--- /dev/null
+install_ = "install"
+
+name = "grml-terminalserver"
+
+etc = ${DESTDIR}/etc/grml/terminalserver
+usr = ${DESTDIR}/usr
+usrbin = $(usr)/bin
+usrsbin = $(usr)/sbin
+usrshare = $(usr)/share/$(name)
+
+
+install:
+ $(install_) -d -m 755 $(etc)
+ $(install_) -m 644 config $(etc)
+
+ $(install_) -d -m 755 $(usrshare)
+ $(install_) -m 644 grub_cards $(usrshare)
+ $(install_) -m 644 default_config $(usrshare)
+ $(install_) -m 644 shared_prog_vars $(usrshare)
+ $(install_) -m 755 nfs-kernel-server $(usrshare)
+ $(install_) -m 755 linuxrc $(usrshare)
+ $(install_) -m 755 udhcp-config.sh $(usrshare)
+ $(install_) -m 755 udhcpc $(usrshare)
+ $(install_) -m 755 modcalc $(usrshare)
+ $(install_) -m 755 rdir $(usrshare)
+ $(install_) -m 755 cdir $(usrshare)
+ $(install_) -m 755 discover-nic $(usrshare)
+ cp -r templates $(usrshare)
+
+ $(install_) -m 755 -d $(usrsbin)
+ $(install_) -m 755 grml-terminalserver $(usrsbin)
+ $(install_) -m 755 grml-terminalserver-config $(usrsbin)
+
+clean:
+ true
--- /dev/null
+#!/static/ash
+# creates the custom dir layout to load modules and execute discover
+
+if [ -e /mylib -o -e /myusr ]; then
+ mv /lib /lib~
+ mv /usr /usr~
+ mv /mylib /lib
+ mv /myusr /usr
+fi
+
--- /dev/null
+# attention you have to really know what you are doing
+# this options are for debugging purpuose only (to test
+# grml-terminalserver on plain debian sid) or to run the
+# grml-terminalserver on a grml hd install.
+#
+# this is a shellscript fragment and will be sourced from both
+# grml-terminalserver AND grml-terminalserver-config
+
+
+# should be used if paths within the modules.dep do not refere to
+# the current root (if you want to use a module dir of an other
+# linux)
+# if you want to use /mnt/other-linux/lib/modules then:
+# MODULES_PATH_=/mnt/other-linux/lib/modules
+# MODULES_PATH_ROOT_DIFF_=/mnt/other-linux
+# default: <none>
+#MODULES_PATH_ROOT_DIFF_=""
+
+# path to the kernel modules you would want to use to create
+# the initrd (basedir eg. like /lib/modules)
+# default: /lib/modules
+#MODULES_PATH_=""
+
+# `uname -r` would give it to you, or THIS config file
+# default: `uname -r`
+#KERNEL_VERSION_=""
+
+# this is the path where the grml image/cdrom is placed (mounted)
+# default: /cdrom
+#MOUNT_POINT_=""
+
+# path + name of the linux kernel you would want to boot
+# default: /cdrom/boot/isolinux/linux26
+#KERNEL_IMAGE_=""
+
+# this is the initrd the grml-terminalserver-config edits
+# if the file is not found, default will be used
+# default: /cdrom/boot/isolinux/minirt26.gz
+#ORIGINAL_INITRD_=""
+
+# path + name of the memtest image
+# default: /cdrom/boot/isolinux/memtest
+#MEMTEST_IMAGE_=""
+
+# path to pxelinux boot message
+# default: /cdrom/boot/isolinux/boot.msg
+#PXE_BOOT_MSG_=""
+
+# path to pxelinux boot logo
+# default: /cdrom/boot/isolinux/logo.16
+#PXE_BOOT_LOGO_=""
--- /dev/null
+The Debian Package grml-terminalserver
+----------------------------
+
+Comments regarding the Package
+
+Michael Gebetsroither <gebi@grml.org>, Sun, 20 Mar 2005 19:39:26 +0100
--- /dev/null
+grml-terminalserver for Debian
+------------------------------
+
+This version of grml-terminalserver is tested and developed on debian sid (it works now ;).
+Please adjust the config in /etc/grml/terminalserver/config
+
+Example setup on debian:
+1. mount your grml cd or the iso image to /cdrom
+2. mount /cdrom/GRML/GRML to /mnt/tmp
+3. adjust the following variables:
+MODULES_PATH_ROOT_DIFF_="/mnt/tmp"
+MODULES_PATH_="/mnt/tmp/lib/modules"
+4. set the kernel version to the kernel you would want to use
+ choose one from: ls -l /lib/modules |awk '/-grml/{print $8}'
+eg. KERNEL_VERSION_="2.6.12-grml"
+
+
+ -- Michael Gebetsroither <gebi@grml.org>, Sun, 20 Mar 2005 19:39:26 +0100
--- /dev/null
+ * fix problem with nvidia NICs (forcedeath)
+ * maybe dump discover + libuclibc in favour of hwinfo + libc (space?)
+ * udhcp client "timeout" ( --background + in linuxrc 10s warten bis IP kommt, wenn schon ip vorhanden sofort weitermachen).
+ * resolv.conf should be copied from the initrd
+ * update linuxrc from grml
+ * DON'T delete /var/lib/tftpdboot on a !grml-system
+ * config vars to use external services (dhcp, tftp, nfs)
+ * make pxelinux configurable (to use another pxe-boot-manager) (MAYBE)
+ * ...
--- /dev/null
+grml-terminalserver (0.66) unstable; urgency=low
+
+ * fixed partition defaults in option dialog from grml2hd
+ * few minor typo fixes in the dialogs
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sat, 22 Oct 2005 03:07:39 +0200
+
+grml-terminalserver (0.65) unstable; urgency=low
+
+ * fixed variable definition (added local to most variables)
+ * fixed loopdevice handling with mount -o loop
+ * fixed modcalc and grml-terminalserver-config module code
+ * fixed fix of modcal dependencie calculating code
+ * fixed modules path problems
+ * fixed a few small bugs
+ * fixed a small "bug" if there is no grml-image (clean up correctly)
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Mon, 17 Oct 2005 12:54:43 +0200
+
+grml-terminalserver (0.64) unstable; urgency=low
+
+ * cleaned up boot profiles (grub/pxelinux)
+ * unified variables between grml-terminalserver and
+ grml-terminalserver-config (one single file for constants)
+ * cleand up tftpd start prozess
+ * added $DHCPD_CONFIG_FILE in grml-terminalserver
+ * removed hardcoded path /cdrom
+ * variable cleanup
+ * added template engine, templates are in /usr/share/.../templates/
+ * fixed netmask handling
+ * kicked netmask in favour of ipcalc for network range calculation
+ * fixed typo in checks against false configuration
+ * fixed mount problems (permission denied)
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sun, 14 Aug 2005 21:58:10 +0200
+
+grml-terminalserver (0.63) unstable; urgency=low
+
+ * simplified configuration handling (default vars) UPDATE YOUR CONFIG
+ * added gcc-3.3 to the dependencies (grub won't compile with gcc-4.0)
+ * added checks against false configuration
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Thu, 4 Aug 2005 22:37:04 +0200
+
+grml-terminalserver (0.62) unstable; urgency=low
+
+ * moved discover to -data package
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Thu, 4 Aug 2005 20:06:04 +0200
+
+grml-terminalserver (0.61) unstable; urgency=low
+
+ * splitted up package in grml-terminalserver and grml-terminalserver-data
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sun, 31 Jul 2005 00:32:05 +0200
+
+grml-terminalserver (0.60) unstable; urgency=low
+
+ * fixed reboot/halt problems
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Mon, 9 May 2005 18:04:01 +0200
+
+grml-terminalserver (0.59) unstable; urgency=low
+
+ * fixed a few small manpage issues
+ * rewrote complete commandline argument processing
+ * manpage update
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sun, 8 May 2005 22:19:44 +0200
+
+grml-terminalserver (0.58) unstable; urgency=low
+
+ * fixed a few typos
+ * make it release ready ;)
+ * added grml-terminalserver-config clean, to remove all created config files
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sun, 8 May 2005 21:09:49 +0200
+
+grml-terminalserver (0.57) unstable; urgency=low
+
+ * added discover-nic command to the initrd
+ * added alias debuginit to the bootmenu
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Tue, 3 May 2005 13:18:01 +0200
+
+grml-terminalserver (0.56) unstable; urgency=low
+
+ * fixed NON-PXE booting with grub (right boot params)
+ * added memtest to bootoptions
+ * updatet linuxrc with upstream
+ * fixed default ramdisk size
+ * fixed problem with hosts.allow/hosts.deny
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sun, 1 May 2005 19:33:43 +0200
+
+grml-terminalserver (0.55) unstable; urgency=low
+
+ * first "working" version, it boots up => it's perfect :D (linus)
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Wed, 27 Apr 2005 00:59:32 +0200
+
+grml-terminalserver (0.54) unstable; urgency=low
+
+ * new test release
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Mon, 25 Apr 2005 12:30:13 +0200
+
+grml-terminalserver (0.53) unstable; urgency=low
+
+ * fixed unnecessary file backup
+ * DEBUG UPDATE
+ * tried another initrd/linuxrc combination
+ * added config file, to run it on plain debian sid also
+ * added executables cdir/rdir into the initrd
+ * cdir to create a dir layout to run discover and modprobe
+ * rdir to put the old files in place
+
+ -- Michael Gebetsroither <michael.geb@gmx.at> Sun, 24 Apr 2005 16:14:40 +0200
+
+grml-terminalserver (0.52) unstable; urgency=low
+
+ * added libuclibc0 to the dependencies
+ * added discover-data to the dependencies
+ * integrate functions to build a "generic" netboot initrd, now it should be
+ a _real_ terminalserver ;)
+ * big changes in grml-terminalserver-config + linuxrc
+
+ -- Michael Gebetsroither <gebi@grml.org> Tue, 12 Apr 2005 13:56:32 +0200
+
+grml-terminalserver (0.51) unstable; urgency=low
+
+ * added sh-lib to the dependencies
+ * added syslinux to the dependencies
+ * reworked grml-terminalserver-config get options section (not zsh
+ compatibel)
+ * made paths grml compatibel
+
+ -- Michael Gebetsroither <gebi@grml.org> Sat, 9 Apr 2005 19:55:08 +0200
+
+grml-terminalserver (0.5) unstable; urgency=low
+
+ * added manpages
+ * fixed a bug in grml-terminalserver-config (getting the options)
+
+ -- Michael Gebetsroither <gebi@grml.org> Sun, 3 Apr 2005 12:41:15 +0200
+
+grml-terminalserver (0.4) unstable; urgency=low
+
+ * fixed a few lintian warnings (changed section to net, removed /usr/bin)
+
+ -- Michael Gebetsroither <gebi@grml.org> Sat, 2 Apr 2005 22:35:34 +0200
+
+grml-terminalserver (0.3) unstable; urgency=low
+
+ * fixed #246904 from nfs-kernel-server (own init skript)
+ * replaced a few parameters with global variables
+
+ -- Michael Gebetsroither <gebi@grml.org> Sat, 2 Apr 2005 20:46:49 +0200
+
+grml-terminalserver (0.2) unstable; urgency=low
+
+ * fixed a few path's in the skript (get it working)
+
+ -- Michael Gebetsroither <gebi@grml.org> Thu, 31 Mar 2005 15:24:18 +0200
+
+grml-terminalserver (0.1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- Michael Gebetsroither <gebi@grml.org> Sun, 20 Mar 2005 19:39:26 +0100
+
+Local variables:
+mode: debian-changelog
+End:
--- /dev/null
+Source: grml-terminalserver
+Section: net
+Priority: optional
+Maintainer: Michael Gebetsroither <gebi@grml.org>
+Build-Depends: debhelper (>= 4.0.0)
+Standards-Version: 3.6.2
+
+Package: grml-terminalserver
+Architecture: all
+Depends: sh-lib (>=1.02.03), grml-terminalserver-data (>=0.62), dialog, dhcp3-server, tftpd-hpa, syslinux, libuclibc0, discover-data, gcc-3.3, ipcalc
+Description: terminalserver for grml
+ This software should netboot grml on other computers over the
+ network. Also this terminalserver should work with NON-PXE
+ cards (compiles grub during configuration and makes a
+ boot-disk).
--- /dev/null
+This is grml-terminalserver, written and maintained by Michael Gebetsroither <gebi@grml.org>
+on Sun, 20 Mar 2005 19:39:26 +0100.
+
+The original source can always be found at:
+ ftp://ftp.debian.org/dists/unstable/main/source/
+
+Copyright (C) 2003 Michael Gebetsroither
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this package; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
--- /dev/null
+.\" Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH GRML-TERMINALSERVER-CONFIG 8 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh disable hyphenation
+.\" .hy enable hyphenation
+.\" .ad l left justify
+.\" .ad b justify to both left and right margins
+.\" .nf disable filling
+.\" .fi enable filling
+.\" .br insert line break
+.\" .sp <n> insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+grml-terminalserver-config \- Config program for terminalserver coming with GRML
+.SH SYNOPSIS
+.B grml-terminalserver-config
+.RI [ options ] " <command>
+.br
+.SH DESCRIPTION
+This manual page documents briefly the
+.B grml-terminalserver-config
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
+.\" respectively.
+\fBgrml-terminalserver-config\fP is a program that
+provides the configuration script for the terminalserver coming with GRML.
+.SH OPTIONS
+These programs follow the long option style without dashes and
+short options starting with one dash (`-').
+A summary of options is included below.
+.TP
+.B <default>
+Interactive configuration of the terminalserver (same as option interactive).
+.TP
+.B interactive
+Interactive configuring the terminalserver
+.TP
+.B grubConf
+Configure grub and make boot-image (for non-PXE NICs)
+.TP
+.B grubConfWrite
+Configure grub & write image to floppy disk
+.TP
+.B grubWrite
+Write compiled grub-image to floppy disk
+.TP
+.B grubMultiWrite
+batchwrite grub-image to floppy disk (exiting with strg+c)
+.TP
+.B clean
+Remove all configfiles created during user configuration
+.TP
+.B \-h, help
+Show summary of options.
+.TP
+.B \-v
+Show what is going on (more v => more output).
+.SH SEE ALSO
+.BR grml-terminalserver (8)
+.SH AUTHOR
+grml-terminalserver-config was written by Michael Gebetsroither <gebi@grml.org>.
+.PP
+This manual page was written by Michael Gebetsroither <gebi@grml.org>.
--- /dev/null
+.\" Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH GRML-TERMINALSERVER 8 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh disable hyphenation
+.\" .hy enable hyphenation
+.\" .ad l left justify
+.\" .ad b justify to both left and right margins
+.\" .nf disable filling
+.\" .fi enable filling
+.\" .br insert line break
+.\" .sp <n> insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+grml-terminalserver \- Complete Terminalserver software for GRML
+.SH SYNOPSIS
+.B grml-terminalserver
+.RI [ options ] " <command>
+.br
+.SH DESCRIPTION
+This manual page documents briefly the
+.B grml-terminalserver
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
+.\" respectively.
+\fBgrml-terminalserver\fP is a program that
+provides booting grml on other computers via network.
+The terminalserver should work also with NON-PXE card via compiling grub during configuration and creating an appropriate bootdisk.
+.SH OPTIONS
+These programs follow the long option style without dashes and
+short options starting with one dash (`-').
+A summary of options is included below.
+.TP
+.B <default>
+For the first start (no config in /etc/grml/terminalserver), grml-terminalserver-config will be executed.
+Then start the terminalserver (same as option start).
+.TP
+.B start <service>
+Start services
+.TP
+.B stop <service>
+Stop services
+.B clean
+Stop all + remove config and boot files from services
+.TP
+.B \-h, help
+Show summary of options.
+.TP
+.B \-v
+Show what is going on (more v => more output).
+.SH SERVICES
+.TP
+.B tftp
+Tftp daemon
+.TP
+.B dhcp
+Dhcp daemon
+.TP
+.B nfs
+All necessary nfs daemons
+.TP
+.B <>
+ALL services
+.SH SEE ALSO
+.BR grml-terminalserver-config (8)
+.SH AUTHOR
+grml-terminalserver was written by Michael Gebetsroither <gebi@grml.org>.
+.PP
+This manual page was written by Michael Gebetsroither <gebi@grml.org>.
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+
+
+
+CFLAGS = -Wall -g
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ # Add here commands to configure the package.
+
+ touch configure-stamp
+
+
+build: build-stamp
+
+build-stamp: configure-stamp
+ dh_testdir
+
+ # Add here commands to compile the package.
+ # $(MAKE)
+ #docbook-to-man debian/grml-terminalserver.sgml > grml-terminalserver.1
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+
+ # Add here commands to clean up after the build process.
+ $(MAKE) clean
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ # Add here commands to install the package into debian/grml-terminalserver.
+ $(MAKE) install DESTDIR=$(CURDIR)/debian/grml-terminalserver
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+# dh_install
+# dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+# dh_installinit
+# dh_installcron
+# dh_installinfo
+ dh_installman debian/grml-terminalserver.8 debian/grml-terminalserver-config.8
+ dh_link
+# dh_strip
+ dh_compress
+ dh_fixperms
+# dh_perl
+# dh_python
+# dh_makeshlibs
+ dh_installdeb
+# dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- /dev/null
+# this are the program default vars for the user configurable variables
+# !!! DO NOT EDIT THIS FILE !!!
+# /etc/grml/terminalserver/config is what you are searching for
+
+MODULES_PATH_ROOT_DIFF_=""
+
+MODULES_PATH_="/lib/modules"
+
+KERNEL_VERSION_=`uname -r`
+
+MOUNT_POINT_="/cdrom"
+
+DATA_PATH_="$MOUNT_POINT_/boot/isolinux"
+
+KERNEL_IMAGE_="$DATA_PATH_/linux26"
+
+ORIGINAL_INITRD_="$DATA_PATH_/minirt26.gz"
+
+MEMTEST_IMAGE_="$DATA_PATH_/memtest"
+
+PXE_BOOT_MSG_="$DATA_PATH_/boot.msg"
+
+PXE_BOOT_LOGO_="$DATA_PATH_/logo.16"
+
--- /dev/null
+#!/static/ash
+
+PATH=/static
+
+kernel_version_=`uname -r`
+
+modules_to_load_=$(/static/discover --disable-bus all --enable-bus pci --type network --normalize-whitespace --data-path=linux/module/name --data-version=$kernel_version_)
+
+if [ $? -ne 0 ]; then
+ echo "Error: discover returned an error while discovering the appropriate nic module"
+ echo "$modules_to_load_"
+ return 1
+fi
+
+echo $modules_to_load_ | grep -v '^ $' | uniq
+return 0
--- /dev/null
+#!/bin/sh
+# Filename: terminalserver
+# Purpose: Program to do something
+# Authors: grml-team (grml.org), (c) Michael Gebetsroither <gebi@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Sat Aug 06 14:14:40 CEST 2005
+################################################################################
+
+
+###
+### __INCLUDES
+###
+. /etc/grml/sh-lib
+#. /etc/grml/sysexits-sh
+
+
+
+###
+### __VARIABLES
+###
+
+verbose_=0
+
+# this file holds all variable definitions
+SHARED_PROG_VARS_="/usr/share/grml-terminalserver/shared_prog_vars"
+isExistent $SHARED_PROG_VARS_ die
+. $SHARED_PROG_VARS_
+
+
+###
+### __FUNCTIONS
+###
+
+function printUsage
+{
+ cat <<EOT
+Usage: "$PROG_NAME__" [OPTIONS] <command>
+
+$PROG_NAME__ is the config program for the terminalserver
+comming with grml.
+
+COMMANDS:
+ help This help text
+ start <service> Start services
+ stop <service> Stop services
+ clean Stop all + remove config and boot files from services
+ <default> interactive
+
+SERVICES:
+ tftp Tftp daemon
+ dhcp Dhcp daemon
+ nfs All necessary nfs daemons
+ <> ALL services
+
+OPTIONS:
+ -v verbose (show what is going on, v++)
+ -h this help text
+
+EOT
+}
+
+
+# DHCP SERVICE {{{
+function createDhcpConf
+{
+ execute "mv -fb \"$DHCPD_CONFIG_FILE_\" \"$DHCPD_CONFIG_FILE_.old\"" eprint &>/dev/null
+
+ execute "source $TEMPLATE_CONFIG_DIR_/dhcpd_config" die
+}
+
+function removeDhcpConf
+{
+ rm -f "$DHCPD_CONFIG_FILE_"
+}
+
+
+function stopDhcp
+{
+ start-stop-daemon --stop --quiet --pidfile "$DHCPD_PID_"
+ rm -f $DHCPD_PID_
+ rm -f /var/lib/dhcp3/dhcpd.leases* 2>/dev/null #FIXME
+ touch /var/lib/dhcp3/dhcpd.leases
+}
+function startDhcp
+{
+ local conf_file_="$DHCPD_CONFIG_FILE_"
+
+ test -f $DHCPD_BIN_ || die "could not find dhcpd \"$DHCPD_BIN_\""
+ start-stop-daemon --start --quiet --pidfile "$DHCPD_PID_" \
+ --exec "$DHCPD_BIN_" -- -cf "$conf_file_" -q "$INTERFACE_" || warn "problems starting dhcpd"
+}
+function runDhcp
+{
+ isExistent "$DHCPD_CONFIG_FILE_" || \
+ warn "no config for dhcpd: \"$DHCPD_CONFIG_FILE_\" => not starting dhcpd" || return 1
+
+ stopDhcp
+ sleep 1
+ startDhcp
+}
+# }}}
+
+# TFTP SERVICE {{{
+function removeTftpConf
+{
+ rm -rf $TFTPD_DATA_DIR_/*
+}
+function createTftpConf
+{
+ removeTftpConf
+
+ execute "mkdir $TFTPD_DATA_DIR_/pxelinux.cfg" die
+ execute "install -m 644 /usr/lib/syslinux/pxelinux.0 $TFTPD_DATA_DIR_" die
+ execute "install -m 644 $PATH_/minirt26.gz $TFTPD_DATA_DIR_" die
+ execute "install -m 644 $KERNEL_IMAGE_ $TFTPD_DATA_DIR_/linux26" die
+ execute "install -m 644 $MEMTEST_IMAGE_ $TFTPD_DATA_DIR_/memtest" die
+ execute "install -m 644 $PXE_BOOT_MSG_ $TFTPD_DATA_DIR_" die
+ execute "install -m 644 $PXE_BOOT_LOGO_ $TFTPD_DATA_DIR_" die
+
+ execute "source $TEMPLATE_CONFIG_DIR_/grub-pxelinux_config" die
+}
+
+function stopTftp
+{
+ start-stop-daemon --stop --quiet --name "${TFTPD_BIN_##*/}"
+}
+function startTftp
+{
+ test -f $TFTPD_BIN_ || die "could not find \"$TFTPD_BIN_\""
+ start-stop-daemon --start --quiet --exec "$TFTPD_BIN_" -- -l -a "$IP_" -s "$TFTPD_DATA_DIR_" || \
+ warn "problems starting tftpd server"
+}
+function runTftp
+{
+ stopTftp
+ sleep 1
+ startTftp
+}
+# }}}
+
+
+# NFS {{{
+function startNfs
+{
+ /etc/init.d/portmap start
+ /etc/init.d/nfs-common start
+ # FIXME /etc/init.d/nfs-kernel-server start
+ $USR_SHARE_/nfs-kernel-server start
+
+ # FIXME Silly "/etc/init.d/nfs-kernel-server start"
+ # FIXME #246904 (init script does not start if no exports in /etc/exports)
+ execute "exportfs -o ro,no_root_squash,async,nohide $NETWORK_/$NETMASK_:$MOUNT_POINT_" warn
+ #execute "echo -e \"\n$MOUNT_POINT_ $NETWORK_/$NETMASK_(ro,no_root_squash,async)\" >> /etc/exports" warn
+}
+function stopNfs
+{
+ execute "exportfs -u -o ro,no_root_squash,async,nohide $NETWORK_/$NETMASK_:$MOUNT_POINT_" warn
+ if [[ `exportfs |wc -l` > 0 ]]; then
+ dprint "There are other exports, not stopping NFS serivces"
+ else
+ /etc/init.d/nfs-kernel-server stop >/dev/null 2>&1
+ /etc/init.d/nfs-common stop >/dev/null 2>&1
+ /etc/init.d/portmap stop >/dev/null 2>&1
+ fi
+}
+# }}}
+
+function allreadyConfigured
+{
+ isExistent "$CONF_FILE_" dprint || return 1
+ return 0
+}
+
+function createConfig
+{
+ # FIXME
+ execute "sed -i 's/^ALL/\#ALL/' /etc/hosts.deny" warn
+ execute "sed -i 's/^ALL : ALL@ALL : DENY/ALL : ALL@ALL : ALLOW/' /etc/hosts.allow" warn
+
+ createTftpConf
+ createDhcpConf
+}
+
+function actionStart
+{
+ createConfig
+
+ echo -n "Starting tftpd..."
+ runTftp
+ echo "done"
+ echo -n "Starting dhcpd..."
+ runDhcp
+ echo "done"
+ echo -n "Starting nfs..."
+ startNfs
+ echo "done"
+}
+
+function actionStop
+{
+ stopTftp
+ stopDhcp
+ stopNfs
+ notice "Terminal-server stopped"
+}
+
+function actionClean
+{
+ actionStop
+ removeTftpConf
+ removeDhcpConf
+ stopNfs
+}
+
+# SERVICES {{{
+function serviceStart
+{
+ local service_="$1" # service to start, if nothing => all
+
+ case "$service_" in
+ "") actionStart ;;
+ tftp) runTftp ;;
+ dhcp) runDhcp ;;
+ nfs) startNfs ;;
+ *) warn "Service $service_ not available" ;;
+ esac
+}
+
+function serviceStop
+{
+ local service_="$1" # service to stop, if nothing => all
+
+ case "$service_" in
+ "") actionStop ;;
+ tftp) stopTftp ;;
+ dhcp) stopDhcp ;;
+ nfs) stopNfs ;;
+ *) warn "Service $service_ not available" ;;
+ esac
+}
+# }}}
+
+###
+### __MAIN
+###
+
+while getopts "i:hv" opt; do
+ case "$opt" in
+ h) printUsage; exit ;;
+ v) let verbose_=$verbose_+1 ;;
+ ?) printUsage; exit 64 ;;
+ esac
+done
+shift $(($OPTIND - 1)) # set ARGV to the first not parsed commandline parameter
+setVerbose $verbose_
+
+case "$1" in
+ help) printUsage; exit 0 ;;
+esac
+
+checkRoot die "You have to be root to use this program"
+disableSyslog
+
+isExistent $DEFAULT_CONFIG_ die
+. $DEFAULT_CONFIG_
+. $CONFIG_
+# used config vars:
+# MOUNT_POINT_
+# KERNEL_IMAGE_
+# MEMTEST_IMAGE_
+# PXE_BOOT_MSG_
+# PXE_BOOT_LOGO_
+if [[ $MOUNT_POINT_ == "" || $KERNEL_IMAGE_ == "" || $MEMTEST_IMAGE_ == "" || \
+ $PXE_BOOT_MSG_ == "" || $PXE_BOOT_MSG_ == "" ]]; then
+ warn "MOUNT_POINT_=\"$MOUNT_POINT_\" \
+KERNEL_IMAGE_=\"$KERNEL_IMAGE_\" \
+MEMTEST_IMAGE_=\"$MEMTEST_IMAGE_\"
+PXE_BOOT_MSG_=\"$PXE_BOOT_MSG_\"
+PXE_BOOT_LOGO_=\"$PXE_BOOT_LOGO_\""
+ die "False configuration, please update $CONFIG_"
+fi
+
+case "$1" in
+ clean) actionClean; exit 0 ;;
+esac
+
+
+while true; do
+ isExistent "$CONF_FILE_" warn "sorry configfile \"$CONF_FILE_\" not found"
+ if [ $? -eq 1 ]; then
+ $CONFIG_PROG_ && continue
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "Question" --yesno \
+ "grml-terminalserver-config returned an error, do you want to quit now?" 5 75 && exit 1
+ else
+ break
+ fi
+done
+source $CONF_FILE_
+
+# check for necessary files
+check_necessary_files_='no'
+if [ "$1" == 'start' ]; then
+ case "$2" in
+ tftp|"") check_necessary_files_='yes' ;;
+ esac
+fi
+if [ $check_necessary_files_ == 'yes' ]; then
+ # test for files absolutly necessary for grml-terminalserver and created from -config
+ problem_=0
+ for i in $PATH_/minirt26.gz; do
+ isExistent $i warn || problem_=1
+ done
+ if [ $problem_ -eq 1 ]; then
+ die 'Some necessary files are missing, please rerun grml-terminalserver-config, or copy the files manually'
+ fi
+fi
+
+
+case "$1" in
+ start) serviceStart "$2" ;;
+ stop) serviceStop "$2" ;;
+ "") actionStart ;;
+ *) printUsage ;;
+esac
+
+# END OF FILE
+################################################################################
+# vim:foldmethod=marker
--- /dev/null
+#!/bin/sh
+# Filename: terminalserver-config
+# Purpose: Program to do something
+# Authors: grml-team (grml.org), (c) Michael Gebetsroither <gebi@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Sun May 08 22:21:32 CEST 2005 [gebi]
+################################################################################
+
+
+###
+### __INCLUDES
+###
+. /etc/grml/sh-lib
+#. /etc/grml/sysexits-sh
+
+
+
+###
+### __VARIABLES
+###
+
+verbose_=0
+
+# this file holds all variable definitions
+SHARED_PROG_VARS_="/usr/share/grml-terminalserver/shared_prog_vars"
+isExistent $SHARED_PROG_VARS_ die
+. $SHARED_PROG_VARS_
+
+# variables used in the config file for grml-terminalserver
+INTERFACE_=""
+IP_=""
+NETMASK_=""
+GW_=""
+NAMESERVERS_=""
+IPRANGE_FROM_=""
+IPRANGE_TO_=""
+NETWORK_=""
+OPTIONS_=""
+BOOT_ARGS_=""
+
+
+###
+### __FUNCTIONS
+###
+
+function printUsage
+{
+ cat <<EOT
+Usage: "$PROG_NAME__" [OPTIONS] <command>
+
+$PROG_NAME__ is the config program for the terminalserver
+comming with grml.
+
+COMMANDS:
+ help This text
+ interactive Interactive Configuration of the grml-terminalserver
+ grubConf Configure grub and make boot-image (for non-PXE NICs)
+ grubConfWrite Configure grub and write image to floppy disk
+ grubWrite Write compiled grub-image to floppy disk
+ grubMultiWrite batchwrite grub-image to floppy disk
+ initrd Only create the initrd
+ clean Remove all configfiles created during user configuration
+ <default> interactive
+
+OPTIONS:
+ -v verbose (show what is going on, v++)
+ -h this help text
+
+EOT
+}
+
+
+function writeConfig
+{
+ local date_=""
+
+ if [ -f $CONF_FILE_ ]; then
+ mv -fb $CONF_FILE_ ${CONF_FILE_}-old
+ fi
+
+ date_=`date`
+ cat <<EOT > $CONF_FILE_
+# GRML TERMINAL-SERVER CONFIG
+# created on "$date_"
+INTERFACE_="$INTERFACE_"
+IP_="$IP_"
+NETMASK_="$NETMASK_"
+GW_="$GW_"
+NAMESERVERS_="$NAMESERVERS_"
+IPRANGE_FROM_="$IPRANGE_FROM_"
+IPRANGE_TO_="$IPRANGE_TO_"
+NETWORK_="$NETWORK_"
+OPTIONS_="$OPTIONS_"
+BOOT_ARGS_="$BOOT_ARGS_"
+
+EOT
+ notice "config successfully safed to \"$CONF_FILE_\""
+}
+
+
+# AUTOMATIC CONFIGURATION {{{
+function checkParamArg
+{
+ local param_name="$1"
+ local arg="$2"
+
+ #eval "echo $`echo $test`"
+ echo $arg |grep "^[-|+]" &>/dev/null || return
+
+ die "Argument from $param_name looks like another parameter \"$arg\"" 1
+}
+
+function actionAutoconf
+{
+ checkParamArg "-i" "$interface_"
+}
+# }}}
+
+
+# INITRD {{{
+
+function actionMkInitrd
+{
+ echo "Creating initrd: $PATH_/minirt26.gz"
+ isExistent "$PATH_/minirt26.gz" && echo "$PATH_/minirt26.gz does allready exist, skipping initrd creation" && return 0
+ mkInitrd
+ echo 'done'
+}
+
+function mkInitrd
+{
+ TMP_DIR_=`mktemp -td terminalserver_initrd.XXXXXX`
+ local i=''
+ local tmp_loopname=''
+
+ # copying original initrd into $INITRD
+ execute "rm -r $INITRD_" 2>/dev/null
+ execute "cp $ORIGINAL_INITRD_ $TMP_DIR_/minirt26.gz" warn || return 1
+ execute "mkdir -p $INITRD_" warn || return 1
+ execute "mkdir -p $PATH_/mini-root.orig" warn || return 1
+ execute "gunzip $TMP_DIR_/minirt26.gz" warn || return 1
+ tmp_loopname=`findNextFreeLoop die`
+ execute "mount -o loop=$tmp_loopname $TMP_DIR_/minirt26 $PATH_/mini-root.orig " warn || return 1
+ execute "cp -a $PATH_/mini-root.orig/* $INITRD_" warn || return 1
+ execute "umount $PATH_/mini-root.orig" warn || return 1
+ losetup -d $tmp_loopname &>/dev/null
+ tmp_loopname=''
+ execute "rmdir $PATH_/mini-root.orig" warn || return 1
+ execute "rm $TMP_DIR_/minirt26" warn || return 1
+
+ # implanting my initrd changes into the original initrd
+
+ # copy programs, check if there are allready links with this name to busybox
+ for i in $USR_SHARE_/discover* $USR_SHARE_/udhcpc $USR_SHARE_/udhcp-config.sh $USR_SHARE_/cdir $USR_SHARE_/rdir /usr/bin/ldd ;do
+ tmp_name_="${i##*/}"
+ isNotExistent "$INITRD_/static/$tmp_name_" eprint || execute "rm $INITRD_/static/$tmp_name_"
+ cp $i "$INITRD_/static/$tmp_name_"
+ done
+ cp $USR_SHARE_/linuxrc $INITRD_/
+ mkdir -p $INITRD_/mylib
+ mkdir -p $INITRD_/myusr/i386-uclibc-linux/lib
+ for i in libdl libc libuClibc ld-uClibc; do
+ cp -a $UCLIBC_PATH_/$i*.so* $INITRD_/myusr/i386-uclibc-linux/lib
+ done
+
+ # copy data files for discover (discover-data)
+ mkdir -p $INITRD_/mylib/discover
+ cp /lib/discover/list.xml /lib/discover/pci-*.xml $INITRD_/mylib/discover/
+
+
+ #
+ # which modules should i put into the ramdisk
+ #
+
+ # get cards detected by discover
+ isNotExistent $CARDS_DETECTED_BY_DISCOVER && awk '/ethernet/{print $3}' /lib/discover/pci.lst |sort |uniq > $CARDS_DETECTED_BY_DISCOVER
+
+ local modules="`cat $CARDS_DETECTED_BY_DISCOVER |xargs` af_packet"
+ local modules_dep=""
+
+ # get paths of modules + paths of all dependet modules
+ echo -n "" >"$TMP_"
+ for i in $modules; do
+ tmp_=`awk -F: '{if($1~/'"$i".ko'/) {print $0}}' $MODULES_PATH_/$KERNEL_VERSION_/modules.dep`
+ echo "${tmp_%%:*}"
+ # FIXME ugly sed hack :(
+ echo "${tmp_#*:}" |xargs -n1 echo |sed 's/://'
+ done \
+ | sort | uniq | while read module relax; do
+ if [ -n "$module" ]; then
+ echo "$module" >> $TMP_
+ fi
+ done
+
+ # copy modules + dependend modules into ramdisk
+ local mod_path_="$INITRD_/mylib/modules/$KERNEL_VERSION_"
+ local tmp_dst_path_="$mod_path_/kernel"
+ mkdir -p $tmp_dst_path_
+ cat $TMP_ |sort |uniq |while read module; do
+ local tmp_path=${module#*/kernel/}
+ tmp_path=$tmp_dst_path_/${tmp_path%/*.ko}
+ local module_path=$tmp_path/${module##/*/}
+
+ isNotExistent "$tmp_path" dprint && mkdir -p "$tmp_path"
+ isNotExistent "$module_path" dprint && cp "$MODULES_PATH_ROOT_DIFF_/$module" "$module_path"
+ done
+
+ # copying additional modules
+ for i in fs/nfs/nfs.ko net/sunrpc/sunrpc.ko fs/lockd/lockd.ko net/packet/af_packet.ko; do
+ local tmp_path="$tmp_dst_path_/${i%/*}"
+ mkdir -p $tmp_path
+ cp $MODULES_PATH_/$KERNEL_VERSION_/kernel/$i "$tmp_path"
+ done
+
+ # generate modules.dep
+ cp $MODULES_PATH_/$KERNEL_VERSION_/modules.dep $mod_path_
+ #grep "^\/lib\/modules\/$KERNEL_VERSION_\/kernel\/" $MODULES_PATH_/$KERNEL_VERSION_/modules.dep |\
+ # sed "s/\/lib\/modules\/$KERNEL_VERSION_\/kernel\//\/modules\//g" > $mod_path_/modules.dep
+
+ # put everything into the new initrd
+ local tmp_size=`du -s $INITRD_ |awk '{print $1}'` # in kB
+ let tmp_size=$tmp_size+1000
+ if (( $tmp_size >= 16000 )); then
+ warn "Your initrd is $tmp_size kByte large => TOO BIG (should be 16000kByte)"
+ warn "Please remove a few modules from $CARDS_DETECTED_BY_DISCOVER or edit $INITRD_ manually"
+ return 1
+ fi
+
+ execute "dd if=/dev/zero of=$TMP_DIR_/minirt26 bs=${tmp_size}k count=1 &>/dev/null" warn || \
+ warn "could not create filesystem image"
+
+ tmp_loopname=`findNextFreeLoop die`
+ execute "losetup $tmp_loopname $TMP_DIR_/minirt26" die
+ execute "mke2fs -L \"GRML NETINIT\" -b 1024 -N 8192 -O none -F -q -m 0 $tmp_loopname" warn
+
+ execute "mkdir $PATH_/minirt26_mountp" warn
+ execute "mount $tmp_loopname $PATH_/minirt26_mountp" warn
+ execute "cp -a $INITRD_/* $PATH_/minirt26_mountp" warn
+ execute "umount $PATH_/minirt26_mountp" warn
+ execute "losetup -d $tmp_loopname &>/dev/null" warn
+ execute "rmdir $PATH_/minirt26_mountp" warn
+ execute "gzip -9 $TMP_DIR_/minirt26" warn
+ execute "rm -r $INITRD_" warn
+ execute "mv $TMP_DIR_/minirt26.gz $PATH_"
+ execute "rm -fr $TMP_DIR_"
+}
+# }}}
+
+
+# INTERACTIVE CONFIGURATION {{{
+
+function actionInteractive
+{
+ local i=""
+
+ dprint "running in interactive mode"
+
+ local card_title_="Choose network device connected to client network"
+ local card_message_="Available network devices:"
+ local iprange_title_="IP Address range for clients"
+local iprange_message_="
+Please enter the desired IP-Range of addresses that should be allocated by clients, separated by a single space.
+
+Example:
+ 192.168.0.101 192.168.0.200
+
+for addresses from 192.168.0.101 to (and including) 192.168.0.200.
+
+"
+ local runconfig_title_="Networkcard config"
+ local runconfig_message_="Would you like to configure your interfaces now?"
+ local grub_title_="Grub configuration"
+ local grub_message_="Do you have any NON-PXE network cards you would like to boot from?"
+
+ # on witch interfaces should we listen
+ local netdevices_="$(cat /proc/net/dev | awk -F: '/eth.:|tr.:/{print $1}')"
+ local device_list_=""
+ for INTERFACE_ in $netdevices_; do device_list_="$device_list_ ${INTERFACE_} Networkcard_${INTERFACE_##eth}"; done
+ echo -n "" >"$TMP_"
+ $DIALOG_ --backtitle "$BACK_TITLE_" --title "$card_title_" --menu "$card_message_" \
+ 0 0 18 $device_list_ 2>"$TMP_" || warn "could not get network-interface"
+ INTERFACE_="$(<$TMP_)" ; echo -n "" >"$TMP_"
+
+ while true; do
+ IP_=`netGetIp "$INTERFACE_" warn`
+ NETMASK_=`netGetNetmask "$INTERFACE_" warn`
+ netValidIp "$IP_" warn && break
+ $DIALOG_ --backtitle "$BACK_TITLE_" --title "$runconfig_title_" --yesno "$runconfig_message_" 18 45 && \
+ netcardconfig || die "Could not get interface" $?
+ done
+
+ IPRANGE_FROM_=`execute "ipcalc -n $IP_/$NETMASK_" warn |awk '/HostMin/{print $2}'`
+ IPRANGE_TO_=`execute "ipcalc -n $IP_/$NETMASK_" warn |awk '/HostMax/{print $2}'`
+ NETWORK_=$IPRANGE_FROM_
+ local iprange_=""
+ while [ -z "$IPRANGE_FROM_" -o -z "$IPRANGE_TO_" -o -z "$iprange_" ]; do
+ iprange_="$IPRANGE_FROM_ $IPRANGE_TO_"
+ echo -n "" >"$TMP_"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$iprange_title_ ($INTERFACE_=$IP_/$NETMASK_)" \
+ --inputbox "$iprange_message_" 18 75 "$iprange_" 2>"$TMP_" || die "problems getting network range" $?
+
+ iprange_="$(<$TMP_)"
+ IPRANGE_FROM_="${iprange_%% *}"
+ IPRANGE_TO_="${iprange_##* }"
+
+ for i in "$IPRANGE_FROM_" "$IPRANGE_TO_"; do
+ netValidIp "$i" warn || iprange_=""
+ done
+ done
+
+ NAMESERVERS_=`netGetNameservers warn`
+ GW_=`netGetDefaultGateway warn`
+
+
+ # grub
+ echo -n "" >"$TMP_"
+ local grub_write_="YES"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$grub_title_" --yesno "$grub_message_" 5 75 && \
+ grubConfig || grub_write_="NO"
+
+
+ # get options
+ #local OPT_IPTABLES_="yes"
+ #local OPT_SSH_="yes"
+ #local OPT_DISTCC_="yes"
+ #local OPT_SQUID_=""
+
+ local OPTIONS_TITLE_="Options"
+ local OPTIONS_MESSAGE_="Please give the appropriate options you want the clients to use:
+
+grml2hd - Make a non-interactive remote installation
+
+
+
+"
+# local OPTIONS_MESSAGE_="Please give the appropriate options you want the clients to use:
+#
+#iptables - Only the server should be able to access the clients
+#ssh - A ssh-key will be created on the server and distributed to the clients
+#distcc - You want to use the clients as compile-farm (ssh options recommned)
+#
+#"
+
+ local OPT_IPTABLES_DESC_="Start iptables on the clients"
+ local OPT_SSH_DESC_="Start ssh on the clients"
+ local OPT_DISTCC_DESC_="Start distcc on the clients"
+ local OPT_GRML2HD_DESC_="Remote install grml on the network clients"
+ # dialog options (enable if implemented)
+ #iptables "$OPT_IPTABLES_DESC_" off \
+ #ssh "$OPT_SSH_DESC_" off \
+ #distcc "$OPT_DISTCC_DESC_" off \
+ echo -n "" >"$TMP_"
+ $DIALOG_ --clear --separate-output --backtitle "$BACK_TITLE_" --title "$OPTIONS_TITLE_" --checklist "$OPTIONS_MESSAGE_" 25 80 10 \
+ grml2hd "$OPT_GRML2HD_DESC_" off \
+ 2>$TMP_ || die "could not get terminalserver options" $?
+ while read tmp_option_; do
+ OPTIONS_="$OPTIONS_ $tmp_option_"
+ done <$TMP_
+
+ # parse options
+ for i in $OPTIONS_; do
+ case "$i" in
+ grml2hd) optGrml2Hd || return 1 ;;
+ esac
+ done
+
+ echo -n "" >"$TMP_"
+ local OPTIONS_BOOTARG_MESSAGE_="Here you can add additional boot arguments for the clients seperated by spaces:
+
+Quite usefull examples:
+
+ssh=<pw> - Start ssh server and set password of user grml to pw
+services=<1,2,3> - Execute /etc/init.d/{1,2,3} start
+console=ttyS0,9600n8 - Initialise seriell console
+
+
+"
+ $DIALOG_ --clear --no-collapse --backtitle "$BACK_TITLE_" --title "$OPTIONS_TITLE_" --inputbox "$OPTIONS_BOOTARG_MESSAGE_" 0 0\
+ 2>$TMP_ || die "problems getting additional boot arguments"
+ BOOT_ARGS_="$BOOT_ARGS_ $(<$TMP_)"
+
+ writeConfig
+ if [ $grub_write_ == "YES" ]; then
+ grubWrite
+ fi
+ actionMkInitrd
+ notice "GRML terminalserver successfully configured"
+}
+# }}}
+
+# OPTIONS GETTING DIALOG {{{
+function optGrml2Hd
+{
+ local GRML2HD_TITLE_='Grml2hd options dialog'
+ local tmp_=''
+ local options_='BOOT_IMAGE=grml2hd'
+
+ # get partition to install grml2hd on
+ OPTIONS_PARTITION_MSG_='Please give me the target partition where to install grml'
+ PARTITION_TITLE_='Partition selection'
+ echo -n "" >"$TMP_"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$PARTITION_TITLE_" --inputbox \
+ "$OPTIONS_PARTITION_MSG_" 0 75 '/dev/hda1' 2>$TMP_ || die "problems getting partition"
+ tmp_="partition=$(<$TMP_)"
+ options_="$options_ $tmp_"
+
+ # get filesystem type
+ OPTION_FS_TYPE_='Please give me the filesystem type'
+ FS_TITLE_='Filesystem selection'
+ echo -n "" >"$TMP_"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$FS_TITLE_" --inputbox \
+ "$OPTION_FS_TYPE_" 0 75 'ext3' 2>$TMP_ || die "problems getting filesystem type"
+ tmp_="filesystem=$(<$TMP_)"
+ options_="$options_ $tmp_"
+
+ # get where to save mbr
+ OPTION_MBR_='Please give me the location where to save the mbr'
+ MBR_TITLE_='Select location of mbr'
+ echo -n "" >"$TMP_"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$MBR_TITLE_" --inputbox \
+ "$OPTION_MBR_" 0 75 '/dev/hda' 2>$TMP_ || die "problems getting location where to write mbr"
+ tmp_="mbr=$(<$TMP_)"
+ options_="$options_ $tmp_"
+
+ # get first user
+ OPTION_USER_='Who should be the first user on the system'
+ USER_TITLE_='User selection'
+ echo -n "" >"$TMP_"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$USER_TITLE_" --inputbox \
+ "$OPTION_USER_" 0 75 'grml' 2>$TMP_ || die "problems getting first user of system"
+ tmp_="user=$(<$TMP_)"
+ options_="$options_ $tmp_"
+
+ BOOT_ARGS_="$options_"
+}
+#}}}
+
+# GRUB CONFIG {{{
+function grubConfig
+{
+ local tmp_=`mktemp -td terminalserver_grub.XXXXXX` || warn "could not create tmp file for grubConfig"
+ if [ -z "$tmp_" ]; then return 1; fi
+
+ grubConfigWork $tmp_
+ local ret_=$?
+ execute "rm -rf $tmp_" warn
+
+ return $ret_
+}
+
+function grubConfigWork
+{
+ local tmp_="$1"
+
+ local grub_title_="Grub configuration"
+ local grub_nic_message_="
+Give me the types of network cards you would want to boot from.
+If you networkcard is allready listed press <OK>!
+
+WARNING: DON't add all NIC's, grub could possibly stop working!!"
+ local nics_=""
+
+ while read module_ desc_ mode_; do
+ nics_="$nics_ $module_ $desc_ $mode_"
+ done < $GRUB_NIC_CONF_
+
+ echo -n "" >$TMP_
+ local cmd_line_=""
+ $DIALOG_ --clear --separate-output --backtitle "$BACK_TITLE_" --title "$grub_title_" --checklist \
+ "$grub_nic_message_" 10 70 0 $nics_ 2>$TMP_
+ local ret_=$?
+ if [[ $ret_ -ne 0 || `wc -l <$TMP_` -eq 0 ]]; then
+ echo $ret_
+ warn "you should give me your specified NICs but didn't => DEFAULT will be used"
+ awk '/ on$/{print $1}' $GRUB_NIC_CONF_ >$TMP_
+ fi
+ while read module_; do
+ cmd_line_="$cmd_line_ --enable-$module_"
+ done < $TMP_
+
+ echo "\"$cmd_line_\""
+
+ execute "tar xzf $GRUB_SOURCE_ -C $tmp_" warn || return 1
+ execute "cd $tmp_/grub*" warn || return 1
+cat >preset-menu <<EOT
+# Set up the serial terminal, first of all.
+#serial --unit=0 --speed=19200
+#terminal --timeout=0 serial
+
+# Initialize the network.
+#dhcp --with-configfile
+#bootp --with-configfile
+dhcp
+default 0
+timeout 0
+title Load config from Tftp server
+ configfile (nd)/menu.lst
+EOT
+ #execute "./configure --enable-diskless --enable-preset-menu=./preset-menu $cmd_line_" warn || read
+ execute "./configure --enable-preset-menu=./preset-menu $cmd_line_" warn || read
+ execute "make -j2 CC=gcc-3.3" warn || read #return 1
+
+ local st1_="stage1/stage1"
+ local st2_="stage2/stage2"
+ isExistent $st1_ warn || return 1
+ isExistent $st2_ warn || return 1
+
+ execute "mv -fb $PATH_/grub.img $PATH_/grub.img.old"
+ execute "cat $st1_ $st2_ > $PATH_/grub.img" warn || return 1
+ return 0
+}
+
+function grubWrite
+{
+ local grub_title_="Grub configuration"
+ $DIALOG_ --clear --backtitle "$BACK_TITLE_" --title "$grub_title_" --yesno \
+ "Do you want to write your grub image to /dev/fd0" 5 75 || return 1
+
+ execute "dd if=$PATH_/grub.img of=/dev/fd0" warn || return 0
+ return 1
+}
+
+function grubMultiWrite
+{
+ local target_=${1:-'/dev/fd0'}
+
+ isExistent "$PATH_/grub.img" die "you must give me an image or run \"$PROG_NAME__ grubconf\""
+ isExistent "$target_" die "$target_ is not a valied"
+ while true; do
+ echo -n "Please insert disk into $target_ and press <ENTER> (STRG-C for end)"
+ read
+ dd if=$PATH_/grub.img of="$target_"
+ done
+}
+# }}}
+
+
+function removeTmpFiles
+{
+ execute "rm -f $TMP_" warn
+}
+
+function actionClean
+{
+ for i in dhcpd.conf grub.img minirt26.gz; do
+ execute "rm -f $PATH_/$i*"
+ done
+
+ for i in $CARDS_DETECTED_BY_DISCOVER $CONF_FILE_; do
+ execute "rm -f $i"
+ done
+
+}
+
+
+###
+### __MAIN
+###
+
+while getopts "i:hv" opt; do
+ case "$opt" in
+ i) interface_=$OPTARG ;;
+ h) printUsage; exit ;;
+ v) let verbose_=$verbose_+1 ;;
+ ?) printUsage; exit 64 ;;
+ esac
+done
+shift $(($OPTIND - 1)) # set ARGV to the first not parsed commandline parameter
+setVerbose $verbose_
+
+case "$1" in
+ help) printUsage; exit 0 ;;
+esac
+
+checkRoot die 'You have to be root to use this program'
+disableSyslog
+
+execute "mkdir -p $PATH_" die
+
+TMP_=`mktemp -t grml-terminalserver-config.XXXXXX` || die "Could not create tmpfile" $?
+setExitFunction 'removeTmpFiles'
+
+
+. $DEFAULT_CONFIG_
+. $CONFIG_
+# used config vars:
+# MODULES_PATH_
+# MODULES_PATH_ROOT_DIFF_
+# KERNEL_VERSION_
+# ORIGINAL_INITRD_
+if [[ $MODULES_PATH_ == "" || $KERNEL_VERSION_ == "" || $ORIGINAL_INITRD_ == "" ]]; then
+ warn "MODULES_PATH_=\"$MODULES_PATH_\" \
+KERNEL_VERSION_=\"$KERNEL_VERSION_\" \
+ORIGINAL_INITRD_=\"$ORIGINAL_INITRD_\""
+ die "False configuration, please update $CONFIG_"
+fi
+
+
+case "$1" in
+ interactive) actionInteractive ;;
+ grubConf) grubConfig ;;
+ grubConfWrite) grubConfig && grubWrite ;;
+ grubWrite) grubWrite ;;
+ grubMultiWrite) grubMultiWrite "$2" ;;
+ initrd) actionMkInitrd ;;
+ clean) actionClean ;;
+ *) actionInteractive ;;
+esac
+
+removeTmpFiles
+# END OF FILE
+################################################################################
+# vim:foldmethod=marker
--- /dev/null
+3c503 3Com_Etherlink2 on
+3c503-shmem 3Com_Etherlink2 off
+3c503-aui 3Com_Etherlink2_AUI off
+3c507 3Com off
+3c509 3Com on
+3c529 3Com off
+3c595 3Com off
+3c90x 3Com on
+cs89x0 Crystal_Semiconductor off
+davicom DM9102/DM9009 off
+depca DE100/DE200 off
+eepro Intel_Ethernetexpress_Pro/10 off
+eepro100 Intel_Ethernetexpress_Pro/100 on
+epic100 SMC_83c170 on
+exos205 EXOS205 off
+ni5210 Racal-Interlan off
+lance Lance_PCNet/AMD_HomePNA off
+ne2100 Novell_NE2100/NE1500 off
+ni6510 Racal-Interlan off
+ni5010 Racal-Interlan off
+ne NE1000/2000_ISA off
+ns8390 NE2000_PCI_RTL8029 on
+wd WD8003/8013_SMC8216/8416 off
+otulip Old_tulip_clones off
+rtl8139 Realtek8139/SMC1211/D-Link_DFE530TX/DFE538TX on
+sis900 SIS900/SIS7016 on
+sk-g16 Schneider_koch_G16 off
+smc9000 SMC9000 off
+tiara Tiara/Fujitsu_Lancard off
+tulip Tulip/Tulip-clonse/Linksys/Intel_tulip/Compex on
+via-rhine Rhine-1/Rhine-2/Dlink_DFE-530TX on
+w89c840 Winbond_W89c840/Compex_RL100-ATX off
--- /dev/null
+#!/static/sh
+# Filename: /linuxrc
+# Purpose: minirt for kernel 2.6
+# Authors: (c) Klaus Knopper <knoppix@knopper.net>, (c) Michael Prokop <mika@grml.org>
+# Latest change: Die Apr 19 11:44:14 CEST 2005 [mika]
+#######################################################################################
+
+# hardcoded configurable options
+# Default maximum size of dynamic ramdisk in kilobytes
+RAMSIZE=1000000
+# End of options
+
+# Don't allow interrupt signals
+trap "" 1 2 3 15
+
+# Misc functions
+INSMOD="insmod"
+[ -x /modules/insmod ] && INSMOD="/modules/insmod"
+
+RMMOD="rmmod"
+[ -x /modules/rmmod ] && RMMOD="/modules/rmmod"
+
+# Builin filesystems
+#BUILTIN_FS="iso9660 ext2 ext3 reiserfs vfat reiser4"
+BUILTIN_FS="iso9660 ext2 vfat"
+
+mountit(){
+# Usage: mountit src dst "options"
+# Uses builtin mount of ash.grml
+ for fs in $BUILTIN_FS; do
+ test -b $1 && mount -t $fs $3 $1 $2 >/dev/null 2>&1 && return 0
+ done
+ return 1
+}
+
+FOUND_SCSI=""
+FOUND_GRML=""
+INTERACTIVE=""
+
+# Clean input/output
+exec >/dev/console </dev/console 2>&1
+
+# Mount /proc and /dev/pts
+mount -t proc /proc /proc
+
+# Disable kernel messages while probing modules in autodetect mode
+echo "0" > /proc/sys/kernel/printk
+
+mount -t devpts /dev/pts /dev/pts
+# Kernel 2.6
+mount -t sysfs /sys /sys >/dev/null 2>&1
+
+# Read boot command line with builtin cat command (shell read function fails in Kernel 2.4.19-rc1)
+CMDLINE="$(cat /proc/cmdline)"
+
+# Simple shell grep
+stringinfile(){
+ case "$(cat $2)" in *$1*) return 0;; esac
+ return 1
+}
+
+# same for strings
+stringinstring(){
+ case "$2" in *$1*) return 0;; esac
+ return 1
+}
+
+# Reread boot command line; echo last parameter's argument or return false.
+getbootparam(){
+ stringinstring " $1=" "$CMDLINE" || return 1
+ result="${CMDLINE##*$1=}"
+ result="${result%%[ ]*}"
+ echo "$result"
+ return 0
+}
+
+# Check boot commandline for specified option
+checkbootparam(){
+ stringinstring " $1" "$CMDLINE"
+ return "$?"
+}
+
+if checkbootparam "nocolor" ; then
+ echo "Disabling colors in bootsequence as requested on commandline."
+ # Reset fb color mode
+ RESET="\e]R"
+ # ANSI COLORS
+ # Erase to end of line
+ CRE="\r\e[K"
+ # Clear and reset Screen
+ CLEAR="\ec"
+else
+ # Reset fb color mode
+ RESET="\e]R"
+ # ANSI COLORS
+ # Erase to end of line
+ CRE="\r\e[K"
+ # Clear and reset Screen
+ CLEAR="\ec"
+ # Normal color
+ NORMAL="\e[0;39m"
+ # RED: Failure or error message
+ RED="\e[1;31m"
+ # GREEN: Success message
+ GREEN="\e[1;32m"
+ # YELLOW: Descriptions
+ YELLOW="\e[1;33m"
+ # BLUE: System mesages
+ BLUE="\e[1;34m"
+ # MAGENTA: Found devices or drivers
+ MAGENTA="\e[1;35m"
+ # CYAN: Questions
+ CYAN="\e[1;36m"
+ # BOLD WHITE: Hint
+ WHITE="\e[1;37m"
+fi
+
+# helper functions {{{
+#log_success_msg () {
+# echo " * $@"
+#}
+
+log_failure_msg () {
+ echo " ${RED}*${NORMAL} $@"
+}
+
+#log_warning_msg () {
+# echo " ${BLUE}*${NORMAL} $@"
+#}
+
+# int log_begin_message (char *message)
+log_begin_msg () {
+ echo -n " ${GREEN}*${NORMAL} $@"
+}
+
+# int log_end_message (int exitstatus)
+SUCCESS=" ${BLUE}[ ${GREEN}ok ${BLUE}]${NORMAL}"
+FAILED=" ${NORMAL}[${RED}fail${NORMAL}]"
+# }}}
+
+# Clear screen with colormode reset
+# echo "$CLEAR$RESET"
+# echo "$CLEAR"
+# Just go to the top of the screen
+# echo -n "\e[H\e[J"
+echo ""
+# Be verbose
+#echo "${WHITE}Welcome to ${CYAN}G${YELLOW}R${WHITE}M${RED}L${WHITE}!${NORMAL}"
+#echo ""
+#echo ""
+
+echo "${WHITE}Welcome to"
+echo ""
+echo "${RED} ____ ____ __ __ _ "
+echo "${RED} / ___| _ \| \/ | | "
+echo "${RED} | | _| |_) | |\/| | | "
+echo "${RED} | |_| | _ <| | | | |___ "
+echo "${RED} \____|_| \_\_| |_|_____|"
+echo ""
+echo "${WHITE}grml.org - Linux for users of texttools and sysadmins."
+echo "${NORMAL}"
+
+# We only need the builtin commands and /static at this point
+PATH=/static
+export PATH
+
+umask 022
+
+# Check if we are in interactive startup mode
+case "$CMDLINE" in *BOOT_IMAGE=expert\ *) INTERACTIVE="yes"; :>/interactive; ;; esac
+case "$CMDLINE" in *modules-disk*) INTERACTIVE="yes"; ;; esac
+#case "$CMDLINE" in *BOOT_IMAGE=debug\ *|*\ debug\ *) DEBUG="yes"; ;; esac
+case "$CMDLINE" in *debug*) DEBUG="yes"; ;; esac
+# Does the user want to skip scsi detection?
+NOSCSI=""
+case "$CMDLINE" in *noscsi*|*nobootscsi*) NOSCSI="yes"; ;; esac
+case "$CMDLINE" in *nousb*|*nobootusb*) NOUSB="yes"; ;; esac
+case "$CMDLINE" in *nofirewire*|*nobootfirewire*) NOFIREWIRE="yes"; ;; esac
+NOCD=""
+case "$CMDLINE" in *fromhd*) NOCD="yes"; ;; esac
+case "$CMDLINE" in *fromdvd*) FROMDVD="yes"; ;; esac
+case "$CMDLINE" in *idecd*|*atapicd*) IDECD="yes"; ;; esac
+case "$CMDLINE" in *noideraid*) NOIDERAID="yes"; ;; esac
+USB2="ehci-hcd.ko"
+case "$CMDLINE" in *nousb2*) USB2=""; ;; esac
+
+GRML_DIR="GRML"
+GRML_NAME="GRML"
+case "$CMDLINE" in *grml_dir=*) GRML_DIR="$grml_dir"; ;; esac
+case "$CMDLINE" in *grml_name=*) GRML_NAME="$grml_name"; ;; esac
+
+# WARNING: In Kernel 2.4.27, CD-Roms cease to work if both, ide-scsi and ide-cd, are loaded. :-(
+#if test -n "$IDECD"; then
+# Use ide-cd for ATAPI-only CD-Rom(s)
+#$INSMOD /modules/scsi/ide-cd.ko >/dev/null 2>&1
+#$INSMOD /modules/scsi/ide-cd.ko
+#else
+# Check for IDE-SCSI capable CD-Rom(s) first
+#$INSMOD /modules/scsi/ide-scsi.ko >/dev/null 2>&1
+#$INSMOD /modules/scsi/ide-scsi.ko
+#fi
+
+# Run a shell if in debug mode
+# echo "${BLUE}Dropping you to a busybox shell for debugging.${NORMAL}"
+stage=1
+rundebugshell(){
+ if [ -n "$DEBUG" ]; then
+ echo "${CRE}${BLUE}Starting intermediate shell stage $stage as requested by \"debug\" option.${NORMAL}"
+ echo "${CRE}${BLUE}Just exit the shell to continue boot process...${NORMAL}"
+ [ -x /static/sh ] && /static/sh || /bin/bash
+fi
+}
+
+# Mount module disk
+mountmodules(){
+TYPE="$1"; shift
+echo -n "${CRE}Please insert ${TYPE} modules disk and hit Return."
+read a
+echo -n "${CRE}Mounting ${TYPE} modules disk... "
+# We always mount over /modules/scsi (because it's there ;-)
+if mountit /dev/fd0 /modules/scsi "-o ro"; then
+echo "${GREEN}OK.${NORMAL}"
+return 0
+fi
+echo "${RED}NOT FOUND.${NORMAL}"
+return 1
+}
+
+# Unmount module disk
+umountmodules(){
+TYPE="$1"; shift
+echo -n "${CRE}Unmounting ${TYPE} modules disk... "
+umount /modules/scsi 2>/dev/null
+echo "${GREEN}DONE.${NORMAL}"
+}
+
+# Ask user for modules
+askmodules(){
+TYPE="$1"; shift
+echo "${TYPE} modules available:${WHITE}"
+c=""; for m in "$@"; do
+if test -f "/modules/scsi/$m"; then
+test -z "$c" && { echo -n " $m"; c="1"; } || { echo " $m"; c=""; }
+fi
+done
+[ -n "$c" ] && echo ""
+echo "Load ${TYPE} Modules?"
+echo "[Enter full filename(s) (space-separated), Return for autoprobe, n for none] "
+echo -n "insmod module(s)> "
+read MODULES
+case "$MODULES" in n|N) MODULES=""; ;; y|"") MODULES="$*"; ;; esac
+}
+
+# Try to load the given modules (full path or current directory)
+loadmodules(){
+TYPE="$1"; shift
+test -n "$INTERACTIVE" && echo "6" > /proc/sys/kernel/printk
+for i in "$@"; do
+echo -n "${CRE}Probing ${TYPE}... ${WHITE}$i${NORMAL}"
+if test -f /modules/scsi/$i && $INSMOD -f /modules/scsi/$i >/dev/null 2>&1
+then
+# case "$i" in *ataraid*) ;; *) echo "${CRE} ${GREEN}Found ${TYPE} device(s) handled by ${MAGENTA}$i${GREEN}.${NORMAL}" ;; esac
+case "$TYPE" in scsi|SCSI) FOUND_SCSI="yes"; ;; esac
+fi
+done
+test -n "$INTERACTIVE" && echo "0" > /proc/sys/kernel/printk
+echo -n "${CRE}"
+}
+
+# Check for SCSI, use modules on bootfloppy first
+# Trying to do kind of /proc/pci hardware detection
+PROCPCI="`cat /proc/pci 2>/dev/null`"
+#ISA_SCSI="aha1740.ko aha1542.ko aha152x.ko pas16.ko psi240i.ko qlogicfas.ko qlogicfc.ko seagate.ko t128.ko u14-34f.ko wd7000.ko"
+ISA_SCSI="aha1740.o aha1542.o aha152x.o pas16.o psi240i.o qlogicfas.o qlogicfc.o seagate.o t128.o u14-34f.o wd7000.o"
+SCSI_PROBE="$ISA_SCSI"
+case "$PROCPCI" in *[Aa][Ii][Cc]-*|*[Aa][Hh][Aa]-*) SCSI_PROBE="$SCSI_PROBE aic7xxx.o" ;; esac
+case "$PROCPCI" in *[Bb][Uu][Ss][Ll][Oo][Gg][Ii][Cc]*) SCSI_PROBE="$SCSI_PROBE BusLogic.ko" ;; esac
+case "$PROCPCI" in *53[Cc]8*) SCSI_PROBE="$SCSI_PROBE ncr53c8xx.o" ;; esac
+#case "$PROCPCI" in *53[Cc]9*) SCSI_PROBE="$SCSI_PROBE NCR53C9x.ko" ;; esac
+case "$PROCPCI" in *53[Cc]406*) SCSI_PROBE="$SCSI_PROBE NCR53c406a.ko" ;; esac
+case "$PROCPCI" in *[Ii][Nn][Ii][Tt][Ii][Oo]\ *|*[Ii][Nn][Ii]-[Aa]100[Uu]2[Ww]*) SCSI_PROBE="$SCSI_PROBE initio.ko" ;; esac
+case "$PROCPCI" in *[Mm][Pp][Tt]*[Ss][Cc][Ss][Ii]*) SCSI_PROBE="$SCSI_PROBE mptscsih.ko" ;; esac
+case "$PROCPCI" in *[Aa][Dd][Vv][Aa][Nn][Cc][Ee][Dd]\ [Ss][Yy][Ss]*) SCSI_PROBE="$SCSI_PROBE advansys.ko" ;; esac
+case "$PROCPCI" in *[Aa][Tt][Pp]8|*[Aa][Ee][Cc]6*) SCSI_PROBE="$SCSI_PROBE atp870u.ko" ;; esac
+case "$PROCPCI" in *[Dd][Tt][Cc]*) SCSI_PROBE="$SCSI_PROBE dtc.ko" ;; esac
+case "$PROCPCI" in *[Ee][Aa][Tt][Aa]*) SCSI_PROBE="$SCSI_PROBE eata.ko" ;; esac
+case "$PROCPCI" in *[Ff]*[Dd][Oo][Mm][Aa][Ii][Nn]*) SCSI_PROBE="$SCSI_PROBE fdomain.ko" ;; esac
+case "$PROCPCI" in *[Gg][Dd][Tt]\ *) SCSI_PROBE="$SCSI_PROBE gdth.ko" ;; esac
+case "$PROCPCI" in *[Mm][Ee][Gg][Aa][Rr][Aa][Ii][Dd]*) SCSI_PROBE="$SCSI_PROBE megaraid.ko" ;; esac
+#case "$PROCPCI" in *[Pp][Cc][Ii]-22*) SCSI_PROBE="$SCSI_PROBE pci2220i.ko" ;; esac
+#case "$PROCPCI" in *[Pp][Cc][Ii]-2000*) SCSI_PROBE="$SCSI_PROBE pci2000.ko" ;; esac
+case "$PROCPCI" in *[Qq][Ll][Oo][Gg][Ii][Cc]*) SCSI_PROBE="$SCSI_PROBE qlogicisp.ko" ;; esac
+case "$PROCPCI" in *53[Cc]974*) SCSI_PROBE="$SCSI_PROBE tmscsim.ko" ;; esac
+case "$PROCPCI" in *[Uu][Ll][Tt][Rr][Aa][Ss][Tt][Oo][Rr]*) SCSI_PROBE="$SCSI_PROBE ultrastor.ko" ;; esac
+case "$PROCPCI" in *3[Ww][Aa][Rr][Ee]*) SCSI_PROBE="$SCSI_PROBE 3w-xxxx.ko" ;; esac
+# modules/scsi/3w-9xxx.ko
+# modules/scsi/a100u2w.ko
+# modules/scsi/aic7xxx_old_CAUTION.ko
+
+if test -n "$INTERACTIVE"; then
+# Let the user select interactively
+askmodules SCSI $(cd /modules/scsi; echo *.ko)
+else
+# these are the autoprobe-safe modules
+MODULES="$SCSI_PROBE"
+fi
+
+test -z "$NOSCSI" && test -n "$MODULES" && loadmodules SCSI $MODULES
+# End of SCSI check
+
+## test -z "$NOSCSI" && \
+if checkbootparam scsi ; then
+ MODULE="$(getbootparam 'scsi' 2>/dev/null)"
+ if test "$MODULE" = "probe" ; then
+ echo "Bootoption scsi=probe found. Trying to autoprobe SCSI modules:" && \
+ loadmodules SCSI $MODULES
+ else
+ [ -n "$MODULE" ] || echo "${RED}Neither a specific module nor option probe for SCSI module given. Skipping.${NORMAL}"
+ [ -n "$MODULE" ] && echo "Trying to load module ${WHITE}${MODULE}${NORMAL}." && \
+ /modules/insmod "/modules/scsi/${MODULE}.ko"
+ fi
+fi
+#
+#if checkbootparam module ; then
+# MODULE="$(getbootparam 'module' 2>/dev/null)"
+# # ehci-hcd ieee1394 ohci1394 ohci-hcd sbp2 uhci-hcd usbcore usb-storage
+# [ -n "$MODULE" ] && echo "${BLUE}Trying to load module ${MAGENTA}${MODULE}${BLUE}.${NORMAL}" && \
+# /modules/insmod "/modules/div/${MODULE}.ko"
+#fi
+
+#test -z "$NOSCSI" && \
+#/static/discover --disable-bus all --enable-bus scsi --type bridge --normalize-whitespace --data-path=linux/module/name --data-version=`uname -r` | grep -v '^ $' | uniq
+#echo "pci:"
+#/static/discover --disable-bus all --enable-bus pci --type bridge --normalize-whitespace --data-path=linux/module/name --data-version=`uname -r` | grep -v '^ $' | uniq
+#echo "End of Debugging SCSI"
+#
+#echo "Commands are:"
+#echo "
+#/static/discover --disable-bus all --enable-bus scsi --type bridge --normalize-whitespace --data-path=linux/module/name --data-version=\`uname -r\` | grep -v '^ $' | uniq
+#/static/discover --disable-bus all --enable-bus pci --type bridge --normalize-whitespace --data-path=linux/module/name --data-version=\`uname -r\` | grep -v '^ $' | uniq
+#"
+#echo "Starting ash:"
+#/static/ash
+#echo "End of starting ash"
+
+# Check for IDE-Raid devices
+if test -z "$NOIDERAID"; then
+( cd /modules/scsi; { $INSMOD ataraid.ko >/dev/null 2>&1 && $INSMOD silraid.ko >/dev/null 2>&1 ; } || $INSMOD medley.ko >/dev/null 2>&1 || $INSMOD pdcraid.ko >/dev/null 2>&1 )
+fi
+# End of IDE-Raid check
+
+# Check for USB, use modules on bootfloppy first
+if test -z "$NOUSB"; then
+echo -n "${CRE}Checking for for USB..."
+if test -f /modules/div/usbcore.ko; then
+$INSMOD /modules/div/usbcore.ko >/dev/null 2>&1
+FOUNDUSB=""
+
+for i in $USB2 usb-uhci.ko usb-ohci.ko; do
+test -f /modules/div/$i && $INSMOD /modules/div/$i >/dev/null 2>&1 && FOUNDUSB="yes"
+done
+if test -n "$FOUNDUSB"; then
+test -f /modules/div/usb-storage.ko && $INSMOD /modules/div/usb-storage.ko >/dev/null 2>&1
+else
+# For an unknown reason, unloading usbcore hangs smetimes
+# rmmod usbcore >/dev/null 2>&1
+true
+fi
+fi
+echo -n "${CRE}"
+fi
+# End of USB check
+
+# Check for Firewire, use modules on bootfloppy first
+if test -z "$NOFIREWIRE"; then
+echo -n "${CRE}Checking for Firewire..."
+if test -f /modules/div/ieee1394.ko; then
+echo -n "${CRE}Loading ieee1394..."
+$INSMOD /modules/div/ieee1394.ko >/dev/null 2>&1
+FOUNDFIREWIRE=""
+for i in ohci1394.ko; do
+echo -n "${CRE}Loading $i..."
+test -f /modules/div/$i && $INSMOD /modules/div/$i >/dev/null 2>&1 && FOUNDFIREWIRE="yes"
+done
+if test -n "$FOUNDFIREWIRE"; then
+echo -n "${CRE}Loading sbp2.ko..."
+test -f /modules/scsi/sbp2.ko && $INSMOD /modules/scsi/sbp2.ko sbp2_serialize_io=1 >/dev/null 2>&1
+else
+# For an unknown reason, unloading ieee1394 hangs smetimes
+# echo -n "${CRE}${BLUE}Unloading ieee1394...${NORMAL}"
+# rmmod ieee1394 >/dev/null 2>&1
+true
+fi
+fi
+echo -n "${CRE}"
+fi
+# End of FIREWIRE check
+
+# Unfortunately, hotpluggable devices tend to need some time in order to register
+if test -n "$FOUNDUSB" -o -n "$FOUNDFIREWIRE"; then
+log_begin_msg "Scanning for USB/Firewire devices."
+if test -n "$FOUNDFIREWIRE"; then
+# Wait for driver to register
+sleep 2
+# Kernel 2.6 does this automatically
+#case "$(cat /proc/version 2>/dev/null)" in *version\ 2.6.*) ;; *) for host in 0 1 2 3 4 5 6 7; do for channel in 0 1; do for id in 0 1 2 3 4 5 6 7; do echo "scsi add-single-device $host $channel $id 0" >/proc/scsi/scsi 2>/dev/null; done; done; done ;; esac
+fi
+# sleep 6
+echo " $SUCCESS"
+fi
+
+# Check for misc modules in expert mode
+if test -n "$INTERACTIVE"; then
+another=""; answer=""
+while test "$answer" != "n" -a "$answer" != "N"; do
+echo -n "${CYAN}Do you want to load additional modules from$another floppy disk? [${WHITE}Y${CYAN}/n] ${NORMAL}"
+another=" another"
+read answer
+case "$answer" in n*|N*) break; ;; esac
+if mountmodules new; then
+askmodules new $(cd /modules/scsi; echo *.ko)
+test -n "$MODULES" && loadmodules new $MODULES
+umountmodules current
+fi
+done
+fi
+# All interactively requested modules should be loaded now.
+
+# Check for ide-scsi supported CD-Roms et al.
+test -f /proc/scsi/scsi && FOUND_SCSI="yes"
+
+# Disable kernel messages again
+echo "0" > /proc/sys/kernel/printk
+
+# We now enable DMA right here, for faster reading/writing from/to IDE devices
+# in FROMHD or TORAM mode
+case "$CMDLINE" in *\ nodma*) ;; *)
+for d in $(cd /proc/ide 2>/dev/null && echo hd[a-z]); do
+if test -d /proc/ide/$d; then
+MODEL="$(cat /proc/ide/$d/model 2>/dev/null)"
+test -z "$MODEL" && MODEL="[GENERIC IDE DEVICE]"
+log_begin_msg "Enabling DMA acceleration for: ${MAGENTA}$d ${YELLOW}[${MODEL}]${NORMAL}"
+echo "using_dma:1" >/proc/ide/$d/settings && echo ""
+fi
+done
+;;
+esac
+
+stage=2
+rundebugshell
+echo "before NFS"
+for i in $cmdline; do case "$i" in nfsdir=*|NFSDIR=*) eval $i;; esac; done
+[ -n "$nfsdir" ] && NFS="$nfsdir"
+echo "nfsdir=$NFS"
+# NFS
+if [ -n "$NFS" ]; then
+ tmp_="$(getbootparam nfsdir)"
+ echo -n "checkbootparam nfsdir "
+ checkbootparam "nfsdir" && echo "OK" || echo "FAILED"
+ echo "getbootparam nfsdir=\"$tmp_\""
+
+ # put the mylibs into /lib for discover and udhcpc
+ cdir
+
+ # starting hw-detection for network card
+ echo "Starting hw-detection"
+ kernel_version_=`uname -r`
+ modules_to_load=$(/static/discover --disable-bus all --enable-bus pci --type network --normalize-whitespace --data-path=linux/module/name --data-version=$kernel_version_ | grep -v '^ $' | uniq)
+ echo "trying to load the following network modules: \"$modules_to_load\""
+
+ # FIXME modprobe is buggy from busybox
+ modules_to_load=`echo $modules_to_load | xargs`
+ modLoad()
+ {
+ for mod in $@ ; do
+ tmp_="`modprobe -vn $mod`"
+ if [ $? -ne 0 ]; then
+ continue
+ fi
+ eval "$tmp_"
+ done
+ }
+ modLoad "$modules_to_load"
+
+ # loading additional modules
+ modLoad sunrpc lockd af_packet nfs
+
+ /static/udhcpc --foreground --quit --script=/static/udhcp-config.sh
+ #echo "press <enter> to start a system shell and configure your system"
+ #sh
+
+ # recreate the old dir structures
+ rdir
+ #rm -rf /myusr /mylib
+
+ log_begin_msg "${RED}Debug: NFS = ${NFS}${NORMAL}"
+ log_begin_msg -n "${CRE}${BLUE}Looking for GRML in: ${MAGENTA}$NFS${NORMAL} "
+ if mount -t nfs "$NFS" -o "async,ro,nolock" /cdrom #>/dev/null 2>&1
+ then
+ if test -f /cdrom/$GRML_DIR/$GRML_NAME
+ then
+ log_begin_msg -n "${CRE} ${GREEN}Accessing grml CDROM at ${MAGENTA}$NFS${GREEN}...${NORMAL}"
+ FOUND_GRML="$NFS"
+ break
+ fi
+ fi
+fi
+echo "after NFS"
+
+
+# Now that the right SCSI driver is (hopefully) loaded, try to find CD-ROM
+if test -z $NFS ; then
+ DEVICES="/dev/hd?"
+ test -n "$FOUND_SCSI" -a -z "$NOCD" && DEVICES="/dev/scd? /dev/scd?? $DEVICES"
+ # New: Also try parallel port CD-Roms [for Mike].
+ DEVICES="$DEVICES /dev/pcd?"
+ # New: also check HD partitions for a GRML/GRML image
+ test -n "$FOUND_SCSI" -a -z "$NOSCSI" && DEVICES="$DEVICES /dev/sd?[1-9] /dev/sd?[1-9][0-9]"
+ DEVICES="$DEVICES /dev/hd?[1-9] /dev/hd?[1-9][0-9]"
+ case "$CMDLINE" in *fromhd=/dev/*) DEVICES="$fromhd"; ;; esac
+ for i in $DEVICES
+ do
+ log_begin_msg "${CRE} ${GREEN}*${NORMAL} Looking for CD-ROM in: ${MAGENTA}$i${NORMAL}"
+ if mountit $i /cdrom "-o ro" >/dev/null 2>&1
+ then
+ echo " $SUCCESS"
+ if test -f /cdrom/$GRML_DIR/$GRML_NAME
+ then
+ log_begin_msg "Accessing grml CD-ROM at: ${MAGENTA}$i${NORMAL}" ; echo " $SUCCESS"
+ FOUND_GRML="$i"
+ break
+ fi
+ umount /cdrom
+ fi
+ done
+fi
+
+# Harddisk-installed script part version has been removed
+# (GRML can be booted directly from HD now).
+
+mount_grml()
+{
+ if test -n "$FOUND_GRML" -a -f $1/$GRML_DIR/$GRML_NAME; then
+ # DEBUG
+ # echo "6" > /proc/sys/kernel/printk
+ # cloop:
+ #$INSMOD -f /modules/cloop.ko file=$1/$GRML_DIR/$GRML_NAME
+ #mountit /dev/cloop /GRML "-o ro" || FOUND_GRML=""
+ # squashfs:
+ #losetup /dev/loop0 $1/$GRML_DIR/$GRML_NAME
+ mount -t squashfs $1/$GRML_DIR/$GRML_NAME /GRML -o loop,ro || FOUND_GRML=""
+ fi
+
+# COMP=""
+# case $(dd if=$1/$KNOPPIX_DIR/$KNOPPIX_NAME bs=4 count=1 2>/dev/null) in
+# "#!/b") COMP=cloop
+# $INSMOD /modules/cloop.o file=$1/$KNOPPIX_DIR/$KNOPPIX_NAME
+# mountit /dev/cloop /KNOPPIX "-o ro" || FOUND_KNOPPIX=""
+# ;;
+# "hsqs") COMP=squashfs
+# mount -t squashfs $1/$KNOPPIX_DIR/$KNOPPIX_NAME /KNOPPIX -o loop,ro || FOUND_KNOPPIX=""
+# #losetup /dev/loop0 $1/$KNOPPIX_DIR/$KNOPPIX_NAME
+# #mount -t squashfs /dev/loop0 /KNOPPIX -o loop,ro || FOUND_KNOPPIX=""
+# ;;
+# esac
+}
+
+remount_grml()
+{
+ if test -f $TARGET/$GRML_DIR/$GRML_NAME; then
+ umount /GRML # unmount it
+ # echo "$RMMOD cloop" | /static/sh # release CD - ash crashes with parts of libc in memory -- FF
+ umount $SOURCE # unmount CD
+ [ -n "$SOURCE2" ] && umount $SOURCE2 # umount possible loop-device
+ mount_grml $TARGET
+ else
+ echo "${CRE} ${RED}Warning: Changing to $TARGET failed.${NORMAL}"
+ return 1
+ fi
+
+ return 0
+}
+
+boot_from()
+{
+ # preparations
+ /bin/mkdir $TARGET
+
+ SOURCE_DEV=$(echo $CMDLINE | /usr/bin/tr ' ' '\n' | /bin/sed -n '/bootfrom=/s/.*=//p' | /usr/bin/tail -1)
+
+ LOOP_DEV=$(echo $SOURCE_DEV | /usr/bin/gawk -F/ '{ print $1 "/" $2 "/" $3 }')
+ ISO_PATH=$(echo $SOURCE_DEV | /bin/sed "s|$LOOP_DEV||g" )
+ case "$ISO_PATH" in /*.[iI][sS][oO]) ;; *) ISO_PATH="" ;; esac
+ LOOP_SOURCE=""
+
+ # load filesystems
+ # /GRML/sbin/modprobe reiserfs
+ /GRML/sbin/modprobe reiser4
+ /GRML/sbin/modprobe ntfs # BE CAREFUL! - Only mount it read only! - FF
+
+ if [ -n "$ISO_PATH" ]
+ then
+ LOOP_SOURCE="$TARGET.loop"
+ LOOP_SOURCE2="$LOOP_SOURCE"
+ TARGET_DEV="$LOOP_SOURCE$ISO_PATH"
+ /bin/mkdir $LOOP_SOURCE
+ /GRML/sbin/modprobe loop
+
+ /bin/mount -o ro $LOOP_DEV $LOOP_SOURCE || LOOP_SOURCE=""
+ /bin/mount -n -o loop $LOOP_SOURCE2$ISO_PATH $TARGET
+ else
+ TARGET_DEV="$SOURCE_DEV"
+ /bin/mount -n -o ro $SOURCE_DEV $TARGET
+ fi
+ if [ $? -ne 0 ]
+ then
+ [ -n "$LOOP_SOURCE" ] && /bin/umount $LOOP_SOURCE
+ echo -n "${CRE} ${RED}Accessing grml CD-ROM failed. ${MAGENTA}$TARGET_DEV${RED} is not mountable.${NORMAL}"
+ sleep 2
+ return 1
+ fi
+
+ if [ -f $TARGET/$GRML_DIR/$GRML_NAME ]
+ then
+ log_begin_msg "Accessing grml CD-ROM at ${MAGENTA}$TARGET_DEV${NORMAL}." ; echo $SUCCESS
+ else
+ echo -n "${CRE} ${RED}Accessing grml CD-ROM failed. Could not find $GRML_DIR/$GRML_NAME on ${MAGENTA}$TARGET_DEV${RED}.${NORMAL}"
+ [ -n "$LOOP_SOURCE" ] && /bin/umount $LOOP_SOURCE
+ umount $TARGET
+ sleep 2
+ return 1
+ fi
+ # remount the CD
+ remount_grml
+}
+
+copy_to()
+{
+ # preparations
+ /bin/mkdir $TARGET
+ COPY="$SOURCE/$GRML_DIR"
+
+ # look if we copy to hd or to ram
+ SIZE="$(/usr/bin/du -s $COPY | /usr/bin/gawk '{print int($1*1.1)}')"
+ test -n "$SIZE" || SIZE="800000"
+
+ case "$1" in
+ ram)
+ TARGET_DEV="/dev/shm"
+ TARGET_DEV_DESC="ramdisk"
+ FOUNDSPACE="$(/usr/bin/gawk '/MemTotal/{print $2}' /proc/meminfo)"
+ /bin/mount -n -t tmpfs -o size=${SIZE}k $TARGET_DEV $TARGET
+ ;;
+ hd)
+ TARGET_DEV=$(echo $CMDLINE | /usr/bin/tr ' ' '\n' | /bin/sed -n '/tohd=/s/.*=//p' | /usr/bin/tail -1)
+ TARGET_DEV_DESC="$TARGET_DEV"
+ # load filesystems
+ # /GRML/sbin/modprobe reiserfs
+ # /GRML/sbin/modprobe jbd
+ # /GRML/sbin/modprobe ext3
+ /GRML/sbin/modprobe reiser4
+ BUILTIN_FS="iso9660 ext3 ext2 reiserfs reiser4 vfat"
+ # we need to use mountit to prevent NTFS to be mounted!
+ if mountit $TARGET_DEV $TARGET "-o rw"
+ then
+ :
+ else
+ echo -n "${CRE} ${RED}Copying grml CD-ROM failed. ${MAGENTA}$TARGET_DEV_DESC${RED} is not mountable.${NORMAL}"
+ sleep 2
+ return 1
+ fi
+ # check for enough free space
+ USED_SPACE=0
+ [ -f $TARGET/$GRML_DIR/$GRML_NAME ] && USED_SPACE=$(/usr/bin/du -s $TARGET/$GRML_DIR/$GRML_NAME | /usr/bin/gawk '{ print $1 }')
+ FOUNDSPACE="$(/bin/df -k $TARGET | /usr/bin/tail -1 | /usr/bin/gawk '{ print $4+int('$USED_SPACE') }')"
+ ;;
+ *)
+ return 1
+ ;;
+ esac
+
+ # sanity check
+
+ if [ $FOUNDSPACE -lt $SIZE ]
+ then
+ echo -n "${CRE} ${RED}Copying grml CD-ROM failed. Not enough free space on ${MAGENTA}${TARGET_DEV_DESC}${RED}. Found: ${MAGENTA}${FOUNDSPACE}k${RED} Need: ${MAGENTA}${SIZE}k${RED} ${NORMAL}"
+ sleep 2
+ umount $TARGET
+ return 1
+ fi
+
+ # do the real copy
+
+ echo "${CRE} ${GREEN}Copying grml CD-ROM to ${MAGENTA}$TARGET_DEV_DESC${GREEN}... Please be patient. ${NORMAL}"
+ if [ -z "$use_cp" -a -x /usr/bin/rsync ]
+ then
+ # first cp the small files
+ /usr/bin/rsync -a --exclude="$GRML_DIR/$GRML_NAME" $COPY $TARGET # Copy grml to $TARGET
+ # then the big file with nice progress meter
+ [ -f $TARGET/$GRML_DIR/$GRML_NAME ] && /bin/rm -f $TARGET/$GRML_DIR/$GRML_NAME
+ /usr/bin/rsync -a --progress --include="$GRML_DIR/$GRML_NAME" --include="$GRML_DIR/" --exclude="*" $COPY $TARGET # Copy grml to $TARGET
+ #/usr/bin/rsync -avP $COPY $TARGET # Copy grml to $TARGET
+ else
+ /bin/cp -a -f $COPY $TARGET # Copy grml to $TARGET
+ fi
+ if [ $? -ne 0 ]
+ then
+ echo -n "${CRE} ${RED}Copying grml CD-ROM failed. ${MAGENTA}$TARGET_DEV_DESC${RED} possibly has not enough space left.${NORMAL}"
+ sleep 2
+ return 1
+ fi
+ # remount r/o
+ /bin/mount -n -o remount,ro $TARGET_DEV $TARGET
+ remount_grml
+}
+
+mount_grml /cdrom
+
+COPYTO=""
+BOOTFROM=""
+DO_REMOUNT=""
+REAL_TARGET=""
+UNIONFS=""
+
+case "$CMDLINE" in *toram*) DO_REMOUNT="yes"; COPYTO="ram"; ;; esac
+case "$CMDLINE" in *tohd=*) DO_REMOUNT="yes"; COPYTO="hd"; ;; esac
+case "$CMDLINE" in *bootfrom=*) DO_REMOUNT="yes"; BOOTFROM="yes" ;; esac
+
+# Remount later after copying/isoloading/driverloading?
+# pre-test if everything succeeded
+if test -n "$DO_REMOUNT" -a -n "$FOUND_GRML"
+then
+ # copy library cache
+ cat /GRML/etc/ld.so.cache > /etc/ld.so.cache
+ echo ""
+
+ SOURCE="/cdrom"
+ TARGET="/cdrom2"
+
+ # first test for possible hdboot/fromiso (which can be combined with toram / tohd)
+ if [ -n "$BOOTFROM" ]
+ then
+ boot_from
+ if [ $? -eq 0 ]
+ then
+ # set new source / target paths
+ REAL_TARGET="$TARGET"
+ SOURCE2="$LOOP_SOURCE"
+ SOURCE="/cdrom2"
+ TARGET="/cdrom3"
+ fi
+ fi
+ if [ -n "$COPYTO" ]
+ then
+ copy_to $COPYTO && REAL_TARGET="$TARGET"
+ fi
+fi
+
+# Final test if everything succeeded.
+if test -n "$FOUND_GRML"
+then
+# copy library cache
+cat /GRML/etc/ld.so.cache > /etc/ld.so.cache
+
+UNIONFS=""
+$INSMOD /modules/unionfs.ko 2>/dev/null && UNIONFS="yes"
+
+# Enable kernel messages
+echo "6" > /proc/sys/kernel/printk
+
+# Set paths
+log_begin_msg "Setting paths"
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:."
+export PATH
+
+# Debian weirdness
+/GRML/bin/cp -a /GRML/etc/alternatives /etc/ 2>/dev/null
+
+# Replace /sbin
+/GRML/bin/rm -f /sbin
+/GRML/bin/ln -sf /GRML/sbin /sbin
+
+# From here, we should have all essential commands available.
+hash -r
+
+# Did we remount the source media ?
+if test -n "$REAL_TARGET";
+then
+ /bin/mount -n --move $REAL_TARGET /cdrom # move it back and go on to normal boot
+fi
+
+# Clean up /etc/mtab (and - just in case - make a nice entry for looped ISO)
+egrep " /GRML | /cdrom " /proc/mounts 2>/dev/null | sed 's|/dev/loop0 /cdrom \(.*\) 0 0|'$LOOP_SOURCE$ISO_PATH' /cdrom/ \1,loop=/dev/loop0 0 0|g' >> /etc/mtab
+
+# Clean up /
+rm -rf /modules /static
+echo " $SUCCESS"
+
+# New in Kernel 2.4.x: tempfs with variable ramdisk size.
+# We check for available memory anyways and limit the ramdisks
+# to a reasonable size.
+FOUNDMEM="$(awk '/MemTotal/{print $2}' /proc/meminfo)"
+TOTALMEM="$(awk 'BEGIN{m=0};/MemFree|Cached/{m+=$2};END{print m}' /proc/meminfo)"
+
+# Be verbose
+log_begin_msg "Total memory found: $FOUNDMEM kB" ; echo " $SUCCESS"
+
+# Now we need to use a little intuition for finding a ramdisk size
+# that keeps us from running out of space, but still doesn't crash the
+# machine due to lack of Ram
+
+# Minimum size of additional ram partitions
+MINSIZE=20000
+# At least this much memory minus 30% should remain when home and var are full.
+MINLEFT=16000
+# Maximum ramdisk size
+MAXSIZE="$(expr $TOTALMEM - $MINLEFT)"
+# Default ramdisk size for ramdisk
+RAMSIZE="$(expr $TOTALMEM / 5)"
+RAMSIZE="$(expr $RAMSIZE \* 4)"
+
+# FIXME
+RAMSIZE="$(expr $RAMSIZE - 17400)"
+
+# Create additional dynamic ramdisk.
+test -z "$RAMSIZE" -o "$RAMSIZE" -lt "$MINSIZE" && RAMSIZE="$MINSIZE"
+mkdir -p /ramdisk
+# tmpfs/varsize version, can use swap
+log_begin_msg "Creating /ramdisk (dynamic size=${RAMSIZE}k) on shared memory"
+# We need /bin/mount here for the -o size= option
+/bin/mount -t tmpfs -o "size=${RAMSIZE}k" /ramdisk /ramdisk && echo "$SUCCESS"
+mkdir -p /ramdisk/tmp /ramdisk/home/grml && chmod 1777 /ramdisk/tmp && chown grml.grml /ramdisk/home/grml && ln -snf /ramdisk/home /home && mv /tmp /tmp.old && ln -s /ramdisk/tmp /tmp && rm -rf /tmp.old
+#/bin/mount -t tmpfs -o "size=${RAMSIZE}k" /ramdisk /ramdisk && mkdir -p /ramdisk/home /ramdisk/var && ln -s /ramdisk/home /ramdisk/var /
+
+stage=3
+rundebugshell
+# unionfs
+log_begin_msg "Creating unionfs and symlinks on ramdisk"
+mkdir -p /UNIONFS
+if test -n "$UNIONFS" && /bin/mount -t unionfs -o noatime,dirs=/ramdisk=rw:/GRML=ro /UNIONFS /UNIONFS; then
+ # We now have unionfs, copy some data from the initial ramdisk first
+ cp -a /etc/fstab /etc/auto.mnt /etc/filesystems /etc/mtab /UNIONFS/etc/
+ for i in bin boot etc sbin var lib opt root usr; do # Move directories to unionfs
+ if test -d /$i; then
+ mv /$i /$i.old && \
+ /GRML/lib/ld-linux.so.2 --library-path /GRML/lib /GRML/bin/ln -snf /UNIONFS/$i /$i && \
+ rm -rf /$i.old
+ else
+ ln -snf /UNIONFS/$i /$i
+ fi
+ done
+ #echo "${GREEN}done${NORMAL}"
+ echo " $SUCCESS"
+ log_begin_msg "Merging read-only system with read-writeable /ramdisk."
+ for i in $(cd /UNIONFS; echo *); do # Create links for new stuff on /UNIONFS
+ test "$i" = "home" -o "$i" = "tmp" && continue
+ test -L "/$i" || test -d "/$i" || test -f "/$i" || ln -snf "/UNIONFS/$i" /$i
+ done && echo " $SUCCESS" || echo " $FAILED"
+else
+ log_failure_msg "ERROR: CANNOT UNITE READ-ONLY MEDIA AND INITIAL RAMDISK!" ; echo "$FAILED"
+ NOUNIONFS="yes"
+ /GRML/sbin/halt -f -n
+fi
+
+chown grml.grml /home/grml
+chmod 1777 /var/tmp
+# Create empty utmp and wtmp
+:> /var/run/utmp
+:> /var/run/wtmp
+
+## Make SURE that these are files, not links!
+rm -rf /etc/ftpusers /etc/passwd /etc/shadow /etc/group \
+ /etc/ppp /etc/isdn /etc/ssh /etc/ioctl.save \
+ /etc/inittab /etc/network /etc/sudoers \
+ /etc/init /etc/localtime /etc/dhcpc /etc/pnm2ppa.conf 2>/dev/null
+cp -a /GRML/etc/ftpusers /GRML/etc/passwd /GRML/etc/shadow /GRML/etc/group \
+ /GRML/etc/ppp /GRML/etc/isdn /GRML/etc/ssh \
+ /GRML/etc/inittab /GRML/etc/network /GRML/etc/sudoers \
+ /GRML/sbin/init /GRML/etc/dhcpc /etc/ 2>/dev/null
+
+# Extremely important, init crashes on shutdown if this is only a link
+:> /etc/ioctl.save
+:> /etc/pnm2ppa.conf
+# Must exist for samba to work
+[ -d /var/lib/samba ] && :> /var/lib/samba/unexpected.tdb
+# Diet libc bug workaround
+# cp -f /GRML/etc/localtime /etc/localtime
+# echo "${BLUE}Done.${NORMAL}"
+
+# Now tell kernel where the real modprobe lives
+echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
+
+# Change root device from /dev/fd0 to /dev/ram0
+echo "0x100" > /proc/sys/kernel/real-root-dev
+
+# umount /sys (remount in grml-autoconfig)
+umount /sys
+
+stage=4
+rundebugshell
+# Give control to the init process.
+log_begin_msg "Starting init process."
+rm -f /linuxrc
+exit 0
+
+else
+echo "${CRE}${RED}Can't find grml filesystem, sorry.${NORMAL}"
+echo "${RED}Dropping you to the busybox shell.${NORMAL}"
+echo "${RED}Press reset button to quit.${NORMAL}"
+echo ""
+#echo "Additional builtin commands avaliable:"
+#echo " cat mount umount"
+#echo " insmod rmmod lsmod"
+#echo ""
+PS1="grml# "
+export PS1
+echo "6" > /proc/sys/kernel/printk
+# Allow signals
+trap 1 2 3 15
+exec /static/sh
+fi
--- /dev/null
+#!/bin/sh
+# "modtest"
+#
+#
+# written by Michael Gebetsroither (michael.geb@gmx.at)
+#
+# 11.04.2005 - initial release (Michael Gebetsroither)
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, look at
+# http://www.gnu.org/licenses/gpl.txt, or write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+# MA 02111-1307, USA.
+
+TMP=`mktemp`
+
+MODULES_=$(awk '/ethernet/{print $3}' /lib/discover/pci.lst |sort |uniq |xargs)
+MODULES_DEP_="$1"
+
+if [[ "$1" == "" ]]; then
+ echo "you have to give me the path to your modules.dep" >&2
+ exit 1
+fi
+
+#for i in $MODULES_; do
+# awk -F: '{if($1~/'"$i"'/) {print $1}}' /lib/modules/$KERNEL_VERSION_/modules.dep
+#done > $TMP
+
+for i in $MODULES_; do
+ #awk -F: '{if($1~/'"$i"'/) {print $2}}' /lib/modules/$KERNEL_VERSION_/modules.dep
+ tmp_=`awk -F: '{if($1~/'"$i".ko'/) {print $0}}' $MODULES_DEP_`
+ echo "1-${tmp_%%:*}"
+ echo "${tmp_#*:}" |xargs -n1 echo |sed 's/://'
+done \
+| sort | uniq | while read module relax; do
+ if [ -n "$module" ]; then
+ #echo "cp $module" "INITRD/modules/net/00_${module##*/}"
+ echo -n "$module" >> $TMP
+ echo -n "$relax" >> $TMP
+ echo >> $TMP
+ fi
+done
+
+#for i in $MODULES_; do
+# tmp_=`awk -F: '{if($1~/'"$i".ko'/) {print $0}}' /lib/modules/$KERNEL_VERSION_/modules.dep`
+# echo first-match-$i--${tmp_%%:*}
+# echo ${tmp_#*:} |xargs -n1 echo
+# tmp_=''
+#done \
+#|while read module relax; do
+# echo "module=\"$module\" relax=\"$relax\""
+#done
+
+cat $TMP |sort |uniq
+rm $TMP
--- /dev/null
+#!/bin/sh
+#
+# nfs-kernel-server
+# This shell script takes care of starting and stopping
+# the kernel-mode NFS server.
+#
+# chkconfig: 345 60 20
+# description: NFS is a popular protocol for file sharing across TCP/IP \
+# networks. This service provides NFS server functionality, \
+# which is configured via the /etc/exports file.
+#
+
+set -e
+
+# What is this?
+DESC="NFS kernel daemon"
+PREFIX=/usr
+
+# Exit if required binaries are missing.
+[ -x $PREFIX/sbin/rpc.nfsd ] || exit 0
+[ -x $PREFIX/sbin/rpc.mountd ] || exit 0
+[ -x $PREFIX/sbin/exportfs ] || exit 0
+[ -x $PREFIX/sbin/rpc.svcgssd ] || exit 0
+
+# Read config
+DEFAULTFILE=/etc/default/nfs-kernel-server
+RPCNFSDCOUNT=8
+RPCMOUNTDOPTS=
+NEED_SVCGSSD=yes
+RPCGSSDOPTS=
+RPCSVCGSSDOPTS=
+PROCNFSD_MOUNTPOINT=/proc/fs/nfsd
+if [ -f $DEFAULTFILE ]; then
+ . $DEFAULTFILE
+fi
+
+do_modprobe() {
+ modprobe -q "$1" || true
+}
+
+do_mount() {
+ if ! grep -E -qs "$1\$" /proc/filesystems
+ then
+ return 1
+ fi
+ if ! mountpoint -q "$2"
+ then
+ mount -t "$1" "$1" "$2"
+ return
+ fi
+ return 0
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ cd / # daemons should have root dir as cwd
+ # FIXME if grep -q '^/' /etc/exports
+ if [ -f /etc/exports ]
+ then
+ do_modprobe nfsd
+ do_mount nfsd $PROCNFSD_MOUNTPOINT || NEED_SVCGSSD=no
+ printf "Exporting directories for $DESC..."
+ $PREFIX/sbin/exportfs -r
+ echo "done."
+
+ printf "Starting $DESC:"
+ if [ "$NEED_SVCGSSD" = yes ]
+ then
+ printf " svcgssd"
+ start-stop-daemon --start --quiet \
+ --make-pidfile --pidfile /var/run/rpc.svcgssd.pid \
+ --exec $PREFIX/sbin/rpc.svcgssd -- $RPCSVCGSSDOPTS
+ fi
+
+ printf " nfsd"
+ start-stop-daemon --start --quiet \
+ --exec $PREFIX/sbin/rpc.nfsd -- $RPCNFSDCOUNT
+
+ printf " mountd"
+
+ # make sure 127.0.0.1 is a valid source for requests
+ ClearAddr=
+ if [ -f /proc/net/rpc/auth.unix.ip/channel ]
+ then
+ fgrep -qs 127.0.0.1 /proc/net/rpc/auth.unix.ip/content || {
+ echo "nfsd 127.0.0.1 2147483647 localhost" >/proc/net/rpc/auth.unix.ip/channel
+ ClearAddr=yes
+ }
+ fi
+
+ $PREFIX/bin/rpcinfo -u localhost nfs 3 >/dev/null 2>&1 ||
+ RPCMOUNTDOPTS="$RPCMOUNTDOPTS --no-nfs-version 3"
+
+ [ -z "$ClearAddr" ] || echo "nfsd 127.0.0.1 1" >/proc/net/rpc/auth.unix.ip/channel
+
+ start-stop-daemon --start --quiet \
+ --exec $PREFIX/sbin/rpc.mountd -- $RPCMOUNTDOPTS
+ echo "."
+ else
+ echo "Not starting $DESC: No exports."
+ fi
+ ;;
+
+ stop)
+ printf "Stopping $DESC: mountd"
+ start-stop-daemon --stop --oknodo --quiet \
+ --name rpc.mountd --user 0
+ if [ "$NEED_SVCGSSD" = yes ]
+ then
+ printf " svcgssd"
+ start-stop-daemon --stop --oknodo --quiet \
+ --name rpc.svcgssd --user 0
+ rm -f /var/run/rpc.svcgssd.pid
+ fi
+ printf " nfsd"
+ start-stop-daemon --stop --oknodo --quiet \
+ --name nfsd --user 0 --signal 2
+ echo "."
+
+ printf "Unexporting directories for $DESC..."
+ $PREFIX/sbin/exportfs -au
+ echo "done."
+ ;;
+
+ reload | force-reload)
+ printf "Re-exporting directories for $DESC..."
+ $PREFIX/sbin/exportfs -r
+ echo "done."
+ ;;
+
+ restart)
+ $0 stop
+ sleep 1
+ $0 start
+ ;;
+
+ *)
+ echo "Usage: nfs-kernel-server {start|stop|reload|force-reload|restart}"
+ exit 1
+ ;;
+esac
+
+exit 0
--- /dev/null
+#!/static/ash
+# recreate the old dir structures
+
+if [ -e /mylib -o -e /myusr ]; then
+ return 0
+else
+ mv /lib /mylib
+ mv /usr /myusr
+ mv /lib~ /lib
+ mv /usr~ /usr
+fi
+
--- /dev/null
+#!/bin/sh i like syntaxhighlighting ;)
+# this is a shellscript fragment
+# !!! DO NOT EDIT THIS FILE !!!
+# only if you know what you are doing...
+
+###
+## shared config vars
+###
+
+# language
+LANG_=en
+
+# main path from terminalserver
+PATH_="/etc/grml/terminalserver"
+
+# config file produced from configuration program
+CONF_FILE_="$PATH_/terminalserver.conf"
+
+# user editable config
+CONFIG_="$PATH_/config"
+
+# 'data dir' from terminalserver
+USR_SHARE_="/usr/share/grml-terminalserver"
+
+# defaults for vars in terminalserver.conf
+DEFAULT_CONFIG_="$USR_SHARE_/default_config"
+
+# title for dialog
+BACK_TITLE_="GRML TERMINAL-SERVER CONFIGURATION"
+
+# program to use for user questions (x)dialog
+DIALOG_="dialog"
+
+
+###
+## grml-terminalserver
+###
+
+# program to create $CONF_FILE_
+CONFIG_PROG_="/usr/sbin/grml-terminalserver-config"
+
+# vars for dhcpd
+DHCPD_BIN_="/usr/sbin/dhcpd3"
+DHCPD_CONFIG_FILE_="$PATH_/dhcpd.conf"
+DHCPD_PID_=/var/run/dhcpd.pid
+
+# vars for tftpd
+TFTPD_BIN_="/usr/sbin/in.tftpd"
+TFTPD_DATA_DIR_="/var/lib/tftpboot"
+TFTPD_PID_="/var/run/grml-tftpd.pid"
+
+
+###
+## grml-terminalserver-config
+###
+
+# the dir where the templates for the configuration files are stored
+TEMPLATE_CONFIG_DIR_="$USR_SHARE_/templates"
+
+# this file provides which nic's grub is able to boot from and sane defaults
+GRUB_NIC_CONF_="$USR_SHARE_/grub_cards"
+
+# this file is provided by another debian package (grml-terminalserver-data)
+GRUB_SOURCE_="$USR_SHARE_/grub-0.96.tar.gz"
+
+# maximum initrd size
+MAX_INITRD_SIZE_=16000
+
+# path to uclibc
+UCLIBC_PATH_="/usr/i386-uclibc-linux/lib"
+
+# this is where the terminalserver-config creates the initrd
+INITRD_="$PATH_/mini-root"
+
+# only for this cards (kernel module names of drivers) drivers are copied into
+# the initrd
+CARDS_DETECTED_BY_DISCOVER="$PATH_/discover_netcards"
--- /dev/null
+#!/bin/sh i like colors :)
+#
+# the following variables are available in the template:
+#
+# $INTERFACE_ (interface for the terminalserver)
+# $IP_ (ip for the terminalserver to bind)
+# $NETMASK_ (network mask)
+# $GW_ (gateway)
+# $NAMESERVERS_ (nameservers for the nodes)
+# $IPRANGE_FROM_ (user configured iprange, first ip)
+# $IPRANGE_TO_ (user configured iprange, last ip)
+# $NETWORK_ (first ip in this subnet)
+# $OPTIONS_ (options for grml-terminalserver)
+# $BOOT_ARGS_ (boot arguments for the nodes)
+#
+# NOTE:
+# templates are shellscript fragments and will be sourced from the
+# terminalserver
+#
+# GLOBAL_README_END
+
+#
+# this is the template to create the config file for the dhcpd server
+#
+
+date_=`execute date warn`
+
+cat >"$DHCPD_CONFIG_FILE_" <<EOT
+# ${DHCPD_CONFIG_FILE_##/*/} for GRML terminalserver
+# created on $date_
+
+# global settings
+allow booting;
+allow bootp;
+#option option-150 code 150 = text ;
+#option T150 code 150 = string;
+default-lease-time 600;
+max-lease-time 7200;
+
+subnet ${IP_%.*}.0 netmask $NETMASK_ {
+ next-server $IP_;
+ if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "etherboot.nbi"; }
+ else { filename "pxelinux.0"; }
+# option subnet-mask $NETMASK_;
+ range $IPRANGE_FROM_ $IPRANGE_TO_;
+# option T150 "/menu.lst";
+# option option-150 "(nd)/menu.lst";
+}
+
+EOT
+
--- /dev/null
+#!/bin/sh i like colors :)
+#
+# the following variables are available in the template:
+#
+# $INTERFACE_ (interface for the terminalserver)
+# $IP_ (ip for the terminalserver to bind)
+# $NETMASK_ (network mask)
+# $GW_ (gateway)
+# $NAMESERVERS_ (nameservers for the nodes)
+# $IPRANGE_FROM_ (user configured iprange, first ip)
+# $IPRANGE_TO_ (user configured iprange, last ip)
+# $NETWORK_ (first ip in this subnet)
+# $OPTIONS_ (options for grml-terminalserver)
+# $BOOT_ARGS_ (boot arguments for the nodes)
+#
+# NOTE:
+# templates are shellscript fragments and will be sourced from the
+# terminalserver
+#
+# GLOBAL_README_END
+
+
+# default boot arguments used for both grub and pxelinux
+default_boot_args_="ramdisk_size=16384 root=/dev/ram0 rw \
+init=/etc/init nfsdir=$IP_:$MOUNT_POINT_ nodhcp noprompt noeject \
+apm=power-off nomce"
+
+# special boot arguments required by grub
+grub_def_boot_args_="/linux26 $default_boot_args_"
+
+# special boot arguments required by pxelinux
+pxe_def_boot_args_="$default_boot_args_ initrd=minirt26.gz"
+
+# default arguments for framebuffer console
+def_fb_args_="video=vesafb:ypan,1024x768-16@60"
+no_fb_args_="video=ofonly"
+
+###
+## create grub config
+###
+
+cat >"$TFTPD_DATA_DIR_/menu.lst" <<EOT
+default=0
+timeout=10
+title GRML
+ root (nd)
+ kernel $grub_def_boot_args_ $def_fb_args_ $BOOT_ARGS_
+ initrd /minirt26.gz
+
+title GRML no framebuffer
+ root (nd)
+ kernel $grub_def_boot_args_ $no_fb_args_ $BOOT_ARGS_
+
+title GRML small
+ root (nd)
+ kernel $grub_def_boot_args_ small $def_fb_args_ $BOOT_ARGS_
+ initrd /minirt26.gz
+
+title GRML small nofb
+ root (nd)
+ kernel $grub_def_boot_args_ small $no_fb_args_ $BOOT_ARGS_
+ initrd /minirt26.gz
+
+title GRML debuginit
+ root (nd)
+ kernel $grub_def_boot_args_ debuginitrd $def_fb_args_ $BOOT_ARGS_
+ initrd /minirt26.gz
+
+title GRML debuginit nofb
+ root (nd)
+ kernel $grub_def_boot_args_ debuginitrd $no_fb_args_ $BOOT_ARGS_
+ initrd /minirt26.gz
+
+title GRML rescue
+ root (nd)
+ kernel $grub_def_boot_args_ $no_fb_args_
+ initrd /minirt26.gz
+
+title memtest
+ root (nd)
+ kernel /memtest
+
+title Reload config
+ configfile (nd)/menu.lst
+EOT
+
+ret_=$?
+
+
+###
+## create pxelinux config
+###
+
+cat >"$TFTPD_DATA_DIR_/pxelinux.cfg/default" <<EOT
+DEFAULT linux26
+APPEND $pxe_def_boot_args_ $def_fb_args_ $BOOT_ARGS_
+TIMEOUT 100
+PROMPT 1
+DISPLAY boot.msg
+F1 boot.msg
+LABEL grml
+KERNEL linux26
+APPEND $pxe_def_boot_args_ $def_fb_args_ $BOOT_ARGS_
+LABEL grmlnofb
+KERNEL linux26
+APPEND $pxe_def_boot_args_ video=nofb $BOOT_ARGS_
+LABEL small
+KERNEL linux26
+APPEND $pxe_def_boot_args_ small $def_fb_args_ $BOOT_ARGS_
+LABEL smallnofb
+KERNEL linux26
+APPEND $pxe_def_boot_args_ small video=nofb $BOOT_ARGS_
+LABEL debuginit
+KERNEL linux26
+APPEND $pxe_def_boot_args_ debuginit $def_fb_args_ $BOOT_ARGS_
+LABEL debuginit
+KERNEL linux26
+APPEND $pxe_def_boot_args_ debuginit video=nofb $BOOT_ARGS_
+LABEL resuce
+KERNEL linux26
+APPEND $pxe_def_boot_args_ video=nofb
+LABEL memtest
+KERNEL memtest
+APPEND initrd=
+
+EOT
+
+let ret_=$ret_+$?
+return $ret_
--- /dev/null
+#!/bin/sh i like colors :)
+#
+# the following variables are available in the template:
+#
+# $INTERFACE_ (interface for the terminalserver)
+# $IP_ (ip for the terminalserver to bind)
+# $NETMASK_ (network mask)
+# $GW_ (gateway)
+# $NAMESERVERS_ (nameservers for the nodes)
+# $IPRANGE_FROM_ (user configured iprange, first ip)
+# $IPRANGE_TO_ (user configured iprange, last ip)
+# $NETWORK_ (first ip in this subnet)
+# $OPTIONS_ (options for grml-terminalserver)
+# $BOOT_ARGS_ (boot arguments for the nodes)
+#
+# NOTE:
+# templates are shellscript fragments and will be sourced from the
+# terminalserver
+#
+# GLOBAL_README_END
--- /dev/null
+#!/static/sh
+
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+
+RESOLV_CONF="/etc/resolv.conf"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+case "$1" in
+ deconfig)
+ /sbin/ifconfig $interface 0.0.0.0
+ ;;
+
+ renew|bound)
+ /sbin/ifconfig $interface $ip $BROADCAST $NETMASK
+
+ if [ -n "$router" ] ; then
+ echo "deleting routers"
+ while route del default gw 0.0.0.0 dev $interface ; do
+ :
+ done
+
+ for i in $router ; do
+ route add default gw $i dev $interface
+ done
+ fi
+
+ echo -n > $RESOLV_CONF
+ [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
+ for i in $dns ; do
+ echo adding dns $i
+ echo nameserver $i >> $RESOLV_CONF
+ done
+ ;;
+esac
+
+exit 0
projects / grml-terminalserver.git / commitdiff