+++ /dev/null
-#!/bin/sh
-
-set -e
-
-# Read cmdline
-for _PARAMETER in $(cat /proc/cmdline)
-do
- case "${_PARAMETER}" in
- module=*)
- _MODULE="${_PARAMETER#module=}"
- ;;
- esac
-done
-
-# Assemble filesystems
-if [ -z "${_MODULE}" ]
-then
- _FILESYSTEMS="/live/image/live/filesystem.squashfs"
-else
- for _FILESYSTEM in _MODULE
- do
- _FILESYSTEMS="${_FILESYSTEMS} /live/image/live/${_FILESYSTEM}"
- done
-fi
-
-# Exit if system is not debian live
-if [ ! -d /live/image ]
-then
- echo "E: live-toram only works on Debian Live systems."
-
- exit 1
-fi
-
-# Exit if filesystem not accessible
-for _FILESYSTEM in ${_FILESYSTEMS}
-do
- if [ ! -r ${_FILESYSTEM} ]
- then
- echo "E: ${_FILESYSTEM}: No such file"
- echo "I: live-toram already run?"
-
- exit 1
- fi
-done
-
-# Exit if user is unprivileged
-if [ "$(id -u)" -ne 0 ]
-then
- echo "E: need root privileges"
-
- exit 1
-fi
-
-# Exit if not enough free memory
-_SIZE=0
-
-for _FILESYSTEM in ${_FILESYSTEMS}
-do
- _SIZE="$((${_SIZE} + $(du ${_FILESYSTEM} | awk '{ print $1 }')))"
- _MEMORY="$(awk '/MemFree/ { print $2 }' /proc/meminfo)"
-done
-
-case ${@} in
- -f|--force)
- echo "W: Ignoring memory constrains as requested"
- ;;
-
- *)
- if [ $_MEMORY -lt $_SIZE ]
- then
- echo "E: not enough free memory available."
- echo "I: images need ${_SIZE}kB, free memory is ${_MEMORY}kB."
-
- exit 1
- fi
- ;;
-esac
-
-# Copying image to memory
-echo "P: Copying images to memory."
-echo "P: This may take a while..."
-
-# FIXME: doesn't work with multiple filesystems
-for _FILESYSTEM in ${_FILESYSTEMS}
-do
- if [ ! -x "$(which rsync 2>/dev/null)" ]
- then
- rsync -a --progress ${_FILESYSTEM} /tmp/live
- else
- cp -av ${_FILESYSTEM} /tmp/live
- fi
-
-LANGUAGE=C LANG=C LC_ALL=C perl << EOF
-open LOOP, '</dev/loop0' or die $!;
-open DEST, '</tmp/live' or die $!;
-ioctl(LOOP, 0x4C06, fileno(DEST)) or die $!
-close LOOP;
-close DEST;
-EOF
-
-done
-
-# Unmounting live media
-_DEVICE="$(awk '/\/live\/image / { print $1 }' /proc/mounts)"
-
-if [ -d /live/image ]
-then
- umount /live/image
- rmdir --ignore-fail-on-non-empty /live/image || true
-fi
-
-# Ejecting live media if it is not an optical device
-if [ "$(expr substr ${_DEVICE} 1 2)" != "sd" ] && \
- ! readlink /sys/block/$(expr substr ${_DEVICE} 6 3) | grep -q usb
-then
- if [ ! -x "$(which rsync 2>/dev/null)" ]
- then
- eject -p -m ${_DEVICE} >/dev/null 2>&1
- fi
-fi
-- Daniel Baumann <daniel@debian.org> Mon, 04 Jun 2012 17:31:32 +0200
+live-boot (3.0~a27-1+grml.7) grml-testing; urgency=low
+
+ * [a488db6] Enable write-mode for persistency related devices in
+ readonly/forensic mode
+
+ -- Michael Prokop <mika@grml.org> Fri, 14 Sep 2012 17:01:39 +0200
+
+live-boot (3.0~a27-1+grml.6) grml-testing; urgency=low
+
+ [ Lukas Schwaighofer ]
+ * [95fb70f] fixed legacy persistence handling
+
+ [ Michael Prokop ]
+ * [ed79f48] readonly: do not check for "forensic" boot option
+ * [72aebf1] Move changes to scripts/live-premount/readonly into debian
+ patch file
+
+ -- Michael Prokop <mika@grml.org> Fri, 07 Sep 2012 13:43:08 +0200
+
+live-boot (3.0~a27-1+grml.5) grml-testing; urgency=low
+
+ * [8b51f69] Adjust 15_networking_grml.patch + 27_support_static_ip.patch
+ for klibc's ipconfig /run switch
+ * [bbeb928] Add "Breaks: klibc-utils (<< 2.0-2)" to live-boot-grml-
+ initramfs-tools for /run switch
+ * [cad0077] Refresh debian/patches/35_fix_findiso_umount.patch
+ * [7f450c2] Support overriding "nodhcp" boot option via "dhcp"
+ * [2b065a0] Adjust file permissions also of files that are added during
+ dh_quilt_patch stage
+
+ -- Michael Prokop <mika@grml.org> Fri, 27 Jul 2012 15:06:38 +0200
+
+live-boot (3.0~a27-1+grml.4) grml-testing; urgency=low
+
+ * [6d32dfe] Check for presence of /tmp/net-${device}.conf before
+ sourcing it [Closes: issue1196] Thanks to Marc 'Zugschlus' Haber for
+ the bugreport and debugging this issue
+
+ -- Michael Prokop <mika@grml.org> Mon, 23 Jul 2012 17:13:42 +0200
+
+live-boot (3.0~a27-1+grml.3) grml-testing; urgency=low
+
+ * [d978027] 35_fix_findiso_umount.patch: make sure ISO gets unmounted
+ correctly when using findiso/toram. Thanks to Christoph Biedl for the
+ bugreport and the patch
+ * [d621ee2] 34_ignore_unknown_filesystems.patch: also ignore fstype swap
+
+ -- Michael Prokop <mika@grml.org> Mon, 28 May 2012 12:27:08 +0200
+
+live-boot (3.0~a27-1+grml.2) grml-testing; urgency=low
+
+ * [e161c2c] New patch to ignore "unknown" filesystems in
+ is_supported_fs() [Testing: issue1170]
+
+ -- Michael Prokop <mika@grml.org> Sun, 20 May 2012 18:54:58 +0200
+
+live-boot (3.0~a27-1+grml.1) grml-testing; urgency=low
+
+ * [3039c63] Sync with Debian's upstream/3.0_a27 (new log file name,
+ persistency reworked,...)
+ * [06185b3] Bump Standards-Version, raise Build-Depends from dh 8 to dh
+ 9 + raise compat version to 9
+ * [2998c28] Drop debian/patches/07_support_findiso.patch which is in
+ upstream nowadays
+ * [3967979] Drop deprecated debian/patches/14_no_blkid_on_lenny.patch
+ * [91460b9] Refresh debian/patches/ against new upstream code
+ * [7116647] Drop deprecated debian/patches/28_remove_localized_manpages.patch
+
+ -- Michael Prokop <mika@grml.org> Wed, 09 May 2012 14:10:37 +0200
+
live-boot (3.0~a27-1) experimental; urgency=low
[ Daniel Baumann ]
-- Daniel Baumann <daniel@debian.org> Mon, 06 Feb 2012 23:27:38 +0100
+live-boot (3.0~a24-1+grml.2) grml-testing; urgency=low
+
+ [ Ulrich Dangel ]
+ * [87a8e76] Append nameservers provided via dns bootoption into
+ initramfs resolv.conf
+
+ [ Michael Prokop ]
+ * [1d25495] Add genext2fs to depends [Closes: issue1126] Thanks to
+ Charles A. Hewson for the bugreport
+
+ -- Michael Prokop <mika@grml.org> Wed, 04 Jan 2012 16:48:38 +0100
+
+live-boot (3.0~a24-1+grml.1) grml-testing; urgency=low
+
+ * Resynchronized with Debian.
+
+ [ Christian Hofstaedtler ]
+ * Resynchronized with Debian.
+ * Drop upstream-applied patch: 01_fix_output_file
+ * Drop upstream-applied patch: 10_validateroot
+ * Drop upstream-applied patch: 25_support_lvm_for_live-media
+ * 07_support_findiso: remove upstream-applied parts
+ * Manually refreshd patch 31_package_rename
+
+ [ Ulrich Dangel ]
+ * Add kms modules to initramfs
+ * Install hook instead of specifying modules.d
+
+ [ Michael Prokop ]
+ * Try loading phram module twice to fix loading issue.
+
+ -- Christian Hofstaedtler <ch@grml.org> Tue, 06 Dec 2011 22:26:32 +0100
+
live-boot (3.0~a24-1) unstable; urgency=low
* Removing quotes from udev path_id command to actually execute the
-- Daniel Baumann <daniel@debian.org> Thu, 04 Aug 2011 21:20:47 +0200
+live-boot (3.0~a19-1+grml.01) grml-testing; urgency=low
+
+ * Depend on quilt with a version to quiet lintian
+ * Add debian/control headers Origin, Bugs
+
+ -- Christian Hofstaedtler <ch@grml.org> Wed, 30 Nov 2011 13:24:41 +0100
+
+live-boot (3.0~a19-1+grml.00) unstable; urgency=low
+
+ * Resync with Debian. This brings in:
+ [ Daniel Baumann ]
+ * Updating and correcting sendsigs.omit support for /run (Closes: #628188).
+ * Removing accidentally twice included English files when installing manpages.
+ * Correct rmdir call in top-level Makefiles uninstall target to not fail if there was no prior live-boot installation.
+ * Making references to debian more distribution neutral.
+ * Replacing reference to old alioth page in live-snapshot.
+ * Splitting out documentation so that it can be accesses separately from the initramfs code.
+ * Adding conflicts/replaces for live-boot to live-boot-doc to not break upgrades.
+
+ * Grml changes:
+ [ Ulrich Dangel ]
+ * [8424e93] Use quilt instead of dpatch
+ * [86ca4d5] Remove old manpage live-snapshot.it.1.txt
+ * [7fb9e91] Support comma delimited devices in live-media-path
+ * [6b21c57] Depend on the same live-boot-initramfs-tools/live-boot-backend version.
+
+ [ Christian Hofstaedtler ]
+ * Rename packages to not clash with Debian.
+ * Resynced with Debian.
+
+ -- Christian Hofstaedtler <ch@grml.org> Mon, 25 Jul 2011 02:26:40 +0200
+
live-boot (3.0~a19-1) unstable; urgency=low
* Correct rmdir call in top-level Makefiles uninstall target to not
-- Daniel Baumann <daniel@debian.org> Sat, 11 Jun 2011 11:24:15 +0200
+live-boot (3.0~a17-1+grml.01) unstable; urgency=low
+
+ * [6666658] Do not fail in multiarch environment when
+ installing libnss_dns.so.
+ * [ebdefd9] Drop installation of localized manpages
+ from upstream Makefile.
+
+ -- Michael Prokop <mika@grml.org> Wed, 08 Jun 2011 12:15:23 +0200
+
+live-boot (3.0~a17-1+grml.00) unstable; urgency=low
+
+ [ Christian Hofstaedtler ]
+ * [c9a70fd] Add dpatch support to build process.
+ * [a9ddc0a] Readd Grml patches.
+ * [675f2b2] Remove unused boot scripts.
+ * [c4993d4] Update debian/control for Grml.
+ * [0716b66] Ensure 10validateroot is executable.
+ * [b5b937f] Always honor the "nodhcp" boot option.
+ * [10cf847] Don't mess around with kernel/initramfs-tools' ip=.
+ * [aa93321] Networking_grml: DNS for systems without resolvconf.
+ * [2a859b8] Merge dhcphostname support into 23networking-grml.
+ * [10caf0b] Support DNS in boot environment.
+
+ [ Michael Prokop ]
+ * [6cd3977] Add patch number 19 to revert the toram bootoption
+ to expected behaviour.
+ * [65fa11b] Support dns bootoption.
+
+ [ Ulrich Dangel ]
+ * [df17b43] Support lvm devices for live-media.
+ * [8ff045c] Support raid devices as well.
+ * [2ad3c30] Change output to live-boot.log.
+ * [34b4518] Explicit specify offset parameter for setup_loop.
+ [Closes: issue1003]
+ * [3ac64e5] Remove dba from uploader as this is a Grml project.
+ * [b289379] Support static ip configuration.
+ * [1371673] Improve static version.
+ * [9487c5d] Change nodhcp patch to unset the DHCP option as well.
+ * [1662374] Support nodhcp bootoption.
+ * [7847abd] Ignore devices with no file matching the findiso parameter.
+ * [7158e84] Don't show an error message if /live/image is already
+ unmounted.
+
+ -- Michael Prokop <mika@grml.org> Sun, 05 Jun 2011 21:29:14 +0200
+
live-boot (3.0~a17-1) unstable; urgency=low
[ Daniel Baumann ]
Source: live-boot
Section: misc
Priority: optional
-Maintainer: Debian Live Project <debian-live@lists.debian.org>
-Uploaders: Daniel Baumann <daniel@debian.org>
-Build-Depends: debhelper (>= 9)
+Maintainer: Grml Team <team@grml.org>
+Build-Depends: debhelper (>= 9), quilt (>= 0.46-7~)
Standards-Version: 3.9.4
Homepage: http://live.debian.net/devel/live-boot/
-Vcs-Browser: http://live.debian.net/gitweb/?p=live-boot.git
-Vcs-Git: git://live.debian.net/git/live-boot.git
+Vcs-Browser: http://git.grml.org/?p=live-boot-grml.git
+Vcs-Git: git://git.grml.org/live-boot-grml.git
+Origin: Grml
+Bugs: mailto:bugs@grml.org
-Package: live-boot
+Package: live-boot-grml
Architecture: all
-Depends: ${misc:Depends}, live-boot-initramfs-tools | live-boot-backend
-Recommends: live-boot-doc, rsync, uuid-runtime
+Depends: ${misc:Depends}, genext2fs, live-boot-grml-initramfs-tools | live-boot-backend
+Recommends: live-boot-grml-doc, eject, file, rsync, uuid-runtime
+Conflicts: live-boot
+Replaces: live-boot
+Provides: live-boot
Suggests: curlftpfs, cryptsetup, httpfs2, unionfs-fuse, wget
Description: Live System Boot Scripts
live-boot contains the scripts that configure a live system during the boot
.
In addition to live-boot, a backend for the initrd generation is required, such
as live-boot-initramfs-tools.
+ .
+ Please notice that this package is maintained by the grml.org team.
+ This is NOT a fork of Debian's live-boot, it's just a customized
+ version to better fit Grml's needs.
-Package: live-boot-doc
+Package: live-boot-grml-doc
Section: doc
Architecture: all
Depends: ${misc:Depends}
process (early userspace).
.
This package contains the documentation.
+ .
+ Please notice that this package is maintained by the grml.org team.
+ This is NOT a fork of Debian's live-boot, it's just a customized
+ version to better fit Grml's needs.
-Package: live-boot-initramfs-tools
+Package: live-boot-grml-initramfs-tools
Architecture: all
Depends:
${misc:Depends}, busybox | busybox-initramfs, initramfs-tools, udev
process (early userspace).
.
This package contains the initramfs-tools backend.
+ .
+ Please notice that this package is maintained by the grml.org team.
+ This is NOT a fork of Debian's live-boot, it's just a customized
+ version to better fit Grml's needs.
--- /dev/null
+activate update-initramfs
--- /dev/null
+#!/bin/sh
+
+### BEGIN INIT INFO
+# Provides: live-boot
+# Required-Start: $syslog bootmisc
+# Required-Stop:
+# Should-Start: $local_fs
+# Should-Stop: halt reboot
+# X-Stop-After: umountroot
+# Default-Start: S
+# Default-Stop: 0 6
+# Short-Description: live-boot init script
+# Description: Resyncs snapshots, evantually caches files in order to
+# let remove the media.
+### END INIT INFO
+
+# Authors: Tollef Fog Heen <tfheen@canonical.com>
+# Marco Amadori <marco.amadori@gmail.com>
+
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+NAME=live-boot
+SCRIPTNAME=/etc/init.d/${NAME}
+DO_SNAPSHOT=/sbin/live-snapshot
+SNAPSHOT_CONF="/etc/live/boot.d/snapshot.conf"
+
+# Exit if system was not booted by live-boot
+grep -qs boot=live /proc/cmdline || exit 0
+
+# Read snapshot configuration variables
+[ -r ${SNAPSHOT_CONF} ] && . ${SNAPSHOT_CONF}
+
+# Load the VERBOSE setting and other rcS variables
+[ -f /etc/default/rcS ] && . /etc/default/rcS
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+# Try to cache everything we're likely to need after ejecting. This
+# is fragile and simple-minded, but our options are limited.
+cache_path()
+{
+ path="${1}"
+
+ if [ -d "${path}" ]
+ then
+ find "${path}" -type f | xargs cat > /dev/null 2>&1
+ elif [ -f "${path}" ]
+ then
+ if file -L "${path}" | grep -q 'dynamically linked'
+ then
+ # ldd output can be of three forms:
+ # 1. linux-vdso.so.1 => (0x00007fffe3fb4000)
+ # This is a virtual, kernel shared library and we want to skip it
+ # 2. libc.so.6 => /lib/libc.so.6 (0x00007f5e9dc0c000)
+ # We want to cache the third word.
+ # 3. /lib64/ld-linux-x86-64.so.2 (0x00007f5e9df8b000)
+ # We want to cache the first word.
+ ldd "${path}" | while read line
+ do
+ if echo "$line" | grep -qs ' => '
+ then
+ continue
+ elif echo "$line" | grep -qs ' => '
+ then
+ lib=$(echo "${line}" | awk '{ print $3 }')
+ else
+ lib=$(echo "${line}" | awk '{ print $1 }')
+ fi
+ cache_path "${lib}"
+ done
+ fi
+
+ cat "${path}" >/dev/null 2>&1
+ fi
+}
+
+get_boot_device()
+{
+ # search in /proc/mounts for the device that is mounted at /live/image
+ while read DEVICE MOUNT REST
+ do
+ if [ "${MOUNT}" = "/live/image" ]
+ then
+ echo "${DEVICE}"
+ exit 0
+ fi
+ done < /proc/mounts
+}
+
+device_is_USB_flash_drive()
+{
+ # remove leading "/dev/" and all trailing numbers from input
+ DEVICE=$(expr substr ${1} 6 3)
+
+ # check that device starts with "sd"
+ [ "$(expr substr ${DEVICE} 1 2)" != "sd" ] && return 1
+
+ # check that the device is an USB device
+ if readlink /sys/block/${DEVICE} | grep -q usb
+ then
+ return 0
+ fi
+
+ return 1
+}
+
+do_stop ()
+{
+ if ! grep -qs nopersistent /proc/cmdline && grep -qs persistent /proc/cmdline
+ then
+ # ROOTSNAP and HOMESNAP are defined in ${SNAPSHOT_CONF} file
+ if [ ! -z "${ROOTSNAP}" ]
+ then
+ ${DO_SNAPSHOT} --resync-string="${ROOTSNAP}"
+ fi
+
+ if [ ! -z "${HOMESNAP}" ]
+ then
+ ${DO_SNAPSHOT} --resync-string="${HOMESNAP}"
+ fi
+ fi
+
+ # check for netboot
+ if [ ! -z "${NETBOOT}" ] || grep -qs netboot /proc/cmdline || grep -qsi root=/dev/nfs /proc/cmdline || grep -qsi root=/dev/cifs /proc/cmdline
+ then
+ return 0
+ fi
+
+ # check for toram
+ if grep -qs toram /proc/cmdline
+ then
+ return 0
+ fi
+
+ # Don't prompt to eject the SD card on Babbage board, where we reuse it
+ # as a quasi-boot-floppy. Technically this uses a bit of ubiquity
+ # (archdetect), but since this is mostly only relevant for
+ # installations, who cares ...
+ if type archdetect >/dev/null 2>&1
+ then
+ subarch="$(archdetect)"
+
+ case $subarch in
+ arm*/imx51)
+ return 0
+ ;;
+ esac
+ fi
+
+ prompt=1
+ if [ "${NOPROMPT}" = "Yes" ]
+ then
+ prompt=
+ fi
+
+ for path in $(which halt) $(which reboot) /etc/rc?.d /etc/default $(which stty) /bin/plymouth
+ do
+ cache_path "${path}"
+ done
+
+ for x in $(cat /proc/cmdline)
+ do
+ case ${x} in
+ quickreboot)
+ QUICKREBOOT="Yes"
+ ;;
+ esac
+ done
+
+ mount -o remount,ro /live/cow
+
+ if [ -z ${QUICKREBOOT} ]
+ then
+
+ # Exit if the system was booted from an ISO image rather than a physical CD
+ grep -qs find_iso= /proc/cmdline && return 0
+ # TODO: i18n
+ BOOT_DEVICE="$(get_boot_device)"
+
+ if device_is_USB_flash_drive ${BOOT_DEVICE}
+ then
+ # do NOT eject USB flash drives!
+ # otherwise rebooting with most USB flash drives
+ # failes because they actually remember the
+ # "ejected" state even after reboot
+ MESSAGE="Please remove the USB flash drive"
+
+ if [ "${NOPROMPT}" = "usb" ]
+ then
+ prompt=
+ fi
+
+ else
+ # ejecting is a very good idea here
+ MESSAGE="Please remove the disc, close the tray (if any)"
+
+ if [ -x /usr/bin/eject ]
+ then
+ eject -p -m /live/image >/dev/null 2>&1
+ fi
+
+ if [ ${NOPROMPT} = "cd" ]
+ then
+ prompt=
+ fi
+
+ fi
+
+ [ "$prompt" ] || return 0
+
+ if [ -x /bin/plymouth ] && plymouth --ping
+ then
+ plymouth message --text="${MESSAGE} and press ENTER to continue:"
+ plymouth watch-keystroke > /dev/null
+ else
+ stty sane < /dev/console
+
+ printf "\n\n${MESSAGE} and press ENTER to continue:" > /dev/console
+
+ read x < /dev/console
+ fi
+ fi
+}
+
+case "${1}" in
+ start|restart|reload|force-reload|status)
+ [ "${VERBOSE}" != no ] && log_end_msg 0
+ ;;
+
+ stop)
+ log_begin_msg "${NAME} is resyncing snapshots and caching reboot files..."
+ do_stop
+
+ case "${?}" in
+ 0|1)
+ [ "${VERBOSE}" != no ] && log_end_msg 0
+ ;;
+
+ 2)
+ [ "${VERBOSE}" != no ] && log_end_msg 1
+ ;;
+ esac
+ ;;
+
+ *)
+ log_success_msg "Usage: ${SCRIPTNAME} {start|stop|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
--- /dev/null
+# false positives, not applicable to live systems
+live-boot-grml: init.d-script-missing-dependency-on-remote_fs /etc/init.d/live-boot-grml: required-start
+live-boot-grml: init.d-script-missing-dependency-on-remote_fs /etc/init.d/live-boot-grml: required-stop
+live-boot-grml: init.d-script-possible-missing-stop /etc/init.d/live-boot-grml 1
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 03_grml_version_file_hook.dpatch by <mika@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Copy /etc/grml_version to initrd
+
+@DPATCH@
+
+--- a/backends/initramfs-tools/live.hook
++++ b/backends/initramfs-tools/live.hook
+@@ -16,6 +16,12 @@ do
+ fi
+ done
+
++# Grml version information:
++if [ -r /etc/grml_version ]
++then
++ cp /etc/grml_version "${DESTDIR}"/etc
++fi
++
+ # Checking live-boot
+ if [ ! -e /lib/live/boot ]
+ then
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 05_boot_failure_message_grml.dpatch by <mika@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Copy /etc/grml_version to initrd
+
+@DPATCH@
+
+--- a/scripts/boot/9990-initramfs-tools.sh
++++ b/scripts/boot/9990-initramfs-tools.sh
+@@ -44,14 +44,20 @@
+ printf " ${DEB_1}\n"
+ printf " ${DEB_2} \033[1;37mBOOT FAILED!\033[0m\n"
+ printf " ${DEB_3}\n"
+- printf " ${DEB_4} This Debian Live image failed to boot.\n\n"
++ printf " ${DEB_4} This image failed to boot.\n\n"
+
+- printf " Please file a bug against the 'live-boot' package or email the Debian\n"
+- printf " Live mailing list at <debian-live@lists.debian.org>, making sure to note the\n"
+- printf " exact version, name and distribution of the image you were attempting to boot.\n\n"
++ printf " Please file a bug at your distributors bug tracking system, making\n"
++ printf " sure to note the exact version, name and distribution of the image\n"
++ printf " you were attempting to boot.\n\n"
++
++ if [ -r /etc/grml_version ]
++ then
++ GRML_VERSION="$(cat /etc/grml_version)"
++ printf " $GRML_VERSION\n\n"
++ fi
+
+ printf " The file ${LIVELOG} contains some debugging information but booting with the\n"
+- printf " ${DEBUG} command-line parameter will greatly increase its verbosity which is\n"
++ printf " ${DEBUG}=1 command-line parameter will greatly increase its verbosity which is\n"
+ printf " extremely useful when diagnosing issues.\n\n"
+
+ if [ -n "${panic}" ]; then
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 08_grml_defaults.dpatch by Christian Hofstaedtler <ch@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Pseudo-brand as grml
+
+@DPATCH@
+--- a/scripts/boot/9990-aaa-fixme.sh
++++ b/scripts/boot/9990-aaa-fixme.sh
+@@ -9,7 +9,7 @@
+ alt_mountpoint="/media"
+ LIVE_MEDIA_PATH="live"
+
+-HOSTNAME="host"
++HOSTNAME="grml"
+
+ mkdir -p "${mountpoint}"
+ tried="/tmp/tried"
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 11_dhcphostname.dpatch by Andreas Thienemann <andreas@bawue.net>
+## and Michael Prokop <mika@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Support disabling setting hostname via DNS info
+
+@DPATCH@
+
+Support 'nodhcphostname' option which will disable setting the
+hostname of the booted system according to the DNS information.
+This patch takes care of the netboot case.
+
+--- a/scripts/boot/9990-cmdline-old
++++ b/scripts/boot/9990-cmdline-old
+@@ -140,6 +140,11 @@ Cmdline_old ()
+ export NFS_COW
+ ;;
+
++ nodhcphostname)
++ NODHCPHOSTNAME="Yes"
++ export NODHCPHOSTNAME
++ ;;
++
+ nofstab)
+ NOFSTAB="true"
+ export NOFSTAB
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 12_uuid_support.dpatch by Michael Prokop <prokop@grml-forensic.org>
+##
+## DP: This patch enables support for verifying the ISO through bootid=.... bootoption.
+## DP: Logic behind bootoptions and possible combinations:
+## DP: * bootid.txt + wrong bootid=... => fails to boot
+## DP: * bootid.txt + right bootid=... => boots
+## DP: * bootid.txt + ignore_bootid => boots
+## DP: * bootid.txt + no bootid=... + no ignore_bootid => fails to boot
+## DP: * no bootid.txt + no bootid=... + no ignore_bootid => boots
+## DP: * no bootid.txt + bootid=... => fails to boot
+## DP: * no bootid.txt + ignore_bootid=... => boots
+
+@DPATCH@
+--- a/scripts/boot/9990-misc-helpers.sh
++++ b/scripts/boot/9990-misc-helpers.sh
+@@ -52,6 +52,42 @@
+ return 1
+ }
+
++grml_match_bootid()
++{
++ path="$1"
++
++ if [ -n "$IGNORE_BOOTID" ] ; then
++ echo " * Ignoring verification of bootid.txt as requested via ignore_bootid.">>/live-boot.log
++ return 0
++ fi
++
++ if [ -n "$BOOTID" ] && ! [ -r "${path}/conf/bootid.txt" ] ; then
++ echo " * Warning: bootid=... specified but no bootid.txt found on currently requested device.">>/live-boot.log
++ return 1
++ fi
++
++ [ -r "${path}/conf/bootid.txt" ] || return 0
++
++ bootid_conf=$(cat "${path}/conf/bootid.txt")
++
++ if [ -z "$BOOTID" -a -z "$IGNORE_BOOTID" ]
++ then
++ echo " * Warning: bootid.txt found but ignore_bootid / bootid=.. bootoption missing...">>/live-boot.log
++ return 1
++ fi
++
++ if [ "$BOOTID" = "$bootid_conf" ]
++ then
++ echo " * Successfully verified /conf/bootid.txt from ISO, continuing... ">>/live-boot.log
++ else
++ echo " * Warning: BOOTID of ISO does not match. Retrying and continuing search...">>/live-boot.log
++ return 1
++ fi
++
++ return 0
++}
++
++
+ matches_uuid ()
+ {
+ if [ "${IGNORE_UUID}" ] || [ ! -e /conf/uuid.conf ]
+@@ -1350,7 +1386,7 @@
+ fi
+
+ if is_live_path ${mountpoint} && \
+- ([ "${skip_uuid_check}" ] || matches_uuid ${mountpoint})
++ ([ "${skip_uuid_check}" ] || grml_match_bootid ${mountpoint})
+ then
+ echo ${mountpoint}
+ return 0
+@@ -1446,19 +1482,6 @@
+ return 0
+ fi
+ done
+- elif [ "${fstype}" = "squashfs" -o \
+- "${fstype}" = "btrfs" -o \
+- "${fstype}" = "ext2" -o \
+- "${fstype}" = "ext3" -o \
+- "${fstype}" = "ext4" -o \
+- "${fstype}" = "jffs2" ]
+- then
+- # This is an ugly hack situation, the block device has
+- # an image directly on it. It's hopefully
+- # live-boot, so take it and run with it.
+- ln -s "${devname}" "${devname}.${fstype}"
+- echo "${devname}.${fstype}"
+- return 0
+ fi
+ done
+
+--- a/scripts/boot/9990-cmdline-old
++++ b/scripts/boot/9990-cmdline-old
+@@ -18,6 +18,11 @@
+ BOOTIF="${x#BOOTIF=}"
+ ;;
+
++ bootid=*)
++ BOOTID="${_PARAMETER#bootid=}"
++ export BOOTID
++ ;;
++
+ dhcp)
+ # Force dhcp even while netbooting
+ # Use for debugging in case somebody works on fixing dhclient
+@@ -79,6 +84,11 @@
+ export FROMISO
+ ;;
+
++ ignore_bootid)
++ IGNORE_BOOTID="Yes"
++ export IGNORE_BOOTID
++ ;;
++
+ ignore_uuid)
+ IGNORE_UUID="true"
+ export IGNORE_UUID
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 13_always_display_warnings_and_failures.dpatch by Michael Prokop <mika@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Always display failure and warning messages.
+
+@DPATCH@
+Index: live-boot-grml/scripts/boot/9990-initramfs-tools.sh
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-initramfs-tools.sh 2012-11-28 08:10:50.815614786 +0100
++++ live-boot-grml/scripts/boot/9990-initramfs-tools.sh 2012-11-28 08:25:12.864563943 +0100
+@@ -2,6 +2,17 @@
+
+ #set -e
+
++# we definitely want this stuff visible
++log_failure_msg()
++{
++ printf "Failure: $@\n"
++}
++
++log_warning_msg()
++{
++ printf "Warning: $@\n"
++}
++
+ log_wait_msg ()
+ {
+ # Print a message and wait for enter
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 15_networking_grml.dpatch by Christian Hofstaedtler <ch@grml.org>
+## Licensed under GPLv2+.
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Ship our own networking script, which is compatible with the kernel's
+## DP: notion of ip= as well as resolvconf.
+
+@DPATCH@
+
+diff a/scripts/live-bottom/23networking_grml b/scripts/live-bottom/23networking_grml
+--- /dev/null
++++ b/scripts/boot/9990-grml-networking.sh
+@@ -0,0 +1,93 @@
++#!/bin/sh
++
++#set -e
++
++Grml_Networking () {
++
++if [ -n "${NONETWORKING}" ]; then
++ exit 0
++fi
++
++modprobe af_packet # req'd for DHCP
++
++# initialize udev
++# (this /might/ be required for firmware loading to complete)
++if grep -q noudev /proc/cmdline; then
++ log_begin_msg "Networking: Skipping udev as requested via bootoption noudev."
++else
++ udevadm trigger
++ udevadm settle
++fi
++
++if [ -n "${IP}" ]; then
++ # call into initramfs-tools provided network setup functions, so basic
++ # networking is fine.
++ log_begin_msg "Networking: Waiting for basic network to come up..."
++ configure_networking
++fi
++
++# prepare a new /etc/network/interfaces file (and, possibly, a new /etc/resolv.conf)
++IFFILE="/root/etc/network/interfaces"
++RESOLVCONF="/root/etc/resolv.conf"
++
++# config for loopback networking
++cat > $IFFILE << EOF
++# Initially generated on boot by initramfs' 23networking.
++
++auto lo
++iface lo inet loopback
++
++EOF
++
++unset HOSTNAME
++
++# generate config for each present network device
++for interface in /sys/class/net/eth* /sys/class/net/ath* /sys/class/net/wlan*; do
++ [ -e ${interface} ] || continue
++ interface=$(basename ${interface})
++ method="dhcp"
++
++ # NODHCP or a previously run ipconfig mean that ifupdown should never
++ # touch this interface (IP-stack wise).
++ netconfig=/run/net-${interface}.conf
++ if [ -n "$NODHCP" ] || [ -e "${netconfig}" ]; then
++ method="manual"
++ fi
++
++ cat >> $IFFILE << EOF
++allow-hotplug ${interface}
++iface ${interface} inet ${method}
++EOF
++
++ # DNS for resolvconf and /etc/resolv.conf
++ if [ -e "${netconfig}" ]; then
++ . "${netconfig}"
++ if [ -n "${DNSDOMAIN}" ]; then
++ echo " dns-search ${DNSDOMAIN}" >> $IFFILE
++ fi
++ # make sure we don't have any 0.0.0.0 nameservers
++ IPV4DNSLIST=""
++ for IPV4DNS in ${IPV4DNS0} ${IPV4DNS1}; do
++ [ -n "${IPV4DNS}" ] || continue
++ [ "${IPV4DNS}" != "0.0.0.0" ] || continue
++ IPV4DNSLIST="${IPV4DNSLIST}${IPV4DNS} "
++ done
++ if [ -n "${IPV4DNSLIST}" ]; then
++ echo " dns-nameservers ${IPV4DNSLIST}" >> $IFFILE
++ for IPV4DNS in ${IPV4DNSLIST}; do
++ echo "nameserver ${IPV4DNS}" >> $RESOLVCONF
++ done
++ fi
++ fi
++
++ if [ -z "$NODHCPHOSTNAME" -a -n "$HOSTNAME" ]; then
++ echo $HOSTNAME > /root/etc/hostname
++ fi
++
++ unset DEVICE IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1 HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH filename
++ unset IPV4DNS IPV4DNSLIST
++
++ echo>> $IFFILE
++done
++
++}
+diff --git a/scripts/boot/9990-main.sh b/scripts/boot/9990-main.sh
+index ef41fb0..2af5eb6 100755
+--- a/scripts/boot/9990-main.sh
++++ b/scripts/boot/9990-main.sh
+@@ -194,6 +194,8 @@ Main ()
+
+ Swap
+
++ Grml_Networking
++
+ case "${UNIONFS}" in
+ unionfs-fuse)
+ umount "${rootmnt}/dev"
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 16_nodhcp.dpatch by Ulrich Dangel <mru@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Handle explicit "nodhcp"
+
+@DPATCH@
+
+--- a/scripts/boot/9990-cmdline-old
++++ b/scripts/boot/9990-cmdline-old
+@@ -28,6 +28,8 @@
+ nodhcp)
+ DHCP=""
+ export DHCP
++ NODHCP="Yes"
++ export NODHCP
+ ;;
+
+ ethdevice=*)
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 19_revert_toram_bootoption_to_expected_behaviour.dpatch by Michael Prokop <mika@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Revert toram bootoption to expected behaviour.
+## DP:
+## DP: In commit 36bb11382c81d5bce4b69f6d3d618dfd1c38dffb
+## DP: of live-initramfs-grml (when merging Debian's version 1.157.4-1)
+## DP: the behaviour of toram bootoption was modified, see
+## DP: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534878
+## DP:
+## DP: On Grml we want to have the option to load the whole medium
+## DP: into RAM to e.g. have additional directories like /deb,
+## DP: /scripts or whatever. This is possible using the toram bootoption
+## DP: without any additional arguments.
+## DP:
+## DP: If you do NOT want to load the whole medium to RAM just
+## DP: boot using toram=grml.squashfs (or whatever it's named,
+## DP: there's a ready-to-use bootoption in Grml's bootsplash
+## DP: menu available) instead.
+## DP:
+## DP: Ammusingly the requested behaviour is available in Debian's
+## DP: live-boot if rsync is not available, so this patch
+## DP: actually just unifies the code paths and reverts the
+## DP: behaviour change back to what the log message says.
+
+@DPATCH@
+
+index d79beed..1b6926e 100755
+--- a/scripts/boot/9990-toram-todisk.sh
++++ b/scripts/boot/9990-toram-todisk.sh
+@@ -202,7 +202,7 @@
+
+ if [ -z "${MODULETORAM}" ]
+ then
+- size=$(fs_size "" ${copyfrom}/${LIVE_MEDIA_PATH} "used")
++ size=$(fs_size "" ${copyfrom}/ "used")
+ else
+ MODULETORAMFILE="${copyfrom}/${LIVE_MEDIA_PATH}/${MODULETORAM}"
+
+@@ -278,8 +278,7 @@
+ echo " * Copying whole medium to RAM" 1>/dev/console
+ rsync -a --progress ${copyfrom}/* ${copyto} 1>/dev/console # "cp -a" from busybox also copies hidden files
+ else
+- mkdir -p ${copyto}/${LIVE_MEDIA_PATH}
+- cp -a ${copyfrom}/${LIVE_MEDIA_PATH}/* ${copyto}/${LIVE_MEDIA_PATH}
++ cp -a ${copyfrom}/* ${copyto}/
+ if [ -e ${copyfrom}/${LIVE_MEDIA_PATH}/.disk ]
+ then
+ cp -a ${copyfrom}/${LIVE_MEDIA_PATH}/.disk ${copyto}
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 26_support_dns_bootoption.dpatch by Michael Prokop <mika@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Support dns bootoption. Usage examples: dns=8.8.8.8 / dns=8.8.8.8,1.2.3.4
+
+@DPATCH@
+Index: live-boot-grml/scripts/boot/9990-networking.sh
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-networking.sh 2012-11-28 17:23:14.954502427 +0100
++++ live-boot-grml/scripts/boot/9990-networking.sh 2012-11-28 17:46:56.190917365 +0100
+@@ -153,7 +153,7 @@
+ echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
+ fi
+
+- for i in ${IPV4DNS0} ${IPV4DNS1} ${IPV4DNS1}
++ for i in ${IPV4DNS0} ${IPV4DNS1} ${IPV4DNS1} ${DNSSERVER1} ${DNSSERVER2}
+ do
+ if [ -n "$i" ] && [ "$i" != 0.0.0.0 ]
+ then
+Index: live-boot-grml/scripts/boot/9990-grml-networking.sh
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-grml-networking.sh 2012-11-28 17:46:38.000000000 +0100
++++ live-boot-grml/scripts/boot/9990-grml-networking.sh 2012-11-28 17:46:56.190917365 +0100
+@@ -28,7 +28,12 @@
+
+ # prepare a new /etc/network/interfaces file (and, possibly, a new /etc/resolv.conf)
+ IFFILE="/root/etc/network/interfaces"
+-RESOLVCONF="/root/etc/resolv.conf"
++if [ -L /root/etc/resolv.conf ] ; then
++ # assume we have resolvconf
++ RESOLVCONF=/root/etc/resolvconf/resolv.conf.d/base
++else
++ RESOLVCONF="/root/etc/resolv.conf"
++fi
+
+ # config for loopback networking
+ cat > $IFFILE << EOF
+@@ -90,4 +95,18 @@
+ echo>> $IFFILE
+ done
+
++# dns bootoption
++if [ -n "$DNSSERVER1" ]
++then
++ # disable any existing entries
++ if [ -r $RESOLVCONF ]
++ then
++ sed -i 's/nameserver/# nameserver/' $RESOLVCONF
++ fi
++ for i in $DNSSERVER1 $DNSSERVER2
++ do
++ echo "nameserver $i" >> $RESOLVCONF
++ done
++fi
++
+ }
+--- live-boot-grml.orig/scripts/boot/9990-cmdline-old 2012-11-28 17:46:38.000000000 +0100
++++ live-boot-grml/scripts/boot/9990-cmdline-old 2012-11-28 17:46:56.190917365 +0100
+@@ -18,6 +18,19 @@
+ BOOTIF="${x#BOOTIF=}"
+ ;;
+
++ dns=*)
++ DNSSERVER="${_PARAMETER#*=}"
++ if echo "${DNSSERVER}" | grep -q , ; then
++ DNSSERVER1="${DNSSERVER%,*}"
++ DNSSERVER2="${DNSSERVER#*,}"
++ export DNSSERVER1 DNSSERVER2
++ else
++ DNSSERVER1="$DNSSERVER"
++ export DNSSERVER1
++ fi
++ unset DNSSERVER
++ ;;
++
+ bootid=*)
+ BOOTID="${_PARAMETER#bootid=}"
+ export BOOTID
--- /dev/null
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 27_support_staticip.dpatch by <mru@grml.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: No description.
+
+@DPATCH@
+
+Index: live-boot-grml/scripts/boot/9990-networking.sh
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-networking.sh 2012-12-03 07:59:14.790837135 +0100
++++ live-boot-grml/scripts/boot/9990-networking.sh 2012-12-03 07:59:19.665258773 +0100
+@@ -2,6 +2,24 @@
+
+ #set -e
+
++get_ipconfig_para()
++{
++ if [ $# != 1 ] ; then
++ echo "Missin parameter for $0"
++ return
++ fi
++ devname=$1
++ for ip in ${STATICIP} ; do
++ case $ip in
++ *:$devname:*)
++ echo $ip
++ return
++ ;;
++ esac
++ done
++ echo $devname
++}
++
+ do_netsetup ()
+ {
+ modprobe -q af_packet # For DHCP
+@@ -12,8 +30,19 @@
+ [ -n "$ETHDEV_TIMEOUT" ] || ETHDEV_TIMEOUT=15
+ echo "Using timeout of $ETHDEV_TIMEOUT seconds for network configuration."
+
+- if [ -z "${NETBOOT}" ] && [ -z "${FETCH}" ] && [ -z "${HTTPFS}" ] && [ -z "${FTPFS}" ]
+- then
++ # Our modus operandi for getting a working network setup is this:
++ # * If ip=* is set, pass that to ipconfig and be done
++ # * Else, try dhcp on all devices in this order:
++ # ethdevice= bootif= <all interfaces>
++
++ ALLDEVICES="$(cd /sys/class/net/ && ls -1 2>/dev/null | grep -v '^lo$' )"
++
++ # Turn on all interfaces before doing anything, to avoid timing problems
++ # during link negotiation.
++ echo "Net: Turning on all device links..."
++ for device in ${ALLDEVICES}; do
++ ipconfig -c none -d $device -t 1 2>/dev/null >/dev/null
++ done
+ # support for Syslinux IPAPPEND parameter
+ # it sets the BOOTIF variable on the kernel parameter
+
+@@ -54,7 +83,7 @@
+
+ if [ "$bootif_mac" = "$current_mac" ]
+ then
+- DEVICE=${device##*/}
++ ETHDEVICE="${device##*/},$ETHDEVICE" # use ethdevice
+ break
+ fi
+ fi
+@@ -67,14 +96,7 @@
+ if [ -z "$ETHDEVICE" ]
+ then
+ echo "If you want to boot from a specific device use bootoption ethdevice=..."
+- for device in /sys/class/net/*
+- do
+- dev=${device##*/}
+- if [ "$dev" != "lo" ]
+- then
+- ETHDEVICE="$ETHDEVICE $dev"
+- fi
+- done
++ ETHDEVICE="$ALLDEVICES"
+ fi
+
+ # split args of ethdevice=eth0,eth1 into "eth0 eth1"
+@@ -83,46 +105,28 @@
+ devlist="$devlist $device"
+ done
+
+- # this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
+- # an endless loop; if execution fails give it two further tries, that's
+- # why we use '$devlist $devlist $devlist' for the other for loop
+- for dev in $devlist $devlist $devlist
+- do
+- echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
+- ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
+- jobid=$!
+- sleep "$ETHDEV_TIMEOUT" ; sleep 1
+- if [ -r /proc/"$jobid"/status ]
+- then
+- echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
+- kill -9 $jobid
++ for dev in $devlist ; do
++ param="$(get_ipconfig_para $dev)"
++ if [ -n "$NODHCP" ] && [ "$param" = "$dev" ] ; then
++ echo "Ignoring network device $dev due to nodhcp." | tee -a /live-boot.log
++ continue
+ fi
++ echo "Executing ipconfig -t $ETHDEV_TIMEOUT $param"
++ ipconfig -t "$ETHDEV_TIMEOUT" "$param" | tee -a /netboot.config
+
+ # if configuration of device worked we should have an assigned
+ # IP address, if so let's use the device as $DEVICE for later usage.
+ # simple and primitive approach which seems to work fine
+- if ifconfig $dev | grep -q 'inet.*addr:'
+- then
+- export DEVICE="$dev"
+- break
++ IPV4ADDR="0.0.0.0"
++ if [ -e "/run/net-${device}.conf" ]; then
++ . /run/net-${device}.conf
++ fi
++ if [ "${IPV4ADDR}" != "0.0.0.0" ]; then
++ export DEVICE="$dev $DEVICE"
++ # break # exit loop as we just use the irst
+ fi
+ done
+- else
+- for interface in ${DEVICE}; do
+- ipconfig -t "$ETHDEV_TIMEOUT" ${interface} | tee /netboot-${interface}.config
+-
+- # squeeze
+- [ -e /tmp/net-${interface}.conf ] && . /tmp/net-${interface}.conf
+-
+- # wheezy
+- [ -e /run/net-${interface}.conf ] && . /run/net-${interface}.conf
+-
+- if [ "$IPV4ADDR" != "0.0.0.0" ]
+- then
+- break
+- fi
+- done
+- fi
++ unset devlist
+
+ for interface in ${DEVICE}
+ do
+Index: live-boot-grml/scripts/boot/9990-cmdline-old
+===================================================================
+--- live-boot-grml.orig/scripts/boot/9990-cmdline-old 2012-12-03 07:59:14.794839124 +0100
++++ live-boot-grml/scripts/boot/9990-cmdline-old 2012-12-03 07:59:19.665258773 +0100
+@@ -51,9 +51,8 @@
+ ;;
+
+ ethdevice=*)
+- DEVICE="${_PARAMETER#ethdevice=}"
+- ETHDEVICE="${DEVICE}"
+- export DEVICE ETHDEVICE
++ ETHDEVICE="${_PARAMETER#ethdevice=}"
++ export ETHDEVICE
+ ;;
+
+ ethdevice-timeout=*)
+@@ -110,13 +109,9 @@
+ ;;
+
+ ip=*)
+- STATICIP="${_PARAMETER#ip=}"
+-
+- if [ -z "${STATICIP}" ]
+- then
+- STATICIP="frommedia"
+- fi
+-
++ # copy complete ip=args into staticip, and
++ # keep multiple uses.
++ STATICIP="${STATICIP} ${_PARAMETER}"
+ export STATICIP
+ ;;
+
--- /dev/null
+commit 10caf0b2db3fc04fae24ca896cf21f6aed12bbbc
+Author: Christian Hofstaedtler <ch@grml.org>
+Date: Fri Mar 25 23:02:38 2011 +0100
+
+ support DNS in boot environment
+
+ Thanks to Ulrich Dangel for discovering this. [Closes: issue848]
+
+--- a/backends/initramfs-tools/live.hook
++++ b/backends/initramfs-tools/live.hook
+@@ -217,24 +217,20 @@ fi
+
+ # Some experimental stuff
+
+-case "${LIVE_DNS}" in
+- true)
+- [ "${QUIET}" ] || echo -n " dns"
++[ "${QUIET}" ] || echo -n " dns"
+
+- # /lib/libnss_dns.so.*:a DNS
+- # /lib/libnss_files.so.*: /etc/hosts and /etc/passwd
+- # /lib/libnss_compat.so.*: /etc/passwd
++# /lib/libnss_dns.so.*:a DNS
++# /lib/libnss_files.so.*: /etc/hosts and /etc/passwd
++# /lib/libnss_compat.so.*: /etc/passwd
+
+- for _SHLIB in $(find /lib -name 'libnss_dns.so.*')
+- do
+- copy_exec "${_SHLIB}"
+- done
++for _SHLIB in $(find /lib -name 'libnss_dns.so.*')
++do
++ copy_exec "${_SHLIB}"
++done
+
+- # might be needed if /etc/hosts is used
+- #mkdir -p "${DESTDIR}/etc"
+- #cp -p /etc/nsswitch.conf "${DESTDIR}/etc"
+- ;;
+-esac
++# might be needed if /etc/hosts is used
++#mkdir -p "${DESTDIR}/etc"
++#cp -p /etc/nsswitch.conf "${DESTDIR}/etc"
+
+ case "${LIVE_UNIONMOUNT}" in
+ true)
--- /dev/null
+--- a/Makefile
++++ b/Makefile
+@@ -52,8 +52,8 @@
+ cp backends/initramfs-tools/live.script $(DESTDIR)/usr/share/initramfs-tools/scripts/live
+
+ # Installing docs
+- mkdir -p $(DESTDIR)/usr/share/doc/live-boot
+- cp -r COPYING $(DESTDIR)/usr/share/doc/live-boot
++ mkdir -p $(DESTDIR)/usr/share/doc/live-boot-grml
++ cp -r COPYING $(DESTDIR)/usr/share/doc/live-boot-grml
+
+ # Installing manpages
+ for MANPAGE in manpages/en/*; \
+@@ -86,7 +86,7 @@
+ rmdir --ignore-fail-on-non-empty $(DESTDIR)/usr > /dev/null 2>&1 || true
+
+ # Uninstalling docs
+- rm -rf $(DESTDIR)/usr/share/doc/live-boot
++ rm -rf $(DESTDIR)/usr/share/doc/live-boot-grml
+ rmdir --ignore-fail-on-non-empty $(DESTDIR)/usr/share/doc > /dev/null 2>&1 || true
+ rmdir --ignore-fail-on-non-empty $(DESTDIR)/usr/share > /dev/null 2>&1 || true
+ rmdir --ignore-fail-on-non-empty $(DESTDIR)/usr > /dev/null 2>&1 || true
--- /dev/null
+Index: live-boot-grml/hooks/kms
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ live-boot-grml/backends/initramfs-tools/kms.hook 2011-12-06 22:09:55.000000000 +0100
+@@ -0,0 +1,25 @@
++#!/bin/sh
++# hook for adding kms modules
++
++set -e
++
++# initramfs-tools header
++
++PREREQ=""
++prereqs()
++{
++ echo "${PREREQ}"
++}
++
++case "${1}" in
++ prereqs)
++ prereqs
++ exit 0
++ ;;
++esac
++
++. /usr/share/initramfs-tools/hook-functions
++
++for module in i915 radeon nouveau ; do
++ manual_add_modules $module
++done
--- /dev/null
+commit d4619b77a669c70ae68d5da34de7655ffef80e04
+Author: Michael Prokop <mika@grml.org>
+Date: Mon Jul 11 12:42:24 2011 +0200
+
+ Try loading phram module twice to fix loading issue.
+
+ phram doesn't work on first modprobe, when loading once again it seems
+ to work. So let's try it this way.
+
+--- a/scripts/boot/9990-main.sh
++++ b/scripts/boot/9990-main.sh
+@@ -1576,6 +1576,7 @@
+ then
+ # We found a memdisk, set up phram
+ modprobe phram phram=memdisk,${MEMDISK}
++ modprobe phram phram=memdisk,${MEMDISK}
+
+ # Load mtdblock, the memdisk will be /dev/mtdblock0
+ modprobe mtdblock
--- /dev/null
+--- a/scripts/boot/9990-misc-helpers.sh
++++ b/scripts/boot/9990-misc-helpers.sh
+@@ -507,6 +507,12 @@
+ return 1
+ fi
+
++ # get_fstype might report "unknown" or "swap", ignore it as no such kernel module exists
++ if [ "${fstype}" = "unknown" ] || [ "${fstype}" = "swap" ]
++ then
++ return 1
++ fi
++
+ # Try to look if it is already supported by the kernel
+ if grep -q ${fstype} /proc/filesystems
+ then
--- /dev/null
+--- a/scripts/boot/9990-grml-networking.sh
++++ b/scripts/boot/9990-grml-networking.sh
+@@ -75,6 +75,14 @@
+ method="manual"
+ fi
+
++ # if boot option "nodhcp" is set but also boot option "dhcp" is
++ # set, then dhcp should win over it as we default to dhcp and if
++ # nodhcp is used as default boot option but "dhcp" is added then it
++ # would be confusing to not get a working network setup
++ if [ "$DHCP" = "true" ] ; then
++ method="dhcp"
++ fi
++
+ cat >> $IFFILE << EOF
+ allow-hotplug ${interface}
+ iface ${interface} inet ${method}
--- /dev/null
+commit 7eaab98d69d8bdbc46cceaeac64007b214593174
+Author: lukas227 <lukas-gh@schwaighofer.name>
+Date: Mon Aug 13 22:35:27 2012 +0200
+
+ fixed legacy persistence handling
+
+ * the mount_persistence_media () function must return the mount point of
+ the partition to the caller, even if it was already mounted
+ (${backing} = ${old_backing})
+
+diff --git a/scripts/live-helpers b/scripts/live-helpers
+index b90637a..7d5c675 100644
+--- a/scripts/boot/9990-misc-helpers.sh
++++ b/scripts/boot/9990-misc-helpers.sh
+@@ -778,6 +778,7 @@ mount_persistence_media ()
+ return 1
+ fi
+ fi
++ echo ${backing}
+ return 0
+ }
+
--- /dev/null
+--- a/scripts/boot/0120-read-only
++++ b/scripts/boot/0120-read-only
+@@ -53,4 +53,20 @@
+ ;;
+ esac
+ done
++
++ if grep -qe persistence /proc/cmdline
++ then
++ printf " * Persistence mode enabled, searching for persistency related devices to unlock\n" >/dev/console
++
++ for label in custom-ov home-rw home-sn live-rw live-sn
++ do
++ if blkid -t LABEL="$label" | grep -q '.'
++ then
++ device=$(blkid -t LABEL="$label" | awk -F: '{print $1}')
++ printf " - Setting device %-9s with label '%s' to write mode for persistence mode: " "$device" "$label" >/dev/console
++ blockdev --setrw $device && printf "done\n" >/dev/console || printf "failed\n" >/dev/console
++ fi
++ done
++ fi
++
+ }
--- /dev/null
+Index: live-boot-grml/Makefile
+===================================================================
+--- live-boot-grml.orig/Makefile 2012-11-28 16:30:56.243755796 +0100
++++ live-boot-grml/Makefile 2012-11-28 16:36:50.614711051 +0100
+@@ -47,9 +47,13 @@
+
+ # Installing executables
+ mkdir -p $(DESTDIR)/usr/share/initramfs-tools/hooks
+- cp backends/initramfs-tools/live.hook $(DESTDIR)/usr/share/initramfs-tools/hooks/live
++ for f in backends/initramfs-tools/*.hook; do \
++ cp $${f} $(DESTDIR)/usr/share/initramfs-tools/hooks/$$(basename $${f} .hook); \
++ done
+ mkdir -p $(DESTDIR)/usr/share/initramfs-tools/scripts
+- cp backends/initramfs-tools/live.script $(DESTDIR)/usr/share/initramfs-tools/scripts/live
++ for f in backends/initramfs-tools/*.script; do \
++ cp $${f} $(DESTDIR)/usr/share/initramfs-tools/scripts/$$(basename $${f} .script); \
++ done
+
+ # Installing docs
+ mkdir -p $(DESTDIR)/usr/share/doc/live-boot-grml
--- /dev/null
+03_grml_version_file_hook.patch
+05_boot_failure_message_grml.patch
+08_grml_defaults.patch
+11_dhcphostname.patch
+12_uuid_support.patch
+13_always_display_warnings_and_failures.patch
+15_networking_grml.patch
+16_nodhcp.patch
+19_revert_toram_bootoption_to_expected_behaviour.patch
+26_support_dns_bootoption.patch
+27_support_static_ip.patch
+29_support_dns_in_initramfs.patch
+31_package_rename.patch
+32_add_kms.patch
+33_retry_phram.patch
+34_ignore_unknown_filesystems.patch
+36_support_dhcp_bootoption.patch
+37_fix_legacy_persistence_handling.patch
+39_persistence_with_forensic.patch
+40_support_multiple_hooks.patch
#!/usr/bin/make -f
+build:
+ # regular build.
+ dh build
+
%:
- dh ${@}
+ dh ${@} --with quilt
override_dh_auto_install:
dh_auto_install -- DESTDIR=debian/tmp
# Removing useless files
- rm -f debian/tmp/usr/share/doc/live-boot/COPYING
+ rm -f debian/tmp/usr/share/doc/live-boot-grml/COPYING
rm -f debian/lib/live/boot/FIXME
# live-boot-initramfs-tools
- mkdir -p debian/live-boot-initramfs-tools/usr/share
- mv debian/tmp/usr/share/initramfs-tools debian/live-boot-initramfs-tools/usr/share
+ mkdir -p debian/live-boot-grml-initramfs-tools/usr/share
+ mv debian/tmp/usr/share/initramfs-tools debian/live-boot-grml-initramfs-tools/usr/share
+
+ # this is needed because dpatch doesn't do file modes on diffs
+ # and we can't execute this fix during build stage as new files
+ # might be installed during dh_quilt_patch
+ chmod a+rx debian/live-boot-grml-initramfs-tools/usr/share/initramfs-tools/scripts/*
+ chmod a+rx debian/live-boot-grml-initramfs-tools/usr/share/initramfs-tools/hooks/*
override_dh_builddeb:
dh_builddeb -- -Zxz -z9
override_dh_install:
dh_install --fail-missing
+
+override_dh_installinit:
+ dh_installinit -p live-boot-grml --no-restart-on-upgrade --no-start --update-rcd-params='start 89 0 6 .'
+++ /dev/null
-live-snapshot(1)
-================
-:man source: 1.157.3
-:man manual: Debian Live
-
-Name
-----
-live-snapshot - uno script per facilitare l'uso della persistenza sui sistemi live
-
-Synopsis
---------
-live-snapshot [-c|--cow **DIRECTORY**s] [-d|--device **DEVICE**] [-e|--exclude-list **FILE**] [-o|--output **FILE**] [-t|--type **TYPE**]
-
-live-snapshot [-r|--resync-string **STRING**]
-
-live-snapshot [-h|--help]
-
-live-snapshot [-u|--usage]
-
-live-snapshot [-v|--version]
-
-Description
------------
-
-live-snapshot `e uno script che pu`o essere usato per costruire un file immagine formattato
-correttamente per essere usato da live-initramfs(7); viene inoltre usato dallo script di
-init di live-initramfs in uscita per sincronizzare i device di snapshot riconosciuti al boot.
-
-Options
--------
-
- -c, --cow **DIRECTORY**::
-
-specifica la directory da clonare nel file immagine. Il valore di default `e
-lo stesso default usato da live-initramfs per la sua directory COW (copy on
-write, un tempo situata in "/live/cow") ed `e sufficiente per gli usi comuni.
-Pu`o essere utile tuttavia specificare "/home" e come tipo "ext2" per
-preparare un file immagine adatto per essere montato da live-initramfs come
-"/home" al boot.
-
- -d, --device **DEVICE**::
-
-seleziona il device dove il file/partizione di snapshot o persistenza dovr`a
-essere sistemato. Se il device non ha un filesystem, ne verr`a creato uno
-automaticamente, di tipo ext2 ed etichettato (label) in base al valore
-specificato nell'opzione "--output" o con un default. Se non viene specificato
-nessun device, verr`a usato un "tmpfs" linkato sul desktop dell'utente, in
-modo che port`a essere mosso dove si vuole.
-
- -e, --exclude-list **FILE**::
-
-un file contenente una lista di file e percorsi che NON devono essere salvati.
-Questa lista verr`a inclusa nello snapshot per essere riutilizzata.
-
- -o, --output **FILE**::
-
-il nome del file o l'etichetta (label) da usare per il file o la partizione di
-snapshot. Se non specificata, live-snapshot cercher\`a un file all'interno
-del device oppure user`a l'intera partizione.
-
- -r, --resync-string **STRING**::
-
-usato internamente nelle sincronizzazioni dallo script di init di
-live-initramfs. Il formato pu\`o cambiare, usatelo a vostro rischio.
-
- -f, --refresh::
-
-scatena la stessa operazione che verrebbe fatta al reboot o all'halt della
-macchina, provando a fare il resync degli snapshot trovati al boot, usabile
-per salvare le modifiche in vista di un crash o di una mancanza di corrente.
-
- -t, --type **TYPE**::
-
-il tipo pu`o essere "cpio", "squashfs" o "ext2".
-
- -h, --help::
-
-mostra l'aiuto ed esce
-
- -u, --usage::
-
-mostra l'utilizzo ed esce
-
- -v, --version::
-
-da informazioni sulla versione ed esce
-
-Files
------
-
- /etc/live-snapshot.list
-
-Facoltativo, se presente cambia completamente il funzionamento di live-snapshot; solo i files e le directory elencate verranno effettivamente inclusi nello snapshot.
-Funziona attualmente solo con gli snapshot di tipo "cpio" e "partizione intera".
-
- /etc/live-snapshot.exclude_list
-
-Facoltativo, se presente verrà utilizzato per filtrare i file da includere negli snapshot. Tutte i file che conterranno le stringhe elecate (come "grep -F -v") non verranno salvati da live-snapshot.
-Funziona attualmente solo con gli snapshot di tipo "cpio", "partizione intera" e "squashfs"; è utile per filtrare contenuti poco significativi come i file temporanei e la cache.
-
-See also
---------
-
-live-initramfs(8)
-
-Questo programma fa parte di live-initramfs.
-
-Bugs
-----
-
-Riportate i bug sul pacchetto live-initramfs
-link:http://packages.qa.debian.org/live-initramfs[http://packages.qa.debian.org/live-initramfs].
-
-Homepage
---------
-
-Ulteriori informazioni su progetto Debian Live possono essere trovate su
-link:http://debian-live.alioth.debian.org/[http://debian-live.alioth.debian.org/] e
-link:http://wiki.debian.org/DebianLive/[http://wiki.debian.org/DebianLive/].
-
-Authors
--------
-
-live-initramfs `e mantenuto da Daniel Baumann <daniel@debian.org> per il
-progetto Debian. live-initramfs `e un fork di
-link:http://packages.ubuntu.com/casper[casper]. casper `e stato scritto
-originariamente da Tollef Fog Heen <tfheen@canonical.com> e Matt Zimmerman
-<mdz@canonical.com>.