# Reading configuration file from filesystem and live-media
for _FILE in /etc/live/boot.conf /etc/live/boot/* \
- /live/image/live/boot.conf /live/image/live/boot/*
+ /lib/live/image/live/boot.conf /lib/live/image/live/boot/*
do
if [ -e "${_FILE}" ]
then
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 7 26.09.2012 3.0~b3\-1 "Debian Live Project"
+.TH LIVE\-BOOT 7 27.09.2012 3.0~b4\-1 "Debian Live Project"
.SH NAME
\fBlive\-boot\fP \- System Boot Scripts
live\-boot will probe devices for persistence media. These can be partitions
(with the correct GPT name), filesystems (with the correct label) or image
files (with the correct file name). Overlays are labeled/named "persistence"
-(see \fIlive\-persistence.conf\fP(5)). Overlay image files have extensions which
+(see \fIpersistence.conf\fP(5)). Overlay image files have extensions which
determines their filesystem, e.g. "persistence.ext4".
.IP "\fBpersistence\-encryption\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
This option determines which types of encryption that we allow to be used
and without asking the user to remove the boot media.
.IP \fBshowmounts\fP 4
This parameter will make live\-boot to show on "/" the ro filesystems (mostly
-compressed) on "/live". This is not enabled by default because could lead to
-problems by applications like "mono" which store binary paths on
+compressed) on "/lib/live". This is not enabled by default because could
+lead to problems by applications like "mono" which store binary paths on
installation.
.IP \fBsilent\fP 4
If you boot with the normal quiet parameter, live\-boot hides most messages
.IP \fB/etc/live/boot/*\fP 4
.IP \fBlive/boot.conf\fP 4
.IP \fBlive/boot/*\fP 4
-.IP \fBlive\-persistence.conf\fP 4
+.IP \fBpersistence.conf\fP 4
.SH "SEE ALSO"
-\fIlive\-persistence.conf\fP(5)
+\fIpersistence.conf\fP(5)
.PP
\fIlive\-build\fP(7)
.PP
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT conf 26.09.2012 3.0~b3\-1 "Debian Live Project"
+.TH LIVE\-BOOT conf 27.09.2012 3.0~b4\-1 "Debian Live Project"
.SH NAME
-\fBlive\-persistence.conf\fP \- Configuration file for persistence media in
-live\-boot
+\fBpersistence.conf\fP \- Configuration file for persistence media in live\-boot
.SH DESCRIPTION
If live\-boot probes a persistence volume with the label (or GPT name, or
file name, but from now on we will just say "label") "persistence", that
-volume's persistence is fully customizable through the
-\fBlive\-persistence.conf\fP file stored on the root of its file system. Any
-such labeled volume must have such a file, or it will be ignored.
+volume's persistence is fully customizable through the \fBpersistence.conf\fP
+file stored on the root of its file system. Any such labeled volume must
+have such a file, or it will be ignored.
.PP
-The format of \fBlive\-persistence.conf\fP allows empty lines and lines starting
-with a "#" (used for comments), both which will be ignored. A so called
-"custom mount" has the format:
+The format of \fBpersistence.conf\fP allows empty lines and lines starting with
+a "#" (used for comments), both which will be ignored. A so called "custom
+mount" has the format:
.PP
.RS
\fIDIR\fP [\fIOPTION\fP]...
All custom mounts will be done in an order so that no two custom mounts can
"hide" each other. For instance, if we have the two \fIDIR\fP:s /a and /a/b it
would always be the case that /a is mounted first, then /a/b. This remains
-true no matter how the lines in \fBlive\-persistence.conf\fP are ordered, or if
-several \fBlive\-persistence.conf\fP files on different persistence media are
-used at the same time. However, it is forbidden for custom mounts to have
-their source directory inside the source directory of another custom mount,
-so the source directories that are auto\-created by live\-boot does not
-support "nested" mounts like /a and /a/b on the same media. In this case you
-must use the \fBsource\fP option (see below) to make sure that they are stored
-in different source directories.
+true no matter how the lines in \fBpersistence.conf\fP are ordered, or if
+several \fBpersistence.conf\fP files on different persistence media are used at
+the same time. However, it is forbidden for custom mounts to have their
+source directory inside the source directory of another custom mount, so the
+source directories that are auto\-created by live\-boot does not support
+"nested" mounts like /a and /a/b on the same media. In this case you must
+use the \fBsource\fP option (see below) to make sure that they are stored in
+different source directories.
.PP
When a source directory doesn't exist on the persistence media for a certain
custom mount, it will be created automatically, and permissions and
or \fBunion\fP options are used (see below).
.SH OPTIONS
-Custom mounts defined in \fBlive\-persistence.conf\fP accept the following
-options in a coma\-separated list:
+Custom mounts defined in \fBpersistence.conf\fP accept the following options in
+a coma\-separated list:
.IP \fBsource\fP=\fIPATH\fP 4
When given, store the persistence changes into \fIPATH\fP on the persistence
media. \fIPATH\fP must be a relative path (with respect to the persistence
.SH DIRECTORIES
.IP \fB/live/persistence\fP 4
All persistence volumes will be mounted here (in a directory corresponding
-to the device name). The \fBlive\-persistence.conf\fP file can easily be edited
+to the device name). The \fBpersistence.conf\fP file can easily be edited
through this mount, as well as any source directories (which is especially
practical for custom mounts using the \fBlink\fP option).
.SH EXAMPLES
-Let's say we have a persistence volume \fIVOL\fP with the a
-\fBlive\-persistence.conf\fP file containing the following four lines (numbered
-for ease of reference):
+Let's say we have a persistence volume \fIVOL\fP with the a \fBpersistence.conf\fP
+file containing the following four lines (numbered for ease of reference):
.TP 7
1.
/home/user1 link,source=config\-files/user1
c)
.PP
One could argue, though, that lines 1 and 2 in the example
-\fBlive\-persistence.conf\fP file above are unnecessary since line 3 already
-would make all of /home persistent. The \fBlink\fP option is intended for
-situations where you don't want a complete directory to be persistent, only
-certain files in it or its sub\-directories.
+\fBpersistence.conf\fP file above are unnecessary since line 3 already would
+make all of /home persistent. The \fBlink\fP option is intended for situations
+where you don't want a complete directory to be persistent, only certain
+files in it or its sub\-directories.
.PP
Line 4 can be mounted at any time since its \fIDIR\fP (and source directory) is
completely disjoint from all the other custom mounts. When mounted,
<\fIdebian\-live@lists.debian.org\fP>.
.SH AUTHOR
-live\-persistence.conf was written by anonym <\fIanonym@lavabit.com\fP>
-for the Debian project.
+persistence.conf was written by anonym <\fIanonym@lavabit.com\fP> for
+the Debian project.
-.TH LIVE\-BOOT 7 2012\-09\-26 3.0~b3-1 "Debian Live Project"
+.TH LIVE\-BOOT 7 2012\-09\-27 3.0~b4-1 "Debian Live Project"
.SH NAME
\fBlive\-boot\fR \- System Boot Scripts
.IP "\fBswapon\fR" 4
This parameter enables usage of local swap partitions.
.IP "\fBpersistence\fR" 4
-live\-boot will probe devices for persistence media. These can be partitions (with the correct GPT name), filesystems (with the correct label) or image files (with the correct file name). Overlays are labeled/named "persistence" (see \fIlive-persistence.conf\fR(5)). Overlay image files have extensions which determines their filesystem, e.g. "persistence.ext4".
+live\-boot will probe devices for persistence media. These can be partitions (with the correct GPT name), filesystems (with the correct label) or image files (with the correct file name). Overlays are labeled/named "persistence" (see \fIpersistence.conf\fR(5)). Overlay image files have extensions which determines their filesystem, e.g. "persistence.ext4".
.IP "\fBpersistence\-encryption\fR=\fITYPE1\fR,\fITYPE2\fR ... \fITYPEn\fR" 4
This option determines which types of encryption that we allow to be used when probing devices for persistence media. If "none" is in the list, we allow unencrypted media; if "luks" is in the list, we allow LUKS\-encrypted media. Whenever a device containing encrypted media is probed the user will be prompted for the passphrase. The default value is "none".
.IP "\fBpersistence\-media\fR={\fIremovable\fR|\fIremovable\-usb\fR}" 4
.IP "\fBquickreboot\fR" 4
This option causes live\-boot to reboot without attempting to eject the media and without asking the user to remove the boot media.
.IP "\fBshowmounts\fR" 4
-This parameter will make live\-boot to show on "/" the ro filesystems (mostly compressed) on "/live". This is not enabled by default because could lead to problems by applications like "mono" which store binary paths on installation.
+This parameter will make live\-boot to show on "/" the ro filesystems (mostly compressed) on "/lib/live". This is not enabled by default because could lead to problems by applications like "mono" which store binary paths on installation.
.IP "\fBsilent\fR" 4
If you boot with the normal quiet parameter, live\-boot hides most messages of its own. When adding silent, it hides all.
.IP "\fBtodisk\fR=\fIDEVICE\fR" 4
.IP "\fB/etc/live/boot/*\fR" 4
.IP "\fBlive/boot.conf\fR" 4
.IP "\fBlive/boot/*\fR" 4
-.IP "\fBlive-persistence.conf\fR" 4
+.IP "\fBpersistence.conf\fR" 4
.SH SEE ALSO
-\fIlive-persistence.conf\fR(5)
+\fIpersistence.conf\fR(5)
.PP
\fIlive\-build\fR(7)
.PP
-.TH LIVE\-BOOT conf 2012\-09\-26 3.0~b3-1 "Debian Live Project"
+.TH LIVE\-BOOT conf 2012\-09\-27 3.0~b4-1 "Debian Live Project"
.SH NAME
-\fBlive-persistence.conf\fR \- Configuration file for persistence media in
+\fBpersistence.conf\fR \- Configuration file for persistence media in
live\-boot
.SH DESCRIPTION
If live-boot probes a persistence volume with the label (or GPT name,
or file name, but from now on we will just say "label") "persistence",
that volume's persistence is fully customizable through the
-\fBlive-persistence.conf\fR file stored on the root of its file system. Any such
+\fBpersistence.conf\fR file stored on the root of its file system. Any such
labeled volume must have such a file, or it will be ignored.
.PP
-The format of \fBlive-persistence.conf\fR allows empty lines and lines starting
+The format of \fBpersistence.conf\fR allows empty lines and lines starting
with a "#" (used for comments), both which will be ignored. A so
called "custom mount" has the format:
.PP
mounts can "hide" each other. For instance, if we have the two
\fIDIR\fR:s /a and /a/b it would always be the case that /a is mounted
first, then /a/b. This remains true no matter how the lines in
-\fBlive-persistence.conf\fR are ordered, or if several \fBlive-persistence.conf\fR files
+\fBpersistence.conf\fR are ordered, or if several \fBpersistence.conf\fR files
on different persistence media are used at the same time. However, it
is forbidden for custom mounts to have their source directory inside
the source directory of another custom mount, so the source
options are used (see below).
.SH OPTIONS
-Custom mounts defined in \fBlive-persistence.conf\fR accept the following
+Custom mounts defined in \fBpersistence.conf\fR accept the following
options in a coma-separated list:
.IP "\fBsource\fR=\fIPATH\fR" 4
When given, store the persistence changes into \fIPATH\fR on the
.SH DIRECTORIES
.IP "\fB/live/persistence\fR" 4
All persistence volumes will be mounted here (in a directory
-corresponding to the device name). The \fBlive-persistence.conf\fR file can
+corresponding to the device name). The \fBpersistence.conf\fR file can
easily be edited through this mount, as well as any source directories
(which is especially practical for custom mounts using the
\fBlink\fR option).
.SH EXAMPLES
Let's say we have a persistence volume \fIVOL\fR with the a
-\fBlive-persistence.conf\fR file containing the following four lines (numbered
+\fBpersistence.conf\fR file containing the following four lines (numbered
for ease of reference):
.TP 7
1.
(from c)
.PP
One could argue, though, that lines 1 and 2 in the example
-\fBlive-persistence.conf\fR file above are unnecessary since line 3 already
+\fBpersistence.conf\fR file above are unnecessary since line 3 already
would make all of /home persistent. The \fBlink\fR option is
intended for situations where you don't want a complete directory to
be persistent, only certain files in it or its sub-directories.
Live mailing list at <\fIdebian-live@lists.debian.org\fR>.
.SH AUTHOR
-live\-persistence.conf was written by anonym <\fIanonym@lavabit.com\fR> for the
+persistence.conf was written by anonym <\fIanonym@lavabit.com\fR> for the
Debian project.
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 7 26.09.2012 3.0~b3\-1 "Proyecto Debian Live"
+.TH LIVE\-BOOT 7 27.09.2012 3.0~b4\-1 "Proyecto Debian Live"
.SH NOMBRE
\fBlive\-boot\fP \- Scripts de Arranque del Sistema
particiones (con el nombre GPT correcto), sistemas de ficheros (con la
etiqueta correcta) o ficheros imagen (con el nombre de fichero
correcto). Los overlays tienen la etiqueta/nombre "persistence" (ver
-\fIlive\-persistence.conf\fP(5)). Los ficheros imagen overlay tienen extensiones
-que determinan su sistema de ficheros, por ejemplo, "persistence.ext4".
+\fIpersistence.conf\fP(5)). Los ficheros imagen overlay tienen extensiones que
+determinan su sistema de ficheros, por ejemplo, "persistence.ext4".
.IP "\fBpersistence\-encryption\fP=\fITYPE1\fP,\fITYPE2\fP ... \fITYPEn\fP" 4
Esta opción determina qué tipo de cifrado se usa cuando se prueban los
dispositivos de los medios con persistencia. Si se especifica "none" en la
sin pedirle al usuario que extraiga el dispositivo usado para arrancar.
.IP \fBshowmounts\fP 4
Este parámetro hará que live\-boot muestre en "/" los sistemas de ficheros ro
-(en su mayoría comprimidos) en "/live". Esto no está activado por defecto,
-porque podría dar lugar a problemas con aplicaciones como "mono" que
-almacenan rutas binarias durante su instalación.
+(en su mayoría comprimidos) en "/lib/live". Esto no está activado por
+defecto, porque podría dar lugar a problemas con aplicaciones como "mono"
+que almacenan rutas binarias durante su instalación.
.IP \fBsilent\fP 4
Si arranca con el parámetro normal quiet, live\-boot esconde la mayoría de
sus propios mensajes. Cuando se utiliza silent, los esconde todos.
.IP \fB/etc/live/boot/*\fP 4
.IP \fBlive/boot.conf\fP 4
.IP \fBlive/boot.d/*\fP 4
-.IP \fBlive\-persistence.conf\fP 4
+.IP \fBpersistence.conf\fP 4
.SH "VER ADEMÁS"
-\fIlive\-persistence.conf\fP(5)
+\fIpersistence.conf\fP(5)
.PP
\fIlive\-build\fP(7)
.PP
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT conf 26.09.2012 3.0~b3\-1 "Proyecto Debian Live"
+.TH LIVE\-BOOT conf 27.09.2012 3.0~b4\-1 "Proyecto Debian Live"
.SH NOMBRE
-\fBlive\-persistence.conf\fP \- Fichero para configurar medios de almacenamiento
-con persistencia en live\-boot
+\fBpersistence.conf\fP \- Fichero para configurar medios de almacenamiento con
+persistencia en live\-boot
.SH DESCRIPCIÓN
Si live\-boot prueba un volumen persistente con la etiqueta (o nombre GPT, o
nombre de fichero, aunque a partir de este momento nos referiremos a él como
simplemente "etiqueta") "persistence", la persistencia de ese volumen es
-completamente personalizable a través del fichero \fBlive\-persistence.conf\fP
+completamente personalizable a través del fichero \fBpersistence.conf\fP
almacenado en la raíz de su sistema de ficheros. Cualquier volumen esa
etiqueta debe tener uno de esos ficheros, o si no será ignorado.
.PP
-El formato de \fBlive\-persistence.conf\fP permite añadir líneas vacias o líneas
-que comiencen por "#" (usado para los comentarios), ambos serán
-ignorados. Un "montaje personalizado" tiene el formato:
+El formato de \fBpersistence.conf\fP permite añadir líneas vacias o líneas que
+comiencen por "#" (usado para los comentarios), ambos serán ignorados. Un
+"montaje personalizado" tiene el formato:
.PP
.RS
\fIDIR\fP [\fIOPTION\fP]...
dos montajes personalizados no se "escondan" uno al otro. Por ejemplo, si
tenemos los dos \fIDIR\fP:s /a y /a/b siempre /a será montado en primer lugar,
después /a/b. Esto siempre es así sin importar el orden en que aparezcan las
-líneas en \fBlive\-persistence.conf\fP o incluso si se usan varios ficheros
-\fBlive\-persistence.conf\fP en medios persistentes distintos al mismo
-tiempo. Sin embargo, no está permitido que un montaje personalizado tenga su
-directorio de origen en el interior del directorio de origen de otro montaje
+líneas en \fBpersistence.conf\fP o incluso si se usan varios ficheros
+\fBpersistence.conf\fP en medios persistentes distintos al mismo tiempo. Sin
+embargo, no está permitido que un montaje personalizado tenga su directorio
+de origen en el interior del directorio de origen de otro montaje
personalizado, ya que los directorios de origen que live\-boot crea
automáticamente no tienen soporte para montajes "anidados" como /a y /a/b en
el mismo medio. En este caso se debe usar la opción \fBsource\fP (ver debajo)
opciones \fBlink\fP o \fBunion\fP (ver debajo).
.SH OPCIONES
-Los montajes personalizados definidos en \fBlive\-persistence.conf\fP aceptan
-las siguientes opciones en una lista separada por comas:
+Los montajes personalizados definidos en \fBpersistence.conf\fP aceptan las
+siguientes opciones en una lista separada por comas:
.IP \fBsource\fP=\fIPATH\fP 4
Cuando se especifica, se guardan los cambios persistentes en \fIPATH\fP en los
medios con persistencia. \fIPATH\fP debe ser una ruta relativa (respecto a la
.SH DIRECTORIOS
.IP \fB/live/persistence\fP 4
Aquí se montarán todos los volumenes persistentes (en un directorio que
-corresponda con el nombre del dispositivo). El fichero
-\fBlive\-persistence.conf\fP se puede editar fácilmente a través de este
-montaje, así como cualquier directorio de origen (esto resulta especialmente
-práctico para los montajes personalizados usando la opción \fBlink\fP).
+corresponda con el nombre del dispositivo). El fichero \fBpersistence.conf\fP
+se puede editar fácilmente a través de este montaje, así como cualquier
+directorio de origen (esto resulta especialmente práctico para los montajes
+personalizados usando la opción \fBlink\fP).
.SH EJEMPLOS
Si tenemos un volumen con persistencia \fIVOL\fP con un fichero
-\fBlive\-persistence.conf\fP que contiene las cuatro lineas siguientes
-(numeradas para una mejor referencia):
+\fBpersistence.conf\fPque contiene las cuatro lineas siguientes (numeradas para
+una mejor referencia):
.TP 7
1.
/home/user1 link,source=config\-files/user1
/home/user2/.ssh/config \-> \fIVOL\fP/config\-files/user2/.ssh/config (de c)
.PP
Se podría decir, sin embargo, que las líneas 1 y 2 en el fichero de ejemplo
-\fBlive\-persistence.conf\fP anterior son innecesarias ya que la línea 3 ya
-crearía el directorio /home persistente. La opción \fBlink\fP se utiliza en
+\fBpersistence.conf\fP anterior son innecesarias ya que la línea 3 ya crearía
+el directorio /home persistente. La opción \fBlink\fP se utiliza en
situaciones en las que no se desea guardar de forma persistente un
directorio completo, sino únicamente algunos ficheros o subdirectorios
incluidos en él.
<\fIdebian\-live@lists.debian.org\fP>.
.SH AUTOR
-live\-persistence.conf fue escrito por anonym <\fIanonym@lavabit.com\fP>
-para el proyecto Debian.
+persistence.conf fue escrito por anonym <\fIanonym@lavabit.com\fP> para
+el proyecto Debian.
#
msgid ""
msgstr ""
-"Project-Id-Version: live-boot 3.0~b3-1\n"
-"POT-Creation-Date: 2012-09-26 14:38+0300\n"
+"Project-Id-Version: live-boot 3.0~b4-1\n"
+"POT-Creation-Date: 2012-09-27 13:22+0300\n"
"PO-Revision-Date: 2012-04-08 22:48+0300\n"
"Last-Translator: Daniel Baumann <daniel@debian.org>\n"
"Language-Team: none\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "LIVE-BOOT"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "2012-09-26"
-msgstr "26.09.2012"
+msgid "2012-09-27"
+msgstr "27.09.2012"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "3.0~b3-1"
-msgstr "3.0~b3-1"
+msgid "3.0~b4-1"
+msgstr "3.0~b4-1"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "Debian Live Project"
msgstr ""
#. type: SH
-#: en/live-boot.7:3 en/live-persistence.conf.5:3
+#: en/live-boot.7:3 en/persistence.conf.5:3
#, no-wrap
msgid "NAME"
msgstr ""
msgstr ""
#. type: SH
-#: en/live-boot.7:6 en/live-persistence.conf.5:7
+#: en/live-boot.7:6 en/persistence.conf.5:7
#, no-wrap
msgid "DESCRIPTION"
msgstr ""
msgstr ""
#. type: SH
-#: en/live-boot.7:28 en/live-persistence.conf.5:57
+#: en/live-boot.7:28 en/persistence.conf.5:57
#, no-wrap
msgid "OPTIONS"
msgstr ""
"live-boot will probe devices for persistence media. These can be partitions "
"(with the correct GPT name), filesystems (with the correct label) or image "
"files (with the correct file name). Overlays are labeled/named \"persistence"
-"\" (see I<live-persistence.conf>(5)). Overlay image files have extensions "
-"which determines their filesystem, e.g. \"persistence.ext4\"."
+"\" (see I<persistence.conf>(5)). Overlay image files have extensions which "
+"determines their filesystem, e.g. \"persistence.ext4\"."
msgstr ""
#. type: IP
#: en/live-boot.7:131
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
-"(mostly compressed) on \"/live\". This is not enabled by default because "
+"(mostly compressed) on \"/lib/live\". This is not enabled by default because "
"could lead to problems by applications like \"mono\" which store binary "
"paths on installation."
msgstr ""
#. type: IP
#: en/live-boot.7:154
#, no-wrap
-msgid "B<live-persistence.conf>"
+msgid "B<persistence.conf>"
msgstr ""
#. type: SH
-#: en/live-boot.7:156 en/live-persistence.conf.5:191
+#: en/live-boot.7:156 en/persistence.conf.5:191
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
#: en/live-boot.7:158
-msgid "I<live-persistence.conf>(5)"
+msgid "I<persistence.conf>(5)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:160 en/live-persistence.conf.5:195
+#: en/live-boot.7:160 en/persistence.conf.5:195
msgid "I<live-build>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:162 en/live-persistence.conf.5:197
+#: en/live-boot.7:162 en/persistence.conf.5:197
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:164 en/live-persistence.conf.5:199
+#: en/live-boot.7:164 en/persistence.conf.5:199
msgid "I<live-tools>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:165 en/live-persistence.conf.5:200
+#: en/live-boot.7:165 en/persistence.conf.5:200
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:167 en/live-persistence.conf.5:204
+#: en/live-boot.7:167 en/persistence.conf.5:204
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
msgstr ""
#. type: SH
-#: en/live-boot.7:168 en/live-persistence.conf.5:205
+#: en/live-boot.7:168 en/persistence.conf.5:205
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:170 en/live-persistence.conf.5:210
+#: en/live-boot.7:170 en/persistence.conf.5:210
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
msgstr ""
#. type: SH
-#: en/live-boot.7:171 en/live-persistence.conf.5:211
+#: en/live-boot.7:171 en/persistence.conf.5:211
#, no-wrap
msgid "AUTHOR"
msgstr ""
#
msgid ""
msgstr ""
-"Project-Id-Version: live-boot 3.0~b3-1\n"
-"POT-Creation-Date: 2012-09-26 14:38+0300\n"
+"Project-Id-Version: live-boot 3.0~b4-1\n"
+"POT-Creation-Date: 2012-09-27 13:22+0300\n"
"PO-Revision-Date: 2012-04-08 22:48+0300\n"
"Last-Translator: Daniel Baumann <daniel@debian.org>\n"
"Language-Team: none\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "LIVE-BOOT"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "2012-09-26"
-msgstr "26.09.2012"
+msgid "2012-09-27"
+msgstr "27.09.2012"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "3.0~b3-1"
-msgstr "3.0~b3-1"
+msgid "3.0~b4-1"
+msgstr "3.0~b4-1"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "Debian Live Project"
msgstr ""
#. type: SH
-#: en/live-boot.7:3 en/live-persistence.conf.5:3
+#: en/live-boot.7:3 en/persistence.conf.5:3
#, no-wrap
msgid "NAME"
msgstr ""
#. type: SH
-#: en/live-boot.7:6 en/live-persistence.conf.5:7
+#: en/live-boot.7:6 en/persistence.conf.5:7
#, no-wrap
msgid "DESCRIPTION"
msgstr ""
#. type: SH
-#: en/live-boot.7:28 en/live-persistence.conf.5:57
+#: en/live-boot.7:28 en/persistence.conf.5:57
#, no-wrap
msgid "OPTIONS"
msgstr ""
#. type: SH
-#: en/live-boot.7:156 en/live-persistence.conf.5:191
+#: en/live-boot.7:156 en/persistence.conf.5:191
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:160 en/live-persistence.conf.5:195
+#: en/live-boot.7:160 en/persistence.conf.5:195
msgid "I<live-build>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:162 en/live-persistence.conf.5:197
+#: en/live-boot.7:162 en/persistence.conf.5:197
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:164 en/live-persistence.conf.5:199
+#: en/live-boot.7:164 en/persistence.conf.5:199
msgid "I<live-tools>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:165 en/live-persistence.conf.5:200
+#: en/live-boot.7:165 en/persistence.conf.5:200
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:167 en/live-persistence.conf.5:204
+#: en/live-boot.7:167 en/persistence.conf.5:204
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
msgstr ""
#. type: SH
-#: en/live-boot.7:168 en/live-persistence.conf.5:205
+#: en/live-boot.7:168 en/persistence.conf.5:205
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:170 en/live-persistence.conf.5:210
+#: en/live-boot.7:170 en/persistence.conf.5:210
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
msgstr ""
#. type: SH
-#: en/live-boot.7:171 en/live-persistence.conf.5:211
+#: en/live-boot.7:171 en/persistence.conf.5:211
#, no-wrap
msgid "AUTHOR"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:6
+#: en/persistence.conf.5:6
msgid ""
-"B<live-persistence.conf> - Configuration file for persistence media in live-"
-"boot"
+"B<persistence.conf> - Configuration file for persistence media in live-boot"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:13
+#: en/persistence.conf.5:13
msgid ""
"If live-boot probes a persistence volume with the label (or GPT name, or "
"file name, but from now on we will just say \"label\") \"persistence\", that "
-"volume's persistence is fully customizable through the B<live-persistence."
-"conf> file stored on the root of its file system. Any such labeled volume "
-"must have such a file, or it will be ignored."
+"volume's persistence is fully customizable through the B<persistence.conf> "
+"file stored on the root of its file system. Any such labeled volume must "
+"have such a file, or it will be ignored."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:17
+#: en/persistence.conf.5:17
msgid ""
-"The format of B<live-persistence.conf> allows empty lines and lines starting "
-"with a \"#\" (used for comments), both which will be ignored. A so called "
+"The format of B<persistence.conf> allows empty lines and lines starting with "
+"a \"#\" (used for comments), both which will be ignored. A so called "
"\"custom mount\" has the format:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:20
+#: en/persistence.conf.5:20
msgid "I<DIR> [I<OPTION>]..."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:24
+#: en/persistence.conf.5:24
msgid ""
"which roughly translates to \"make I<DIR> persistence in the way described "
"by the list of I<OPTION>s\"."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:35
+#: en/persistence.conf.5:35
msgid ""
"For each custom mount I<DIR> must be an absolute path that cannot contain "
"white spaces or the special . and .. path components, and cannot be /live "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:48
+#: en/persistence.conf.5:48
msgid ""
"All custom mounts will be done in an order so that no two custom mounts can "
"\"hide\" each other. For instance, if we have the two I<DIR>:s /a and /a/b "
"it would always be the case that /a is mounted first, then /a/b. This "
-"remains true no matter how the lines in B<live-persistence.conf> are "
-"ordered, or if several B<live-persistence.conf> files on different "
-"persistence media are used at the same time. However, it is forbidden for "
-"custom mounts to have their source directory inside the source directory of "
-"another custom mount, so the source directories that are auto-created by "
-"live-boot does not support \"nested\" mounts like /a and /a/b on the same "
-"media. In this case you must use the B<source> option (see below) to make "
-"sure that they are stored in different source directories."
+"remains true no matter how the lines in B<persistence.conf> are ordered, or "
+"if several B<persistence.conf> files on different persistence media are used "
+"at the same time. However, it is forbidden for custom mounts to have their "
+"source directory inside the source directory of another custom mount, so the "
+"source directories that are auto-created by live-boot does not support "
+"\"nested\" mounts like /a and /a/b on the same media. In this case you must "
+"use the B<source> option (see below) to make sure that they are stored in "
+"different source directories."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:56
+#: en/persistence.conf.5:56
msgid ""
"When a source directory doesn't exist on the persistence media for a certain "
"custom mount, it will be created automatically, and permissions and "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:60
+#: en/persistence.conf.5:60
msgid ""
-"Custom mounts defined in B<live-persistence.conf> accept the following "
-"options in a coma-separated list:"
+"Custom mounts defined in B<persistence.conf> accept the following options in "
+"a coma-separated list:"
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:60
+#: en/persistence.conf.5:60
#, no-wrap
msgid "B<source>=I<PATH>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:69
+#: en/persistence.conf.5:69
msgid ""
"When given, store the persistence changes into I<PATH> on the persistence "
"media. I<PATH> must be a relative path (with respect to the persistence "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:72
+#: en/persistence.conf.5:72
msgid ""
"The following options are mutually exclusive (only the last given one will "
"be in effect):"
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:72
+#: en/persistence.conf.5:72
#, no-wrap
msgid "B<bind>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:74
+#: en/persistence.conf.5:74
msgid "Bind-mount the source directory to I<DIR>. This is the default."
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:74
+#: en/persistence.conf.5:74
#, no-wrap
msgid "B<link>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:83
+#: en/persistence.conf.5:83
msgid ""
"Create the directory structure of the source directory on the persistence "
"media in I<DIR> and create symbolic links from the corresponding place in "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:91
+#: en/persistence.conf.5:91
msgid ""
"Effectively B<link> will make only files already in the source directory "
"persistent, not any other files in I<DIR>. These files must be manually "
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:91
+#: en/persistence.conf.5:91
#, no-wrap
msgid "B<union>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:101
+#: en/persistence.conf.5:101
msgid ""
"Save the rw branch of a union on the persistence media, so only the changes "
"are stored persistently. This can potentially reduce disk usage compared to "
msgstr ""
#. type: SH
-#: en/live-persistence.conf.5:102
+#: en/persistence.conf.5:102
#, no-wrap
msgid "DIRECTORIES"
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:103
+#: en/persistence.conf.5:103
#, no-wrap
msgid "B</live/persistence>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:109
+#: en/persistence.conf.5:109
msgid ""
"All persistence volumes will be mounted here (in a directory corresponding "
-"to the device name). The B<live-persistence.conf> file can easily be edited "
+"to the device name). The B<persistence.conf> file can easily be edited "
"through this mount, as well as any source directories (which is especially "
"practical for custom mounts using the B<link> option)."
msgstr ""
#. type: SH
-#: en/live-persistence.conf.5:110
+#: en/persistence.conf.5:110
#, no-wrap
msgid "EXAMPLES"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:115
+#: en/persistence.conf.5:115
msgid ""
-"Let's say we have a persistence volume I<VOL> with the a B<live-persistence."
-"conf> file containing the following four lines (numbered for ease of "
-"reference):"
+"Let's say we have a persistence volume I<VOL> with the a B<persistence.conf> "
+"file containing the following four lines (numbered for ease of reference):"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:115 en/live-persistence.conf.5:129
+#: en/persistence.conf.5:115 en/persistence.conf.5:129
#, no-wrap
msgid "1."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:118
+#: en/persistence.conf.5:118
msgid "/home/user1 link,source=config-files/user1"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:118 en/live-persistence.conf.5:133
+#: en/persistence.conf.5:118 en/persistence.conf.5:133
#, no-wrap
msgid "2."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:121
+#: en/persistence.conf.5:121
msgid "/home/user2 link,source=config-files/user2"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:121 en/live-persistence.conf.5:137
+#: en/persistence.conf.5:121 en/persistence.conf.5:137
#, no-wrap
msgid "3."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:124
+#: en/persistence.conf.5:124
msgid "/home"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:124 en/live-persistence.conf.5:140
+#: en/persistence.conf.5:124 en/persistence.conf.5:140
#, no-wrap
msgid "4."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:127
+#: en/persistence.conf.5:127
msgid "/usr union"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:129
+#: en/persistence.conf.5:129
msgid "The corresponding source directories are:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:133
+#: en/persistence.conf.5:133
msgid ""
"I<VOL>/config-files/user1 (but it would be I<VOL>/home/user1 without the "
"B<source> option)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:137
+#: en/persistence.conf.5:137
msgid ""
"I<VOL>/config-files/user2 (but it would be I<VOL>/home/user2 without the "
"B<source> option)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:140
+#: en/persistence.conf.5:140
msgid "I<VOL>/home"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:143
+#: en/persistence.conf.5:143
msgid "I<VOL>/usr"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:146
+#: en/persistence.conf.5:146
msgid ""
"It was necessary to set the B<source> options for 1 and 2, since they "
"otherwise would become nested with 3's source, which is invalid."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:151
+#: en/persistence.conf.5:151
msgid ""
"Line 3 will be taken care of before line 1 and 2 in order to prevent custom "
"mounts 1 and 2 from being hidden by 3. When line 3 is handled, I<VOL>/home "
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:151
+#: en/persistence.conf.5:151
#, no-wrap
msgid "a."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:154
+#: en/persistence.conf.5:154
msgid "I<VOL>/config-files/user1/.emacs"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:154
+#: en/persistence.conf.5:154
#, no-wrap
msgid "b."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:157
+#: en/persistence.conf.5:157
msgid "I<VOL>/config-files/user2/.bashrc"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:157
+#: en/persistence.conf.5:157
#, no-wrap
msgid "c."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:160
+#: en/persistence.conf.5:160
msgid "I<VOL>/config-files/user2/.ssh/config"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:162
+#: en/persistence.conf.5:162
msgid "Then the following links and directories will be created:"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:162 en/live-persistence.conf.5:165
-#: en/live-persistence.conf.5:171
+#: en/persistence.conf.5:162 en/persistence.conf.5:165
+#: en/persistence.conf.5:171
#, no-wrap
msgid "Link:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:165
+#: en/persistence.conf.5:165
msgid "/home/user1/.emacs -E<gt> I<VOL>/config-files/user1/.emacs (from a)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:168
+#: en/persistence.conf.5:168
msgid "/home/user2/.bashrc -E<gt> I<VOL>/config-files/user2/.bashrc (from b)"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:168
+#: en/persistence.conf.5:168
#, no-wrap
msgid "Dir:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:171
+#: en/persistence.conf.5:171
msgid "/homea/user2/.ssh (from c)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:175
+#: en/persistence.conf.5:175
msgid ""
"/home/user2/.ssh/config -E<gt> I<VOL>/config-files/user2/.ssh/config (from c)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:181
+#: en/persistence.conf.5:181
msgid ""
-"One could argue, though, that lines 1 and 2 in the example B<live-"
-"persistence.conf> file above are unnecessary since line 3 already would make "
-"all of /home persistent. The B<link> option is intended for situations where "
-"you don't want a complete directory to be persistent, only certain files in "
-"it or its sub-directories."
+"One could argue, though, that lines 1 and 2 in the example B<persistence."
+"conf> file above are unnecessary since line 3 already would make all of /"
+"home persistent. The B<link> option is intended for situations where you "
+"don't want a complete directory to be persistent, only certain files in it "
+"or its sub-directories."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:190
+#: en/persistence.conf.5:190
msgid ""
"Line 4 can be mounted at any time since its I<DIR> (and source directory) is "
"completely disjoint from all the other custom mounts. When mounted, I<VOL>/"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:193
+#: en/persistence.conf.5:193
msgid "I<live-boot>(7)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:213
+#: en/persistence.conf.5:213
msgid ""
-"live-persistence.conf was written by anonym E<lt>I<anonym@lavabit.com>E<gt> "
-"for the Debian project."
+"persistence.conf was written by anonym E<lt>I<anonym@lavabit.com>E<gt> for "
+"the Debian project."
msgstr ""
#
msgid ""
msgstr ""
-"Project-Id-Version: live-boot 3.0~b3-1\n"
-"POT-Creation-Date: 2012-09-26 14:38+0300\n"
+"Project-Id-Version: live-boot 3.0~b4-1\n"
+"POT-Creation-Date: 2012-09-27 13:22+0300\n"
"PO-Revision-Date: 2012-06-07 20:29+0200\n"
"Last-Translator: Carlos Zuferri «chals» <chals@altorricon.com>\n"
"Language-Team: none\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "LIVE-BOOT"
msgstr "LIVE-BOOT"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "2012-09-26"
-msgstr "26.09.2012"
+msgid "2012-09-27"
+msgstr "27.09.2012"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "3.0~b3-1"
-msgstr "3.0~b3-1"
+msgid "3.0~b4-1"
+msgstr "3.0~b4-1"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "Debian Live Project"
msgstr "Proyecto Debian Live"
#. type: SH
-#: en/live-boot.7:3 en/live-persistence.conf.5:3
+#: en/live-boot.7:3 en/persistence.conf.5:3
#, no-wrap
msgid "NAME"
msgstr "NOMBRE"
msgstr "B<live-boot> - Scripts de Arranque del Sistema"
#. type: SH
-#: en/live-boot.7:6 en/live-persistence.conf.5:7
+#: en/live-boot.7:6 en/persistence.conf.5:7
#, no-wrap
msgid "DESCRIPTION"
msgstr "DESCRIPCIÓN"
"boot.conf, live/boot/*)."
#. type: SH
-#: en/live-boot.7:28 en/live-persistence.conf.5:57
+#: en/live-boot.7:28 en/persistence.conf.5:57
#, no-wrap
msgid "OPTIONS"
msgstr "OPCIONES"
"live-boot will probe devices for persistence media. These can be partitions "
"(with the correct GPT name), filesystems (with the correct label) or image "
"files (with the correct file name). Overlays are labeled/named \"persistence"
-"\" (see I<live-persistence.conf>(5)). Overlay image files have extensions "
-"which determines their filesystem, e.g. \"persistence.ext4\"."
+"\" (see I<persistence.conf>(5)). Overlay image files have extensions which "
+"determines their filesystem, e.g. \"persistence.ext4\"."
msgstr ""
"live-boot buscará dispositivos con \"persistence\". Estos pueden ser "
"particiones (con el nombre GPT correcto), sistemas de ficheros (con la "
"etiqueta correcta) o ficheros imagen (con el nombre de fichero correcto). "
-"Los overlays tienen la etiqueta/nombre \"persistence\" (ver I<live-"
-"persistence.conf>(5)). Los ficheros imagen overlay tienen extensiones que "
-"determinan su sistema de ficheros, por ejemplo, \"persistence.ext4\"."
+"Los overlays tienen la etiqueta/nombre \"persistence\" (ver I<persistence."
+"conf>(5)). Los ficheros imagen overlay tienen extensiones que determinan su "
+"sistema de ficheros, por ejemplo, \"persistence.ext4\"."
#. type: IP
#: en/live-boot.7:113
#: en/live-boot.7:131
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
-"(mostly compressed) on \"/live\". This is not enabled by default because "
+"(mostly compressed) on \"/lib/live\". This is not enabled by default because "
"could lead to problems by applications like \"mono\" which store binary "
"paths on installation."
msgstr ""
"Este parámetro hará que live-boot muestre en \"/\" los sistemas de ficheros "
-"ro (en su mayoría comprimidos) en \"/live\". Esto no está activado por "
+"ro (en su mayoría comprimidos) en \"/lib/live\". Esto no está activado por "
"defecto, porque podría dar lugar a problemas con aplicaciones como \"mono\" "
"que almacenan rutas binarias durante su instalación."
#. type: IP
#: en/live-boot.7:154
#, no-wrap
-msgid "B<live-persistence.conf>"
-msgstr "B<live-persistence.conf>"
+msgid "B<persistence.conf>"
+msgstr "B<persistence.conf>"
#. type: SH
-#: en/live-boot.7:156 en/live-persistence.conf.5:191
+#: en/live-boot.7:156 en/persistence.conf.5:191
#, no-wrap
msgid "SEE ALSO"
msgstr "VER ADEMÁS"
#. type: Plain text
#: en/live-boot.7:158
-msgid "I<live-persistence.conf>(5)"
-msgstr "I<live-persistence.conf>(5)"
+msgid "I<persistence.conf>(5)"
+msgstr "I<persistence.conf>(5)"
#. type: Plain text
-#: en/live-boot.7:160 en/live-persistence.conf.5:195
+#: en/live-boot.7:160 en/persistence.conf.5:195
msgid "I<live-build>(7)"
msgstr "I<live-build>(7)"
#. type: Plain text
-#: en/live-boot.7:162 en/live-persistence.conf.5:197
+#: en/live-boot.7:162 en/persistence.conf.5:197
msgid "I<live-config>(7)"
msgstr "I<live-config>(7)"
#. type: Plain text
-#: en/live-boot.7:164 en/live-persistence.conf.5:199
+#: en/live-boot.7:164 en/persistence.conf.5:199
msgid "I<live-tools>(7)"
msgstr "I<live-tools>(7)"
#. type: SH
-#: en/live-boot.7:165 en/live-persistence.conf.5:200
+#: en/live-boot.7:165 en/persistence.conf.5:200
#, no-wrap
msgid "HOMEPAGE"
msgstr "PÁGINA WEB"
#. type: Plain text
-#: en/live-boot.7:167 en/live-persistence.conf.5:204
+#: en/live-boot.7:167 en/persistence.conf.5:204
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
"E<lt>I<http://live.debian.net/manual/>E<gt>."
#. type: SH
-#: en/live-boot.7:168 en/live-persistence.conf.5:205
+#: en/live-boot.7:168 en/persistence.conf.5:205
#, no-wrap
msgid "BUGS"
msgstr "ERRORES"
#. type: Plain text
-#: en/live-boot.7:170 en/live-persistence.conf.5:210
+#: en/live-boot.7:170 en/persistence.conf.5:210
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
"Live a la dirección E<lt>I<debian-live@lists.debian.org>E<gt>."
#. type: SH
-#: en/live-boot.7:171 en/live-persistence.conf.5:211
+#: en/live-boot.7:171 en/persistence.conf.5:211
#, no-wrap
msgid "AUTHOR"
msgstr "AUTOR"
#
msgid ""
msgstr ""
-"Project-Id-Version: live-boot 3.0~b3-1\n"
-"POT-Creation-Date: 2012-09-26 14:38+0300\n"
+"Project-Id-Version: live-boot 3.0~b4-1\n"
+"POT-Creation-Date: 2012-09-27 13:22+0300\n"
"PO-Revision-Date: 2012-06-07 19:11+0200\n"
"Last-Translator: Carlos Zuferri «chals» <chals@altorricon.com>\n"
"Language-Team: none\n"
"Content-Transfer-Encoding: 8bit\n"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "LIVE-BOOT"
msgstr "LIVE-BOOT"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "2012-09-26"
-msgstr "26.09.2012"
+msgid "2012-09-27"
+msgstr "27.09.2012"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "3.0~b3-1"
-msgstr "3.0~b3-1"
+msgid "3.0~b4-1"
+msgstr "3.0~b4-1"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "Debian Live Project"
msgstr "Proyecto Debian Live"
#. type: SH
-#: en/live-boot.7:3 en/live-persistence.conf.5:3
+#: en/live-boot.7:3 en/persistence.conf.5:3
#, no-wrap
msgid "NAME"
msgstr "NOMBRE"
#. type: SH
-#: en/live-boot.7:6 en/live-persistence.conf.5:7
+#: en/live-boot.7:6 en/persistence.conf.5:7
#, no-wrap
msgid "DESCRIPTION"
msgstr "DESCRIPCIÓN"
#. type: SH
-#: en/live-boot.7:28 en/live-persistence.conf.5:57
+#: en/live-boot.7:28 en/persistence.conf.5:57
#, no-wrap
msgid "OPTIONS"
msgstr "OPCIONES"
#. type: SH
-#: en/live-boot.7:156 en/live-persistence.conf.5:191
+#: en/live-boot.7:156 en/persistence.conf.5:191
#, no-wrap
msgid "SEE ALSO"
msgstr "VER ADEMÁS"
#. type: Plain text
-#: en/live-boot.7:160 en/live-persistence.conf.5:195
+#: en/live-boot.7:160 en/persistence.conf.5:195
msgid "I<live-build>(7)"
msgstr "I<live-build>(7)"
#. type: Plain text
-#: en/live-boot.7:162 en/live-persistence.conf.5:197
+#: en/live-boot.7:162 en/persistence.conf.5:197
msgid "I<live-config>(7)"
msgstr "I<live-config>(7)"
#. type: Plain text
-#: en/live-boot.7:164 en/live-persistence.conf.5:199
+#: en/live-boot.7:164 en/persistence.conf.5:199
msgid "I<live-tools>(7)"
msgstr "I<live-tools>(7)"
#. type: SH
-#: en/live-boot.7:165 en/live-persistence.conf.5:200
+#: en/live-boot.7:165 en/persistence.conf.5:200
#, no-wrap
msgid "HOMEPAGE"
msgstr "PÁGINA WEB"
#. type: Plain text
-#: en/live-boot.7:167 en/live-persistence.conf.5:204
+#: en/live-boot.7:167 en/persistence.conf.5:204
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
"E<lt>I<http://live.debian.net/manual/>E<gt>."
#. type: SH
-#: en/live-boot.7:168 en/live-persistence.conf.5:205
+#: en/live-boot.7:168 en/persistence.conf.5:205
#, no-wrap
msgid "BUGS"
msgstr "ERRORES"
#. type: Plain text
-#: en/live-boot.7:170 en/live-persistence.conf.5:210
+#: en/live-boot.7:170 en/persistence.conf.5:210
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
"Live a la dirección E<lt>I<debian-live@lists.debian.org>E<gt>."
#. type: SH
-#: en/live-boot.7:171 en/live-persistence.conf.5:211
+#: en/live-boot.7:171 en/persistence.conf.5:211
#, no-wrap
msgid "AUTHOR"
msgstr "AUTOR"
#. type: Plain text
-#: en/live-persistence.conf.5:6
+#: en/persistence.conf.5:6
msgid ""
-"B<live-persistence.conf> - Configuration file for persistence media in live-"
-"boot"
+"B<persistence.conf> - Configuration file for persistence media in live-boot"
msgstr ""
-"B<live-persistence.conf> - Fichero para configurar medios de almacenamiento "
-"con persistencia en live-boot"
+"B<persistence.conf> - Fichero para configurar medios de almacenamiento con "
+"persistencia en live-boot"
#. type: Plain text
-#: en/live-persistence.conf.5:13
+#: en/persistence.conf.5:13
msgid ""
"If live-boot probes a persistence volume with the label (or GPT name, or "
"file name, but from now on we will just say \"label\") \"persistence\", that "
-"volume's persistence is fully customizable through the B<live-persistence."
-"conf> file stored on the root of its file system. Any such labeled volume "
-"must have such a file, or it will be ignored."
+"volume's persistence is fully customizable through the B<persistence.conf> "
+"file stored on the root of its file system. Any such labeled volume must "
+"have such a file, or it will be ignored."
msgstr ""
"Si live-boot prueba un volumen persistente con la etiqueta (o nombre GPT, o "
"nombre de fichero, aunque a partir de este momento nos referiremos a él como "
"simplemente \"etiqueta\") \"persistence\", la persistencia de ese volumen es "
-"completamente personalizable a través del fichero B<live-persistence.conf> "
+"completamente personalizable a través del fichero B<persistence.conf> "
"almacenado en la raíz de su sistema de ficheros. Cualquier volumen esa "
"etiqueta debe tener uno de esos ficheros, o si no será ignorado."
#. type: Plain text
-#: en/live-persistence.conf.5:17
+#: en/persistence.conf.5:17
msgid ""
-"The format of B<live-persistence.conf> allows empty lines and lines starting "
-"with a \"#\" (used for comments), both which will be ignored. A so called "
+"The format of B<persistence.conf> allows empty lines and lines starting with "
+"a \"#\" (used for comments), both which will be ignored. A so called "
"\"custom mount\" has the format:"
msgstr ""
-"El formato de B<live-persistence.conf> permite añadir líneas vacias o líneas "
-"que comiencen por \"#\" (usado para los comentarios), ambos serán ignorados. "
-"Un \"montaje personalizado\" tiene el formato:"
+"El formato de B<persistence.conf> permite añadir líneas vacias o líneas que "
+"comiencen por \"#\" (usado para los comentarios), ambos serán ignorados. Un "
+"\"montaje personalizado\" tiene el formato:"
#. type: Plain text
-#: en/live-persistence.conf.5:20
+#: en/persistence.conf.5:20
msgid "I<DIR> [I<OPTION>]..."
msgstr "I<DIR> [I<OPTION>]..."
#. type: Plain text
-#: en/live-persistence.conf.5:24
+#: en/persistence.conf.5:24
msgid ""
"which roughly translates to \"make I<DIR> persistence in the way described "
"by the list of I<OPTION>s\"."
"lista de I<OPTION>s\"."
#. type: Plain text
-#: en/live-persistence.conf.5:35
+#: en/persistence.conf.5:35
msgid ""
"For each custom mount I<DIR> must be an absolute path that cannot contain "
"white spaces or the special . and .. path components, and cannot be /live "
"esto se puede cambiar utilizando las opciones I<OPTION>s."
#. type: Plain text
-#: en/live-persistence.conf.5:48
+#: en/persistence.conf.5:48
msgid ""
"All custom mounts will be done in an order so that no two custom mounts can "
"\"hide\" each other. For instance, if we have the two I<DIR>:s /a and /a/b "
"it would always be the case that /a is mounted first, then /a/b. This "
-"remains true no matter how the lines in B<live-persistence.conf> are "
-"ordered, or if several B<live-persistence.conf> files on different "
-"persistence media are used at the same time. However, it is forbidden for "
-"custom mounts to have their source directory inside the source directory of "
-"another custom mount, so the source directories that are auto-created by "
-"live-boot does not support \"nested\" mounts like /a and /a/b on the same "
-"media. In this case you must use the B<source> option (see below) to make "
-"sure that they are stored in different source directories."
+"remains true no matter how the lines in B<persistence.conf> are ordered, or "
+"if several B<persistence.conf> files on different persistence media are used "
+"at the same time. However, it is forbidden for custom mounts to have their "
+"source directory inside the source directory of another custom mount, so the "
+"source directories that are auto-created by live-boot does not support "
+"\"nested\" mounts like /a and /a/b on the same media. In this case you must "
+"use the B<source> option (see below) to make sure that they are stored in "
+"different source directories."
msgstr ""
"Todos los montajes personalizados serán montados en orden de tal manera que "
"dos montajes personalizados no se \"escondan\" uno al otro. Por ejemplo, si "
"tenemos los dos I<DIR>:s /a y /a/b siempre /a será montado en primer lugar, "
"después /a/b. Esto siempre es así sin importar el orden en que aparezcan las "
-"líneas en B<live-persistence.conf> o incluso si se usan varios ficheros "
-"B<live-persistence.conf> en medios persistentes distintos al mismo tiempo. "
-"Sin embargo, no está permitido que un montaje personalizado tenga su "
-"directorio de origen en el interior del directorio de origen de otro montaje "
+"líneas en B<persistence.conf> o incluso si se usan varios ficheros "
+"B<persistence.conf> en medios persistentes distintos al mismo tiempo. Sin "
+"embargo, no está permitido que un montaje personalizado tenga su directorio "
+"de origen en el interior del directorio de origen de otro montaje "
"personalizado, ya que los directorios de origen que live-boot crea "
"automáticamente no tienen soporte para montajes \"anidados\" como /a y /a/b "
"en el mismo medio. En este caso se debe usar la opción B<source> (ver "
"diferentes."
#. type: Plain text
-#: en/live-persistence.conf.5:56
+#: en/persistence.conf.5:56
msgid ""
"When a source directory doesn't exist on the persistence media for a certain "
"custom mount, it will be created automatically, and permissions and "
"opciones B<link> o B<union> (ver debajo)."
#. type: Plain text
-#: en/live-persistence.conf.5:60
+#: en/persistence.conf.5:60
msgid ""
-"Custom mounts defined in B<live-persistence.conf> accept the following "
-"options in a coma-separated list:"
+"Custom mounts defined in B<persistence.conf> accept the following options in "
+"a coma-separated list:"
msgstr ""
-"Los montajes personalizados definidos en B<live-persistence.conf> aceptan "
-"las siguientes opciones en una lista separada por comas:"
+"Los montajes personalizados definidos en B<persistence.conf> aceptan las "
+"siguientes opciones en una lista separada por comas:"
#. type: IP
-#: en/live-persistence.conf.5:60
+#: en/persistence.conf.5:60
#, no-wrap
msgid "B<source>=I<PATH>"
msgstr "B<source>=I<PATH>"
#. type: Plain text
-#: en/live-persistence.conf.5:69
+#: en/persistence.conf.5:69
msgid ""
"When given, store the persistence changes into I<PATH> on the persistence "
"media. I<PATH> must be a relative path (with respect to the persistence "
"rw>)"
#. type: Plain text
-#: en/live-persistence.conf.5:72
+#: en/persistence.conf.5:72
msgid ""
"The following options are mutually exclusive (only the last given one will "
"be in effect):"
"tendrá efecto):"
#. type: IP
-#: en/live-persistence.conf.5:72
+#: en/persistence.conf.5:72
#, no-wrap
msgid "B<bind>"
msgstr "B<bind>"
#. type: Plain text
-#: en/live-persistence.conf.5:74
+#: en/persistence.conf.5:74
msgid "Bind-mount the source directory to I<DIR>. This is the default."
msgstr ""
"Montar de forma enlazada el directorio de origen a I<DIR>. Esto es así por "
"defecto."
#. type: IP
-#: en/live-persistence.conf.5:74
+#: en/persistence.conf.5:74
#, no-wrap
msgid "B<link>"
msgstr "B<link>"
#. type: Plain text
-#: en/live-persistence.conf.5:83
+#: en/persistence.conf.5:83
msgid ""
"Create the directory structure of the source directory on the persistence "
"media in I<DIR> and create symbolic links from the corresponding place in "
"origen."
#. type: Plain text
-#: en/live-persistence.conf.5:91
+#: en/persistence.conf.5:91
msgid ""
"Effectively B<link> will make only files already in the source directory "
"persistent, not any other files in I<DIR>. These files must be manually "
"home de un usuario."
#. type: IP
-#: en/live-persistence.conf.5:91
+#: en/persistence.conf.5:91
#, no-wrap
msgid "B<union>"
msgstr "B<union>"
#. type: Plain text
-#: en/live-persistence.conf.5:101
+#: en/persistence.conf.5:101
msgid ""
"Save the rw branch of a union on the persistence media, so only the changes "
"are stored persistently. This can potentially reduce disk usage compared to "
"tiene soporte si se utiliza B<union=unionmount>."
#. type: SH
-#: en/live-persistence.conf.5:102
+#: en/persistence.conf.5:102
#, no-wrap
msgid "DIRECTORIES"
msgstr "DIRECTORIOS"
#. type: IP
-#: en/live-persistence.conf.5:103
+#: en/persistence.conf.5:103
#, no-wrap
msgid "B</live/persistence>"
msgstr "B</live/persistence>"
#. type: Plain text
-#: en/live-persistence.conf.5:109
+#: en/persistence.conf.5:109
msgid ""
"All persistence volumes will be mounted here (in a directory corresponding "
-"to the device name). The B<live-persistence.conf> file can easily be edited "
+"to the device name). The B<persistence.conf> file can easily be edited "
"through this mount, as well as any source directories (which is especially "
"practical for custom mounts using the B<link> option)."
msgstr ""
"Aquí se montarán todos los volumenes persistentes (en un directorio que "
-"corresponda con el nombre del dispositivo). El fichero B<live-persistence."
-"conf> se puede editar fácilmente a través de este montaje, así como "
-"cualquier directorio de origen (esto resulta especialmente práctico para los "
-"montajes personalizados usando la opción B<link>)."
+"corresponda con el nombre del dispositivo). El fichero B<persistence.conf> "
+"se puede editar fácilmente a través de este montaje, así como cualquier "
+"directorio de origen (esto resulta especialmente práctico para los montajes "
+"personalizados usando la opción B<link>)."
#. type: SH
-#: en/live-persistence.conf.5:110
+#: en/persistence.conf.5:110
#, no-wrap
msgid "EXAMPLES"
msgstr "EJEMPLOS"
#. type: Plain text
-#: en/live-persistence.conf.5:115
+#: en/persistence.conf.5:115
msgid ""
-"Let's say we have a persistence volume I<VOL> with the a B<live-persistence."
-"conf> file containing the following four lines (numbered for ease of "
-"reference):"
+"Let's say we have a persistence volume I<VOL> with the a B<persistence.conf> "
+"file containing the following four lines (numbered for ease of reference):"
msgstr ""
-"Si tenemos un volumen con persistencia I<VOL> con un fichero B<live-"
-"persistence.conf> que contiene las cuatro lineas siguientes (numeradas para "
-"una mejor referencia):"
+"Si tenemos un volumen con persistencia I<VOL> con un fichero B<persistence."
+"conf>que contiene las cuatro lineas siguientes (numeradas para una mejor "
+"referencia):"
#. type: TP
-#: en/live-persistence.conf.5:115 en/live-persistence.conf.5:129
+#: en/persistence.conf.5:115 en/persistence.conf.5:129
#, no-wrap
msgid "1."
msgstr "1."
#. type: Plain text
-#: en/live-persistence.conf.5:118
+#: en/persistence.conf.5:118
msgid "/home/user1 link,source=config-files/user1"
msgstr "/home/user1 link,source=config-files/user1"
#. type: TP
-#: en/live-persistence.conf.5:118 en/live-persistence.conf.5:133
+#: en/persistence.conf.5:118 en/persistence.conf.5:133
#, no-wrap
msgid "2."
msgstr "2."
#. type: Plain text
-#: en/live-persistence.conf.5:121
+#: en/persistence.conf.5:121
msgid "/home/user2 link,source=config-files/user2"
msgstr "/home/user2 link,source=config-files/user2"
#. type: TP
-#: en/live-persistence.conf.5:121 en/live-persistence.conf.5:137
+#: en/persistence.conf.5:121 en/persistence.conf.5:137
#, no-wrap
msgid "3."
msgstr "3."
#. type: Plain text
-#: en/live-persistence.conf.5:124
+#: en/persistence.conf.5:124
msgid "/home"
msgstr "/home"
#. type: TP
-#: en/live-persistence.conf.5:124 en/live-persistence.conf.5:140
+#: en/persistence.conf.5:124 en/persistence.conf.5:140
#, no-wrap
msgid "4."
msgstr "4."
#. type: Plain text
-#: en/live-persistence.conf.5:127
+#: en/persistence.conf.5:127
msgid "/usr union"
msgstr "/usr union"
#. type: Plain text
-#: en/live-persistence.conf.5:129
+#: en/persistence.conf.5:129
msgid "The corresponding source directories are:"
msgstr "Los directorios de origen correspondientes son:"
#. type: Plain text
-#: en/live-persistence.conf.5:133
+#: en/persistence.conf.5:133
msgid ""
"I<VOL>/config-files/user1 (but it would be I<VOL>/home/user1 without the "
"B<source> option)"
"B<source>)"
#. type: Plain text
-#: en/live-persistence.conf.5:137
+#: en/persistence.conf.5:137
msgid ""
"I<VOL>/config-files/user2 (but it would be I<VOL>/home/user2 without the "
"B<source> option)"
"B<source>)"
#. type: Plain text
-#: en/live-persistence.conf.5:140
+#: en/persistence.conf.5:140
msgid "I<VOL>/home"
msgstr "I<VOL>/home"
#. type: Plain text
-#: en/live-persistence.conf.5:143
+#: en/persistence.conf.5:143
msgid "I<VOL>/usr"
msgstr "I<VOL>/usr"
#. type: Plain text
-#: en/live-persistence.conf.5:146
+#: en/persistence.conf.5:146
msgid ""
"It was necessary to set the B<source> options for 1 and 2, since they "
"otherwise would become nested with 3's source, which is invalid."
"modo resultarían anidados con el origen de 3, lo cual no es válido."
#. type: Plain text
-#: en/live-persistence.conf.5:151
+#: en/persistence.conf.5:151
msgid ""
"Line 3 will be taken care of before line 1 and 2 in order to prevent custom "
"mounts 1 and 2 from being hidden by 3. When line 3 is handled, I<VOL>/home "
"ficheros existen: "
#. type: TP
-#: en/live-persistence.conf.5:151
+#: en/persistence.conf.5:151
#, no-wrap
msgid "a."
msgstr "a."
#. type: Plain text
-#: en/live-persistence.conf.5:154
+#: en/persistence.conf.5:154
msgid "I<VOL>/config-files/user1/.emacs"
msgstr "I<VOL>/config-files/user1/.emacs"
#. type: TP
-#: en/live-persistence.conf.5:154
+#: en/persistence.conf.5:154
#, no-wrap
msgid "b."
msgstr "b."
#. type: Plain text
-#: en/live-persistence.conf.5:157
+#: en/persistence.conf.5:157
msgid "I<VOL>/config-files/user2/.bashrc"
msgstr "I<VOL>/config-files/user2/.bashrc"
#. type: TP
-#: en/live-persistence.conf.5:157
+#: en/persistence.conf.5:157
#, no-wrap
msgid "c."
msgstr "c."
#. type: Plain text
-#: en/live-persistence.conf.5:160
+#: en/persistence.conf.5:160
msgid "I<VOL>/config-files/user2/.ssh/config"
msgstr "I<VOL>/config-files/user2/.ssh/config"
#. type: Plain text
-#: en/live-persistence.conf.5:162
+#: en/persistence.conf.5:162
msgid "Then the following links and directories will be created:"
msgstr "Entonces se crearán los siguientes enlaces y directorios:"
#. type: TP
-#: en/live-persistence.conf.5:162 en/live-persistence.conf.5:165
-#: en/live-persistence.conf.5:171
+#: en/persistence.conf.5:162 en/persistence.conf.5:165
+#: en/persistence.conf.5:171
#, no-wrap
msgid "Link:"
msgstr "Enlace:"
#. type: Plain text
-#: en/live-persistence.conf.5:165
+#: en/persistence.conf.5:165
msgid "/home/user1/.emacs -E<gt> I<VOL>/config-files/user1/.emacs (from a)"
msgstr "/home/user1/.emacs -E<gt> I<VOL>/config-files/user1/.emacs (de a)"
#. type: Plain text
-#: en/live-persistence.conf.5:168
+#: en/persistence.conf.5:168
msgid "/home/user2/.bashrc -E<gt> I<VOL>/config-files/user2/.bashrc (from b)"
msgstr "/home/user2/.bashrc -E<gt> I<VOL>/config-files/user2/.bashrc (de b)"
#. type: TP
-#: en/live-persistence.conf.5:168
+#: en/persistence.conf.5:168
#, no-wrap
msgid "Dir:"
msgstr "Directorio:"
#. type: Plain text
-#: en/live-persistence.conf.5:171
+#: en/persistence.conf.5:171
msgid "/homea/user2/.ssh (from c)"
msgstr "/homea/user2/.ssh (de c)"
#. type: Plain text
-#: en/live-persistence.conf.5:175
+#: en/persistence.conf.5:175
msgid ""
"/home/user2/.ssh/config -E<gt> I<VOL>/config-files/user2/.ssh/config (from c)"
msgstr ""
"/home/user2/.ssh/config -E<gt> I<VOL>/config-files/user2/.ssh/config (de c)"
#. type: Plain text
-#: en/live-persistence.conf.5:181
+#: en/persistence.conf.5:181
msgid ""
-"One could argue, though, that lines 1 and 2 in the example B<live-"
-"persistence.conf> file above are unnecessary since line 3 already would make "
-"all of /home persistent. The B<link> option is intended for situations where "
-"you don't want a complete directory to be persistent, only certain files in "
-"it or its sub-directories."
+"One could argue, though, that lines 1 and 2 in the example B<persistence."
+"conf> file above are unnecessary since line 3 already would make all of /"
+"home persistent. The B<link> option is intended for situations where you "
+"don't want a complete directory to be persistent, only certain files in it "
+"or its sub-directories."
msgstr ""
"Se podría decir, sin embargo, que las líneas 1 y 2 en el fichero de ejemplo "
-"B<live-persistence.conf> anterior son innecesarias ya que la línea 3 ya "
-"crearía el directorio /home persistente. La opción B<link> se utiliza en "
+"B<persistence.conf> anterior son innecesarias ya que la línea 3 ya crearía "
+"el directorio /home persistente. La opción B<link> se utiliza en "
"situaciones en las que no se desea guardar de forma persistente un "
"directorio completo, sino únicamente algunos ficheros o subdirectorios "
"incluidos en él."
#. type: Plain text
-#: en/live-persistence.conf.5:190
+#: en/persistence.conf.5:190
msgid ""
"Line 4 can be mounted at any time since its I<DIR> (and source directory) is "
"completely disjoint from all the other custom mounts. When mounted, I<VOL>/"
"tendría que ser copiado en I<VOL>/usr durante la preinstalación inicial."
#. type: Plain text
-#: en/live-persistence.conf.5:193
+#: en/persistence.conf.5:193
msgid "I<live-boot>(7)"
msgstr "I<live-boot>(7)"
#. type: Plain text
-#: en/live-persistence.conf.5:213
+#: en/persistence.conf.5:213
msgid ""
-"live-persistence.conf was written by anonym E<lt>I<anonym@lavabit.com>E<gt> "
-"for the Debian project."
+"persistence.conf was written by anonym E<lt>I<anonym@lavabit.com>E<gt> for "
+"the Debian project."
msgstr ""
-"live-persistence.conf fue escrito por anonym E<lt>I<anonym@lavabit.com>E<gt> "
-"para el proyecto Debian."
+"persistence.conf fue escrito por anonym E<lt>I<anonym@lavabit.com>E<gt> para "
+"el proyecto Debian."
[po4a_langs] de es
[po4a_paths] pot/$master.pot $lang:po/$lang/$master.po
[type: man] en/live-boot.7 $lang:$lang/live-boot.$lang.7
-[type: man] en/live-persistence.conf.5 $lang:$lang/live-persistence.conf.$lang.5
+[type: man] en/persistence.conf.5 $lang:$lang/persistence.conf.$lang.5
msgid ""
msgstr ""
"Project-Id-Version: live-boot VERSION\n"
-"POT-Creation-Date: 2012-09-26 14:38+0300\n"
+"POT-Creation-Date: 2012-09-27 13:22+0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Transfer-Encoding: 8bit\n"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "LIVE-BOOT"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "2012-09-26"
+msgid "2012-09-27"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "3.0~b3-1"
+msgid "3.0~b4-1"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "Debian Live Project"
msgstr ""
#. type: SH
-#: en/live-boot.7:3 en/live-persistence.conf.5:3
+#: en/live-boot.7:3 en/persistence.conf.5:3
#, no-wrap
msgid "NAME"
msgstr ""
msgstr ""
#. type: SH
-#: en/live-boot.7:6 en/live-persistence.conf.5:7
+#: en/live-boot.7:6 en/persistence.conf.5:7
#, no-wrap
msgid "DESCRIPTION"
msgstr ""
msgstr ""
#. type: SH
-#: en/live-boot.7:28 en/live-persistence.conf.5:57
+#: en/live-boot.7:28 en/persistence.conf.5:57
#, no-wrap
msgid "OPTIONS"
msgstr ""
"live-boot will probe devices for persistence media. These can be partitions "
"(with the correct GPT name), filesystems (with the correct label) or image "
"files (with the correct file name). Overlays are labeled/named \"persistence"
-"\" (see I<live-persistence.conf>(5)). Overlay image files have extensions "
-"which determines their filesystem, e.g. \"persistence.ext4\"."
+"\" (see I<persistence.conf>(5)). Overlay image files have extensions which "
+"determines their filesystem, e.g. \"persistence.ext4\"."
msgstr ""
#. type: IP
#: en/live-boot.7:131
msgid ""
"This parameter will make live-boot to show on \"/\" the ro filesystems "
-"(mostly compressed) on \"/live\". This is not enabled by default because "
+"(mostly compressed) on \"/lib/live\". This is not enabled by default because "
"could lead to problems by applications like \"mono\" which store binary "
"paths on installation."
msgstr ""
#. type: IP
#: en/live-boot.7:154
#, no-wrap
-msgid "B<live-persistence.conf>"
+msgid "B<persistence.conf>"
msgstr ""
#. type: SH
-#: en/live-boot.7:156 en/live-persistence.conf.5:191
+#: en/live-boot.7:156 en/persistence.conf.5:191
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
#: en/live-boot.7:158
-msgid "I<live-persistence.conf>(5)"
+msgid "I<persistence.conf>(5)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:160 en/live-persistence.conf.5:195
+#: en/live-boot.7:160 en/persistence.conf.5:195
msgid "I<live-build>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:162 en/live-persistence.conf.5:197
+#: en/live-boot.7:162 en/persistence.conf.5:197
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:164 en/live-persistence.conf.5:199
+#: en/live-boot.7:164 en/persistence.conf.5:199
msgid "I<live-tools>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:165 en/live-persistence.conf.5:200
+#: en/live-boot.7:165 en/persistence.conf.5:200
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:167 en/live-persistence.conf.5:204
+#: en/live-boot.7:167 en/persistence.conf.5:204
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
msgstr ""
#. type: SH
-#: en/live-boot.7:168 en/live-persistence.conf.5:205
+#: en/live-boot.7:168 en/persistence.conf.5:205
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:170 en/live-persistence.conf.5:210
+#: en/live-boot.7:170 en/persistence.conf.5:210
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
msgstr ""
#. type: SH
-#: en/live-boot.7:171 en/live-persistence.conf.5:211
+#: en/live-boot.7:171 en/persistence.conf.5:211
#, no-wrap
msgid "AUTHOR"
msgstr ""
msgid ""
msgstr ""
"Project-Id-Version: live-boot VERSION\n"
-"POT-Creation-Date: 2012-09-26 14:38+0300\n"
+"POT-Creation-Date: 2012-09-27 13:22+0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Transfer-Encoding: 8bit\n"
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "LIVE-BOOT"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "2012-09-26"
+msgid "2012-09-27"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
-msgid "3.0~b3-1"
+msgid "3.0~b4-1"
msgstr ""
#. type: TH
-#: en/live-boot.7:1 en/live-persistence.conf.5:1
+#: en/live-boot.7:1 en/persistence.conf.5:1
#, no-wrap
msgid "Debian Live Project"
msgstr ""
#. type: SH
-#: en/live-boot.7:3 en/live-persistence.conf.5:3
+#: en/live-boot.7:3 en/persistence.conf.5:3
#, no-wrap
msgid "NAME"
msgstr ""
#. type: SH
-#: en/live-boot.7:6 en/live-persistence.conf.5:7
+#: en/live-boot.7:6 en/persistence.conf.5:7
#, no-wrap
msgid "DESCRIPTION"
msgstr ""
#. type: SH
-#: en/live-boot.7:28 en/live-persistence.conf.5:57
+#: en/live-boot.7:28 en/persistence.conf.5:57
#, no-wrap
msgid "OPTIONS"
msgstr ""
#. type: SH
-#: en/live-boot.7:156 en/live-persistence.conf.5:191
+#: en/live-boot.7:156 en/persistence.conf.5:191
#, no-wrap
msgid "SEE ALSO"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:160 en/live-persistence.conf.5:195
+#: en/live-boot.7:160 en/persistence.conf.5:195
msgid "I<live-build>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:162 en/live-persistence.conf.5:197
+#: en/live-boot.7:162 en/persistence.conf.5:197
msgid "I<live-config>(7)"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:164 en/live-persistence.conf.5:199
+#: en/live-boot.7:164 en/persistence.conf.5:199
msgid "I<live-tools>(7)"
msgstr ""
#. type: SH
-#: en/live-boot.7:165 en/live-persistence.conf.5:200
+#: en/live-boot.7:165 en/persistence.conf.5:200
#, no-wrap
msgid "HOMEPAGE"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:167 en/live-persistence.conf.5:204
+#: en/live-boot.7:167 en/persistence.conf.5:204
msgid ""
"More information about live-boot and the Debian Live project can be found on "
"the homepage at E<lt>I<http://live.debian.net/>E<gt> and in the manual at "
msgstr ""
#. type: SH
-#: en/live-boot.7:168 en/live-persistence.conf.5:205
+#: en/live-boot.7:168 en/persistence.conf.5:205
#, no-wrap
msgid "BUGS"
msgstr ""
#. type: Plain text
-#: en/live-boot.7:170 en/live-persistence.conf.5:210
+#: en/live-boot.7:170 en/persistence.conf.5:210
msgid ""
"Bugs can be reported by submitting a bugreport for the live-boot package in "
"the Debian Bug Tracking System at E<lt>I<http://bugs.debian.org/>E<gt> or by "
msgstr ""
#. type: SH
-#: en/live-boot.7:171 en/live-persistence.conf.5:211
+#: en/live-boot.7:171 en/persistence.conf.5:211
#, no-wrap
msgid "AUTHOR"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:6
+#: en/persistence.conf.5:6
msgid ""
-"B<live-persistence.conf> - Configuration file for persistence media in live-"
-"boot"
+"B<persistence.conf> - Configuration file for persistence media in live-boot"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:13
+#: en/persistence.conf.5:13
msgid ""
"If live-boot probes a persistence volume with the label (or GPT name, or "
"file name, but from now on we will just say \"label\") \"persistence\", that "
-"volume's persistence is fully customizable through the B<live-persistence."
-"conf> file stored on the root of its file system. Any such labeled volume "
-"must have such a file, or it will be ignored."
+"volume's persistence is fully customizable through the B<persistence.conf> "
+"file stored on the root of its file system. Any such labeled volume must "
+"have such a file, or it will be ignored."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:17
+#: en/persistence.conf.5:17
msgid ""
-"The format of B<live-persistence.conf> allows empty lines and lines starting "
-"with a \"#\" (used for comments), both which will be ignored. A so called "
+"The format of B<persistence.conf> allows empty lines and lines starting with "
+"a \"#\" (used for comments), both which will be ignored. A so called "
"\"custom mount\" has the format:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:20
+#: en/persistence.conf.5:20
msgid "I<DIR> [I<OPTION>]..."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:24
+#: en/persistence.conf.5:24
msgid ""
"which roughly translates to \"make I<DIR> persistence in the way described "
"by the list of I<OPTION>s\"."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:35
+#: en/persistence.conf.5:35
msgid ""
"For each custom mount I<DIR> must be an absolute path that cannot contain "
"white spaces or the special . and .. path components, and cannot be /live "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:48
+#: en/persistence.conf.5:48
msgid ""
"All custom mounts will be done in an order so that no two custom mounts can "
"\"hide\" each other. For instance, if we have the two I<DIR>:s /a and /a/b "
"it would always be the case that /a is mounted first, then /a/b. This "
-"remains true no matter how the lines in B<live-persistence.conf> are "
-"ordered, or if several B<live-persistence.conf> files on different "
-"persistence media are used at the same time. However, it is forbidden for "
-"custom mounts to have their source directory inside the source directory of "
-"another custom mount, so the source directories that are auto-created by "
-"live-boot does not support \"nested\" mounts like /a and /a/b on the same "
-"media. In this case you must use the B<source> option (see below) to make "
-"sure that they are stored in different source directories."
+"remains true no matter how the lines in B<persistence.conf> are ordered, or "
+"if several B<persistence.conf> files on different persistence media are used "
+"at the same time. However, it is forbidden for custom mounts to have their "
+"source directory inside the source directory of another custom mount, so the "
+"source directories that are auto-created by live-boot does not support "
+"\"nested\" mounts like /a and /a/b on the same media. In this case you must "
+"use the B<source> option (see below) to make sure that they are stored in "
+"different source directories."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:56
+#: en/persistence.conf.5:56
msgid ""
"When a source directory doesn't exist on the persistence media for a certain "
"custom mount, it will be created automatically, and permissions and "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:60
+#: en/persistence.conf.5:60
msgid ""
-"Custom mounts defined in B<live-persistence.conf> accept the following "
-"options in a coma-separated list:"
+"Custom mounts defined in B<persistence.conf> accept the following options in "
+"a coma-separated list:"
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:60
+#: en/persistence.conf.5:60
#, no-wrap
msgid "B<source>=I<PATH>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:69
+#: en/persistence.conf.5:69
msgid ""
"When given, store the persistence changes into I<PATH> on the persistence "
"media. I<PATH> must be a relative path (with respect to the persistence "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:72
+#: en/persistence.conf.5:72
msgid ""
"The following options are mutually exclusive (only the last given one will "
"be in effect):"
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:72
+#: en/persistence.conf.5:72
#, no-wrap
msgid "B<bind>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:74
+#: en/persistence.conf.5:74
msgid "Bind-mount the source directory to I<DIR>. This is the default."
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:74
+#: en/persistence.conf.5:74
#, no-wrap
msgid "B<link>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:83
+#: en/persistence.conf.5:83
msgid ""
"Create the directory structure of the source directory on the persistence "
"media in I<DIR> and create symbolic links from the corresponding place in "
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:91
+#: en/persistence.conf.5:91
msgid ""
"Effectively B<link> will make only files already in the source directory "
"persistent, not any other files in I<DIR>. These files must be manually "
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:91
+#: en/persistence.conf.5:91
#, no-wrap
msgid "B<union>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:101
+#: en/persistence.conf.5:101
msgid ""
"Save the rw branch of a union on the persistence media, so only the changes "
"are stored persistently. This can potentially reduce disk usage compared to "
msgstr ""
#. type: SH
-#: en/live-persistence.conf.5:102
+#: en/persistence.conf.5:102
#, no-wrap
msgid "DIRECTORIES"
msgstr ""
#. type: IP
-#: en/live-persistence.conf.5:103
+#: en/persistence.conf.5:103
#, no-wrap
msgid "B</live/persistence>"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:109
+#: en/persistence.conf.5:109
msgid ""
"All persistence volumes will be mounted here (in a directory corresponding "
-"to the device name). The B<live-persistence.conf> file can easily be edited "
+"to the device name). The B<persistence.conf> file can easily be edited "
"through this mount, as well as any source directories (which is especially "
"practical for custom mounts using the B<link> option)."
msgstr ""
#. type: SH
-#: en/live-persistence.conf.5:110
+#: en/persistence.conf.5:110
#, no-wrap
msgid "EXAMPLES"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:115
+#: en/persistence.conf.5:115
msgid ""
-"Let's say we have a persistence volume I<VOL> with the a B<live-persistence."
-"conf> file containing the following four lines (numbered for ease of "
-"reference):"
+"Let's say we have a persistence volume I<VOL> with the a B<persistence.conf> "
+"file containing the following four lines (numbered for ease of reference):"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:115 en/live-persistence.conf.5:129
+#: en/persistence.conf.5:115 en/persistence.conf.5:129
#, no-wrap
msgid "1."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:118
+#: en/persistence.conf.5:118
msgid "/home/user1 link,source=config-files/user1"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:118 en/live-persistence.conf.5:133
+#: en/persistence.conf.5:118 en/persistence.conf.5:133
#, no-wrap
msgid "2."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:121
+#: en/persistence.conf.5:121
msgid "/home/user2 link,source=config-files/user2"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:121 en/live-persistence.conf.5:137
+#: en/persistence.conf.5:121 en/persistence.conf.5:137
#, no-wrap
msgid "3."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:124
+#: en/persistence.conf.5:124
msgid "/home"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:124 en/live-persistence.conf.5:140
+#: en/persistence.conf.5:124 en/persistence.conf.5:140
#, no-wrap
msgid "4."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:127
+#: en/persistence.conf.5:127
msgid "/usr union"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:129
+#: en/persistence.conf.5:129
msgid "The corresponding source directories are:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:133
+#: en/persistence.conf.5:133
msgid ""
"I<VOL>/config-files/user1 (but it would be I<VOL>/home/user1 without the "
"B<source> option)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:137
+#: en/persistence.conf.5:137
msgid ""
"I<VOL>/config-files/user2 (but it would be I<VOL>/home/user2 without the "
"B<source> option)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:140
+#: en/persistence.conf.5:140
msgid "I<VOL>/home"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:143
+#: en/persistence.conf.5:143
msgid "I<VOL>/usr"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:146
+#: en/persistence.conf.5:146
msgid ""
"It was necessary to set the B<source> options for 1 and 2, since they "
"otherwise would become nested with 3's source, which is invalid."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:151
+#: en/persistence.conf.5:151
msgid ""
"Line 3 will be taken care of before line 1 and 2 in order to prevent custom "
"mounts 1 and 2 from being hidden by 3. When line 3 is handled, I<VOL>/home "
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:151
+#: en/persistence.conf.5:151
#, no-wrap
msgid "a."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:154
+#: en/persistence.conf.5:154
msgid "I<VOL>/config-files/user1/.emacs"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:154
+#: en/persistence.conf.5:154
#, no-wrap
msgid "b."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:157
+#: en/persistence.conf.5:157
msgid "I<VOL>/config-files/user2/.bashrc"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:157
+#: en/persistence.conf.5:157
#, no-wrap
msgid "c."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:160
+#: en/persistence.conf.5:160
msgid "I<VOL>/config-files/user2/.ssh/config"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:162
+#: en/persistence.conf.5:162
msgid "Then the following links and directories will be created:"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:162 en/live-persistence.conf.5:165
-#: en/live-persistence.conf.5:171
+#: en/persistence.conf.5:162 en/persistence.conf.5:165
+#: en/persistence.conf.5:171
#, no-wrap
msgid "Link:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:165
+#: en/persistence.conf.5:165
msgid "/home/user1/.emacs -E<gt> I<VOL>/config-files/user1/.emacs (from a)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:168
+#: en/persistence.conf.5:168
msgid "/home/user2/.bashrc -E<gt> I<VOL>/config-files/user2/.bashrc (from b)"
msgstr ""
#. type: TP
-#: en/live-persistence.conf.5:168
+#: en/persistence.conf.5:168
#, no-wrap
msgid "Dir:"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:171
+#: en/persistence.conf.5:171
msgid "/homea/user2/.ssh (from c)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:175
+#: en/persistence.conf.5:175
msgid ""
"/home/user2/.ssh/config -E<gt> I<VOL>/config-files/user2/.ssh/config (from c)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:181
+#: en/persistence.conf.5:181
msgid ""
-"One could argue, though, that lines 1 and 2 in the example B<live-"
-"persistence.conf> file above are unnecessary since line 3 already would make "
-"all of /home persistent. The B<link> option is intended for situations where "
-"you don't want a complete directory to be persistent, only certain files in "
-"it or its sub-directories."
+"One could argue, though, that lines 1 and 2 in the example B<persistence."
+"conf> file above are unnecessary since line 3 already would make all of /"
+"home persistent. The B<link> option is intended for situations where you "
+"don't want a complete directory to be persistent, only certain files in it "
+"or its sub-directories."
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:190
+#: en/persistence.conf.5:190
msgid ""
"Line 4 can be mounted at any time since its I<DIR> (and source directory) is "
"completely disjoint from all the other custom mounts. When mounted, I<VOL>/"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:193
+#: en/persistence.conf.5:193
msgid "I<live-boot>(7)"
msgstr ""
#. type: Plain text
-#: en/live-persistence.conf.5:213
+#: en/persistence.conf.5:213
msgid ""
-"live-persistence.conf was written by anonym E<lt>I<anonym@lavabit.com>E<gt> "
-"for the Debian project."
+"persistence.conf was written by anonym E<lt>I<anonym@lavabit.com>E<gt> for "
+"the Debian project."
msgstr ""
# set -e
# Reading configuration file from filesystem and live-media
-for _FILE in /etc/live/boot.conf /etc/live/boot/* \
- /live/image/live/boot.conf /live/image/live/boot/*
+for _FILE in /etc/live/boot.conf /etc/live/boot/*
do
if [ -e "${_FILE}" ]
then
old_root_overlay_label="live-rw"
old_home_overlay_label="home-rw"
custom_overlay_label="persistence"
-persistence_list="live-persistence.conf"
+persistence_list="persistence.conf"
if [ ! -f /live.vars ]
then
if [ -n "${ROOT_PID}" ]
then
- echo "${ROOT_PID}" > "${rootmnt}"/live/root.pid
+ echo "${ROOT_PID}" > "${rootmnt}"/lib/live/root.pid
fi
log_end_msg
esac
# Move to the new root filesystem so that programs there can get at it.
- mkdir -p /root/live/image
- mount --move /live/image /root/live/image
+ mkdir -p /root/lib/live/image
+ mount --move /live/image /root/lib/live/image
# aufs2 in kernel versions around 2.6.33 has a regression:
# directories can't be accessed when read for the first the time,
# Move findiso directory to the new root filesystem so that programs there can get at it.
if [ -d /live/findiso ]
then
- mkdir -p /root/live/findiso
- mount -n --move /live/findiso /root/live/findiso
+ mkdir -p /root/lib/live/findiso
+ mount -n --move /live/findiso /root/lib/live/findiso
fi
# if we do not unmount the ISO we can't run "fsck /dev/ice" later on
then
losetup -d /dev/loop0
- if is_mountpoint /root/live/findiso
+ if is_mountpoint /root/lib/live/findiso
then
- umount /root/live/findiso
- rmdir --ignore-fail-on-non-empty /root/live/findiso \
+ umount /root/lib/live/findiso
+ rmdir --ignore-fail-on-non-empty /root/lib/live/findiso \
>/dev/null 2>&1 || true
fi
fi
get_custom_mounts ()
{
- # Side-effect: leaves $devices with live-persistence.conf mounted in /live/persistence
+ # Side-effect: leaves $devices with persistence.conf mounted in /live/persistence
# Side-effect: prints info to file $custom_mounts
local custom_mounts=${1}
done
fi
- # make /root/live writable for moving filesystems
- mkdir -p "${rootmnt}/live"
- mount -t tmpfs tmpfs "${rootmnt}/live"
+ # make /root/lib/live writable for moving filesystems
+ mkdir -p "${rootmnt}/lib/live"
+ mount -t tmpfs tmpfs "${rootmnt}/lib/live"
# move all mountpoints to root filesystem
for _DIRECTORY in rofs persistence
do
if [ -d "/live/${_DIRECTORY}" ]
then
- mkdir -p "${rootmnt}/live/${_DIRECTORY}"
+ mkdir -p "${rootmnt}/lib/live/${_DIRECTORY}"
for _MOUNT in $(ls /live/${_DIRECTORY})
do
- mkdir -p "${rootmnt}/live/${_DIRECTORY}/${_MOUNT}"
- mount -o move "/live/${_DIRECTORY}/${_MOUNT}" "${rootmnt}/live/${_DIRECTORY}/${_MOUNT}" > /dev/null 2>&1 || \
- mount -o bind "/live/${_DIRECTORY}/${_MOUNT}" "${rootmnt}/live/${_DIRECTORY}/${_MOUNT}" || \
- log_warning_msg "W: failed to mount /live/${_DIRECTORY}/${_MOUNT} to ${rootmnt}/live/${_DIRECTORY}/${_MOUNT}"
+ mkdir -p "${rootmnt}/lib/live/${_DIRECTORY}/${_MOUNT}"
+ mount -o move "/live/${_DIRECTORY}/${_MOUNT}" "${rootmnt}/lib/live/${_DIRECTORY}/${_MOUNT}" > /dev/null 2>&1 || \
+ mount -o bind "/live/${_DIRECTORY}/${_MOUNT}" "${rootmnt}/lib/live/${_DIRECTORY}/${_MOUNT}" || \
+ log_warning_msg "W: failed to mount /live/${_DIRECTORY}/${_MOUNT} to ${rootmnt}/lib/live/${_DIRECTORY}/${_MOUNT}"
done
fi
done
- mkdir -p "${rootmnt}/live/overlay"
- mount -o move /live/overlay "${rootmnt}/live/overlay" > /dev/null 2>&1 || \
- mount -o bind /overlay "${rootmnt}/live/overlay" || \
- log_warning_msg "W: failed to mount /overlay to ${rootmnt}/live/overlay"
+ mkdir -p "${rootmnt}/lib/live/overlay"
+ mount -o move /live/overlay "${rootmnt}/lib/live/overlay" > /dev/null 2>&1 || \
+ mount -o bind /live/overlay "${rootmnt}/lib/live/overlay" || \
+ log_warning_msg "W: failed to mount /live/overlay to ${rootmnt}/lib/live/overlay"
}
projects / live-boot-grml.git / commitdiff