2 # mgetty configuration file
4 # this is a sample configuration file, see mgetty.info for details
6 # comment lines start with a "#", empty lines are ignored
9 # ----- global section -----
11 # In this section, you put the global defaults, per-port stuff is below
14 # set the global debug level to "4" (default from policy.h)
17 # set the local fax station id
20 # access the modem(s) with 38400 bps
23 # use an alternate issue file, to avoid being bitten by linuxlogo
24 issue-file /etc/issue.mgetty
26 # use these options to make the /dev/tty-device owned by "uucp.uucp"
27 # and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!*
32 # use these options to make incoming faxes owned by "root.uucp"
33 # and mode "rw-r-----" (0640). *LEADING ZERO NEEDED!*
39 # ----- port specific section -----
41 # Here you can put things that are valid only for one line, not the others
44 # Zoom V.FX 28.8, connected to ttyS0: don't do fax, less logging
50 # some other Rockwell modem, needs "switchbd 19200" to receive faxes
51 # properly (otherwise it will fail with "timeout").
57 # ZyXEL 2864, connected to ttyS2: maximum debugging, grab statistics
61 # init-chat "" \d\d\d+++\d\d\dAT&FS2=255 OK ATN3S0=0S13.2=1 OK
62 # statistics-chat "" AT OK ATI2 OK
63 # statistics-file /var/log/statistics.ttyS2
66 # direct connection of a VT100 terminal which doesn't like DTR drops
67 # ("direct" meaning "*no* *modem*". NEVER enable "direct yes" on modem lines!)