--- /dev/null
+#!/bin/bash
+# Filename: grml-network
+# Purpose: configuration script for network
+# Authors: Klaus Knopper 2002, Niall Walsh + Stefan Lippers-Hollmann 2005, Michael Prokop <mika@grml.org>, Marcel Wichern <marcel@grml.org>
+# Bug-Reports: see http://grml.org/bugs/
+# License: This file is licensed under the GPL v2.
+# Latest change: Mon Apr 17 21:48:36 CEST 2006 [mika]
+################################################################################
+# Changes have been merged from Kanotix's netcardconfig taken from
+# http://kanotix.com/files/debian/pool/main/n/netcardconfig-kanotix/
+################################################################################
+
+PATH="/bin:/sbin:/usr/bin:/usr/sbin"
+export PATH
+
+# get root
+if [ $UID != 0 ]; then
+ echo Error: become root before starting $0 >&2
+ exit 100
+fi
+
+TMP=$(mktemp)
+WPATMP=$(mktemp)
+
+bailout() {
+ rm -f "$TMP"
+ rm -f "$WPATMP"
+ exit $1
+}
+
+# This function produces the IWOURLINE for interfaces
+writeiwline() {
+ IWOURLINE=""
+ if [ -n "$NWID" ]; then
+ IWOURLINE="$IWOURLINE wireless-nwid $NWID\n"
+ fi
+
+ if [ -n "$MODE" ]; then
+ IWOURLINE="$IWOURLINE wireless-mode $MODE\n"
+ fi
+
+ if [ -n "$CHANNEL" ]; then
+ IWOURLINE="$IWOURLINE wireless-channel $CHANNEL\n"
+ fi
+
+ if [ -n "$FREQ" ]; then
+ IWOURLINE="$IWOURLINE wireless-freq $FREQ\n"
+ fi
+
+ if [ -n "$KEY" ]; then
+ if [ "$PUBKEY" -eq 1 ]; then
+ # Store the key in interfaces in wireless-key
+ IWOURLINE="$IWOURLINE wireless-key $KEY\n"
+ else
+ # Store the key in /etc/network/wep.$DV which is root readable only
+ # Use pre-up in interfaces to read and set it
+ echo "$KEY" > /etc/network/wep.$DV && chmod 600 /etc/network/wep.$DV && IWOURLINE="$IWOURLINE pre-up KEY=\$(cat /etc/network/wep.$DV) && iwconfig $DV key \$KEY\n"
+ fi
+ fi
+
+ [ -d /sys/module/rt2??0/ ] && IWPREUPLINE="$IWPREUPLINE pre-up /sbin/ifconfig $DV up\n"
+
+ if [ -n "$IWCONFIG" ]; then
+ IWPREUPLINE="$IWPREUPLINE iwconfig $IWCONFIG\n"
+ fi
+
+ if [ -n "$IWSPY" ]; then
+ IWPREUPLINE="$IWPREUPLINE iwspy $IWSPY\n"
+ fi
+
+ if [ -n "$IWPRIV" ]; then
+ IWPREUPLINE="$IWPREUPLINE iwpriv $IWPRIV\n"
+ fi
+
+ # execute ESSID last, but make sure that it is written as first option
+ if [ -n "$ESSID" ]; then
+ IWOURLINE="$IWOURLINE wireless-essid $ESSID\n"
+ fi
+
+ if [ $WPAON -gt 0 ]; then
+ # Using wpa requires a wpa_supplicant entry
+ IWPREUPLINE="${IWPREUPLINE}pre-up wpa_supplicant -D$WPA_DEV -i$WLDEVICE -c/etc/wpa_supplicant.conf -B\n"
+ touch /etc/wpa_supplicant.conf
+ awk '/^network={/{if(found){found=0}else{found=1;hold=$0}}/ssid={/{if(/ssid='"$ESSID"'/){found=1}else{found=0;print hold}}{if(!found){print}}' /etc/wpa_supplicant.conf >> "$TMP"
+ wpa_passphrase "$ESSID" "$WPASECRET" 2>/dev/null >> "$TMP"
+ mv -f /etc/wpa_supplicant.conf /etc/wpa_supplicant.conf.$(date +%Y%m%d_%H%M)
+ if ! grep -q "For more information take a look at" /etc/wpa_supplicant.conf ; then
+ cat >$WPATMP <<EOF
+# /etc/wpa_supplicant.conf
+# For more information take a look at /usr/share/doc/wpasupplicant/
+#
+# Other WPA options:
+# scan_ssid [0]|1
+# bssid 00:11:22:33:44:55
+# priority [0]|Integer
+# proto [WPA RSN] WPA|RSN
+# key_mgmt [WPA-PSK WPA-EAP]|NONE|WPA-PSK|WPA-EAP|IEEE8021X
+# pairwise [CCMP TKIP]|CCMP|TKIP|NONE
+# group [CCMP TKIP WEP105 WEP40]|CCMP|TKIP|WEP105|WEP40
+# eapol_flags [3]|1|2
+
+EOF
+ fi
+ [ -n "$APSCAN" ] && echo "$APSCAN" >> "$WPATMP"
+ cat "$WPATMP" "$TMP" > /etc/wpa_supplicant.conf
+ rm -f $WPATMP 2>/dev/null
+ IWDOWNLINE="${IWDOWNLINE}down killall wpa_supplicant\n"
+ fi
+
+ IWOURLINE="$IWOURLINE $IWPREUPLINE $IWDOWNLINE"
+ #echo "DEBUG: for interfaces $IWOURLINE"
+}
+
+device2props() {
+ PARTCOUNT=0
+ isauto=0
+ isfirewire=0
+ iswireless=0
+ driver=""
+ mac=""
+ for PART in $DEVICE; do
+ if [ $PARTCOUNT -eq 0 ]; then
+ DEVICENAME=$PART
+ else
+ echo $PART | grep -q A::1 && isauto=1
+ echo $PART | grep -q F::1 && isfirewire=1
+ echo $PART | grep -q W::1 && iswireless=1
+ [ -z "$driver" ] && driver=$(echo $PART|awk 'BEGIN {FS="::"} /^D:/{print $2}')
+ [ -z "$mac" ] && mac=$(echo $PART|awk 'BEGIN {FS="::"} /^M:/{print $2}')
+ fi
+ ((PARTCOUNT++))
+ done
+}
+
+props2string() {
+ MY_DEVICE_NAME=""
+ [ $isfirewire -gt 0 ] && MY_DEVICE_NAME="$NET_DEVICE_NAME_FW"
+ [ -z "$MY_DEVICE_NAME" -a $iswireless -gt 0 ] && MY_DEVICE_NAME="$NET_DEVICE_NAME_W"
+ [ -z "$MY_DEVICE_NAME" ] && MY_DEVICE_NAME="$NET_DEVICE_NAME"
+ MY_DEVICE_NAME="$DEVICENAME $MY_DEVICE_NAME $mac $driver"
+ [ $isauto -gt 0 ] && MY_DEVICE_NAME="$MY_DEVICE_NAME $NET_DEVICE_NAME_AUTO"
+ MY_DEVICE_NAME=$(echo $MY_DEVICE_NAME | sed 's/\ /__/g')
+}
+
+addauto() {
+ if ! egrep -e "^auto[ ]+.*$DV" /etc/network/interfaces >/dev/null; then
+ awk '{if(/^auto/){if(done==0){print $0 " '"$DV"'";done=1}else{print}}else{print}}END{if(done==0){print "auto '$DV'"}}' "/etc/network/interfaces" > "$TMP"
+ cat "$TMP" > /etc/network/interfaces
+ fi
+}
+
+remauto(){
+ if egrep -e "^auto[ ]+.*$DV" /etc/network/interfaces >/dev/null; then
+ perl -pi -e 's/^(auto.*)'$DV'(.*)$/$1$2/;' /etc/network/interfaces
+ fi
+}
+
+configiface() {
+ [ ! -r /etc/network/interfaces ] && touch /etc/network/interfaces
+ DEVICE=${NETDEVICES[$DV]}
+ device2props
+ DV=$DEVICENAME
+ # wireless config
+ WLDEVICE="$(LANG=C LC_MESSAGEWS=C iwconfig $DV 2>/dev/null | awk '/802\.11|READY|ESSID/{print $1}')"
+ WLDEVICECOUNT="$(LANG=C LC_MESSAGEWS=C iwconfig $DV 2>/dev/null | wc -l)"
+ if [ $iswireless -gt 0 ] && $DIALOG --yesno "$MESSAGE13" 8 45; then
+ ESSID=""
+ NWID=""
+ MODE=""
+ CHANNEL=""
+ FREQ=""
+ SENS=""
+ RATE=""
+ KEY=""
+ RTS=""
+ FRAG=""
+ IWCONFIG=""
+ IWSPY=""
+ IWPRIV=""
+
+ if [ -f /etc/network/interfaces ]; then
+ awk '/iface/{if(/'"$DV"'/){found=1}else{found=0}}
+ /essid/{if(found){for(i=NF;i>=2;i--)essid=$i "~" essid}}
+ /nwid/{if(found){nwid=$NF}}
+ /mode/{if(found){mode=$NF}}
+ /channel/{if(found){channel=$NF}}
+ /freq/{if(found){freq=$NF}}
+ /sens/{if(found){sens=$NF}}
+ /rate/{if(found){rate=$NF}}
+ /rts/{if(found){rts=$NF}}
+ /frag/{if(found){frag=$NF}}
+ /iwconfig/{if(!/KEY/){if(found){iwconfig=$NF}}}
+ /iwspy/{if(found){iwspy=$NF}}
+ /iwpriv/{if(found){iwpriv=$NF}}
+ /wireless[-_]key/{if(found){gsub(/^\W*wireless[-_]key\W*/,"");key=$0}}
+ END{
+ if (!(length(essid))){essid="~~~"}
+ if (!(length(nwid))){nwid="~~~"}
+ if (!(length(mode))){mode="~~~"}
+ if (!(length(channel))){channel="~~~"}
+ if (!(length(freq))){freq="~~~"}
+ if (!(length(sens))){sens="~~~"}
+ if (!(length(rate))){rate="~~~"}
+ if (!(length(rts))){rts="~~~"}
+ if (!(length(frag))){frag="~~~"}
+ if (!(length(iwconfig))){iwconfig="~~~"}
+ if (!(length(iwspy))){iwspy="~~~"}
+ if (!(length(iwpriv))){iwpriv="~~~"}
+ if (!(length(key))){key="~~~"}
+ print essid" "nwid" "mode" "channel" "freq" "sens" "rate" "rts" "frag" "iwconfig" "iwspy" "iwpriv" "key
+ }' /etc/network/interfaces >"$TMP"
+
+ read ESSID NWID MODE CHANNEL FREQ SENS RATE RTS FRAG IWCONFIG IWSPY IWPRIV KEY<"$TMP"
+
+ if [ "$ESSID" = "~~~" ]; then ESSID=""; fi
+ if [ "$NWID" = "~~~" ]; then NWID=""; fi
+ if [ "$MODE" = "~~~" ]; then MODE=""; fi
+ if [ "$CHANNEL" = "~~~" ]; then CHANNEL=""; fi
+ if [ "$FREQ" = "~~~" ]; then FREQ=""; fi
+ if [ "$SENS" = "~~~" ]; then SENS=""; fi
+ if [ "$RATE" = "~~~" ]; then RATE=""; fi
+ if [ "$RTS" = "~~~" ]; then RTS=""; fi
+ if [ "$FRAG" = "~~~" ]; then FRAG=""; fi
+ if [ "$IWCONFIG" = "~~~" ]; then IWCONFIG=""; fi
+ if [ "$IWSPY" = "~~~" ]; then IWSPY=""; fi
+ if [ "$IWPRIV" = "~~~" ]; then IWPRIV=""; fi
+ if [ "$KEY" = "~~~" ]; then KEY=""; fi
+
+ ESSID=$(echo $ESSID | tr "~" " " | sed 's/ *$//')
+
+ if [ -z "$KEY" ]; then
+ KEY=$(cat /etc/network/wep.$DV 2>/dev/null)
+
+ if [ -z "$KEY" ]; then
+ PUBKEY=0
+ else
+ PUBKEY=-1
+ fi
+ else
+ PUBKEY=1
+ fi
+
+ #echo "DEBUG:E:$ESSID N:$NWID M:$MODE C:$CHANNEL F:$FREQ S:$SENS R:$RATE K:$KEY R:$RTS F:$FRAG I:$IWCONFIG I:$IWSPY I:$IWPRIV"
+ rm -f "$TMP"
+ fi
+
+ $DIALOG --inputbox "$MESSAGEW4 $DEVICENAME $MESSAGEW5" 15 50 "$ESSID" 2>"$TMP" || bailout 1
+ read ESSID <"$TMP" ; rm -f "$TMP"
+ [ -z "$ESSID" ] && ESSID="any"
+
+ $DIALOG --inputbox "$MESSAGEW6 $DEVICENAME $MESSAGEW7" 15 50 "$NWID" 2>"$TMP" || bailout 1
+ read NWID <"$TMP" ; rm -f "$TMP"
+
+ $DIALOG --inputbox "$MESSAGEW8 $DEVICENAME $MESSAGEW9" 15 50 "$MODE" 2>"$TMP" || bailout 1
+ read MODE <"$TMP" ; rm -f "$TMP"
+ [ -z "$MODE" ] && MODE="Managed"
+
+ $DIALOG --inputbox "$MESSAGEW10 $DEVICENAME $MESSAGEW11" 15 50 "$CHANNEL" 2>"$TMP" || bailout 1
+ read CHANNEL <"$TMP" ; rm -f "$TMP"
+
+ if [ -z "$CHANNEL" ]; then
+ $DIALOG --inputbox "$MESSAGEW12 $DEVICENAME $MESSAGEW13" 15 50 "$FREQ" 2>"$TMP" || bailout 1
+ read FREQ <"$TMP" ; rm -f "$TMP"
+ fi
+
+ WPAON=0
+ IWDRIVER=$driver
+
+ case $IWDRIVER in
+ ath_pci)
+ WPA_DEV="madwifi"
+ ;;
+ ipw2200|ipw2100)
+ WPA_DEV="wext"
+ ;;
+ hostap)
+ WPA_DEV="hostap"
+ ;;
+ esac
+
+ if [ -z "$WPA_DEV" ]; then
+ if [ -d /proc/net/ndiswrapper/$DV ]; then
+ WPA_DEV=ndiswrapper
+ elif [ -d /proc/net/hostap/$DV ]; then
+ WPA_DEV=hostap
+ elif [ $WLDEVICECOUNT -eq 1 ]; then
+ if [ -e /proc/driver/atmel ]; then
+ WPA_DEV=atmel
+ fi
+ fi
+ fi
+
+ WPAON=-1
+
+ if [ -n "$WPA_DEV" ]; then
+ if $DIALOG --yesno "$MESSAGEW22" 15 50; then
+ # Other wpa options
+ # scan_ssid [0]|1
+ # bssid 00:11:22:33:44:55
+ # priority [0]|Integer
+ # proto [WPA RSN] WPA|RSN
+ # key_mgmt [WPA-PSK WPA-EAP]|NONE|WPA-PSK|WPA-EAP|IEEE8021X
+ # pairwise [CCMP TKIP]|CCMP|TKIP|NONE
+ # group [CCMP TKIP WEP105 WEP40]|CCMP|TKIP|WEP105|WEP40
+ # eapol_flags [3]|1|2
+
+ if ! $DIALOG --yesno "Is SSID broadcast enabled?" 15 50; then
+ APSCAN="ap_scan=2"
+ fi
+ WPAON=1
+ KEY=""
+ WPASECRET=$(awk '/network/{if(found){found=0}else{found=1}}/ssid/{if(/ssid="'"$ESSID"'"/){found=1}else{found=0}}/#scan_ssid=1/#psk=/{if(found){gsub(/^\W*#psk="/,"");gsub(/"\W*$/,"");print}}' /etc/wpa_supplicant.conf)
+
+ $DIALOG --inputbox "$MESSAGEW23 $ESSID" 15 50 "$WPASECRET" 2>"$TMP" || bailout 1
+ WPASECRET=$(sed -e 's/\\/\\/g' "$TMP") && rm -r "$TMP"
+
+ case $WPA_DEV in
+ hostap)
+ MODE="Managed"
+ ;;
+ esac
+ else
+ WPASECRET=""
+ fi
+ else
+ WPASECRET=""
+ fi
+
+ # No need for a wep key if we are using wpa
+ if [ ! $WPAON -eq 1 ]; then
+ $DIALOG --inputbox "$MESSAGEW14 $DEVICENAME $MESSAGEW15" 15 50 "$KEY" 2>"$TMP" || bailout 1
+ read KEY <"$TMP" ; rm -f "$TMP"
+
+ if [ -n "$KEY" -a "$PUBKEY" -eq 0 ]; then
+ if ! $DIALOG --yesno "$MESSAGEW25 $DEVICENAME $MESSAGEW26" 15 50; then
+ PUBKEY=1
+ fi
+ fi
+ fi
+
+ $DIALOG --inputbox "$MESSAGEW16 $DEVICENAME $MESSAGEW17" 15 50 "$IWCONFIG" 2>"$TMP" || bailout 1
+ read IWCONFIG <"$TMP" ; rm -f "$TMP"
+
+ $DIALOG --inputbox "$MESSAGEW18 $DEVICENAME $MESSAGEW19" 15 50 "$IWSPY" 2>"$TMP" || bailout 1
+ read IWSPY <"$TMP" ; rm -f "$TMP"
+
+ $DIALOG --inputbox "$MESSAGEW20 $DEVICENAME $MESSAGEW21" 15 50 "$IWPRIV" 2>"$TMP" || bailout 1
+ read IWPRIV <"$TMP" ; rm -f "$TMP"
+
+ writeiwline
+ fi
+
+ if $DIALOG --yesno "$MESSAGE2" 8 45; then
+ if [ -w /etc/network/interfaces ]; then
+ rm -f "$TMP"
+ awk '/iface/{if(/'"$DV"'/){found=1}else{found=0}}
+ /^\W$/{if(blank==0){lastblank=1}else{lastblank=0}{blank=1}}
+ /\w/{blank=0;lastblank=0}
+ {if(!(found+lastblank)){print}}
+ END{print "iface '"$DV"' inet dhcp"}' \
+ /etc/network/interfaces >"$TMP"
+ echo -e "$IWOURLINE" >> $TMP
+ #echo -e "\n\n" >> $TMP
+ cat "$TMP" >/etc/network/interfaces
+ rm -f "$TMP"
+ # Add an "auto" entry
+ #addauto
+ fi
+ else
+ if [ -f /etc/network/interfaces ]; then
+ awk '/iface/{if(/'"$DV"'/){found=1}else{found=0}}
+ /address/{if(found){address=$NF}}
+ /netmask/{if(found){netmask=$NF}}
+ /broadcast/{if(found){broadcast=$NF}}
+ /gateway/{if(found){gateway=$NF}}
+ END{print address" "netmask" "broadcast" "gateway}' /etc/network/interfaces >"$TMP"
+ read IP NM BC DG <"$TMP"
+ rm -f "$TMP"
+ fi
+
+ $DIALOG --inputbox "$MESSAGE6 $DV" 10 45 "${IP:-192.168.0.1}" 2>"$TMP" || bailout 1
+ read IP <"$TMP" ; rm -f "$TMP"
+
+ $DIALOG --inputbox "$MESSAGE7 $DV" 10 45 "${NM:-255.255.255.0}" 2>"$TMP" || bailout 1
+ read NM <"$TMP" ; rm -f "$TMP"
+
+ $DIALOG --inputbox "$MESSAGE8 $DV" 10 45 "${BC:-${IP%.*}.255}" 2>"$TMP" || bailout 1
+ read BC <"$TMP" ; rm -f "$TMP"
+
+ $DIALOG --inputbox "$MESSAGE9" 10 45 "${DG:-${IP%.*}.254}" 2>"$TMP"
+ read DG <"$TMP" ; rm -f "$TMP"
+
+ if [ -f "/etc/resolv.conf" ]; then
+ NS="$(awk '/^nameserver/{printf "%s ",$2}' /etc/resolv.conf)"
+ fi
+
+ $DIALOG --inputbox "$MESSAGE10" 10 45 "${NS:-${IP%.*}.254}" 2>"$TMP"
+ read NS <"$TMP" ; rm -f "$TMP"
+
+ if [ -w /etc/network/interfaces ]; then
+ awk '/iface/{if(/'"$DV"'/){found=1}else{found=0}}
+ {if(!found){print}}
+ END{print "\niface '"$DV"' inet static\n\taddress '"$IP"'\n\tnetmask '"$NM"'\n\tnetwork '"${IP%.*}.0"'";if("'"$BC"'"!=""){print "\tbroadcast '"$BC"'"};if("'"$DG"'"!=""){print "\tgateway '"$DG"'"};if("'"$IWOURLINE"'"!=""){print "'"$IWOURLINE"'"};print "\n"}' \
+ /etc/network/interfaces >"$TMP"
+
+ cat "$TMP" >/etc/network/interfaces
+ rm -f "$TMP"
+
+ # Add an "auto" entry
+ #addauto
+ fi
+
+ if [ -n "$NS" ]; then
+ more=""
+
+ for i in $NS; do
+ if [ -z "$more" ]; then
+ more=yes
+ echo "$MESSAGE11 $i"
+ echo "nameserver $i" >/etc/resolv.conf
+ else
+ echo "$MESSAGE12 $i"
+ echo "nameserver $i" >>/etc/resolv.conf
+ fi
+ done
+ fi
+ fi
+ echo "Done."
+}
+
+DIALOG="dialog"
+export XDIALOG_HIGH_DIALOG_COMPAT=1
+[ -n "$DISPLAY" ] && [ -x /usr/bin/Xdialog ] && DIALOG="Xdialog"
+[ -f /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n
+
+# Default all strings to English
+NET_DEVICE_NAME="Network_device"
+NET_DEVICE_NAME_W="Wireless_device"
+NET_DEVICE_NAME_FW="Firewire_device"
+NET_DEVICE_NAME_AUTO="Auto"
+MESSAGE0="No supported network cards found."
+MESSAGE1="Please select network device"
+MESSAGE2="Use DHCP broadcast?"
+MESSAGE3="Sending DHCP broadcast from device"
+MESSAGE4="Failed."
+MESSAGE5="Hit return to exit."
+MESSAGE6="Please enter IP Address for "
+MESSAGE7="Please enter Network Mask for "
+MESSAGE8="Please enter Broadcast Address for "
+MESSAGE9="Please enter Default Gateway"
+MESSAGE10="Please enter Nameserver(s)"
+MESSAGE11="Setting Nameserver in /etc/resolv.conf to"
+MESSAGE12="Adding Nameserver to /etc/resolv.conf:"
+MESSAGE13="Setup wireless options?"
+MESSAGE14="Failed to bring up the interface, would you like to reconfigure it?"
+MESSAGE15="Interface enabled, do you want it auto enabled at boot?"
+MESSAGEW0="No wireless network card found."
+MESSAGEW1="Configuration of wireless parameters for"
+MESSAGEW3="Please configure IP parameters of the interface first"
+MESSAGEW4="Enter the ESSID for"
+MESSAGEW5="\n\n\n(empty for 'any', not recommended !)\n"
+MESSAGEW6="Enter the NWID (cell identifier)\nfor"
+MESSAGEW7=", if needed\n\n\n"
+MESSAGEW8="Enter the mode for"
+MESSAGEW9="\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
+MESSAGEW10="Enter channel number for"
+MESSAGEW11="\n\n(0 bis 16, empty for auto or if you want to\n enter the frequency next)\n"
+MESSAGEW12="Enter the frequency for"
+MESSAGEW13="\n\n(e.g 2.412G, empty for auto)"
+MESSAGEW14="Enter the encryption key\nfor"
+MESSAGEW15="\n\n(empty for cleartext, not recommended !!)"
+MESSAGEW16="Enter additional parameters for\n'iwconfig"
+MESSAGEW17="' if needed, e.g.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
+MESSAGEW18="Enter additional parameters for\n'iwspy"
+MESSAGEW19="' if needed\n\n\n"
+MESSAGEW20="Enter additional parameters for\n'iwpriv"
+MESSAGEW21="' if needed\n\n\n"
+MESSAGEW22="Enable WPA support?"
+MESSAGEW23="Enter the WPA passphrase (passphrase must be 8..63 characters) for"
+MESSAGEW25="Would you like to store your wep key in it's own private file ("
+MESSAGEW26=")? If you say no, your wep key will be stored in /etc/network/interfaces and will be readable by any account on your system. You may want to 'chmod 600 /etc/network/interfaces' if you answer no to this question"
+MESSAGEW27="Is SSID broadcast enabled?"
+
+case "$LANGUAGE" in
+ de|at|ch)
+ NET_DEVICE_NAME="Netzwerkkarte"
+ MESSAGE0="Keine unterstützten Netzwerkkarte(n) gefunden."
+ MESSAGE1="Bitte Netzwerkkarte auswählen"
+ MESSAGE2="DHCP Broadcast zur Konfiguration benutzen? (Nein=manuell)"
+ MESSAGE3="Sende DHCP Broadcast von Netzwerkkarte"
+ MESSAGE4="Fehlgeschlagen."
+ MESSAGE5="Eingabetaste zum Beenden."
+ MESSAGE6="Bitte geben Sie die IP-Adresse ein für "
+ MESSAGE7="Bitte geben Sie die Netzwerk-Maske ein für "
+ MESSAGE8="Bitte geben Sie die Broadcast-Adresse ein für "
+ MESSAGE9="Bitte geben Sie das Default-Gateway ein"
+ MESSAGE10="Bitte geben Sie den/die Nameserver ein"
+ MESSAGE11="Setze Nameserver in /etc/resolv.conf auf "
+ MESSAGE12="Füge Nameserver in /etc/resolv.conf hinzu:"
+ MESSAGE13="WLAN-Einstellungen konfigurieren?"
+ MESSAGE14="Fehler beim Aktivieren des Interface, wollen Sie es neu konfigurieren?"
+ MESSAGE15="Interface aktiviert, beim Systemstart automatisch aktivieren?"
+ MESSAGEW0="Keine Wireless-Netzwerkkarte gefunden."
+ MESSAGEW1="Konfiguration der Wireless-Parameter von"
+ MESSAGEW2="Bitte Wireless-Netzwerkkarte auswählen"
+ MESSAGEW3="Bitte konfigurieren Sie vorher die IP-Parameter der Karte !"
+ MESSAGEW4="Geben Sie die ESSID für"
+ MESSAGEW5="ein\n\n\n(leer für 'any', nicht zu empfehlen !!)\n"
+ MESSAGEW6="Geben Sie ggf. die NWID (Cell Identifier)\nfür"
+ MESSAGEW7="ein, falls es eine gibt\n\n\n"
+ MESSAGEW8="Geben Sie den Modus für"
+ MESSAGEW9="ein\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
+ MESSAGEW10="Geben Sie den Kanal für"
+ MESSAGEW11="ein\n\n(0 bis 16, leer für auto oder Frequenz-\neingabe im nächsten Fenster)\n"
+ MESSAGEW12="Geben Sie die Frequenz für"
+ MESSAGEW13="ein\n\n(z.B. 2.412G, leer für auto)"
+ MESSAGEW14="Geben Sie den Verschlüsselungs-Key\nfür"
+ MESSAGEW15="ein\n\n(leer für Klartext, nicht zu empfehlen !!)"
+ MESSAGEW16="Geben Sie ggf. zusätzliche Parameter für\n'iwconfig"
+ MESSAGEW17="' ein, z.B.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
+ MESSAGEW18="Geben Sie ggf. zusätzliche Parameter für\n'iwspy"
+ MESSAGEW19="' ein\n\n\n"
+ MESSAGEW20="Geben Sie ggf. zusätzliche Parameter für\n'iwpriv"
+ MESSAGEW21="' ein\n\n\n"
+ MESSAGEW22="WPA-Unterstützung aktivieren?"
+ MESSAGEW23="WPA-Passwort eingeben für"
+ MESSAGEW25="WEP-Schlüssel in privater Datei abspeichern ("
+ MESSAGEW26="? Wenn Sie hier Nein sagen, wird der WEP-Schlüssel in /etc/network/interfaces abgespeichert und kann von allen Accounts auf dem System gelesen werden. Wenn Sie mit Nein antworten, sollten Sie vielleicht 'chmod 600 /etc/network/interfaces' ausführen."
+ MESSAGEW27="Ist SSID Broadcast aktiviert?"
+ ;;
+ es)
+ NET_DEVICE_NAME="Dispositivo_de_la_red"
+ MESSAGE0="Se han encontrado tarjetas de red no soportadas."
+ MESSAGE1="Por favor, seleccione el dispositivo fisico de red"
+ MESSAGE2="¿Utilizar broadcast DHCP?"
+ MESSAGE3="Enviando broadcast DHCP desde el dispositivo"
+ MESSAGE4="Fallado."
+ MESSAGE5="Pulse enter para salir."
+ MESSAGE6="Por favor, inserte la dirección IP para "
+ MESSAGE7="Por favor, inserte la máscara de red para "
+ MESSAGE8="Por favor, inserte la dirección de Broadcast para "
+ MESSAGE9="Por favor, inserte la puerta de enlace por defecto"
+ MESSAGE10="Por favor, inserte los servidores DNS"
+ MESSAGE11="Poniendo los servidores de nombres de /etc/resolv.conf a "
+ MESSAGE12="Adicionando servidor DNS a /etc/resolv.conf:"
+ MESSAGEW0="No se ha encontrado una tarjeta inalámbrica."
+ MESSAGEW1="Configuración de los parámetros inalámbricos para"
+ MESSAGEW2="Por favor, seleccione un dispositivo de red inalámbrico"
+ MESSAGEW3="Por favor, configure primero los parámetros de la IP para la interfaz"
+ MESSAGEW4="Teclee el ESSID para"
+ MESSAGEW5="\n\n\n(vacío para 'cualquiera', ¡no recomendado!)\n"
+ MESSAGEW6="Teclee el NWID (identificador de celda)\npara"
+ MESSAGEW7=", si es necesario\n\n\n"
+ MESSAGEW8="Teclee el modo para"
+ MESSAGEW9="\n\n(Managed(=por_defecto), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
+ MESSAGEW10="Teclee el número del canal para"
+ MESSAGEW11="\n\n(0 bis 16, vacío para auto o si lo prefiere\n teclee la frecuencia seguidamente)\n"
+ MESSAGEW12="Teclee la frecuencia para"
+ MESSAGEW13="\n\n(ej. 2.412G, vacío para auto)"
+ MESSAGEW14="Teclee la clave de encriptación\npara"
+ MESSAGEW15="\n\n(vacío para texto plano, ¡¡no recomendado!!)"
+ MESSAGEW16="Teclee los parámetros adicionales para\n'iwconfig"
+ MESSAGEW17="' Si es necesario, ej.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
+ MESSAGEW18="Teclee los parámetros adicionales para\n'iwspy"
+ MESSAGEW19="' si es necesario\n\n\n"
+ MESSAGEW20="Teclee los parámetros adicionales para\n'iwpriv"
+ MESSAGEW21="' si es necesario\n\n\n"
+ ;;
+ it)
+ NET_DEVICE_NAME="Periferica_di_rete"
+ NET_DEVICE_NAME_W="Periferica_Wireless"
+ NET_DEVICE_NAME_FW="Periferica_Firewire"
+ NET_DEVICE_NAME_AUTO="Automatico"
+ MESSAGE0="Non ho trovato schede di rete supportate."
+ MESSAGE1="Per favore seleziona la periferica di rete"
+ MESSAGE2="Devo utilizzare il broadcast DHCP?"
+ MESSAGE3="Sto inviando il broadcast DHCP dalla periferica"
+ MESSAGE4="Fallito."
+ MESSAGE5="Premi invio per uscire."
+ MESSAGE6="Inserisci l'indirizzo IP per "
+ MESSAGE7="Inserisci la maschera di rete per "
+ MESSAGE8="Inserisci l'indirizzo di broadcast per "
+ MESSAGE9="Inserisci il Gateway di default"
+ MESSAGE10="Inserisci i Nameserver"
+ MESSAGE11="Sto settando i Nameserver in /etc/resolv.conf a"
+ MESSAGE12="Aggiungo i Nameserver in /etc/resolv.conf:"
+ MESSAGE13="Configuro le opzioni del wireless?"
+ MESSAGE14="Non riesco ad attivare l'interfaccia, vuoi riconfigurarla?"
+ MESSAGE15="Interfaccia attiva, vuoi abilitarla automaticamente all'avvio?"
+ MESSAGEW0="Nessuna scheda di rete wireless trovata."
+ MESSAGEW1="Configurazione dei parametri wireless per"
+ MESSAGEW3="Configura i parametri IP dell'interfaccia per prima cosa!"
+ MESSAGEW4="Inserisci l'ESSID per"
+ MESSAGEW5="\n\n\n(vuoto per 'tutti', non raccomandato!)\n"
+ MESSAGEW6="Inserisci il NWID (cell identifier)\nper"
+ MESSAGEW7=", se necessario\n\n\n"
+ MESSAGEW8="Inserisci la modalità per"
+ MESSAGEW9="\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
+ MESSAGEW10="Inserisci il numero di canale per"
+ MESSAGEW11="\n\n(da 0 a 16, vuoto per automatico o se vuoi\n inserire la frequnza dopo)\n"
+ MESSAGEW12="Inserisci la frequenza per"
+ MESSAGEW13="\n\n(es. 2.412G, vuoto per automatico)"
+ MESSAGEW14="Inserisci la chiave crittografica\nper"
+ MESSAGEW15="\n\n(vuoto per trasmissione in chiaro, non raccomandato!)"
+ MESSAGEW16="Inserisci i parametri aggiuntivi per\n'iwconfig"
+ MESSAGEW17="' se necessario, es.\n\n\nsens -80 rts 512 frag 512 rate 5.5M"
+ MESSAGEW18="Inserisci parametri aggiuntivi per\n'iwspy"
+ MESSAGEW19="' se necessario\n\n\n"
+ MESSAGEW20="Inserisci parametri aggiuntivi per\n'iwpriv"
+ MESSAGEW21="' se necessario\n\n\n"
+ MESSAGEW22="Abilito il supporto WPA?"
+ MESSAGEW23="Inserisci la Passphrase di WPA\nper"
+ MESSAGEW25="Vuoi memorizzare la tua chiave WEP nel suo file riservato ("
+ MESSAGEW26=")? Se dici no, la tua chiave WEP sarà memorizzata nel file /etc/network/interfaces e sarà leggibile da tutti gli account del tuo sistema. Dovresti fare 'chmod 600 /etc/network/interfaces' se rispondi no a questa domanda"
+ MESSAGEW27="Is SSID broadcast enabled?"
+ ;;
+fr)
+ NET_DEVICE_NAME="Carte_réseau"
+ MESSAGE0="Aucune carte réseau supportée trouvée."
+ MESSAGE1="Sélectionnez la carte réseau, svp"
+ MESSAGE2="Voulez-vous utiliser DHCP?"
+ MESSAGE3="Envoi de broadcast DHCP par la carte"
+ MESSAGE4="Echec."
+ MESSAGE5="Appuyez sur Entrée pour quitter."
+ MESSAGE6="Entrez une adresse IP pour "
+ MESSAGE7="Entrez le Masque de Sous-réseau pour "
+ MESSAGE8="Entrez l'adresse Broadcast pour "
+ MESSAGE9="Entrez l'IP de la Passerelle par Défaut"
+ MESSAGE10="Entrez Les DNS de votre FAI"
+ MESSAGE11="Réglage des DNS dans /etc/resolv.conf"
+ MESSAGE12="Ajoût des DNS dans /etc/resolv.conf:"
+ MESSAGEW0="Aucune carte Wifi trouvée."
+ MESSAGEW1="Configuration des paramètres de réseau sans fil pour "
+ MESSAGEW3="SVP, Commencez par configurer les paramètres d'IP de l'interface!"
+ MESSAGEW4="Entrez l'ESSID pour"
+ MESSAGEW5="\n\n\n(ne rien mettre pour 'peu importe' n'est pas recommandé !)\n"
+ MESSAGEW6="Entrez le NWID (cell identifier)\npour"
+ MESSAGEW7=", si nécessaire\n\n\n"
+ MESSAGEW8="Entrez le mode pour "
+ MESSAGEW9="\n\n(Managed(=default), Ad-Hoc, Master,\nRepeater, Secondary, auto)\n"
+ MESSAGEW10="Entrez numéro de canal pour"
+ MESSAGEW11="\n\n(0 à 16, vide pour auto ou si vous voulez\n entrer la fréquence ensuite)\n"
+ MESSAGEW12="Entrez la fréquence pour"
+ MESSAGEW13="\n\n(ex: 2.412G, vide pour auto)"
+ MESSAGEW14="Entrez la clé de cryptage\npour"
+ MESSAGEW15="\n\n(vide pour texte en clair, non recommandé !!)"
+ MESSAGEW16="Entrez des paramètres additionnels pour\n'iwconfig"
+ MESSAGEW17="' si nécessaire, comme \n\n\nsens -80 rts 512 frag 512 rate 5.5M"
+ MESSAGEW18="Entrer des paramètres additionnels pour\n'iwspy"
+ MESSAGEW19="' si nécessaire\n\n\n"
+ MESSAGEW20="Entrer des paramètres additionnels pour\n'iwpriv"
+ MESSAGEW21="' si nécessaire\n\n\n"
+ MESSAGEW22="Activer la protection WPA?"
+ MESSAGEW23="Entrez le mot-de-passe WPA pour"
+ MESSAGEW25="Clé WEP sauvée dans un fichier privé ("
+ MESSAGEW26="? Si vous répondez non ici, la clé WEP sera stockée dans /etc/network/interfaces et pourra être accessible à tous les utilisateurs de la machine. Peut-être serait-il alors judicieux de fixer ainsi les droits de 'interfaces': 'chmod 600 /etc/network/interfaces'"
+ MESSAGEW27="Is SSID broadcast enabled?"
+ ;;
+esac
+
+NETDEVICESCOUNT=0
+LAN=$(tail +3 /proc/net/dev|awk -F: '{print $1}'|sed "s/\s*//"|grep -v -e ^lo -e ^vmnet|sort)
+[ -n "$WLAN" ] || WLAN=$(tail +3 /proc/net/wireless|awk -F: '{print $1}'|sort)
+unset LAN_DEVICES WLAN_DEVICES FIREWIRE_DEVICES NETDEVICES
+while read dev mac; do
+#echo "Making NETDEVICES $NETDEVICESCOUNT $dev"
+ iswlan=$(echo $dev $WLAN|tr ' ' '\n'|sort|uniq -d)
+ isauto="0"
+ grep auto /etc/network/interfaces | grep -q $dev && isauto="1"
+ driver=$(ethtool -i $dev 2>/dev/null|awk '/^driver:/{print $2}')
+ if [ "$driver" ]; then
+ if [ "$iswlan" ]; then
+ NETDEVICES[$NETDEVICESCOUNT]="$dev A::$isauto M::$mac D::$driver W::1 F::0"
+ else
+ NETDEVICES[$NETDEVICESCOUNT]="$dev A::$isauto M::$mac D::$driver W::0 F::0"
+ fi
+ else
+ if [ "$iswlan" ]; then
+ NETDEVICES[$NETDEVICESCOUNT]="$dev A::$isauto M::$mac W::1 F::0"
+ else
+ NETDEVICES[$NETDEVICESCOUNT]="$dev A::$isauto M::$mac W::0 F::0"
+ fi
+ fi
+#echo "Made to ${NETDEVICES[$NETDEVICESCOUNT]}"
+ ((NETDEVICESCOUNT++))
+done < <(ifconfig -a|grep Ethernet|grep -v ^vmnet|awk '! /^\s/{print $1" "$5}')
+for dev in $LAN; do
+ if [ "$(ethtool -i $dev 2>/dev/null|awk '/^bus-info:/{print $2}')" == "ieee1394" ]; then
+ isauto="0"
+ grep auto /etc/network/interfaces | grep -q $dev && isauto="1"
+ NETDEVICES[$NETDEVICESCOUNT]="$dev A::$isauto D::$(ethtool -i $dev 2>/dev/null|awk '/^driver:/{print $2}') W::0 F::1"
+ ((NETDEVICESCOUNT++))
+ fi
+done
+
+#NETDEVICES="$(cat /proc/net/dev | awk -F: '/eth.:|lan.:|tr.:|wlan.:|ath.:|ra.:/{print $1}')"
+
+if [ -z "$NETDEVICES" ]; then
+ $DIALOG --msgbox "$MESSAGE0" 15 45
+ bailout
+fi
+
+count="$NETDEVICESCOUNT"
+
+if [ "$count" -gt 1 ]; then
+ DEVICELIST=""
+ mycount=0
+ while [ $mycount -lt $count ]; do
+ DEVICE=${NETDEVICES[$mycount]}
+#echo "$mycount is $DEVICE"
+ device2props
+#echo "name: $DEVICENAME auto: $isauto fw: $isfirewire mac: $mac driver: $driver"
+ props2string
+ DEVICELIST="$DEVICELIST $mycount $MY_DEVICE_NAME"
+ ((mycount++))
+ done
+fi
+
+# To translate
+EXITKEY="E"
+EXITMENU="$EXITKEY Exit"
+
+# main program loop until they bailout
+while (true); do
+ # first get the device
+ if [ "$count" -gt 1 ]; then
+ rm -f "$TMP"
+ $DIALOG --menu "$MESSAGE1" 18 60 12 $DEVICELIST $EXITMENU 2>"$TMP" || bailout
+ read DV <"$TMP" ; rm -f "$TMP"
+ [ "$DV" = "$EXITKEY" ] && bailout
+ else
+ # Only one device
+ DV=0
+ # they have asked to stop configuring the interface so exit
+ [ -z "$IFACEDONE" ] || bailout
+ fi
+ # device config loop
+ IFACEDONE=""
+ while [ -n "$DV" -a -z "$IFACEDONE" ]; do
+ configiface
+ ifdown $DV
+ sleep 3
+ if ! ifup $DV; then
+ $DIALOG --yesno "$MESSAGE14" 15 50 || IFACEDONE="DONE"
+ else
+ $DIALOG --yesno "$MESSAGE15" 15 50 && addauto || remauto
+ IFACEDONE="DONE"
+ fi
+ done
+done
+
+## END OF FILE #################################################################
projects / grml.org.git / blobdiff