carte réseau supportée trouvée."
- MESSAGE1="Sélectionnez la carte réseau, svp"
- MESSAGE2="Voulez-vous utiliser DHCP?"
- MESSAGE3="Envoi de broadcast DHCP par la carte"
- MESSAGE4="Echec."
- MESSAGE5="Appuyez sur Entrée pour quitter."
- MESSAGE6="Entrez une adresse IP pour "
- MESSAGE7="Entrez le Masque de Sous-réseau pour "
- MESSAGE8="Entrez l'adresse Broadcast pour "
- MESSAGE9="Entrez l'IP de la Passerelle par Défaut"
- MESSAGE10="Entrez Les DNS de votre FAI"
- MESSAGE11="Réglage des DNS dans /etc/resolv.conf"
- MESSAGE12="Ajoût des DNS dans /etc/resolv.conf:"
- MESSAGEW0="Aucune carte Wifi trouvée."
- MESSAGEW1="Configuration des paramètres de réseau sans fil pour "
- MESSAGEW3="SVP, Commencez par configurer les paramètres d'IP de l'interface!"
- MESSAGEW4="Entrez l'ESSID pour"
- MESSAGEW5="\n\n\n(ne rien mettre pour 'peu importe' n'est pas recommandé !)\n"
- MESSAGEW6="Entrez le NWID (cell identifier)\npour"
- MESSAGEW7=", si nécessaire\n\n\n"
- MESSAGEW8="Entrez le mode pour "
- MESSAGEW9="\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
- MESSAGEW10="Entrez numéro de canal pour"
- MESSAGEW11="\n\n(0 à 16, vide pour auto ou si vous voulez\n entrer la fréquence ensuite)\n"
- MESSAGEW12="Entrez la fréquence pour"
- MESSAGEW13="\n\n(ex: 2.412G, vide pour auto)"
- MESSAGEW14="Entrez la clé de cryptage\npour"
- MESSAGEW15="\n\n(vide pour texte en clair, non recommandé !!)"
- MESSAGEW16="Entrez des paramètres additionnels pour\n'iwconfig"
- MESSAGEW17="' si nécessaire, comme \n\n\nsens -80 rts 512 frag 512 rate 5.5M"
- MESSAGEW18="Entrer des paramètres additionnels pour\n'iwspy"
- MESSAGEW19="' si nécessaire\n\n\n"
- MESSAGEW20="Entrer des paramètres additionnels pour\n'iwpriv"
- MESSAGEW21="' si nécessaire\n\n\n"
- MESSAGEW22="Activer la protection WPA?"
- MESSAGEW23="Entrez le mot-de-passe WPA pour"
- MESSAGEW25="Clé WEP sauvée dans un fichier privé ("
- MESSAGEW26="? Si vous répondez non ici, la clé WEP sera stockée dans /etc/network/interfaces et pourra être accessible à tous les utilisateurs de la machine. Peut-être serait-il alors judicieux de fixer ainsi les droits de 'interfaces': 'chmod 600 /etc/network/interfaces'"
- MESSAGEW27="Is SSID broadcast enabled?"
- ;;
-esac
+
NETDEVICESCOUNT=0
LAN=$(tail -n +3 /proc/net/dev|awk -F: '{print $1}'|sed "s/\s*//"|grep -v -e ^lo -e ^vmnet|sort)
projects / grml-network.git / commitdiff