# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Don Jul 12 01:20:47 CEST 2007 [mika]
+# Latest change: Die Sep 04 01:44:19 CEST 2007 [mika]
################################################################################
+# make sure /tmp is writeable {{{
+ if ! [ -w /tmp ] ; then
+ echo 'Fatal: /tmp is not writeable. Can not resume therefore, sorry.' >&2
+ exit 1
+ fi
+# }}}
+
# debugging {{{
# usage: DEBUG=1 grml-x ..... 2>/tmp/grml-x-debug.log
if [[ $DEBUG -gt 0 ]]; then
Usage: $PROGRAMNAME
$PROGRAMNAME [-options] windowmanager
-Examples:
+Usage examples:
$PROGRAMNAME wmii
- $PROGRAMNAME pekwm
$PROGRAMNAME fluxbox
+ $PROGRAMNAME openbox
$PROGRAMNAME -force -nostart fluxbox
$PROGRAMNAME -nosynaptics fluxbox
$PROGRAMNAME -nosync fluxbox
$PROGRAMNAME -noddc wmii
- $PROGRAMNAME -module radeon -mode 1024x768 -vsync 60 wmi
- XINITRC=~/.xinitrc $PROGRAMNAME ion
- $PROGRAMNAME -display 8 wmii
+ $PROGRAMNAME -xinerama -composite wmii
+ $PROGRAMNAME -module radeon -mode 1024x768 -vsync 60 openbox
+ XINITRC=~/.xinitrc $PROGRAMNAME openbox
+ $PROGRAMNAME -display 8 openbox
More information on grml-x can be found in the manual page: man grml-x
Option for $fg[yellow]Xinerama$fg[green] found, please use xrandr inside X.org for your further configuration!
Trying to identify monitors now..."
- # Currently we only know that it works with current intel driver,
- # so inform user about that:
- if [[ "$MODULE" != "intel" ]] ; then
- print "$fg[red]
-
-Warning: using a non-intel driver - trying Xinerama setup anyway.
-If it worked please contact grml developers providing information
-about your setup so we can adjust grml-x according!
-
- -> http://grml.org/contact/
-
-Sleeping for 10 seconds now... Will continue then...
-Just press Ctrl-C to cancel operation.
-"
-# sleep 10 # FIXME
- fi
-
# make sure we have information from 2 monitors:
# - first one from 'hwinfo --monitor' => $MONITORINFO
# - second one from 'hwinfo --framebuffer' => $FRAMEBUFFER
Fatal: could not identify two monitors - no chance to
set up multihead using Xinerama - sorry. :-(
-Please run grml-x without the -xinerama option and contact
-grml developers if you have any further useful information.
- => http://grml.org/bugs/
+Please run grml-x without the -xinerama option to start
+X anyway (dropping support for Xinerama of course) and
+contact grml developers if you have any further useful
+information. => http://grml.org/bugs/
"
bailout 10
fi
"
bailout 11
else
+ # Currently we only know that it works with current intel driver,
+ # so inform user about that:
+ if [[ "$MODULE" != "intel" ]] ; then
+ print "$fg[red]
+
+Warning: using a non-intel driver - trying Xinerama setup anyway.
+If it worked please contact grml developers providing information
+about your setup so we can adjust grml-x according!
+
+ -> http://grml.org/contact/
+
+Sleeping for 10 seconds now... Will continue then...
+Just press Ctrl-C to cancel operation.
+"
+ sleep 10
+ fi
+
# now calculate Virtual size for use with Xinerama
HORIZ_RES1="$(grep 'Max. Resolution:' $MONITORINFO | sed 's/ Max\. Resolution: \(.*\)x\(.*\)/\1/')"
VERIZ_RES1="$(grep 'Max. Resolution:' $MONITORINFO | sed 's/ Max\. Resolution: \(.*\)x\(.*\)/\2/')"
+ # it might happen that we don't have a Max Resolution in hwinfo output :-/
+ # fall back to a generic value then...
+ # TODO: check out how to get resolution of external monitor from console
+ if [ -z "$HORIZ_RES1" ] ; then
+ HORIZ_RES1="1024"
+ VERIZ_RES1="768"
+ fi
- HORIZ_RES2="$(echo $FRAMEBUFFER | sed 's/ Mode 0x.*: \(.*\)x.*/\1/')"
- VERIZ_RES2="$(echo $FRAMEBUFFER | sed 's/ Mode 0x.*x\(.*\) (.*/\1/')"
+ # get maximum of output
+ HORIZ_RES2="$(echo $FRAMEBUFFER | grep 'Mode 0x' | sed 's/ Mode 0x.*: \(.*\)x.*/\1/'| sort -u | head -1)"
+ VERIZ_RES2="$(echo $FRAMEBUFFER | grep 'Mode 0x' | sed 's/ Mode 0x.*x\(.*\) (.*/\1/' | sort -u | head -1)"
- if [ -n "$HORIZ_RES1" -a -n "$VERIZ_RES1" -a -n "$HORIZ_RES2" ] ; then
- if [ $(echo $VERIZ_RES1 - $VERIZ_RES2 | bc -l) -eq 0 ] ; then
+ if [ -n "$HORIZ_RES1" -a -n "$VERIZ_RES1" -a -n "$HORIZ_RES2" -a -n "$VERIZ_RES2" ] ; then
+ if [ "$(echo $VERIZ_RES1" - "$VERIZ_RES2 | bc -l)" -eq 0 ] ; then
VERIZ_RESULT="$VERIZ_RES1"
elif [ "$VERIZ_RES1" -gt "$VERIZ_RES2" ] ; then
VERIZ_RESULT="$VERIZ_RES1"
# important: keep newline for appropriate placing below $MODES!
if [ -n "$HORIZ_RESULT" ] ; then
VIRTUAL="
- Virtual $HORIZ_RESULT $VERIZ_RES1"
+ Virtual $HORIZ_RESULT $VERIZ_RES1"
fi
fi
fi
sync()
{
[ -r "$MONITORINFO" ] || monitor # get monitor settings
+ [ -r "$MONITORINFO" ] || bailout 1
vsyncval=$(awk '/Vert. Sync Range:/{print $4}' $MONITORINFO | sed 's/-/.0 - / ; s/$/.0/' | head -1)
hsyncval=$(awk '/Hor. Sync Range:/{print $4}' $MONITORINFO | sed 's/-/.0 - / ; s/$/.0/' | head -1)
if [ -z $vsyncval ] ; then
if grep -q 'Device:.*Synaptics' "$MOUSEINFO" ; then
if [[ "$SYNAPTICS" == "yes" ]] ; then # check for '-nosynaptics'-option
MOUSEDRIVER='synaptics'
- SYNMOUSE='InputDevice "Synaptics" "AlwaysCore"'
+ SYNMOUSE='InputDevice "Synaptics" # "AlwaysCore"'
SYNMOUSEDETAIL="
Section \"InputDevice\"
Driver \"synaptics\"
if grep -q 'Device:.*ALPS' "$MOUSEINFO" ; then
if [[ "$SYNAPTICS" == "yes" ]] ; then # check for '-nosynaptics'-option
MOUSEDRIVER='synaptics'
- SYNMOUSE='InputDevice "Synaptics" "AlwaysCore"'
+ SYNMOUSE='InputDevice "Synaptics" # "AlwaysCore"'
SYNMOUSEDETAIL="
Section \"InputDevice\"
Driver \"synaptics\"
Option \"MaxSpeed\" \"2.00\"
Option \"AccelFactor\" \"0.030\"
Option \"UpDownScrolling\" \"1\"
- Option \"EmulateMiddleButtonTime\" \"75\"
+ Option \"EmulateMidButtonTime\" \"75\"
Option \"CircularScrolling\" \"1\"
Option \"CircScrollDelta\" \"0.1\"
Option \"CircScrollTrigger\" \"8\"
if grep -q 'Device:.*Serial' "$MOUSEINFO" ; then
SERIAL='yes'
SERMOUSE='InputDevice "Serial Mouse" "CorePointer"'
- SERMOUSEDETAIL="Section \"InputDevice\"
+ SERMOUSEDETAIL="
+Section \"InputDevice\"
Identifier \"Serial Mouse\"
Driver \"mouse\"
Option \"Device\" \"/dev/ttyS0\"
if [ -n "$USE_PS2" ] ; then
PS2='yes'
PS2MOUSE='InputDevice "PS/2 Mouse" "CorePointer"'
- PS2MOUSEDETAIL="Section \"InputDevice\"
+ PS2MOUSEDETAIL="
+Section \"InputDevice\"
Identifier \"PS/2 Mouse\"
Driver \"mouse\"
Option \"Device\" \"/dev/input/mice\"
PS2MOUSEDETAIL=''
fi
- EVDEV_MOUSE="# Section \"InputDevice\"
+ EVDEV_MOUSE="
+# Section \"InputDevice\"
# Identifier \"Generic Mouse\"
# Driver \"evdev\"
# Option \"Device\" \"/dev/input/mice\"
writehwinfo
# monitor stuff
+ [ -r "$HWINFO_TMP" ] || bailout 1
MONITOR=$(awk '/monitor.1:/{print $3}' $HWINFO_TMP)
[[ $MONITOR != 'ddc' ]] && NODDC=yes
{
if ! [ -x $(which hwinfo) ] ; then
print "$bg[black]$fg[red]${bold_color}Error: hwinfo not found in path.${reset_color}
-Note: run 'apt-get install hwinfo' on systems running debian.
+Note: run 'aptitude install hwinfo' on systems running debian.
Exiting.${reset_color}"
exit -1
fi
# /usr/share/doc/xserver-xorg/ and
# http://wiki.x.org/wiki/Home and
# http://ftp.x.org/pub/X11R7.0/doc/html/index.html for information on Xorg
+#
# Refer to the xorg.conf man page and to
# http://ftp.x.org/pub/X11R7.0/doc/html/xorg.conf.5.html
# for details about the format of this file.
#
+# See http://wiki.debian.org/XStrikeForce/FAQ for information
+# regarding Xorg packages within Debian.
+#
# If you would like this file to be automatically reconfigured by debian,
# run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
-# Modules - see /usr/X11R6/lib/modules/fonts and /usr/X11R6/lib/modules/extensions
+# Modules - see /usr/lib/xorg/modules/fonts and /usr/lib/xorg/modules/extensions
Section "Module"
Load "dbe" # double buffer extension
Load "dri" # direct rendering
Load "extmod" # some commonly used server extensions (e.g. shape extension)
Load "record" # recording extension
Load "evdev" # generic input handling driver on Linux
+ Load "xtrap" # X Trap extension
# Load "vbe" # Vesa BIOS Extension
# Load "i2c" # I2C bus
# Load "int10" # initialize graphics cards via int10 call to the BIOS
# EndSection
# More information: http://ftp.x.org/pub/X11R7.0/doc/html/mouse.html
-$USBMOUSEDETAIL
-$PS2MOUSEDETAIL
-$SERMOUSEDETAIL
-$SYNMOUSEDETAIL
-$EVDEV_MOUSE
+${USBMOUSEDETAIL}${PS2MOUSEDETAIL}${SERMOUSEDETAIL}${SYNMOUSEDETAIL}${EVDEV_MOUSE}
Section "Monitor"
Identifier "Monitor0"
# ModelName "Old Monitor (no DDC)"
get-edid | parse-edid
Do you want to go the debian way of life? Run:
- apt-get install x-window-system-core read-edid mdetect hwinfo xdebconfigurator
- dpkg-reconfigure x-window-system-core (or xserver-xorg depending on your system)
+ aptitude install xorg read-edid mdetect hwinfo xdebconfigurator
+ dpkg-reconfigure -phigh xserver-xorg
Problems with the module used for X? Try to load another one or
fall back to module vesa:
# xinitrc {{{
if ! [ -x "$(which $WINDOWMANAGER)" ] ; then
- print "$bg[black]$fg[red]${bold_color}Fatal: windowmanager $fg[blue]$WINDOWMANAGER$fg[red] not executable, startx won' work.${reset_color}">&2
+ print "$bg[black]$fg[red]${bold_color}Fatal: windowmanager $fg[blue]$WINDOWMANAGER$fg[red] not executable, startx will not work.${reset_color}">&2
bailout
fi
if [ -w "$XINITRC" ] ; then
projects / grml-x.git / blobdiff